scholarly journals Stability Calculation Method of Slope Reinforced by Prestressed Anchor in Process of Excavation

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Zhong Li ◽  
Jia Wei ◽  
Jun Yang
Keyword(s):  
Slope Stability ◽  
Slip Surface ◽  
Calculation Model ◽  
Design Parameters ◽  
Search Model ◽  
Critical Slip Surface ◽  
Stability Calculation ◽  
Optimal Stability ◽  
Dynamic Search ◽  
Prestressed Anchor

This paper takes the effect of supporting structure and anchor on the slope stability of the excavation process into consideration; the stability calculation model is presented for the slope reinforced by prestressed anchor and grillage beam, and the dynamic search model of the critical slip surface also is put forward. The calculation model of the optimal stability solution of each anchor tension of the whole process is also given out, through which the real-time analysis and checking of slope stability in the process of excavation can be realized. The calculation examples indicate that the slope stability is changed with the dynamic change of the design parameters of anchor and grillage beam. So it is relatively more accurate and reasonable by using dynamic search model to determine the critical slip surface of the slope reinforced by prestressed anchor and grillage beam. Through the relationships of each anchor layout and the slope height of various stages of excavation, and the optimal stability solution of prestressed bolt tension design value in various excavation stages can be obtained. The arrangement of its prestressed anchor force reflects that the layout of the lower part of bolt and the calculation of slope reinforcement is in line with the actual. These indicate that the method is reasonable and practical.

Analysis of Earth-Rockfill Dam Slope Stability by Strength Reduction Method Based on Nonlinear Strength

2011 ◽  
Vol 243-249 ◽  
pp. 2271-2275
Author(s):  
Shu Yu ◽  
Li Hong Chen ◽  
Ze Ping Xu ◽  
Ning Chen
Keyword(s):  
Shear Strength ◽  
Slope Stability ◽  
Reduction Method ◽  
Slip Surface ◽  
Strength Reduction ◽  
Strength Parameter ◽  
Strength Reduction Method ◽  
Critical Slip Surface ◽  
Rockfill Dam ◽  
The Earth

In the design process of the earth-rock dam, the slope stability problem was always focused on. The shear strength of rockfill in the earth-rock dam had strong nonlinear characteristics. The characteristic directly affected the factor of safety (FOS) of stability of dam slope and the determination of the critical slip surface. The shear strength parameter of rockfill was related to the minimum principal stress σ3 closely. And the value of σ3 had close relationship with the deformation characteristics of filling material and the process of dam filling etc. Strength reduction method has been widely used in solving the FOS of slope stability, and this method has the advantage on the searching of the critical slip surface. Combining the deformation and stress analysis of earth-rockfill dam filling process and the strength reduction method, this paper proposes a comprehensive method of dam slope stability analysis.

A Comparative Study on Locating Critical Slip Surface in 2D and 3D Limit Equilibrium Stability Analysis of Slopes

2012 ◽  
Vol 446-449 ◽  
pp. 1905-1913
Author(s):  
Mo Wen Xie ◽  
Zeng Fu Wang ◽  
Xiang Yu Liu ◽  
Ning Jia
Keyword(s):  
Stability Analysis ◽  
Slope Stability ◽  
Safety Factor ◽  
Slip Surface ◽  
Limit Equilibrium ◽  
Three Dimensional ◽  
Slope Stability Analysis ◽  
Equilibrium Stability ◽  
Critical Slip Surface ◽  
Minimum Safety Factor

The Various methods of optimization or random search have been developed for locating the critical slip surface of a slope and the related minimum safety factor in the limit equilibrium stability analysis of slope. But all these methods are based on a two-dimensional (2D) method and no one had been adapted for a search of the three-dimensional (3D) critical slip surface. In this paper, a new Monte Carlo random simulating method has been proposed to identify the 3D critical slip surface, in which assuming the initial slip to be the lower part of an ellipsoid, the 3D critical slip surface in the 3D slope stability analysis is located by minimizing the 3D safety factor of limit equilibrium approach. Based on the column-based three-dimensional limit equilibrium slope stability analysis models, new Geographic Information Systems (GIS) grid-based 3D deterministic limit equilibrium models are developed to calculate the 3D safety factors. Several practical examples, of obtained minimum safety factor and its critical slip surface by a 2D optimization or random technique, are extended to 3D slope problems to locate the 3D critical slip surface and to compare with the 2D results. The results shows that, comparing with the 2D results, the resulting 3D critical slip surface has no apparent difference only from a cross section, but the associated 3D safety factor is definitely higher.

The application of dynamic programming to slope stability analysis

2003 ◽  
Vol 40 (4) ◽  
pp. 830-847 ◽  
Author(s):  
Ha T.V Pham ◽  
Delwyn G Fredlund
Keyword(s):  
Dynamic Programming ◽  
Slope Stability ◽  
Stress Analysis ◽  
Slip Surface ◽  
Limit Equilibrium ◽  
Programming Method ◽  
Dynamic Programming Method ◽  
Critical Slip Surface ◽  
Limit Equilibrium Methods ◽  
Conventional Limit

The applicability of the dynamic programming method to two-dimensional slope stability analyses is studied. The critical slip surface is defined as the slip surface that yields the minimum value of an optimal function. The only assumption regarding the shape of the critical slip surface is that the surface is an assemblage of linear segments. Stresses acting along the critical slip surface are computed using a finite element stress analysis. Assumptions associated with limit equilibrium methods of slices related to the shape of the critical slip surface and the relationship between interslice forces are no longer required. A computer program named DYNPROG was developed based on the proposed analytical procedure, and numerous example problems have been analyzed. Results obtained when using DYNPROG were compared with those obtained when using several well-known limit equilibrium methods. The comparisons demonstrate that the dynamic programming method provides a superior solution when compared with conventional limit equilibrium methods. Analyses conducted also show that factors of safety computed when using the dynamic programming method are generally slightly lower than those computed using conventional limit equilibrium methods of slices; however, as Poisson's ratio approaches 0.5, the computed factors of safety from the dynamic programming method and the limit equilibrium method appear to become similar.Key words: dynamic programming, slope stability, stress analysis, optimization theory, limit equilibrium methods of slices.

Sign in / Sign up

Export Citation Format

Share Document