scholarly journals Changes in Acidity, TSS, and Sugar Content at Different Storage Periods of the Postharvest Mango (Mangifera indicaL.) Influenced by Bavistin DF

2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
Md. Khairul Islam ◽  
M. Z. H. Khan ◽  
M. A. R. Sarkar ◽  
Nurul Absar ◽  
S. K. Sarkar
Keyword(s):  
Physicochemical Properties ◽  
Shelf Life ◽  
Block Design ◽  
Sugar Content ◽  
Titratable Acidity ◽  
Storage Duration ◽  
Randomized Complete Block Design ◽  
Soluble Solid ◽  
Single Effect ◽  
Different Levels

A detailed study was carried out with the postharvest mangoes (namely, the Langra and the Khirshapat) treated with different levels of Bavistin DF (BDF) solution (namely, 250, 500, and 750 ppm) for obtaining results on biochemical changes as well as storability of postharvest mango. The experiment was laid out in randomized complete block design with three replicates. The results of the experiments exhibited that only the single effect of varieties was found to be significant in most of the parameters studied. The Langra enriched a greater quantity of titratable acidity and total soluble solid (TSS) at 3rd day, over the Khirshapat. On the other hand, Khirshapat showed increased pulp pH and TSS at all the storage duration. The results explored that some physicochemical properties, namely, pulp pH, TSS, sugar (total, reducing, and nonreducing), and titratable acidity along with shelf life drastically decreased from untreated mangoes. Bavistin DF with the doses of 750 ppm showed better results in delaying the changes in physicochemical properties and extended shelf life.

scholarly journals Effect of heat treatment with biopreparation on the quality of tomato fruit during storage

2021 ◽  
Vol 3 (3(59)) ◽  
pp. 40-45
Author(s):  
Olesia Priss ◽  
Valentina Zhukova ◽  
Serhii Holiachuk ◽  
Tetiana Karman
Keyword(s):  
Heat Treatment ◽  
Shelf Life ◽  
Tomato Fruit ◽  
Sugar Content ◽  
Titratable Acidity ◽  
Biologically Active ◽  
Biological Product ◽  
Storage Duration ◽  
Tomato Fruits ◽  
Natural Substances

Tomato fruits are characterized by a high content of biologically active substances, which makes them an irreplaceable component of nutrition. However, tomatoes are perishable products and require additional measures to extend storage. One of the most problematic areas is the limited use of synthetic chemicals for processing fruit prior to storage. An alternative to them are natural exogenous preparations with antioxidant and disinfectant effects, which are environmentally friendly. However, the treatment of fruits with natural substances does not have sufficient efficiency in comparison with synthetic ones, which requires a combination with other post-harvest measures to increase cold stress. The object of research is the process of storing tomato fruits using heat treatment with a biological product. Numerous studies indicate the feasibility of using the processing of fruits with biological products to extend their storage duration. Standardized preparations based on bee products are of great interest. The research carried out in this work is aimed at extending the shelf life of tomato fruits while maintaining their quality by heat treatment of tomatoes with a solution of a biological product (tincture of the biomass of the larvae of the greater wax moth) before storage. In the course of the study, it was found that such treatment prolongs the shelf life of blank tomatoes up to 50 days, which is 40 % longer compared to the control. It has been proven that fruits treated with a biological product demonstrate a low level of metabolic processes. This is due to the fact that the proposed treatment slows down the rate of accumulation and degradation of sugars and organic acids. In particular, in fruits treated with a biological product, the sugar content is 8.8–10.6 % higher than in the control. The rate of decrease in the level of titratable acidity in the variants treated with the biological product is 15–19 % slower than in the control. The above results indicate the effectiveness of the use of a biological product for storing tomato fruits in comparison with similar measures.

scholarly journals Improvement of Shelf Life and Sensory Quality of Pummelos by Fruit Waxing and Wrapping

2017 ◽  
Vol 4 (1) ◽  
pp. 13-20
Author(s):  
Titistyas Gusti Aji ◽  
Slamet Susanto ◽  
Dewi Sukma ◽  
Sintho Wahyuning Ardie
Keyword(s):  
Weight Loss ◽  
Shelf Life ◽  
Block Design ◽  
Chemical Change ◽  
Fruit Weight ◽  
Randomized Complete Block Design ◽  
Two Factors ◽  
Soluble Solid ◽  
Physical And Chemical

The aims of this study were to evaluate the physical and chemical change of pummelo fruit during storage with waxing and wrapping, and to determine the effect of waxing and wrapping and their  its interaction in affecting shelf life of pummelo fruits. This research was arranged in a randomized complete block design with two factors and three replications. The first factor was waxing consisted of without waxing, 10% beeswax, 5% beeswax, and chitosan. The second factor was wrapping consisted of without wrapping and wrapping using either transparent yellow or white plastic wrap. Pummelo fruits experience weight loss, reduced total soluble solid (TSS), decrease in firmness and total acidity during 48 days of storage in room temperature. Waxing using beeswax or wrapping using plastic wraps significantly suppressed weight loss and maintained fruit firmness compared to those without waxing and wrapping. However, waxing and wrapping did not significantly affect the quality of pummelo fruits. Based on the fruit’s weight loss, firmness, and panelist preferences, 5% or 10% bees wax can be used as waxing. Both transparent yellow and white plastic wraps can be used to maintain fruit weight, firmness, and appearances during storage. 

Effect of different time of bagging for ensuring quality mangoes Cv. Mishribhog

2020 ◽  
Vol 25 (2) ◽  
pp. 2114-2121
Author(s):  
M. T. Islam ◽  
M. S. Zoha ◽  
M. S. Uddin ◽  
M. A. Bari ◽  
M. H. Rahman ◽  
...  
Keyword(s):  
Shelf Life ◽  
Sensory Quality ◽  
Block Design ◽  
White Paper ◽  
Quality Parameters ◽  
Environment Friendly ◽  
Randomized Complete Block Design ◽  
Soluble Solid ◽  
Β Carotene ◽  
Fruit Bagging

Fruit bagging is a newly developed technology, widely used by the farmers, easy practice, and environment friendly and useful for high quality mango production in Bangladesh Four treatments were included in this experiment namely non-bag (control); white polythene bag; single layered white paper bag and double layered brown paper bag. The fruits were bag at 35, 45 and 55 days after fruit set. The experiment was carried out in the Randomized Complete Block Design with three replications. Fruit bagging has direct effect on fruit length, diameter, fresh weight and pulp weight (9.49cm, 8.31cm, 295.8g and 267.4g, respectively) while minimum was recorded in non-bagged control fruits (7.75cm, 6.91cm, 211.1g and 182.0g, respectively) at 35 and 45 days. In addition, the total sugar, reducing sugars, total soluble solid, ascorbic acid, pH and β-carotene were improved over control fruits. Brown paper bags are competent to change the fruit color. Brown paper bag extended shelf life up to 9 days with premier sensory quality as against 5 days of non-bagged control fruits.Considering the results, double layered brown and single layered white paper bagged fruits performed the best in respect of quality parameters and extending shelf life in mango cv. Mishribhog.

scholarly journals Correlating Capsaicinoid Levels and Physicochemical Proper-ties of Kimchi and Its Perceived Spiciness

Foods ◽  
2021 ◽  
Vol 10 (1) ◽  
pp. 86
Author(s):  
So-Ra Yoon ◽  
Yun-Mi Dang ◽  
Su-Yeon Kim ◽  
Su-Yeon You ◽  
Mina K. Kim ◽  
...  
Keyword(s):  
Correlation Analysis ◽  
Physicochemical Properties ◽  
Correlation Coefficient ◽  
Partial Correlation ◽  
Sugar Content ◽  
Amino Acid Content ◽  
Titratable Acidity ◽  
Free Sugar ◽  
Partial Correlation Analysis ◽  
The Relationship

Capsaicinoid content, among other factors, affects the perception of spiciness of commercial kimchi. Here, we investigated whether the physicochemical properties of kimchi affect the spicy taste of capsaicinoids perceived by the tasting. High-performance liquid chromatography (HPLC) was used to evaluate the capsaicinoid content (mg/kg) of thirteen types of commercial kimchi. The physicochemical properties such as pH, titratable acidity, salinity, free sugar content, and free amino acid content were evaluated, and the spicy strength grade was determined by selected panel to analyze the correlation between these properties. Panels were trained for 48 h prior to actual evaluation by panel leaders trained for over 1000 h according to the SpectrumTM method. Partial correlation analysis was performed to examine other candidate parameters that interfere with the sensory evaluation of spiciness and capsaicinoid content. To express the specific variance after eliminating the effects of other variables, partial correlations were used to estimate the relationships between two variables. We observed a strong correlation between spiciness intensity ratings and capsaicinoid content, with a Pearson’s correlation coefficient of 0.78 at p ≤ 0.001. However, other specific variables may have influenced the relationship between spiciness intensity and total capsaicinoid content. Partial correlation analysis indicated that the free sugar content most strongly affected the relationship between spiciness intensity and capsaicinoid content, showing the largest first-order partial correlation coefficient (rxy/z: 0.091, p ≤ 0.01).

scholarly journals Genetic Variability and Association Analysis of SomeQuantitative Characters in Sweet Corn

2013 ◽  
Vol 41 (2) ◽  
pp. 404
Author(s):  
Ozlem ALAN ◽  
Gulcan KINACI ◽  
Engin KINACI ◽  
Imren KUTLU ◽  
Zekiye BUDAK BASCİFTCİ ◽  
...  
Keyword(s):  
Genetic Variability ◽  
Yield Components ◽  
Sweet Corn ◽  
Block Design ◽  
Sugar Content ◽  
Yield Potential ◽  
Genetic Advance ◽  
Solid Concentration ◽  
Kernel Quality ◽  
Soluble Solid

The objective of this study was to determine genetic variability, heritability, genetic advance, genotypic and phenotypic correlations of yield, yield components and kernel quality traits in seven sweet corn varieties. The present research was conducted during 2009 and 2010 growing season in Eskisehir, midwestern Turkey. The trials were set up in randomised complete block design with four replications. Analysis of variance observed highly significant differences for all the examined traits in both years. Sugar content, soluble solid concentration and number of leaves per plant revealed the highest genotypic and phenotypic coefficient of variation values. The high heritability estimates coupled with high genetic advance for sugar content, soluble solid concentration and starch content. Positive correlations were revealed between yield (husked, dehusked and fresh kernel) and yield components except plant height and 1000 seed weight. Negative correlations were found between kernel quality and yield and yield related traits. It can be concluded that, husked ear weight and dehusked ear weight could be used as the main criteria for yield improvement. It should be unfeasible to develop sweet corn varieties with satisfactory yield potential and improved kernel quality for the different sweet corn markets.

scholarly journals Productivity, quality of fruits and architecture of Jalapeño pepper at different planting densities

2019 ◽  
Vol 37 (3) ◽  
pp. 331-337
Author(s):  
Carlos Francisco Ragassi ◽  
Juliana Zucolotto ◽  
Lucas M Gomes ◽  
Cláudia SC Ribeiro ◽  
Nuno Rodrigo Madeira ◽  
...  
Keyword(s):  
Fruit Quality ◽  
Plant Architecture ◽  
Block Design ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Randomized Complete Block Design ◽  
Total Titratable Acidity ◽  
Second Year ◽  
Increase In Productivity

ABSTRACT Mechanizing the harvest of Jalapeño pepper involves changes in the production system. Spacings between plants in rows (10 to 40 cm; 60 cm fixed between rows) were evaluated in relation to plant architecture, productivity and fruit quality of cultivar BRS Sarakura during three years, in a randomized complete block design with five replicates. Productivity (41.9 to 78.8 t ha-1) and plant height (40.1 to 47.3 cm) responded linearly to density; on the other hand, productivity per plant responded negatively (0.48 to 1.04 kg plant-1). The stem first bifurcation height was little influenced. Fruit chemical analyses were carried out in the second year of the experiment; spacing significantly influenced pH (5.36 to 4.84), total titratable acidity (TTA) (0.48 to 0.36%) and total soluble solids (TSS)/TTA ratio (11.5 to 15.6); no influence on TSS (5.65%) was noticed, though. The increase of plant population provided an increase in productivity without affecting fruit quality; the highest height of the first bifurcation achieved may not be enough to enable mechanized harvesting of the cultivar BRS Sarakura.

scholarly journals Production and quality of banana ‘BRS Conquista’ bagged with different colored polypropylene bags

2019 ◽  
Vol 13 (2) ◽  
pp. 171-177
Author(s):  
Rafaelly Calsavara Martins ◽  
Jackson Mirellys Azevêdo Souza ◽  
Marcelo De Souza Silva ◽  
Nathália De Souza Parreiras ◽  
Marcela Sant'Anna Cordeiro da Silva ◽  
...  
Keyword(s):  
Total Mass ◽  
Mass Number ◽  
New Technologies ◽  
Block Design ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Randomized Complete Block Design ◽  
Plastic Bag ◽  
Maturation Index

Worldwide, the second most traded fruit is banana, which is highly appreciated by Brazilian consumers. Moreover, new technologies have been used to improve fruit quality during cultivation. This study aimed to assess the influence of plastic bag colors on the production and quality of banana ‘BRS Conquista’. The treatments consisted of the use of commercial polypropylene bags e colored white, black, red or blue, in addition to the control (non-bagged). This study used a randomized complete block design with five treatments, four replicates and four plants per plot, totalling 80 plants. The assessments consisted of bunch mass; rachis mass; fruit total mass; mean cluster mass; number of fruits per bunch and per cluster; and fruit length and diameter; along with fruits physicochemical traits, such as soluble solids, titratable acidity, pulp/peel ratio and maturation index. The results indicated that no interference was obtained from the different plastic bag colors in the productive variables. However, a greater content of soluble solids was observed in the non-bagged bunches.

scholarly journals PSX-29 Levels of hay and narasin inclusion on carcass characteristics and meat composition

2019 ◽  
Vol 97 (Supplement_3) ◽  
pp. 455-455
Author(s):  
Lairana A Sardinha ◽  
Daniel M Polizel ◽  
Alexandre A Miszura ◽  
Arnaldo C Limede ◽  
José P R Barroso ◽  
...  
Keyword(s):  
Body Weight ◽  
Block Design ◽  
Carcass Characteristics ◽  
Ash Content ◽  
Carcass Weight ◽  
Initial Body Weight ◽  
Composition Data ◽  
Meat Composition ◽  
Randomized Complete Block Design ◽  
Different Levels

Abstract The objective of this study was to determinate the effects of narasin on carcass characteristics of lambs fed a diet containing different levels. Forty-four lambs were allotted in a randomized complete block design, defined by initial body weight (BW), in a 2x2 factorial arrangement. The first factor was forage (coastcross hay) inclusion (10 or 20%, DM basis) and the second factor was narasin (0 or 13 ppm). The experimental diets were isonitrogenous (17.4%, DM basis). The experiment lasted 112 days. At the end of the experiment, the lambs were slaughtered to evaluate the carcass characteristics and meat composition. Data were analyzed using the MIXED procedure of SAS and the LSMEANS option was used to obtain the means. The effects were considered significant when P < 0.05. There was no interaction between forage levels and narasin inclusion. The experimental diets did not affect the slaughter BW (54.8 ± 1.6 kg), hot carcass weight (29.3 ± 0.96 kg), dressing percentage (53.5 ± 0.67%) and LM area (18.8 ± 0.89 cm2). The inclusion of narasin increased 12th-rib fat (2.10 vs 2.75 mm; P < 0.01) and BW thickness (16.9 vs 20.2 mm; P < 0.01). The inclusion of 20% of hay decreased BW thickness (19.21 vs 17.9 mm; P = 0.03). The experimental diets did not affect the moisture (74.2 ± 0.53%) and ash content in meat (1.27 ± 0.04%). Narasin inclusion increased the fat (2.81 vs 3.62%; P < 0.01) and decreased the CP (21.3 vs 20.7%; P = 0.02) in meat composition. The inclusion of 10% of hay increased the fat in meat (3.5 vs 2.9%; P = 0.03), however, did not affect the CP content. In conclusion, the narasin inclusion and levels of hay improve the carcass characteristics and change the meat composition.

Post harvest behavior of tomato as influenced by nitrogen and potassium levels

2019 ◽  
Vol 4 (02) ◽  
pp. 140-147
Author(s):  
S. Paudel ◽  
P. Pantha
Keyword(s):  
Weight Loss ◽  
Lycopersicon Esculentum ◽  
Vitamin C ◽  
Shelf Life ◽  
Block Design ◽  
Ambient Condition ◽  
Tomato Fruits ◽  
Color Development ◽  
Randomized Complete Block Design ◽  
Four Levels

Tomato (Lycopersicon esculentum) is highly perishable and has potential for processing industries in bumper producing seasons in Nepal. The study on judicious use of nitrogen and potassium levels was aimed to explore the quality attributes along with the shelf life of tomato fruits. Three levels of nitrogen comprising 0 kg/ha (N0), 100 kg/ha (N100), 200 kg/ha (N200) and four levels of potassium 0 K2O kg/ha (K0), 80 K2O kg/ha (K80), 160 K2O kg/ha (K160), 240 K2O kg /ha (K240) were used as treatments in randomized complete block design with three replications at Chitwan (Inner Terai) Nepal. Tomatoes at breaker stage were harvested from the field and 10 fruits from each treatment per replication were kept for physiological weight loss, color rating and shelf life in ambient condition (17.5±3 0C and 80.5±6.5 % RH). Fruit quality with respect to physicochemical properties like firmness, TSS, TA, pH and Vitamin C was assessed at the end of shelf life. Higher potassium levels hasten color development and increased TSS, firmness and vitamin C content. Physiological weight loss was greatly reduced and extended shelf life was achieved with 100 kg N/ha and 240 kg K2O/ha.

scholarly journals Biomass and Sugar Content of Some Varieties of Sorghum (Sorghum Bicolor L. Moench) on Dry Land Forest as Feedstock Bioethanol

2018 ◽  
Vol 164 ◽  
pp. 01035 ◽  
Author(s):  
Praptiningsih Gamawati Adinurani ◽  
Sri Rahayu ◽  
Luluk Sulistiyo Budi ◽  
Anggi Nindita ◽  
Peeyush Soni ◽  
...  
Keyword(s):  
Biomass Production ◽  
Block Design ◽  
Sugar Content ◽  
Sustainable Use ◽  
Dry Weight ◽  
Raw Material ◽  
Dry Land ◽  
Randomized Complete Block Design ◽  
High Sugar Content ◽  
Selection Of

The possibility of sustainable use of sorghum as raw material for bioethanol needs to be supported by evaluation and selection of sorghum varieties for high biomass production and sugar content. An experiment was conducted on forest dry land , altitude 63 m asl. This research aimed to determine the interaction of sorghum varieties and mycorrhiza on biomass production and the high sugar content. The experiment was a two factor (varieties and dosage of mycorrhiza plus) in a randomized complete block design with three replications. The varieties were Suri 3, Kawali, Super 2, Suri 4. Dosage of mycorrhiza plus (5, 10, 15) g per plant. The interaction only significant on a number of internodes and bagasse. There are no effects of dosages mycorrhiza plus, however, varieties of sorghum have significant effects on many variables measured. The highest amount of biomass include the stem height (301.28 cm), stem Dry Weight (DW) is 23.48 t ha-1, leaf DW (4.65 t ha-1), panicle DW (11.35 t ha-1) and biomass DW (39.98 t ha-1) were obtained in varieties Super 2. Sugar content (16.93 %) was obtained in varieties Suri 3 and juice production (2 742.86 L ha-1) in varieties Suri 4.

Sign in / Sign up

Export Citation Format

Share Document