scholarly journals Enhancement of Lignin Biopolymer Isolation from Hybrid Poplar by Organosolv Pretreatments

2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
Miao Wu ◽  
Jinhui Pang ◽  
Xueming Zhang ◽  
Runcang Sun
Keyword(s):  
Lignocellulosic Biomass ◽  
High Performance ◽  
Aqueous Ethanol ◽  
Hybrid Poplar ◽  
Renewable Resource ◽  
2D Nmr ◽  
Anion Exchange Chromatography ◽  
Exchange Chromatography ◽  
Spectra Analysis ◽  
Lignin Fraction

Lignocellulosic biomass is an abundant renewable resource that has the potential to displace petroleum in the production of biomaterials and biofuels. In the present study, the fractionation of different lignin biopolymers from hybrid poplar based on organosolv pretreatments using 80% aqueous methanol, ethanol, 1-propanol, and 1-butanol at 220°C for 30 min was investigated. The isolated lignin fractions were characterized by Fourier transform infrared spectroscopy (FT-IR), high-performance anion exchange chromatography (HPAEC), 2D nuclear magnetic resonance (2D NMR), and thermogravimetric analysis (TGA). The results showed that the lignin fraction obtained with aqueous ethanol (EOL) possessed the highest yield and the strongest thermal stability compared with other lignin fractions. In addition, other lignin fractions were almost absent of neutral sugars (1.16–1.46%) though lignin preparation extracted with 1-butanol (BOL) was incongruent (7.53%). 2D HSQC spectra analysis revealed that the four lignin fractions mainly consisted ofβ-O-4′ linkages combined with small amounts ofβ-β′andβ-5′ linkages. Furthermore, substitution ofCαinβ-O-4′ substructures had occurred due to the effects of dissolvent during the autocatalyzed alcohol organosolv pretreatments. Therefore, aqueous ethanol was found to be the most promising alcoholic organic solvent compared with other alcohols to be used in noncatalyzed processes for the pretreatment of lignocellulosic biomass in biorefinery.

scholarly journals Enzymatic Synthesis and Characterization of Different Families of Chitooligosaccharides and Their Bioactive Properties

2021 ◽  
Vol 11 (7) ◽  
pp. 3212
Author(s):  
Noa Miguez ◽  
Peter Kidibule ◽  
Paloma Santos-Moriano ◽  
Antonio O. Ballesteros ◽  
Maria Fernandez-Lobato ◽  
...  
Keyword(s):  
High Performance ◽  
Chemical Characterization ◽  
Amperometric Detection ◽  
Anion Exchange Chromatography ◽  
Exchange Chromatography ◽  
Enzymatic Production ◽  
Bioactive Properties ◽  
Substrate Properties ◽  
Chitin Hydrolysis

Chitooligosaccharides (COS) are homo- or hetero-oligomers of D-glucosamine (GlcN) and N-acetyl-D-glucosamine (GlcNAc) that can be obtained by chitosan or chitin hydrolysis. Their enzymatic production is preferred over other methodologies (physical, chemical, etc.) due to the mild conditions required, the fewer amounts of waste and its efficiency to control product composition. By properly selecting the enzyme (chitinase, chitosanase or nonspecific enzymes) and the substrate properties (degree of deacetylation, molecular weight, etc.), it is possible to direct the synthesis towards any of the three COS types: fully acetylated (faCOS), partially acetylated (paCOS) and fully deacetylated (fdCOS). In this article, we review the main strategies to steer the COS production towards a specific group. The chemical characterization of COS by advanced techniques, e.g., high-performance anion-exchange chromatography with pulsed amperometric detection (HPAEC-PAD) and MALDI-TOF mass spectrometry, is critical for structure–function studies. The scaling of processes to synthesize specific COS mixtures is difficult due to the low solubility of chitin/chitosan, the heterogeneity of the reaction mixtures, and high amounts of salts. Enzyme immobilization can help to minimize such hurdles. The main bioactive properties of COS are herein reviewed. Finally, the anti-inflammatory activity of three COS mixtures was assayed in murine macrophages after stimulation with lipopolysaccharides.

Sign in / Sign up

Export Citation Format

Share Document