scholarly journals Fabrication andIn VitroEvaluation of Nanosized Hydroxyapatite/Chitosan-Based Tissue Engineering Scaffolds

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Tao Sun ◽  
Tareef Hayat Khan ◽  
Naznin Sultana
Keyword(s):  
Tissue Engineering ◽  
Composite Scaffold ◽  
Three Dimensional ◽  
Biological Evaluation ◽  
Mouse Fibroblast ◽  
Tissue Engineering Scaffolds ◽  
Composite Scaffolds ◽  
Thermally Induced ◽  
Chitosan Composite

Composite scaffolds based on biodegradable natural polymer and osteoconductive hydroxyapatite (HA) nanoparticles can be promising for a variety of tissue engineering (TE) applications. This study addressed the fabrication of three-dimensional (3D) porous composite scaffolds composed of HA and chitosan fabricated via thermally induced phase separation and freeze-drying technique. The scaffolds produced were subsequently characterized in terms of microstructure, porosity, and mechanical property.In vitrodegradation andin vitrobiological evaluation were also investigated. The scaffolds were highly porous and had interconnected pore structures. The pore sizes ranged from several microns to a few hundred microns. The incorporated HA nanoparticles were well mixed and physically coexisted with chitosan in composite scaffold structures. The addition of 10% (w/w) HA nanoparticles to chitosan enhanced the compressive mechanical properties of composite scaffold compared to pure chitosan scaffold.In vitrodegradation results in phosphate buffered saline (PBS) showed slower uptake properties of composite scaffolds. Moreover, the scaffolds showed positive response to mouse fibroblast L929 cells attachment. Overall, the findings suggest that HA/chitosan composite scaffolds could be suitable for TE applications.

Preparation and Characterization of Biodegradable β-TCP-Based Composite Microspheres as Bone Tissue Engineering Scaffolds

2007 ◽  
Vol 336-338 ◽  
pp. 1646-1649 ◽  
Author(s):  
Qing Feng Zan ◽  
Chen Wang ◽  
Li Min Dong ◽  
Rui Liu ◽  
Jie Mo Tian
Keyword(s):  
Tissue Engineering ◽  
Bone Repair ◽  
Three Dimensional ◽  
Tissue Engineering Scaffolds ◽  
Composite Microspheres ◽  
Globular Particle ◽  
Suspended Cultures ◽  
Chitosan Composite

Since a small globular particle was first used as support for three-dimensional (3D) growth of anchorage-dependent cells in suspended cultures, a variety of microspheres as tissue engineering scaffolds have been developed. In this paper, β-TCP and chitosan were selected as the components of microspheres due to their biodegradability and osteogenic properties. The biodegradable β-TCP/chitosan composite microspheres were prepared by a solid-in-water-in-oil (s/w/o) emulsion cross-linking method in this paper. The size distribution, surface morphology, and microstructure of the microspheres were evaluated. Scanning electron microscopy revealed that the size of the microspheres with good spherical morphology was distributed in the range of 50~200μm. In vitro immersion experiments were carried out to evaluate the degradability of the microspheres, and the results demonstrated that the chitosan/β-TCP composite microspheres were potential materials as tissue engineering scaffolds for bone repair.

scholarly journals Three-dimensionally printed polycaprolactone/multicomponent bioactive glass scaffolds for potential application in bone tissue engineering

2020 ◽  
Vol 6 (1) ◽  
pp. 57-69
Author(s):  
Amirhosein Fathi ◽  
Farzad Kermani ◽  
Aliasghar Behnamghader ◽  
Sara Banijamali ◽  
Masoud Mozafari ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
3D Printing ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Three Dimensional ◽  
Layer By Layer ◽  
Composite Scaffolds ◽  
3D Printed ◽  
Co Doped

AbstractOver the last years, three-dimensional (3D) printing has been successfully applied to produce suitable substitutes for treating bone defects. In this work, 3D printed composite scaffolds of polycaprolactone (PCL) and strontium (Sr)- and cobalt (Co)-doped multi-component melt-derived bioactive glasses (BGs) were prepared for bone tissue engineering strategies. For this purpose, 30% of as-prepared BG particles (size <38 μm) were incorporated into PCL, and then the obtained composite mix was introduced into a 3D printing machine to fabricate layer-by-layer porous structures with the size of 12 × 12 × 2 mm3.The scaffolds were fully characterized through a series of physico-chemical and biological assays. Adding the BGs to PCL led to an improvement in the compressive strength of the fabricated scaffolds and increased their hydrophilicity. Furthermore, the PCL/BG scaffolds showed apatite-forming ability (i.e., bioactivity behavior) after being immersed in simulated body fluid (SBF). The in vitro cellular examinations revealed the cytocompatibility of the scaffolds and confirmed them as suitable substrates for the adhesion and proliferation of MG-63 osteosarcoma cells. In conclusion, 3D printed composite scaffolds made of PCL and Sr- and Co-doped BGs might be potentially-beneficial bone replacements, and the achieved results motivate further research on these materials.

Preparation, Characterization and In Vitro Release Kinetics of Vancomycin Carried β-TCP/Chitosan Composite Microspheres Used as Bone Tissue Engineering Scaffolds

2012 ◽  
Vol 512-515 ◽  
pp. 1821-1825
Author(s):  
Lin Zhang ◽  
Xue Min Cui ◽  
Qing Feng Zan ◽  
Li Min Dong ◽  
Chen Wang ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Cross Linking ◽  
Tissue Engineering Scaffolds ◽  
Composite Microspheres ◽  
Chitosan Composite ◽  
Vitro Release

A novel microsphere scaffolds composed of chitosan and β-TCP containing vancomycin was designed and prepared. The β-TCP/chitosan composite microspheres were prepared by solid-in-water-in-oil (s/w/o) emulsion cross-linking method with or without pre-cross-linking process. The mode of vancomycin maintaining in the β-TCP/chitosan composite microspheres was detected by Fourier transform infrared spectroscopy (FTIR). The in vitro release curve of vancomycin in simulated body fluid (SBF) was estimated. The results revealed that the pre-cross-linking prepared microspheres possessed higher loading efficiency (LE) and encapsulation efficiency (EE) especially decreasing the previous burst mass of vancomycin in incipient release. These composite microspheres got excellent sphere and well surface roughness in morphology. Vancomycin was encapsulated in composite microspheres through absorption and cross-linking. While in-vitro release curves illustrated that vancomycin release depond on diffusing firstly and then on the degradation ratio later. The microspheres loading with vancomycin would be to restore bone defect, meanwhile to inhibit bacterium proliferation. These bioactive, degradable composite microspheres have potential applications in 3D tissue engineering of bone and other tissues in vitro and in vivo.

Mineralized Nanofibers for Bone Tissue Engineering

2018 ◽  
pp. 461-475 ◽  
Author(s):  
Ozan Karaman
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Regeneration ◽  
Bone Tissue ◽  
Three Dimensional ◽  
Bone Grafts ◽  
Tissue Engineering Scaffolds ◽  
Promising Alternative ◽  
Biomimetic Scaffolds

The limitation of orthopedic fractures and large bone defects treatments has brought the focus on fabricating bone grafts that could enhance ostegenesis and vascularization in-vitro. Developing biomimetic materials such as mineralized nanofibers that can provide three-dimensional templates of the natural bone extracellular-matrix is one of the most promising alternative for bone regeneration. Understanding the interactions between the structure of the scaffolds and cells and therefore the control cellular pathways are critical for developing functional bone grafts. In order to enhance bone regeneration, the engineered scaffold needs to mimic the characteristics of composite bone ECM. This chapter reviews the fabrication of and fabrication techniques for fabricating biomimetic bone tissue engineering scaffolds. In addition, the chapter covers design criteria for developing the scaffolds and examples of enhanced osteogenic differentiation outcomes by fabricating biomimetic scaffolds.

In Vitro Degradation and Protein Adsorption Characteristics of PHBV/PLLA Blends and PHBV/PLLA-Based Tissue Engineering Scaffolds

2008 ◽  
Vol 47-50 ◽  
pp. 1399-1402 ◽  
Author(s):  
Naznin Sultana ◽  
Min Wang
Keyword(s):  
Tissue Engineering ◽  
Polymer Blends ◽  
Water Uptake ◽  
Degradation Rate ◽  
Porous Films ◽  
Tissue Engineering Scaffolds ◽  
Composite Scaffolds ◽  
Weight Losses ◽  
Model Protein

Poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) was used to make composite scaffolds for bone tissue engineering in our previous studies. To control the degradation rate and process of composite scaffolds, PHBV was blended with poly(L-lactic acid) (PLLA), which has a much higher degradation rate than PHBV, and PHBV/PLLA blends were used as polymer matrices for composite scaffolds. Composite scaffolds based on these blends and containing nano-sized hydroxyapatite (nHA) were fabricated using an emulsion freezing / freeze-drying technique. Non-porous films of PHBV/PLLA blends were prepared using the solvent casting method. In vitro degradation tests of non-porous PHBV/PLLA blends and porous composite scaffolds were conducted by immersing samples in phosphate buffered saline (PBS) for various periods of time. It was found that the composition of polymer blends affected water uptake of films and scaffolds. For PHBV/PLLA-based scaffolds, the incorporated nHA particles also significantly increased water uptake within the initial immersion time. Both PHBV/PLLA blends and composite scaffolds underwent rapid weight losses within the first few weeks. The degradation of composite scaffolds arose from the dissolution of nHA particles and degradation of the PLLA component of polymer blends. Composite scaffolds exhibited enhanced adsorption of bovine serum albumin (BSA), a model protein, in the current study.

scholarly journals A Nanofiber Mat With Dual Bioactive Components and a Biomimetic Matrix Structure for Improving Osteogenesis Effect

2021 ◽  
Vol 9 ◽  
Author(s):  
Yadi Han ◽  
Xiaofeng Shen ◽  
Sihao Chen ◽  
Xiuhui Wang ◽  
Juan Du ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Lactic Acid ◽  
Bone Repair ◽  
Three Dimensional ◽  
Dimensional Structure ◽  
Bioactive Components ◽  
Tissue Engineering Scaffolds ◽  
Cell Growth And Migration ◽  
Nanofiber Mats

The challenge of effectively regenerating bone tissue through tissue engineering technology is that most tissue engineering scaffolds cannot imitate the three-dimensional structure and function of the natural extracellular matrix. Herein, we have prepared the poly(L-lactic acid)–based dual bioactive component reinforced nanofiber mats which were named as poly(L-lactic acid)/bovine serum albumin/nanohydroxyapatite (PLLA/BSA/nHAp) with dual bioactive components by combining homogeneous blending and electrospinning technology. The results showed that these nanofiber mats had sufficient mechanical properties and a porous structure suitable for cell growth and migration. Furthermore, the results of cell experiments in vitro showed that PLLA/BSA/nHAp composite nanofiber mat could preferably stimulate the proliferation of mouse osteoblastic cells (MC3T3 cells) compared with pure PLLA nanofiber mats. Based on these results, the scaffolds developed in this study are considered to have a great potential to be adhibited as bone repair materials.

Thermal Processing of Tissue Engineering Scaffolds

2010 ◽  
Vol 133 (3) ◽  
Author(s):  
Alisa Morss Clyne
Keyword(s):  
Tissue Engineering ◽  
Thermal Processing ◽  
Three Dimensional ◽  
Processing Parameters ◽  
High Pressure Processing ◽  
Porous Scaffolds ◽  
Tissue Engineering Scaffolds ◽  
Thermally Induced ◽  
Advantages And Disadvantages ◽  
Particulate Leaching

Tissue engineering requires complex three-dimensional scaffolds that mimic natural extracellular matrix function. A wide variety of techniques have been developed to create both fibrous and porous scaffolds out of polymers, ceramics, metals, and composite materials. Existing techniques include fiber bonding, electrospinning, emulsion freeze drying, solvent casting/particulate leaching, gas foaming/particulate leaching, high pressure processing, and thermally induced phase separation. Critical scaffold properties, including pore size, porosity, pore interconnectivity, and mechanical integrity, are determined by thermal processing parameters in many of these techniques. In this review, each tissue engineering scaffold preparation method is discussed, including recent advancements as well as advantages and disadvantages of the technique, with a particular emphasis placed on thermal parameters. Improvements on these existing techniques, as well as new thermal processing methods for tissue engineering scaffolds, will be needed to provide tissue engineers with finer control over tissue and organ development.

Physico-Chemical and In Vitro Cytotoxic Properties of Alginate/Soy Protein Isolated Scaffolds for Tissue Engineering

2017 ◽  
Vol 757 ◽  
pp. 46-51 ◽  
Author(s):  
Patcharakamon Nooeaid ◽  
Piyachat Chuysinuan ◽  
Supanna Techasakul ◽  
Kriengsak Lirdprapamongkol ◽  
Jisnuson Svasti
Keyword(s):  
Tissue Engineering ◽  
Soy Protein ◽  
Chemical Structure ◽  
Freeze Drying ◽  
Human Fibroblasts ◽  
Three Dimensional ◽  
Tissue Engineering Scaffolds ◽  
Physico Chemical ◽  
Chemical Attributes

Three-dimensional (3D) porous alginate/soy protein isolated (Alg/SPI) tissue engineering scaffolds were achieved by freeze-drying. The physico-chemical attributes of the scaffolds including morphology, chemical structure, mechanical properties and in vitro cytotoxicity were investigated for different SPI blends. Results indicated that increasing SPI content to 40 wt% in the blends resulted in the partial existence of closed pores and reduced pore size. The mechanical values of the scaffolds under compression also reduced with increasing SPI in the blends. The addition of SPI did not significantly enhance the cell viability of the scaffolds investigated for in vitro culture with human fibroblasts, which remained in the high (90 – 100%) range. Results demonstrated that Alg/SPI scaffolds have potential for use as tissue engineering scaffolds.

Biodegradable and Bioactive Polymer/Bioglass® Composite Foams for Tissue Engineering Scaffolds

2005 ◽  
Vol 494 ◽  
pp. 499-506 ◽  
Author(s):  
Aldo Roberto Boccaccini ◽  
J.J. Blaker ◽  
V. Maquet ◽  
R. Jerome ◽  
S. Blacher ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Chemical Reactivity ◽  
Poly Lactic Acid ◽  
Tissue Engineering Scaffolds ◽  
High Chemical ◽  
Thermally Induced ◽  
Composite Foams ◽  
45S5 Bioglass ◽  
Hydroxyapatite Crystals

Porous bioresorbable and bioactive composite materials designed for applications as scaffolds in tissue engineering are discussed. The systems fabricated by thermally induced phase separation method and based on poly(D,L-lactide) (PDLLA) or poly(lactic acid-co-glycolic acid) (PLGA) with additions of bioactive glass particles (45S5 Bioglass®) are described in detail. The scaffolds exhibit a well-defined, oriented and interconnected porosity. The porosity structure of foams with and without Bioglass® was characterised by scanning electron microscopy. The in vitro bioactivity and degradability of the composite foams were investigated in contact with phosphate buffer saline (PBS) and simulated body fluid (SBF). High chemical reactivity of scaffolds in SBF, which leads to the prompt formation of bonelike hydroxyapatite crystals on the material surfaces, indicates an enhanced bioactive character of the composites and therefore their potential for use as bone tissue engineering scaffolds.

Preparation of PLLA/HAP/β-TCP Composite Scaffold for Bone Tissue Engineering

2014 ◽  
Vol 513-517 ◽  
pp. 143-146 ◽  
Author(s):  
Xue Jun Wang ◽  
Tao Lou ◽  
Jing Yang ◽  
Zhen Yang ◽  
Kun Peng He
Keyword(s):  
Mechanical Properties ◽  
Tissue Engineering ◽  
Lactic Acid ◽  
Phase Separation ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Composite Scaffold ◽  
Thermally Induced Phase Separation ◽  
Composite Scaffolds ◽  
Thermally Induced

In this study, a nanofibrous poly (L-lactic acid) (PLLA) scaffold reinforced by Hydroxyapatite (HAP) and β-tricalcium phosphate (β-TCP) was fabricated using the thermally induced phase separation method. The composite scaffold morphology showed a nanofibrous PLLA matrix and evenly distributed β-TCP/HAP particles. The composite scaffold had interconnective micropores and the pore size ranged 2-10 μm. Introducing β-TCP/HAP particles into PLLA matrix significantly improved the mechanical properties of the composite scaffold. In summary, the new composite scaffolds show a great deal promise for use in bone tissue engineering.

Sign in / Sign up

Export Citation Format

Share Document