scholarly journals Low-Profile Dual-Wideband MIMO Antenna with Low ECC for LTE and Wi-Fi Applications

2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
Gye-Taek Jeong ◽  
Sunho Choi ◽  
Kyoung-hak Lee ◽  
Woo-Su Kim
Keyword(s):  
Multiple Input Multiple Output ◽  
Surface Current ◽  
Mobile Terminal ◽  
Radiation Patterns ◽  
Mimo Antenna ◽  
Isolation Techniques ◽  
Low Profile ◽  
Multiple Input ◽  
Wireless Broadband ◽  
Input Multiple Output

This paper presents a low-profile dual-wideband multiple input multiple output (MIMO) antenna with low envelop correlation coefficient (ECC) for long-term evolution (LTE) and wireless fidelity (Wi-Fi) applications. The antenna covers LTE band 7 and Wi-Fi as well as wireless broadband (Wibro) and Worldwide Interoperability for Microwave Access (WiMax) (except for the 3.5-GHz band). To aid with integration of a practical mobile terminal, the MIMO antenna elements are placed at appropriate locations by analyzing the surface current distribution and without using any additional isolation techniques. The measured bandwidths with reflection coefficients of <−10 dB are 36.8% in the range 2.02–2.93 GHz and 23.4% in the range 5.10–6.45 GHz. Isolation is satisfied to be >20 dB in the operating frequency ranges of both LTE band 7 and Wi-Fi. Additionally, the calculated ECC is in the range0.005<ρ<0.025, which is considerably lower than theρ<0.5required for MIMO applications. The measured radiation patterns are appropriate for mobile terminals, and omnidirectional radiation patterns are obtained.

scholarly journals Mutual Coupling Reduction of E-Shaped MIMO Antenna with Matrix of C-Shaped Resonators

2018 ◽  
Vol 2018 ◽  
pp. 1-13 ◽  
Author(s):  
Raghad Ghalib Saadallah Alsultan ◽  
Gölge Ögücü Yetkin
Keyword(s):  
Mutual Coupling ◽  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Surface Current ◽  
Antenna System ◽  
Total Efficiency ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Parallel Arrangement ◽  
Input Multiple Output

E-shaped multiple-input-multiple-output (MIMO) microstrip antenna systems operating in WLAN and WiMAX bands (between 5 and 7.5 GHz) are proposed with enhanced isolation features. The systems are comprised of two antennas that are placed parallel and orthogonal to each other, respectively. According to the simulation results, the operating frequency of the MIMO antenna system is 6.3 GHz, and mutual coupling is below −18 dB in a parallel arrangement, whereas they are 6.4 GHz and −25 dB, respectively, in the orthogonal arrangement. The 2 × 3 matrix of C-shaped resonator (CSR) is proposed and placed between the antenna elements over the substrate, to reduce the mutual coupling and enhance the isolation between the antennas. More than 30 dB isolation between the array elements is achieved at the resonant frequency for both of the configurations. The essential parameters of the MIMO array such as mutual coupling, surface current distribution, envelop correlation coefficient (ECC), diversity gain (DG), and the total efficiency have been simulated to verify the reliability and the validity of the MIMO system in both parallel and orthogonal configurations. The experimental results are also provided and compared for the mutual coupling with simulated results. An adequate match between the measured and simulated results is achieved.

Dual circular slot ring triple-band MIMO antenna for 5G applications

Frequenz ◽  
2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Anand Kumar ◽  
Santosh Kumar Mahto ◽  
Rashmi Sinha ◽  
Arvind Choubey
Keyword(s):  
Mutual Coupling ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Mobile Terminal ◽  
High Gain ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Smart Wearable ◽  
Triple Band

AbstractA Triple-band Multiple-Input-Multiple-Output (MIMO) antenna for 5G mobile terminal applications is proposed in this paper. The design comprises four-port/two resonators, each having two concentric circular slot ring radiators etched on a ground plane of size 50 mm ${\times}$ 50 mm. The antenna is fed by perpendicularly arranged 50 Ω microstrip line feeds on the top layer. Decoupling techniques were used to suppress mutual coupling between the two resonators. The perpendicular arrangement of the feed lines and port reduces mutual coupling between the two ports and increases isolation. The antenna operates in multiple bands: 3.35–3.69 GHz, 24–28 GHz, and 37–40 GHz frequency range with central frequencies at 3.5 GHz, 26 GHz, and 38 GHz, respectively allocated for 5G. The antenna provides a gain of 2.7–7.8 dB and a radiation efficiency of 0.49–0.85 in the operating bands. Diversity performance is studied in terms of the Envelop Correlation Coefficient (ECC), Diversity Gain (DG), and Total Active Reflection Coefficient (TARC) were found to be less than 0.01, greater than 9.99 dB, and less than −10 dB respectively. The proposed antenna offers good S-parameters, voltage standing wave ratio (VSWR), TARC, radiation pattern, high gain, and low ECC. The antenna was fabricated and tested. The measured results and simulated results are in good agreement. It possesses sufficient potential for 5G mobile terminal and smart wearable applications.

Multiband Printed Slot Meander Patch Antenna for MIMO Implementation in 4G Handheld Devices

2013 ◽  
Vol 64 (3) ◽  
Author(s):  
Nassrin Ibrahim Mohamed ◽  
Tharek Abd. Rahman ◽  
Mursyidul Idzam Sabran
Keyword(s):  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Handheld Devices ◽  
Portable Devices ◽  
Patch Antennas ◽  
Mimo Antenna ◽  
Low Profile ◽  
Proposed Model ◽  
Multiple Input ◽  
Input Multiple Output

This paper presents a Low-profile slot meander patch antennas. The antenna is a multiple communication bands for handheld devices and implements multiple-input–multiple-output (MIMO) technique. The proposed model covers LTE band-11 1.5 GHz Lower (1427.9 - 1452.9, 1475.9 - 1500.9), LTE band-2 PCS 1900 (1930 -1990, 1850 -1910), LTE band-7 2.6 GHz (2620-2690, 2500- 2570), and LTE band-22 3.5 GHz (3510-3590, 3410-3490) with dB matching criterion (VSWR 3:1). An isolation less than -15 dB has been obtained between two typical slot meander patch antennas. The isolation is achieved as a result of using CPW feeding mechanism and inserted CLL network isolator. This dual-feed (2-elements) planar antenna is fabricated and measured. The result of this small size structured MIMO antenna system shows a good radiation characteristics and small mutual coupling which is promising for MIMO applications in compact portable devices.

scholarly journals Low-Profile and Closely Spaced Four-Element MIMO Antenna for Wireless Body Area Networks

Electronics ◽  
2020 ◽  
Vol 9 (2) ◽  
pp. 258 ◽  
Author(s):  
Issa Elfergani ◽  
Amjad Iqbal ◽  
Chemseddine Zebiri ◽  
Abdul Basir ◽  
Jonathan Rodriguez ◽  
...  
Keyword(s):  
Impedance Matching ◽  
Multiple Input Multiple Output ◽  
Mimo Antenna ◽  
Ism Band ◽  
Average Channel Capacity ◽  
Capacity Loss ◽  
Low Profile ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Strong Candidate

A compact four-element multiple-input multiple output (MIMO) antenna is proposed for medical applications operating at a 2.4 GHz ISM band. The proposed MIMO design occupies an overall volume of 26 mm × 26 mm × 0.8 mm. This antenna exhibits a good impedance matching at the operating frequency of the ISM band, whose performance attributes include: isolation around 25 dB, envelope correlation coefficient (ECC) less than 0.02, average channel capacity loss (CCL) less than 0.3 bits/s/Hz and diversity gain (DG) of around 10 dB. The average peak realized gain of the four-element MIMO antenna is 2.4 dBi with more than 77 % radiation efficiency at the frequency of interest (ISM 2.4 GHz). The compact volume and adequate bandwidth, as well as the good achieved gain, make this antenna a strong candidate for bio-medical wearable applications.

Design of an interlocked four-port MIMO antenna for UWB automotive communications

2021 ◽  
pp. 1-8
Author(s):  
M. Saravanan ◽  
R. Kalidoss ◽  
B. Partibane ◽  
K. S. Vishvaksenan
Keyword(s):  
Multiple Input Multiple Output ◽  
Performance Estimation ◽  
Ultra Wideband ◽  
Antenna Element ◽  
Frequency Range ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Operating Bandwidth ◽  
Peak Gain

Abstract The design, analysis, fabrication, and testing of a four-port multiple-input multiple-output (MIMO) antenna is reported in this paper for automotive communications. The MIMO antenna is constructed using the basic antenna element exploiting a slot geometry. Two such antennas are developed on the same microwave laminate to develop a two-port MIMO antenna. Two such microwave laminates are interlocked to create the four-port MIMO scheme. The most distinct feature of the proposed architecture is that the inter-port isolation is well-taken care without the need for an external decoupling unit. The four-port MIMO antenna has an overall volume of 32 × 15 × 32 mm3. The prototype MIMO antenna is fabricated and the measurements are carried out to validate the simulation results. The antenna offers ultra-wideband (UWB) characteristics covering the frequency range of 2.8–9.5 GHz. The average boresight gain of the antenna ranges from 3.2 to 5.41 dBi with the peak gain at 8 GHz. The simulated efficiency of the antenna is greater than 73% within the operating bandwidth. The MIMO parameters such as envelope correlation coefficient, diversity gain, and mean effective gain are evaluated and presented. The appropriateness of the proposed antenna for deployment in the shark fin housing of the present-day automobiles is verified using on-car performance estimation.

scholarly journals Mutual Coupling Reduction of DRA for MIMO Applications

2019 ◽  
Vol 8 (1) ◽  
pp. 75-81
Author(s):  
N. Al Shalaby ◽  
S. G. El-Sherbiny
Keyword(s):  
Mutual Coupling ◽  
Dielectric Material ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Parasitic Element ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Element Method

In this paper, A multiple input Multiple Output (MIMO) antenna using two Square Dielectric Resonators (SDRs) is introduced. The mutual coupling between the two SDRAs is reduced using two different methods; the first method is based on splitting a spiral slot in the ground plane, then filling the slot with dielectric material, "E.=2.2". The second method is based on inserting a copper parasitic element, having the same shape of the splitted Spiral, between the two SDRAs.  The effect of replacing the copper parasitic element with Carbon nanotubes (CNTs) parasitic element "SOC12 doped long-MWCNT BP" is also studied. The antenna system is designed to operate at 6 GHz. The analysis and simulations are carried out using finite element method (FEM). The defected ground plane method gives a maximum isolation of l8dB at element spacing of 30mm (0.6λo), whereas the parasitic element method gives a maximum isolation of 42.5dB at the same element spacing.

scholarly journals DESIGN AND ANALYSIS OF COMPACT METAMATERIAL MIMO ANTENNA FOR WLAN APPLICATIONS

2019 ◽  
Vol 57 (2) ◽  
pp. 223
Author(s):  
Hoa Nguyen Thi Quynh ◽  
Sy Tuan Tran ◽  
Huu Lam Phan ◽  
Duy Tung Phan
Keyword(s):  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Split Ring Resonator ◽  
Antenna Element ◽  
Mimo Antenna ◽  
Complementary Split Ring Resonator ◽  
Antenna Performance ◽  
Multiple Input ◽  
Input Multiple Output ◽  
The Individual

A compact three-port metamaterial multiple-input-multiple-output (MIMO) antenna using complementary split-ring resonator (CSRR) loaded ground have demonstrated in order to miniaturize the size and improve the antenna performance. The antenna is designed on FR4 material and simulated by HFSS software. By loading CSRRs in the ground plane, the size reduction of 77% of the individual patch antenna element is achieved, which appeared to be the major reason for the obtained the compact MIMO antenna. Furthermore, the simulated results show that the proposed MIMO antenna achieves the total gain higher than 5 dB, the isolation less than -11 dB, the envelope correlation coefficient (ECC) value lower than 0.015, and the bandwidth of 100 MHz through the whole WLAN band from 2.4 GHz to 2.484 GHz, indicating promises for WLAN applications.

scholarly journals Dual-Band 2 × 2 MIMO Antenna with Compact Size and High Isolation Based on Half-Mode SIW

2020 ◽  
Vol 2020 ◽  
pp. 1-11
Author(s):  
Abubaker Ahmed Elobied ◽  
Xue-Xia Yang ◽  
Ningjie Xie ◽  
Steven Gao
Keyword(s):  
Multiple Input Multiple Output ◽  
Dual Band ◽  
Antenna Element ◽  
Mimo Antenna ◽  
High Isolation ◽  
Rectangular Patch ◽  
Compact Size ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Proximity Coupling

This paper presents a close-spaced dual-band 2 × 2 multiple-input multiple-output (MIMO) antenna with high isolation based on half-mode substrate integrated waveguide (HMSIW). The dual-band operation of the antenna element is achieved by loading a rectangular patch outside the radiating aperture of an HMSIW cavity. The HMSIW cavity is excited by a coaxial probe, whereas the rectangular patch is energized through proximity coupling by the radiating aperture of HMSIW. The antenna elements can be closely placed using the rotation and orthogonal arrangement for a 2 × 2 array. Small neutralization lines at the center of the MIMO antenna can increase the isolation among its elements by around 10 dB in the lower band and 5 dB in the higher band. A prototype of the MIMO antenna is fabricated and its performance is measured. The measured results show that the resonant frequencies are centered at 4.43 and 5.39 GHz with bandwidths of 110 and 80 MHz and peak gains of 6 and 6.4 dBi, respectively. The minimum isolation in both bands is greater than 35 dB. The envelope correlation coefficient is lower than 0.005 within two operating bands.

Design of a wearable MIMO antenna deployed with an inverted U-shaped ground stub for diversity performance enhancement

2020 ◽  
pp. 1-11
Author(s):  
Anupma Gupta ◽  
Ankush Kansal ◽  
Paras Chawla
Keyword(s):  
Performance Enhancement ◽  
Multiple Input Multiple Output ◽  
The Body ◽  
Structural Deformation ◽  
Mimo Antenna ◽  
Tissue Phantom ◽  
Capacity Loss ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Broadside Radiation

Abstract A compact multiple input multiple output (MIMO) antenna operating at 2.45 GHz industrial scientific and medical band is presented for wearable devices. Open-end slotting is used to miniaturize the antenna dimensions. Inverted U-shaped ground stub is incorporated to reduce mutual coupling. On-body performance is analyzed on a three-layered equivalent tissue phantom model. The wide bandwidth of 300 MHz and port isolation of 30 dB are obtained from measured results. The antenna shows the efficiency of 40% and directivity of 4.56 dBi when placed at a gap of “s” = 4 mm from the body. Broadside radiation pattern and low specific absorption rate make the antenna suitable for on-body communication. Further, diversity performance is measured in terms of envelope correlation coefficient (ECC), diversity gain (DG), and channel capacity loss (CCL). The value of ECC is 0.025, DG is 9.98 dB, and CCL is 0.12 bits/s/Hz at 2.45 GHz. Antenna robustness is examined by bending the structure at different radii along the x-axis and y-axis. Performance of the proposed structure is reliable with structural deformation.

scholarly journals Modified U-Shaped Resonator as Decoupling Structure in MIMO Antenna

Electronics ◽  
2020 ◽  
Vol 9 (8) ◽  
pp. 1321
Author(s):  
Amjad Iqbal ◽  
Ahsan Altaf ◽  
Mujeeb Abdullah ◽  
Mohammad Alibakhshikenari ◽  
Ernesto Limiti ◽  
...  
Keyword(s):  
Multiple Input Multiple Output ◽  
Equivalent Circuit Model ◽  
Separation Distance ◽  
Antenna System ◽  
Parametric Modelling ◽  
Mimo Antenna ◽  
Antenna Performance ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Simple Assembly

This paper presents an isolation enhancement of two closely packed multiple-input multiple-output (MIMO) antenna system using a modified U-shaped resonator. The modified U-shaped resonator is placed between two closely packed radiating elements resonating at 5.4 GHz with an edge to edge separation distance of 5.82 mm (λ∘/10). Through careful adjustment of parametric modelling, the isolation level of −23 dB among the densely packed elements is achieved. The coupling behaviour of the MIMO elements is analysed by accurately designing the equivalent circuit model in each step. The antenna performance is realized in the presence and absence of decoupling structure, and the results shows negligible effects on the antenna performance apart from mutual coupling. The simple assembly of the proposed modified U-shaped isolating structure makes it useful for several linked applications. The proposed decoupling structure is compact in nature, suppress the undesirable coupling generated by surface wave and nearby fields, and is easy to fabricate.

Sign in / Sign up

Export Citation Format

Share Document