scholarly journals Bioethanol from Lignocellulosic Biomass: Current Findings Determine Research Priorities

2014 ◽  
Vol 2014 ◽  
pp. 1-13 ◽  
Author(s):  
Qian Kang ◽  
Lise Appels ◽  
Tianwei Tan ◽  
Raf Dewil

“Second generation” bioethanol, with lignocellulose material as feedstock, is a promising alternative for first generation bioethanol. This paper provides an overview of the current status and reveals the bottlenecks that hamper its implementation. The current literature specifies a conversion of biomass to bioethanol of 30 to ~50% only. Novel processes increase the conversion yield to about 92% of the theoretical yield. New combined processes reduce both the number of operational steps and the production of inhibitors. Recent advances in genetically engineered microorganisms are promising for higher alcohol tolerance and conversion efficiency. By combining advanced systems and by intensive additional research to eliminate current bottlenecks, second generation bioethanol could surpass the traditional first generation processes.

2002 ◽  
Vol 68 (8) ◽  
pp. 3790-3794 ◽  
Author(s):  
Bruce E. Tabashnik ◽  
Timothy J. Dennehy ◽  
Maria A. Sims ◽  
Karen Larkin ◽  
Graham P. Head ◽  
...  

ABSTRACT Crops genetically engineered to produce Bacillus thuringiensis toxins for insect control can reduce use of conventional insecticides, but insect resistance could limit the success of this technology. The first generation of transgenic cotton with B. thuringiensis produces a single toxin, Cry1Ac, that is highly effective against susceptible larvae of pink bollworm (Pectinophora gossypiella), a major cotton pest. To counter potential problems with resistance, second-generation transgenic cotton that produces B. thuringiensis toxin Cry2Ab alone or in combination with Cry1Ac has been developed. In greenhouse bioassays, a pink bollworm strain selected in the laboratory for resistance to Cry1Ac survived equally well on transgenic cotton with Cry1Ac and on cotton without Cry1Ac. In contrast, Cry1Ac-resistant pink bollworm had little or no survival on second-generation transgenic cotton with Cry2Ab alone or with Cry1Ac plus Cry2Ab. Artificial diet bioassays showed that resistance to Cry1Ac did not confer strong cross-resistance to Cry2Aa. Strains with >90% larval survival on diet with 10 μg of Cry1Ac per ml showed 0% survival on diet with 3.2 or 10 μg of Cry2Aa per ml. However, the average survival of larvae fed a diet with 1 μg of Cry2Aa per ml was higher for Cry1Ac-resistant strains (2 to 10%) than for susceptible strains (0%). If plants with Cry1Ac plus Cry2Ab are deployed while genes that confer resistance to each of these toxins are rare, and if the inheritance of resistance to both toxins is recessive, the efficacy of transgenic cotton might be greatly extended.


Author(s):  
Adam Kupczyk ◽  
Joanna Mączyńska ◽  
Michał Sikora ◽  
Karol Tucki ◽  
Tomasz Żelaziński

The current state and the future of the biofuels for transport sectors in Poland were presented in the paper. Because of the importance of legal conditions, crucial directives and acts affecting the shape of these sectors were discussed. The scoring multicriteria M.E. Porter method was used to research attractiveness of the national biofuel sectors, i.e. the sectors of biodiesel and bioethanol produced from edible material (so-called first gene­ration biofuels) as well as the sector of bioethanol produced from inedible material, mainly from lignocellulose (so-called second generation biofuel). Various factors of macro- and microenvironment of first generation biofuels caused regular reduction of their attractiveness. However, the sector of second generation bioethanol, which is not produced at industrial scale in Poland now, is characterized by relatively high and growing attractiveness.


2013 ◽  
pp. 71-75
Author(s):  
Zoltán Balla

The biomass is such a row material that is available in large quantities and it can be utilizied by the biotechnology in the future. Nowadays the technology which can process ligno cellulose and break down into fermentable sugars is being researched. One possible field of use of biomass is the liquid fuel production such as ethanol production. Based on the literary life cycle analysis, I compared the starch-based (first generation) to cellulose-based (second generation) bioethanol production in my study considering into account various environmental factors (land use, raw material production, energy balance). After my examination I came to the conclusion that the use of bioethanol, independent of its production technology, is favorable from environmental point of view but the application of second generation bioethanol has greater environmentally benefits.


2021 ◽  
Vol 11 (1) ◽  
pp. 275-285
Author(s):  
Yasindra Sandamini Chandrasiri ◽  
Lakshika Iroshani Weerasinghe ◽  
Tharindu Madusanka ◽  
Pathmalal Manage

The demand for more environmentally friendly alternative renewable fuels is growing as fossil fuel resources are depleting significantly. Consequently, bioethanol has attracted interest as a potentially viable fuel. The key steps in second-generation bioethanol production include pretreatment, saccharification, and fermentation. The present study employed simultaneous saccharification and fermentation (SSF) of cellulose through bacterial pathways to generate second-generation bioethanol utilizing corncobs and paper waste as lignocellulosic biomass. Mechanical and chemical pretreatments were applied to both biomasses. Then, two bacterial strains, Bacillus sp. and Norcadiopsis sp., hydrolysed the pretreated biomass and fermented it along with Achromobacter sp., which was isolated and characterized from a previous study. Bioethanol production followed by 72 h of biomass hydrolysis employing Bacillus sp. and Norcadiopsis sp., and then 72 h of fermentation using Achromobacter sp. Using solid phase micro extraction combined with GCMS the ethanol content was quantified. SSF of alkaline pretreated paper waste hydrolysed by Bacillus sp. following the fermentation by Achromobacter sp. showed the maximum ethanol percentage of 0.734±0.154. Alkaline pretreated corncobs hydrolyzed by Norcadiopsis sp. yielded the lowest ethanol percentage of 0.155±0.154. The results of the study revealed that paper waste is the preferred feedstock for generating second-generation bioethanol. To study the possible use of ethanol-diesel blends as an alternative biofuel E2, E5, E7, and E10 blend emulsions were prepared mixing commercially available diesel with ethanol. The evaluated physico-chemical characteristics of the ethanol-diesel emulsions fulfilled the Ceypetco requirements except for the flashpoint revealing that the lower ethanol-diesel blends are a promising alternative to transport fuels. As a result, the current study suggests that second generation bioethanol could be used as a renewable energy source to help alleviate the energy crisis..


Author(s):  
Nazila A. Rahimova ◽  
Vugar H. Abdullayev

The objects of the study are stages of development and modern state. In general terms, expert systems are knowledge-based systems. This paper focuses on the components and principles of expert systems. Expert systems are also described. The components of expert systems include knowledge base, logical impact mechanism, user interface and decision-making. In addition, this article describes the capabilities of expert systems. One challenge is to identify the future prospects of expert systems. The research examined the expert system and its significance. It also focuses on generations of expert systems. The first generation of expert systems includes systems created before 1990. This article discusses SAINT, DENDRAL and HEARSAY-1. The features of this expert systems are also discussed here. First-generation expert systems are research prototypes. As a result, the foundations of artificial intelligence were developed. Mostly first-generation expert systems were used as a passive assistant expert. The second generation of expert systems refers to systems created since 1990. Features of second-generation expert systems include dynamism, interactivity, and processing of disparate knowledge. Unlike first-generation expert systems, these systems are able to test the completeness of the knowledge base, to process fuzzy knowledge. Their main difference is the ability to integrate second-generation expert systems with existing systems. At the moment, statistical and dynamic expert systems are distinguished. This article describes the current status of both types. Here are also discussed the tools of statistical and dynamic expert systems. At the end, possible prospects of expert systems are received.


2000 ◽  
Vol 8 (2) ◽  
pp. 54-67 ◽  
Author(s):  
Walter Peters

The survival properties of silicone gel breast implants are dependent on their vintage (year of manufacture), duration in situ and manufacturer. A total of 527 gel implants have been explanted and analyzed in the author's laboratories. Of the 28 first-generation implants (1963 to 1972), 27 (96.4%) remained intact after 14 to 28 years in situ (mean 20.8 years). Of the 216 second-generation implants (1973 to mid-1980s) that were explanted from 1992 to 1998, 158 (73%) had disrupted. Kaplan-Meier survival curves demonstrated significantly different survival properties among second-generation manufacturers. Surgitek implants were by far the least durable. After 14 years, all second-generation Surgitek implants had disrupted. By contrast, after 20 years, about half of the Dow Corning and Heyer-Schulte implants remained intact. Among third-generation implants (mid-1980s to 1992), 43 of 46 (93.4%) remained intact after a mean of 6.3 years (range three to 12 years). The three disruptions were Surgitek implants. Implants from other manufacturers remained intact. However, the disruption frequencies of third-generation implants have yet to be measured over the relevant periods of time. Survival patterns appeared to be related to the thickness of the elastomeric shell of the three generations of implants. Mechanical strength analyses of the elastomeric shells of explants have exhibited little or no large scale material degradation, even after as long as 28 years in situ. The mechanism of implant disruption likely involves the ‘fold flaw’ theory, whereby an internal abrasion can develop over time at the site of a fold in the implant wall. Diagnosis of disruption is difficult. Mammography is helpful only if there has been extravasation of silicone gel into breast tissue. Extravasation was observed in only 4.2% of second-generation implants removed from 1992 to 1998. It was not seen with first- or third-generation implants. Ultrasound analyses are not generally helpful to predict disruption because they are very operator dependent and because capsular contracture causes folds in the implant wall, which result in false positives. Magnetic resonance imaging is the most accurate imaging modality to detect implant disruption. However, this technology is not indicated for monitoring implant status because it is too costly and time consuming, and because it has significant limitations, particularly with first-generation and textured implants. Careful explantation and direct visual examination are the standards for diagnosing gel implant disruption. Many implant disruptions are likely ‘silent’, with no specific symptoms or clinical findings. After disruption, none of the following are elevated above the levels seen in control women without implant exposure: serum autoantibodies, blood and serum silicon, and the incidence of breast cancer, autoimmune disease or any other medical disease. There is no evidence to support the existence of any ‘novel’ or ‘atypical’ syndrome associated with gel implants. Women over 30 years of age with breast implants require regular monitoring for breast cancer detection. This should include monthly breast self examination and annual clinical breast examination. In addition, women over 50 years old require annual eight-view mammographic assessment using the implant displacement technique. Even then, breast implants have been shown to interfere with complete imaging, particularly if the implants are subglandular, large or associated with significant capsular contracture. A logical approach to explantation should involve consideration of a patient's personal concerns and anxiety, her implant vintage, the plane of insertion of her implants, her current clinical status and whether she chooses to replace her gel implants. Women requesting explantation require extensive information before deciding on surgery. At explantation, capsulectomy seems to be indicated if there is capsular calcification or major capsular thickening. (Pour le résumé, voir page suivante)


2016 ◽  
Vol 1 (1) ◽  
pp. 105-118
Author(s):  
Anita Pugliese ◽  
Julie Ray ◽  
Neli Esipova

This paper reports the results from Gallup’s global analysis of the likelihood of first-generation migrants, second-generation migrants and the native-born to send financial help in the form of money or goods to others inside or outside their respective country of residence. The findings in this paper are based on more than 450,000 interviews conducted through Gallup’s World Poll in 157 countries in 2012, 2013 and 2014. The sample includes more than 26,000 first-generation migrants and more than 20,000 second-generation migrants. The large sample enables Gallup to analyze first-generation migrants by the duration of their stay in their adopted country and compare their remittance behaviors with second-generation migrants and the native-born.


Author(s):  
Asaad Abdullwahab AbdulKarim ◽  
Waleed Massaher Hamad ◽  
Salah Ibrahim Hamadi

Abstract     The Frankfurt School is characterized by its critical nature and it is the result of the Marxist socialist thought as it contributed to the development of the German thought in particular and the Western thought in general through important ideas put forward by a number of pioneers in the various generations of the school and most notably through the leading pioneer in the first generation, Marcuse, and the leading pioneer of the second  generation, Habermas, whose political ideas had an important impact on global thinking and later became the basis of the attic of many critical ideas. In spite of the belief of the school members in the idea of the criticism of power and community, each had his own ideas that distinguish him from the others.


2020 ◽  
Vol 25 (1) ◽  
pp. 23-32
Author(s):  
Gerd Laux

Für die Therapie schizophrener Erkrankungen sind seit fast 60 Jahren Antipsychotika/Neuroleptika aufgrund ihrer antipsychotischen Wirkung von zentraler Bedeutung. Die Einteilung kann unter verschiedenen Gesichtspunkten erfolgen (chemische Struktur, neuroleptische Potenz, Rezeptorprofil), heute werden üblicherweise unterschieden typische (traditionelle, klassische, konventionelle) Antipsychotika der ersten Generation ‒ »First Generation Antipsychotics« (FGA) ‒ und sog. atypische (»neuere«) Neuroleptika bzw. Antipsychotika der zweiten Generation ‒»Second Generation Antipsychotics« (SGA). Hierzu zählen Aripiprazol, Asenapin, Cariprazin, Clozapin, Olanzapin, Quetiapin, Risperidon, Sertindol und Ziprasidon. Hierbei handelt es sich um keine homogene Gruppe – sowohl neuropharmakologisch (Wirkmechanismus), als auch hinsichtlich klinischem Wirkprofil und dem Nebenwirkungsspektrum bestehen z. T. erhebliche Unterschiede. Neben der Akut-Medikation ist eine Langzeitmedikation bzw. Rezidivprophylaxe mit Antipsychotika für die Rehabilitation vieler schizophrener Patienten im Sinne eines »Stresspuffers« von grundlegender Bedeutung. In Placebo-kontrollierten Studien trat bei Patienten, die über ein Jahr behandelt wurden, bei etwa 30% unter Neuroleptika ein Rezidiv auf, unter Placebo bei mehr als 70%. Für die Langzeitbehandlung bietet sich der Einsatz von Depot-Neuroleptika an, neu entwickelt wurden Langzeit-Depot-Injektionen mit Intervallen von bis zu 3 Monaten. Grundsätzlich ist die niedrigstmögliche (wirksame) Dosis zu verwenden. Im Zentrum der Nebenwirkungen (UAW) standen lange Zeit extrapyramidal-motorische Bewegungsstörungen (EPMS), mit der Einführung von Clozapin und anderen atypischen Antipsychotika der zweiten Generation gewannen andere Nebenwirkungen an Bedeutung. Hierzu zählen Gewichtszunahme, Störungen metabolischer Parameter und ein erhöhtes Risiko für Mortalität und zerebrovaskuläre Ereignisse bei älteren Patienten mit Demenz. Entsprechende Kontrolluntersuchungen sind erforderlich, für Clozapin gibt es aufgrund seines Agranulozytose-Risikos Sonderbestimmungen. Immer sollte ein Gesamtbehandlungsplan orientiert an der neuen S3-Praxisleitlinie Schizophrenie der DGPPN aufgestellt werden, der psychologische und milieu-/sozial-therapeutische Maßnahmen einschließt. Standard ist heute auch eine sog. Psychoedukation, für Psychopharmaka liegen bewährte Patienten-Ratgeber vor.


Sign in / Sign up

Export Citation Format

Share Document