scholarly journals Optimal Vibration Control for Half-Car Suspension on In-Vehicle Networks in Delta Domain

2013 ◽  
Vol 2013 ◽  
pp. 1-12 ◽  
Author(s):  
Jing Lei ◽  
Shun-Fang Hu ◽  
Zuo Jiang ◽  
Guo-Xing Shi

The paper explores the optimal vibration control design problem for a half-car suspension working on in-vehicle networks in delta domain. First, the original suspension system with ECU-actuator delay and sensor-ECU delay is modeled. By using delta operators, the original system is transformed into an associated sampled-data system with time delays in delta domain. After model transformation, the sampled-data system equation is reduced to one without actuator delays and convenient to calculate the states with nonintegral time delay. Therefore, the sampled-data optimal vibration control law can be easily obtained deriving from a Riccati equation and a Stein equation of delta domain. The feedforward control term and the control memory terms designed in the control law ensure the compensation for the effects produced by disturbance and actuator delay, respectively. Moreover, an observer is constructed to implement the physical realizability of the feedforward term and solve the immeasurability problem of some state variables. A half-car suspension model with delays is applied to simulate the responses through the designed controller. Simulation results illustrate the effectiveness of the proposed controller and the simplicity of the designing approach.

Author(s):  
Jing Lei

The problem of optimal sampled-data vibration control for nonlinear systems with time delays and uncertainties is considered. With the purpose of simplifying the nonlinear optimal vibration control (NOVC) design, the original time-delay sampled-data system is converted into a discrete-time nondelayed system first, as well as the nonlinear and uncertain terms are treated as external excitations. Therefore, the design procedure for NOVC law is reduced and the successive approximation approach is sequentially developed in it. The obtained NOVC law is derived from a Riccati equation, a Stein equation, and sequences of adjoint vector difference equations. It is combined with a feedforward term, the nonlinearity and uncertainty compensator terms, and some control memory terms, which compensate for the effects produced by the disturbance, the nonlinearity and uncertainties, and the time delays. Moreover, the existence and uniqueness of NOVC law are proved and the stability of the closed-loop system is analyzed. In order to make the controller physically realizable, an observer is constructed and the corresponding dynamical control law is given. Furthermore, by this means, the NOVC law for a sampled-data quarter-car suspension model with actuator and sensor delays is designed. The results of numerical simulations illustrate that the NOVC gives satisfactory conclusions in effectiveness of suspension performance responses and feasibility of the proposed design approach.


2001 ◽  
Vol 17 (4) ◽  
pp. 173-177
Author(s):  
Der-An Wang ◽  
Yii-Mai Huang

ABSTRACTActive vibration control of a flexible beam subjected to arbitrary, unmeasurable disturbance forces is investigated in this paper. The concept of independent modal space control is adopted. Both the feedforward and feedback control is implemented here to reduce the beam vibration. Because of the existence of the disturbance forces, the feedforward control is applied by employing the idea of force cancellation. A modal space disturbance force observer is then established in this paper to observe the disturbance modal forces for the feedforward control. For obtaining the feedforward and feedback control gains with the optimal sense, the nearly optimal control law is derived, where the modal disturbance forces are regarded as additional states. The vibration control performances and the asymptotic properties of the control law are discussed.


2017 ◽  
Vol 2017 ◽  
pp. 1-13 ◽  
Author(s):  
Jing He ◽  
Lin Mi ◽  
Songan Mao ◽  
Changfan Zhang ◽  
Houguang Chu

This paper presents a fault-tolerant control scheme for a class of nonlinear systems with actuator faults and unknown input disturbances. First, the sliding mode control law is designed based on the reaching law method. Then, in view of unpredictable state variables and unknown information in the control law, the original system is transformed into two subsystems through a coordinate transformation. One subsystem only has actuator faults, and the other subsystem has both actuator faults and disturbances. A sliding mode observer is designed for the two subsystems, respectively, and the equivalence principle of the sliding mode variable structure is used to realize the accurate reconstruction of the actuator faults and disturbances. Finally, the observation value and the reconstruction value are used to carry out an online adjustment to the designed sliding mode control law, and fault-tolerant control of the system is realized. The simulation results are presented to demonstrate the approach.


Computation ◽  
2021 ◽  
Vol 9 (8) ◽  
pp. 82
Author(s):  
Alejandro Rincón ◽  
Gloria M. Restrepo ◽  
Fredy E. Hoyos

In this study, a novel robust observer-based adaptive controller was formulated for systems represented by second-order input–output dynamics with unknown second state, and it was applied to concentration tracking in a chemical reactor. By using dead-zone Lyapunov functions and adaptive backstepping method, an improved control law was derived, exhibiting faster response to changes in the output tracking error while avoiding input chattering and providing robustness to uncertain model terms. Moreover, a state observer was formulated for estimating the unknown state. The main contributions with respect to closely related designs are (i) the control law, the update law and the observer equations involve no discontinuous signals; (ii) it is guaranteed that the developed controller leads to the convergence of the tracking error to a compact set whose width is user-defined, and it does not depend on upper bounds of model terms, state variables or disturbances; and (iii) the control law exhibits a fast response to changes in the tracking error, whereas the control effort can be reduced through the controller parameters. Finally, the effectiveness of the developed controller is illustrated by the simulation of concentration tracking in a stirred chemical reactor.


1992 ◽  
Vol 15 (5) ◽  
pp. 1183-1191 ◽  
Author(s):  
Martin C. Berg ◽  
Gregory S. Mason ◽  
Gen-Sheng Yang

Author(s):  
Kazuhiko Hiramoto ◽  
Taichi Matsuoka ◽  
Akira Fukukita ◽  
Katsuaki Sunakoda

We address a simultaneous optimal design problem of a semi-active control law and design parameters in a vibration control device for civil structures. The Vibration Control Device (VCD) that is being developed by authors is used as the semi-active control device in the present paper. The VCD is composed of a mechanism of a ball screw with a flywheel for the inertial resistance force and an electric motor with an electric circuit for the damping resistance force. A new bang-bang type semi-active control law referred to as Inverse Lyapunov Approach is proposed as the semi-active control law. In the Inverse Lyapunov Approach the Lyapunov function is searched so that performance measures in structural vibration control are optimized in the premise of the bang-bang type semi-active control based on the Lyapunov function. The design parameters to determine the Lyapunov function and the design parameters of the VCD are optimized for the good performance of the semi-active control system. The Genetic Algorithm is employed for the optimal design.


Sign in / Sign up

Export Citation Format

Share Document