scholarly journals Implementation of a Zero-Forcing Precoding Algorithm Combined with Adaptive Beamforming Based on WiMAX System

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
Hyunwook Yang ◽  
Seungwon Choi
Keyword(s):  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Experimental System ◽  
Multiple Access Interference ◽  
Adaptive Beamforming ◽  
Base Station ◽  
Zero Forcing ◽  
Single Antenna ◽  
Input Multiple Output ◽  
Wimax System

We propose a novel precoding algorithm that is a zero-forcing (ZF) method combined with adaptive beamforming in the Worldwide Interoperability for Microwave Access (WiMAX) system. In a Multiuser Multiple-Input Multiple-Output (MU-MIMO) system, ZF is used to eliminate the Multiple Access Interference (MAI) in order to allow several users to share a common resource. The adaptive beamforming algorithm is used to achieve the desired SNR gain. The experimental system consists of a WiMAX base station that has 2 MIMO elements, each of which is composed of three-array antennas and two mobile terminals, each of which has a single antenna. Through computer simulations, we verified that the proposed method outperforms the conventional ZF method by at least 2.4 dB when the BER is 0.1%, or 1.7 dB when the FER is 1%, in terms of the SNR. Through a hardware implementation of the proposed method, we verified the feasibility of the proposed method for realizing a practical WiMAX base station to utilize the channel resources as efficiently as possible.

A companding approach for PAPR suppression in OFDM based massive MIMO system

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Ajay Kumar Yadav ◽  
Pritam Keshari Sahoo ◽  
Yogendra Kumar Prajapati
Keyword(s):  
Massive Mimo ◽  
Orthogonal Frequency Division Multiplexing ◽  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Average Power ◽  
Base Station ◽  
Convex Optimization Problem ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Mimo Ofdm

Abstract Orthogonal frequency division multiplexing (OFDM) based massive multiuser (MU) multiple input multiple output (MIMO) system is popularly known as high peak-to-average power ratio (PAPR) issue. The OFDM-based massive MIMO system exhibits large number of antennas at Base Station (BS) due to the use of large number of high-power amplifiers (HPA). High PAPR causes HPAs to work in a nonlinear region, and hardware cost of nonlinear HPAs are very high and also power inefficient. Hence, to tackle this problem, this manuscript suggests a novel scheme based on the joint MU precoding and PAPR minimization (PP) expressed as a convex optimization problem solved by steepest gradient descent (GD) with μ-law companding approach. Therefore, we develop a new scheme mentioned to as MU-PP-GDs with μ-law companding to minimize PAPR by compressing and enlarging of massive MIMO OFDM signals simultaneously. At CCDF = 10−3, the proposed scheme (MU-PP-GDs with μ-law companding for Iterations = 100) minimizes the PAPR to 3.70 dB which is better than that of MU-PP-GDs, (iteration = 100) as shown in simulation results.

scholarly journals Beam division multiple access for millimeter wave massive MIMO: Hybrid zero-forcing beamforming with user selection

2022 ◽  
Vol 12 (1) ◽  
pp. 445
Author(s):  
Hong Son Vu ◽  
Kien Truong ◽  
Minh Thuy Le
Keyword(s):  
Multiple Access ◽  
Mimo Systems ◽  
Multiple Input Multiple Output ◽  
Base Station ◽  
Zero Forcing ◽  
Multiuser Interference ◽  
Novel Approach ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Promising Solution

<p>Massive multiple-input multiple-output (MIMO) systems are considered a promising solution to minimize multiuser interference (MUI) based on simple precoding techniques with a massive antenna array at a base station (BS). This paper presents a novel approach of beam division multiple access (BDMA) which BS transmit signals to multiusers at the same time via different beams based on hybrid beamforming and user-beam schedule. With the selection of users whose steering vectors are orthogonal to each other, interference between users is significantly improved. While, the efficiency spectrum of proposed scheme reaches to the performance of fully digital solutions, the multiuser interference is considerably reduced.</p>

scholarly journals Pilot Assignment Based on Graph Coloring and Location Information in Multicell Multiuser Massive MIMO Systems

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Canyun Xiong ◽  
Shiyong Chen ◽  
Liang Li ◽  
Yucheng Wu
Keyword(s):  
Graph Coloring ◽  
Mimo Systems ◽  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Base Station ◽  
Location Information ◽  
Angle Of Arrival ◽  
Intercell Interference ◽  
Interference Graph ◽  
Input Multiple Output

A massive multiple-input multiple-output (MIMO) system uses a large number of antennas in the base station (BS) to serve multiple users, which significantly improves the capacity of the system. However, in time division duplex (TDD) mode, the pilot contamination (PC) is inevitable due to the multiplexing of pilots. This paper proposed a pilot assignment based on graph coloring and location information (GC-LI) to improve the performance of users. Specifically, based on graph coloring, the proposed GC-LI algorithm combines location information like the angle of arrival (AoA), distance, and correlation to construct an interference graph. Then, we calculate the interference between any two users and use the postprocessing discrete Fourier transform (DFT) filtering process to effectively distinguish the users with nonoverlapping AoAs. Finally, according to the interference graph, the GC-LI algorithm is proposed to mitigate the intercell interference (ICI) between users with the same pilot by assigning different pilots to connected users with high ICI metrics based on some regulation. Simulation results show that the GC-LI algorithm is suitable for various types of cells. In addition, compared with the existing pilot assignment algorithms based on graph coloring, users’ average signal-to-interference-plus-noise ratio (SINR) and uplink achievable sum rate (ASR) are significantly improved.

scholarly journals Mitigating the Interference Caused by Pilot Contamination in Multi-cell Massive Multiple Input Multiple Output Systems Using Low Density Parity Check Codes in Uplink Scenario

2020 ◽  
Vol 37 (6) ◽  
pp. 1061-1074
Author(s):  
Lokesh Bhardwaj ◽  
Ritesh Kumar Mishra
Keyword(s):  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Base Station ◽  
Low Density ◽  
Pilot Contamination ◽  
Parity Check ◽  
Low Density Parity Check ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Sum Rate

The effects of pilot contamination (PC) on the performance of multi-cell multi-user massive multiple input multiple output (MC-MU-m-MIMO) system in uplink has been analyzed in this article. In a multi-cell scenario, the channel estimation (CE) at the desired cell using pilot reuse to avoid significant overhead results in poor CE due to PC. The improvement in degraded performance due to the effect of PC has been shown using low Density Parity Check (LDPC) codes. The comparative analysis of performance in terms of variation in bit error rate (BER) with the signal to noise ratio (SNR) for LDPC coded and uncoded information blocks of users has been shown when the number of cells sharing the same frequency band is varied. Further, the expression for sum-rate has been derived and its variation with the number of base station (BS) antennas has also been shown. The simulated results have shown that the LDPC coded scheme performs better than the uncoded counterpart and the sum-rate capacity increases when the strength of channel coefficients between the BS antennas of the desired cell and the users of remaining cells is less.

scholarly journals Sum-Rate of Multi-User MIMO Systems with Multi-Cell Pilot Contamination in Correlated Rayleigh Fading Channel

Entropy ◽  
2019 ◽  
Vol 21 (6) ◽  
pp. 573 ◽  
Author(s):  
Menghan Wang ◽  
Dongming Wang
Keyword(s):  
Rayleigh Fading ◽  
Gaussian Approximation ◽  
Mimo Systems ◽  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Moment Generating Function ◽  
Base Station ◽  
Pilot Contamination ◽  
Input Multiple Output ◽  
Sum Rate

This paper presents some exact results on the sum-rate of multi-user multiple-input multiple-output (MU-MIMO) systems subject to multi-cell pilot contamination under correlated Rayleigh fading. With multi-cell multi-user channel estimator, we give the lower bound of the sum-rate. We derive the moment generating function (MGF) of the sum-rate and then obtain the closed-form approximations of the mean and variance of the sum-rate. Then, with Gaussian approximation, we study the outage performance of the sum-rate. Furthermore, considering the number of antennas at base station becomes infinite, we investigate the asymptotic performance of the sum-rate. Theoretical results show that compared to MU-MIMO system with perfect channel estimation and no pilot contamination, the variance of the sum-rate of the considered system decreases very quickly as the number of antennas increases.

scholarly journals Deep Learning Based Antenna Selection for MIMO SDR System

Sensors ◽  
2020 ◽  
Vol 20 (23) ◽  
pp. 6987
Author(s):  
Shida Zhong ◽  
Haogang Feng ◽  
Peichang Zhang ◽  
Jiajun Xu ◽  
Huancong Luo ◽  
...  
Keyword(s):  
Decision Making ◽  
Deep Learning ◽  
Software Defined Radio ◽  
Antenna Selection ◽  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Base Station ◽  
Input Multiple Output ◽  
Set Up ◽  
Time Division

In this paper, we propose and implement a novel framework of deep learning based antenna selection (DLBAS)-aided multiple-input–multiple-output (MIMO) software defined radio (SDR) system. The system is constructed with the following three steps: (1) a MIMO SDR communication platform is first constructed, which is capable of achieving uplink communication from users to the base station via time division duplex (TDD); (2) we use the deep neural network (DNN) from our previous work to construct a deep learning decision server to assist the MIMO SDR platform for making intelligent decision for antenna selection, which transforms the optimization-driven decision making method into a data-driven decision making method; and (3) we set up the deep learning decision server as a multithreading server to improve the resource utilization ratio. To evaluate the performance of the DLBAS-aided MIMO SDR system, a norm-based antenna selection (NBAS) scheme is selected for comparison. The results show that the proposed DLBAS scheme performed equally to the NBAS scheme in real-time and out-performed the MIMO system without AS with up to 53% improvement on average channel capacity gain.

A wideband 4-port MIMO antenna supporting sub-6 GHz spectrum for 5G mobile terminals

Frequenz ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Mohammad Ahmad Salamin ◽  
Niamat Hussain
Keyword(s):  
Mimo System ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Good Choice ◽  
Antenna Element ◽  
Mimo Antenna ◽  
Single Antenna ◽  
Fifth Generation ◽  
New Radio ◽  
Input Multiple Output

Abstract In this work, a unique wideband multiple-input multiple-output (MIMO) antenna for fifth-generation (5G) applications is introduced. Each antenna element in the MIMO system is formed using a modified parasitic ring. To improve the performance of the antenna, a rectangular-shaped region is etched into the opposite side of each element in the ground plane. The proposed MIMO antenna is designed on a commercially available FR-4 substrate, having total dimensions of 100 × 60 × 0.8 mm3. Most interestingly, the antenna has a measured bandwidth from 2.60 to 5.97 GHz. This will effectively encompass the most predicted feasible bands for futuristic 5G communications, including 5G new radio frequency bands (N77/N78/N79) and long-term evolution (LTE) 46 band. The performance of a single antenna is evaluated in terms of S-parameters, gain, radiation patterns and efficiency. The performance of the MIMO system is also evaluated in terms of the envelope correlation coefficient (ECC) and diversity gain (DG). The designed antenna is fabricated, and the simulation results are verified practically. Good agreement is reached between simulation and measurement results. The proposed design is a good choice for 5G applications that require wideband capabilities.

scholarly journals Secure Massive MIMO System with Two-Way Relay Cooperative Transmission in 6G Networks

2020 ◽  
Author(s):  
Yumeng Su ◽  
Hongyuan Gao ◽  
Shibo Zhang
Keyword(s):  
Massive Mimo ◽  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Base Station ◽  
Cooperative Transmission ◽  
Transmission Mode ◽  
Security Issue ◽  
Legitimate User ◽  
Input Multiple Output ◽  
Multiple Relay

Abstract With the advent of Internet of Everything (IoE) and the era of big data, massive multiple-input multiple-output (MIMO) is considered an essential technology to meet the growing communication requirements for beyond 5G and the forthcoming 6G networks. This paper considers a secure massive MIMO system, where the legitimate user and the base station (BS) exchange messages via two-way relays with the presence of passive eavesdroppers. To achieve the trade-off between the physical-layer security and communication reliability, we design a cooperative transmission mode based on multiple-relay collaboration, where some relays broadcast the received signals and other relays act as friendly jammers to prevent the interception by eavesdroppers. A quantum chemical reaction optimization (QCRO) algorithm is proposed to find the most suitable scheme for multiple-relay collaboration. Simulation results highlight excellent performance of the proposed transmission mode under QCRO in different communication scenarios, which can be considered a potential solution for the security issue in future wireless networks.

scholarly journals Capacity Analysis and Linear Detection in Massive MIMO for 5G Wireless Systems

2019 ◽  
Vol 8 (9) ◽  
pp. 2938-2943
Keyword(s):  
Massive Mimo ◽  
Multiple Input Multiple Output ◽  
Symbol Error Rate ◽  
Base Station ◽  
Matlab Simulation ◽  
Maximum Ratio Combining ◽  
Single Antenna ◽  
Air Interface ◽  
Multiple Input ◽  
Input Multiple Output

Multiple Input Multiple Output (MIMO) is an attractive air interface solution which is used in the 4 th generation wireless networks to achieve higher data rate. With a very large antenna array in Massive MIMO the capacity will increase drastically. In this paper channel capacity comparison for MIMO using known Channel State Information (CSI) and unknown CSI has been carried out for a higher number of antennas at transmitter and receiver side. It has shown that at lower SNR known CSI will give better performance compared to unknown CSI. At higher SNR known CSI and unknown CSI will provide similar results. Capacity comparison has been evaluated with help of MATLAB for known CSI and unknown CSI from a small number of antennas to hundred of antennas. Also, the performance evaluated with MATLAB simulation of linear detectors zero-forcing (ZF) and maximum ratio combining (MRC) method for large number of antennas at Base station (BS) which are serving a small number of single antenna users. Performance is evaluated in terms of Symbol Error Rate (SER) for ZF and MRC, and results show that ZF will outperform MRC. It has also been analyzed that increasing the antennas at BS for a small number of users will also help to reduce SER.

scholarly journals Uplink Multiuser MIMO-OFDM System in the Presence of Phase Noises, Power Imbalance, and Correlation

2018 ◽  
Vol 2018 ◽  
pp. 1-8
Author(s):  
Xiaoming Chen ◽  
Andreas Wolfgang ◽  
Tommy Svensson
Keyword(s):  
Orthogonal Frequency Division Multiplexing ◽  
Mimo Systems ◽  
Multiple Input Multiple Output ◽  
Base Station ◽  
Closed Form Expression ◽  
Ofdm System ◽  
Multiuser Mimo ◽  
Single Antenna ◽  
Input Multiple Output ◽  
Mimo Ofdm

The effects of phase noises (PNs), power imbalances, and correlations on multiuser orthogonal frequency division multiplexing (OFDM) multiple-input multiple-output (MIMO) systems are studied. It is assumed that each user is equipped with a single antenna, whereas the base station (BS) has multiple antennas and use zero-forcing (ZF) decoder for multiuser detection. Since each user has an independent oscillator, the received uplink (UL) signal at each BS antenna is corrupted by all of these independent PNs. Furthermore, there may be power imbalances and correlations (due to common scatterers) between different users. These impairments are jointly analyzed in this work. A closed-form expression of the mean square error (MSE) performance of the multiuser MIMO-OFDM system is derived. The analytical results are verified by simulations.

Sign in / Sign up

Export Citation Format

Share Document