scholarly journals Manual Characterization of Sleep Spindle Index in Patients with Narcolepsy and Idiopathic Hypersomnia

2014 ◽  
Vol 2014 ◽  
pp. 1-4 ◽  
Author(s):  
Lourdes M. DelRosso ◽  
Andrew L. Chesson ◽  
Romy Hoque
Keyword(s):  
Standard Deviation ◽  
Count Data ◽  
Retrospective Review ◽  
Sleep Spindle ◽  
Index Data ◽  
Idiopathic Hypersomnia ◽  
Aasm Manual

This is a retrospective review of PSG data from 8 narcolepsy patients and 8 idiopathic hypersomnia (IH) patients, evaluating electrophysiologic differences between these two central hypersomnias. Spindles were identified according to the AASM Manual for the Scoring of Sleep and Associated Events; and counted per epoch in the first 50 epochs of N2 sleep and the last 50 epochs of N2 sleep in each patient’s PSG. Spindle count data (mean ± standard deviation) per 30 second-epoch (spindle index) in the 8 narcolepsy patients was as follows: 0.37 ± 0.73 for the first 50 epochs of N2; 0.65 ± 1.09 for the last 50 epochs of N2; and 0.51 ± 0.93 for all 100 epochs of N2. Spindle index data in the 8 IH patients was as follows: 2.31 ± 2.23 for the first 50 epochs of N2; 2.84 ± 2.43 for the last 50 epochs of N2; and 2.57 ± 2.35 for all 100 epochs of N2. Intergroup differences in spindle count in the first 50 N2 epochs, the last 50 N2 epochs, and all 100 epochs of scored N2 were significant (P<0.01) as were the intragroup differences between the first 50 N2 epochs and the last 50 N2 epochs.

Characterization of HRV by Poincare Plot Analysis among the Female Tea Garden Workers of Northern Hilly Regions of West Bengal

2012 ◽  
pp. 206-215
Author(s):  
Somsirsa Chatterjee ◽  
Ankur Ganguly ◽  
Saugat Bhattacharya
Keyword(s):  
Heart Rate ◽  
Heart Rate Variability ◽  
Standard Deviation ◽  
West Bengal ◽  
Mean Value ◽  
Short Term ◽  
Poincaré Plot ◽  
Plot Analysis ◽  
Tea Garden

Recent research on Heart Rate Variability (HRV) has proven that Poincare Plot is a powerful tool to mark Short Term and Long Term Heart Rate Variability. This study focuses a comprehensive characterization of HRV among the Tea Garden Workers of the Northern Hilly Regions of West Bengal. The characterization, as available from the data sets, projects the average values of SD1 characteristics, that is, Short Term HRV in females as 58.265ms and SD2 as 149.474. The SDRR shows a mean value of 87.298 with a standard deviation of 119.669 and the S Characterization as 16505.99 ms and Standard deviation of 45882.31 ms. The SDRR shows a mean value of 87.298 with a standard deviation of 119.669 and the S Characterization as 16505.99 ms and Standard deviation of 45882.31 ms. ApEn Characterization showed mean value of 0.961 and standard deviation of 0.274.

Characterization of HRV by Poincare Plot Analysis among the Female Tea Garden Workers of Northern Hilly Regions of West Bengal

2010 ◽  
Vol 5 (2) ◽  
pp. 49-59 ◽  
Author(s):  
Somsirsa Chatterjee ◽  
Ankur Ganguly ◽  
Saugat Bhattacharya
Keyword(s):  
Heart Rate ◽  
Heart Rate Variability ◽  
Standard Deviation ◽  
West Bengal ◽  
Mean Value ◽  
Data Sets ◽  
Short Term ◽  
Poincaré Plot ◽  
Tea Garden

Recent research on Heart Rate Variability (HRV) has proven that Poincare Plot is a powerful tool to mark Short Term and Long Term Heart Rate Variability. This study focuses a comprehensive characterization of HRV among the Tea Garden Workers of the Northern Hilly Regions of West Bengal. The characterization, as available from the data sets, projects the average values of SD1 characteristics, that is, Short Term HRV in females as 58.265ms and SD2 as 149.474. The SDRR shows a mean value of 87.298 with a standard deviation of 119.669 and the S Characterization as 16505.99 ms and Standard deviation of 45882.31 ms. The SDRR shows a mean value of 87.298 with a standard deviation of 119.669 and the S Characterization as 16505.99 ms and Standard deviation of 45882.31 ms. ApEn Characterization showed mean value of 0.961 and standard deviation of 0.274.

Characterization of dose-response for count data using a generalized MCP-Mod approach in an adaptive dose-ranging trial

2015 ◽  
Vol 14 (4) ◽  
pp. 359-367 ◽  
Author(s):  
Francois Mercier ◽  
Bjoern Bornkamp ◽  
David Ohlssen ◽  
Erik Wallstroem
Keyword(s):  
Dose Response ◽  
Count Data ◽  
Dose Ranging

scholarly journals Preparation and Characterization of a Pectin Membrane-Based Optical pH Sensor for Fish Freshness Monitoring

Biosensors ◽  
2019 ◽  
Vol 9 (2) ◽  
pp. 60 ◽  
Author(s):  
Uswatun Hasanah ◽  
Mita Setyowati ◽  
Rustam Efendi ◽  
Muslem Muslem ◽  
Nor Diyana Md Sani ◽  
...  
Keyword(s):  
Standard Deviation ◽  
Response Time ◽  
Relative Standard Deviation ◽  
Ph Sensor ◽  
Sensor Response ◽  
Relative Standard ◽  
Optical Ph Sensor

In a simple and instant procedure for detecting fish freshness, a hydrogel and hydrophilic pectin matrix membrane was used successfully as an optical pH sensor by immobilizing the chromoionophore ETH 5294 (CI), which is very selective and sensitive for the membrane. The Pe/CI optical pH sensor exhibited excellent linearity between pH 5 and pH 9, with a sensor response time of 5 min and reproducibility of 1.49% relative standard deviation (RSD). The sensor showed response stability for 15 days and a response reduction of 8.6%. The sensor’s capability was demonstrated by the detection of fish freshness for 17 days at 4 °C.

scholarly journals Detection of the Strains Induced in Murine Tibias by Ex Vivo Uniaxial Loading with Different Sensors

Sensors ◽  
2019 ◽  
Vol 19 (23) ◽  
pp. 5109
Author(s):  
Emanuele Rizzuto ◽  
Barbara Peruzzi ◽  
Mariagrazia Giudice ◽  
Enrica Urciuoli ◽  
Erika Pittella ◽  
...  
Keyword(s):  
Standard Deviation ◽  
Ex Vivo ◽  
Mean Value ◽  
Uniaxial Loading ◽  
Image Correlation ◽  
Strain Gauges ◽  
Experimental Conditions ◽  
The Mean

In this paper, the characterization of the main techniques and transducers employed to measure local and global strains induced by uniaxial loading of murine tibiae is presented. Micro strain gauges and digital image correlation (DIC) were tested to measure local strains, while a moving coil motor-based length transducer was employed to measure relative global shortening. Local strain is the crucial parameter to be measured when dealing with bone cell mechanotransduction, so we characterized these techniques in the experimental conditions known to activate cell mechanosensing in vivo. The experimental tests were performed using tibia samples excised from twenty-two C57BL/6 mice. To evaluate measurement repeatability we computed the standard deviation of ten repetitive compressions to the mean value. This value was lower than 3% for micro strain gauges, and in the range of 7%–10% for DIC and the length transducer. The coefficient of variation, i.e., the standard deviation to the mean value, was about 35% for strain gauges and the length transducer, and about 40% for DIC. These results provided a comprehensive characterization of three methodologies for local and global bone strain measurement, suggesting a possible field of application on the basis of their advantages and limitations.

scholarly journals Determination of Site-Specific (Deuterium/Hydrogen) Ratios in Vanillin by 2H-NuclearMagnetic Resonance Spectrometry: Collaborative Study

2007 ◽  
Vol 90 (1) ◽  
pp. 187-195 ◽  
Author(s):  
Eric Jamin ◽  
Frédérique Martin ◽  
Gilles G Martin ◽  
I Billault ◽  
A -I Blanch-Cortès ◽  
...  
Keyword(s):  
Standard Deviation ◽  
Collaborative Study ◽  
Official Method ◽  
Site Specific ◽  
Hydrogen Position ◽  
Nmr Spectrometry ◽  
Measuring Site ◽  
Commercial Sources

Abstract The results of collaborative study are reported for a method that determines the site-specific isotope ratios of deuterium/hydrogen (D/H)i in vanillin by deuterium-nuclear magnetic resonance (2H-NMR) spectrometry. This method allows characterization of all the main commercial sources of commercial vanillin and detection of undeclared mixtures. It is based on the fact that the amounts of deuterium at various positions in the vanillin molecule are significantly different from one source to another. Vanillin is dissolved in acetonitrile and analyzed with a high-field NMR spectrometer fitted with a deuterium probe and a fluorine lock. The proportions of isotopomers monodeuterated at each hydrogen position of the molecule are recorded, and the corresponding (D/H) ratios are determined by using a calibrated reference. Nine laboratories analyzed 5 materials supplied as blind duplicates (1 natural vanillin from vanilla beans, 2 synthetic vanillins from guaiacol, 1 semisynthetic vanillin from lignin, and a mixture of natural and synthetic vanillins). The precision of the method for measuring site-specific ratios was as follows: for (D/H)1 the within-laboratory standard deviation (sr) values ranged from 2.2 to 5.8 ppm, and the among-laboratories standard deviation (sR) values ranged from 3.6 to 5.1 ppm; for (D/H)3 the sr values ranged from 1.7 to 3.2 ppm, and the sR values ranged from 2.4 to 3.7 ppm; for (D/H)4 the sr values ranged from 2.3 to 6.2 ppm, and the sR values ranged from 2.4 to 6.4 ppm; for (D/H)5 the sr values ranged from 0.8 to 2.7 ppm, and the sR values ranged from 0.9 to 2.3 ppm. It was shown that these values allow a satisfactory discrimination between vanillin sources. Therefore, the Study Director recommends the method for adoption as a First Action Official Method by AOAC INTERNATIONAL.

scholarly journals The Effect Of Void Formation On The Reliability Of ED-XRF Measurements In Lead-Free Reflow Soldering

2015 ◽  
Vol 60 (2) ◽  
pp. 1445-1448 ◽  
Author(s):  
D. Koncz-Horváth ◽  
G. Gergely ◽  
Z. Gácsi
Keyword(s):  
Standard Deviation ◽  
Void Formation ◽  
Lead Free ◽  
Practical Implementation ◽  
Reflow Soldering ◽  
Eu Directive ◽  
Chemical Coating ◽  
Coating Methods ◽  
Heating Profiles

Abstract In lead-free reflow soldering, the presence of voids should be taken into account. For this reason, the effect of the applied heating profiles was examined via the characterization of voids in galvanic and immersion Sn coatings. According to EU Directive 2002/95/EC, the screening of Pb element of reflow soldering (i.e. of electrical and electronic equipment) is necessary; and the practical implementation of this measurement is largely affected by the characteristics of the solder (i.e. the presence of voids and the inhomogeneity of the solder). Comparing the results of the above two coating methods, it was found that by chemical coating more voids were formed and the detected lead content was higher than for galvanic Sn. The standard deviation of Ag and Cu concentrations was mainly influenced by the appearance of large compounds in the second case, while with chemical coating, no large compounds were formed due to the elevated number of voids.

Sign in / Sign up

Export Citation Format

Share Document