scholarly journals Influence of Ce Doping on the Electrical and Optical Properties of TiO2and Its Photocatalytic Activity for the Degradation of Remazol Brilliant Blue R

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
Aisha Malik ◽  
S. Hameed ◽  
M. J. Siddiqui ◽  
M. M. Haque ◽  
M. Muneer
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Dopant Concentration ◽  
Atmospheric Oxygen ◽  
Sol Gel ◽  
Analytical Techniques ◽  
Xrd Analysis ◽  
Brilliant Blue ◽  
Tem Analysis ◽  
Remazol Brilliant Blue R

Nanocrystalline TiO2particles doped with different concentrations of Cerium (Ce, 1–10%) have been synthesized using sol-gel method. The prepared particles were characterized by standard analytical techniques such as X-ray diffraction (XRD), FTIR and Scanning Electron Microscopy (SEM), and Transmission Electron Microscopy (TEM). The XRD analysis shows no change in crystal structure of TiO2after doping with different concentrations of Ce, which indicates the single-phase polycrystalline material. The SEM analysis shows the partial crystalline nature of undoped, and doped TiO2and TEM analysis shows the particle sizes were in the range of 9–14 nm in size. The a.c. analysis shows that the dielectric constantεand dielectric loss tanδdecrease with the increase in frequency. The dielectric property decreases with the increase in dopant concentration. It is also observed that the impedance increases with an increase in dopant concentration. The photocatalytic activity of the synthesized particles (Ce-doped TiO2) with dopant concentration of 9% (Ce) showed the highest photocatalytic activity for the degradation of the dye derivative Remazol Brilliant Blue R in an immersion well photochemical reactor with 500 W halogen linear lamp in the presence of atmospheric oxygen.

scholarly journals Photocatalytic Degradation of Remazol Brilliant Blue R and Remazol Yellow FG using TiO2 doped Cd, Co, Mn

2021 ◽  
Vol 16 (4) ◽  
pp. 804-815
Author(s):  
Candra Purnawan ◽  
Sayekti Wahyuningsih ◽  
Oktaviani Nur Aniza ◽  
Octaria Priwidya Sari
Keyword(s):  
Photocatalytic Activity ◽  
Metal Ion ◽  
Anatase Phase ◽  
Sol Gel ◽  
Rutile Phase ◽  
Brilliant Blue ◽  
Bandgap Energy ◽  
X Ray ◽  
Remazol Brilliant Blue R ◽  
Metal Doped

TiO2 and TiO2 doped Cd, Co, Mn (TiO2-M) were synthesized with a sol-gel method, and the photocatalytic activity of Remazol Brilliant Blue R and Remazol Yellow FG has been conducted. TiO2-M (Cd, Co, Mn) was synthesized with the mol Ti:M ratio of 3:1, and the materials were calcined at 300, 400, and 500 °C. The materials were characterized by X-ray Diffraction (XRD), Scanning Electron Microscopy-Energy Dispersive X-ray (SEM-EDX), and UV-Vis Reflectance. The XRD result shows that at the temperature of 300 °C TiO2 and TiO2-M formed tend to be amorphous. At 400 °C the anatase phase is formed, while at 500 °C the rutile phase begins to form. And overall, the crystallinity of TiO2 is higher than metal-doped TiO2. The UV-Vis Reflectance result showed that the bandgap energy of all doping materials (TiO2-M) decreased. The larger the metal ion radius of dopant, the larger the crystal size obtained  and then the higher the bandgap obtained. The results of SEM-EDX showed that the morphology of TiO2 was spherical and regular, whereas the morphology of TiO2-M had a smoother surface due to the influence of metal doping. Photocatalytic activity of TiO2-M on Remazol Brilliant Blue R and Remazol Yellow FG was greater than TiO2. The optimum pH of the solution was obtained at pH 5 and the optimum catalyst phase was obtained at the anatase phase. The percentages degradation for 30 min of Remazol Brilliant Blue R were 67.34% (TiO2), 92.12% (TiO2-Co), 85.47% (TiO2-Mn), and 83.91% (TiO2-Cd), while for Remazol Yellow FG they were 58.84% (TiO2), 74.61% (TiO2-Co), 67.93% (TiO2-Mn) and 64.19% (TiO2-Cd), respectively. Copyright © 2021 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 

scholarly journals Enhanced Photocatalytic Activity of CuWO4 Doped TiO2 Photocatalyst Towards Carbamazepine Removal under UV Irradiation

Separations ◽  
2021 ◽  
Vol 8 (3) ◽  
pp. 25
Author(s):  
Chukwuka Bethel Anucha ◽  
Ilknur Altin ◽  
Emin Bacaksız ◽  
Tayfur Kucukomeroglu ◽  
Masho Hilawie Belay ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
Sol Gel ◽  
Pure Tio2 ◽  
Component Part ◽  
Energy Yield ◽  
Mechanical Agitation ◽  
X Ray

Abatement of contaminants of emerging concerns (CECs) in water sources has been widely studied employing TiO2 based heterogeneous photocatalysis. However, low quantum energy yield among other limitations of titania has led to its modification with other semiconductor materials for improved photocatalytic activity. In this work, a 0.05 wt.% CuWO4 over TiO2 was prepared as a powder composite. Each component part synthesized via the sol-gel method for TiO2, and CuWO4 by co-precipitation assisted hydrothermal method from precursor salts, underwent gentle mechanical agitation. Homogenization of the nanopowder precursors was performed by zirconia ball milling for 2 h. The final material was obtained after annealing at 500 °C for 3.5 h. Structural and morphological characterization of the synthesized material has been achieved employing X-ray diffraction (XRD), Fourier transform infra-red (FTIR) spectroscopy, Brunauer–Emmett–Teller (BET) N2 adsorption–desorption analysis, Scanning electron microscopy-coupled Energy dispersive X-ray spectroscopy (SEM-EDS), Transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and UV-Vis diffuse reflectance spectroscopy (UV-vis DRS) for optical characterization. The 0.05 wt.% CuWO4-TiO2 catalyst was investigated for its photocatalytic activity over carbamazepine (CBZ), achieving a degradation of almost 100% after 2 h irradiation. A comparison with pure TiO2 prepared under those same conditions was made. The effect of pH, chemical scavengers, H2O2 as well as contaminant ion effects (anions, cations), and humic acid (HA) was investigated, and their related influences on the photocatalyst efficiency towards CBZ degradation highlighted accordingly.

scholarly journals Nickel and sulfur codoped TiO2 nanoparticles for efficient visible light photocatalytic activity

2021 ◽  
Author(s):  
Mehala Kunnamareddy ◽  
Ranjith Rajendran ◽  
Megala Sivagnanam ◽  
Ramesh Rajendran ◽  
Barathi Diravidamani
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Visible Light ◽  
Light Absorption ◽  
Fourier Transforms ◽  
Phase Particle ◽  
Energy Dispersive Spectrometer ◽  
Sol Gel ◽  
Bandgap Energy ◽  
Visible Light Absorption

AbstractIn this work, Nickel (Ni) and sulfur (S) codoped TiO2 nanoparticles were prepared by a sol-gel technique. The as-prepared catalyst was characterized using X-ray diffraction (XRD), Fourier transforms infrared spectroscopy (FTIR), FT-Raman spectroscopy, scanning electron microscopy (SEM), energy dispersive spectrometer (EDS), transmission electron microscopy (TEM), UV-Vis diffuse reflectance spectra (DRS) for investigating crystal structure, crystal phase, particle size and bandgap energy of these samples. The photocatalytic performances of all the prepared catalysts have been investigated for the degradation of methylene blue (MB) under visible light irradiation. It was noticed that Ni-S codoped TiO2(Ni-S/TiO2) nanoparticles exhibited much higher photocatalytic activity compared with pure, Ni and S doped TiO2 due to higher visible light absorption and probable decrease in the recombination of photo-generated charges. It was decided that the great visible light absorption was created for codoped TiO2 by the formation of impurity energy states near both the edges of the collection, which works as trapping sites for both the photogenerated charges to decrease the recombination process.

Morphology studies of a W/Cu alloy synthesized by hydrogen reduction

2006 ◽  
Vol 21 (6) ◽  
pp. 1467-1475 ◽  
Author(s):  
U. Tilliander ◽  
H. Bergqvist ◽  
S. Seetharaman
Keyword(s):  
Electron Microscopy ◽  
Composite Materials ◽  
Hydrogen Reduction ◽  
Xrd Analysis ◽  
Grain Structure ◽  
Nanocrystalline State ◽  
Tem Analysis ◽  
Cu Alloy ◽  
Morphological Studies ◽  
Pure Cu

Because of the applications for W/Cu composite materials in high technology, the advantages of synthesizing this alloy by the hydrogen reduction route were investigated, with special attention to the properties of the product that was formed. Kinetic studies of reduction indicated that the mechanism changes significantly at 923 K, and the product had unusual properties. In the present work, morphological studies of the W/Cu alloy with 20 wt% Cu, produced at 923 K, were carried out by x-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) analyses. The structural studies performed by XRD indicated that, at 923 K, Cu dissolved in W, forming a metastable solid solution in the nanocrystalline state. The samples produced at higher as well as lower temperatures, on the other hand, showed the presence of two phases, pure W and pure Cu. The SEM results were in agreement with the XRD analysis and confirmed the formation of W/Cu alloy. TEM analysis results confirmed the above observations and showed that the particle sizes were about 20 nm. The structure of the W/Cu alloy produced in the present work was compared with those for pure Cu, produced from Cu2O produced by hydrogen reduction under similar conditions. This indicated that the presence of W hinders the coalescence of Cu particles, and the alloy retains its nano-grain structure. The present results open up an interesting process route toward the production of intermetallic phases and composite materials under optimized conditions.

Sol-gel synthesis, characterisation, and photocatalytic activity of porous spinel Co3O4 nanosheets

2014 ◽  
Vol 68 (8) ◽  
Author(s):  
Manoj Pudukudy ◽  
Zahira Yaakob
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Surface Area ◽  
Uv Light ◽  
Average Pore Size ◽  
Sol Gel ◽  
Spherical Particles ◽  
Cubic Phase ◽  
Face Centered Cubic ◽  
Oriented Growth

AbstractMesoporous spinel Co3O4 nanosheets were synthesised via a simple sol-gel route using the Pluronic P123 triblock copolymer as the stabilising agent. Their structural, morphological, and textural properties were characterised. FTIR spectrum revealed the formation of cobalt oxide without any surface adsorbed impurities. Face centered cubic phase of spinel Co3O4 with the mean crystalline size of 26 nm was assigned by the X-ray diffraction analysis without the formation of other phases. Porous nanosheets and cave-like morphologies were identified from the scanning electron microscopy (SEM) images. Highly agglomerated more or less spherical particles with well separated lattice fringes, representing the oriented growth of nanocrystals, were noticed on the transmission electron microscopy photographs. Surface area analysis revealed that the spinel has high surface area of about 25 m2 g−1 with monomodal mesoporosity. The average pore size distribution was found to be about 15.8 nm. The as-prepared spinel photocatalyst showed a mild photocatalytic activity in the degradation of methylene blue (2.5 mg L−1) under UV light irradiation with air as the oxidising agent. Photocatalytic activity of the as-prepared reusable Co3O4 was found to be higher than that of the commercial spinel powder.

Cr Doped TiO2 Supported on TUD-1 Photocatalyst for Dye Photodegradation

2014 ◽  
Vol 69 (5) ◽  
Author(s):  
Ooi Yee Khai ◽  
Leny Yuliati ◽  
Siew Ling Lee
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
High Surface ◽  
Sol Gel ◽  
High Surface Area ◽  
Xrd Analysis ◽  
Bandgap Energy ◽  
Doped Tio2 ◽  
Visible Light Driven ◽  
Synthesized Materials

New visible light driven photocatalysts of 1 mol% Cr doped TiO2 supported on TUD-1 have been successfully synthesized. The Cr-TiO2/xTUD-1 (x = 10, 20, 30, 40 and 50) photocatalysts were prepared via surfactant-free sol-gel method followed by wet impregnation procedures. XRD analysis revealed that both TiO2 and Cr were incorporated in the highly porous siliceous matrix. FTIR analysis showed the existence of Si-O-Ti in all the materials. As observed, tetrahedral-coordinated Ti species were dominant in Cr-TiO2/10TUD-1, Cr-TiO2/20TUD-1 and Cr-TiO2/30TUD-1. Meanwhile, octahedral- coordinated Ti species were the dominant species in Cr-TiO2/40TUD-1 and Cr-TiO2/50TUD-1. It has been demonstrated that the amount of TUD-1 as photocatalyst support affected the wavelength response and the bandgap energy of the resulting materials. All the materials have bandgap energy of ~2.9 eV. The photocatalytic performance of the synthesized materials was tested out in dye photodegradation under visible light irradiation at 298 K for 5 hours. Results showed that all Cr-TiO2/TUD-1 materials had higher photocatalytic activity than that of Cr-TiO2. This could be explained by the high surface area and porosity provided by TUD-1 in enhancing the adsorption and diffusivities of the dye molecules, hence leading to the promising photocatalytic activity. Among the materials prepared, Cr-TiO2/30TUD-1 appeared as the most superior photocatalyst which gave the highest dye photodegradation.

TEM Study of Rutile-Phase TiO2 Nanosheets

2013 ◽  
Vol 850-851 ◽  
pp. 156-159
Author(s):  
Xin Yan Wu ◽  
Wei Xiong
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Photocatalytic Activity ◽  
Energy Dispersive Spectrometer ◽  
Sol Gel ◽  
Rutile Phase ◽  
High Photocatalytic Activity ◽  
X Ray ◽  
Transmission Electron ◽  
Sol Gel Process

TiO2 nanosheets have been successfully synthesized via a simple sol-gel process. These nanostructures were characterized by transmission electron microscopy (TEM) and x-ray energy dispersive spectrometer (EDS). The sheet-shaped single-crystalline nanostructures are pure rutile-phase structure, with landscape dimension of 10-45 nm. EDS investigation confirms that the TiO2 nanosheets are only composed of Ti and O, and the atomic ration of Ti and O is close to 1:2. High photocatalytic activity might be expected for those TiO2 nanosheets due to their large surface area.

scholarly journals Surface-Plasmon-Induced Visible Light Photocatalytic Activity of Fe3O4/TiO2 Nanocomposite

2020 ◽  
Author(s):  
Narjes Esmaeili ◽  
Azadeh Ebrahimian Pirbazari ◽  
Ziba Khodaee
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Surface Plasmon ◽  
Resonance Effect ◽  
Sol Gel ◽  
Analytical Techniques ◽  
Visible Light Photocatalytic Activity ◽  
Structure Morphology ◽  
Gel Technique ◽  
Visible Light Photocatalytic

In this research, first a binary nanocomposite of magnetic recyclable photocatalyst Fe3O4/TiO2, was synthesized by sol gel technique. Then, in order to enhance the photocatalytic activity of the synthesized nanocomposite, it was deposited by silver nanoparticles for using in degradation of organic pollutants 2, 4-dichlorophenol (2, 4-DCP) under visible light. A range of analytical techniques including XRD, FESEM/EDX, DRS, VSM and N2 physisorption were employed to reveal the crystal structure, morphology and property of the nanocomposites. We obtained 32% and 55% degradation of 2, 4-DCP under visible light after 180 min irradiation in the presence of Fe3O4/TiO2 and Fe3O4/TiO2/Ag respectively. Thus, the excellent visible light photocatalytic activity of Fe3O4/TiO2/Ag sample can be attributed to the surface plasmon resonance effect of Ag nanoparticles deposited on Fe3O4/TiO2 nanocomposite.

scholarly journals Mg and La Co-doped ZnO Nanoparticles Prepared by Sol–gel Method: Synthesis, Characterization and Photocatalytic Activity

2019 ◽  
Vol 64 (1) ◽  
pp. 61-74 ◽  
Author(s):  
Behnam Khanizadeh ◽  
Morteza Khosravi ◽  
Mohammad A. Behnajady ◽  
Ali Shamel ◽  
Behrouz Vahid
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Zno Nanoparticles ◽  
Sol Gel ◽  
Bet Surface Area ◽  
Gel Method ◽  
X Ray ◽  
Sol Gel Method ◽  
Doped Zno ◽  
Co Doped

In this study, La and Mg doped, and co-doped ZnO nanoparticles were prepared using the sol-gel method. The prepared samples were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), UV-Vis diffuse reflectance spectroscopy (DRS), and N2 physisorption techniques. The XRD results indicated that the prepared nanoparticles can be well adopted by the hexagonal wurtzite structure crystal and there are no second impurity peaks. Studies of the FESEM, EDX and TEM have shown that the samples have uniform spherical-like morphology with a homogenous distribution. The incorporation of La and Mg into the ZnO lattice had no effect on the morphology of the nanoparticles, but a reduction in the size of the grains (≈ 14 nm to ≈ 7 nm) was observed due to the insertion of these ions. The results of N2 physisorption indicated that there was an increase in BET surface area and pore volume for doped and co-doped samples. The results of DRS showed an increase in band gap energy and a blue shift at the absorption edge for doped and co-doped samples. The photocatalytic activity of the prepared catalysts was evaluated in the removal of RhB under UVA irradiation. The results showed that Mg5%-La5%/ZnO had the highest photoactivity (91.18 %) among all samples.

scholarly journals Photocatalytic Activity of Nickel Doped CoO Nanocomposite for the Degradation of Azure A Dye

2020 ◽  
Vol 33 (1) ◽  
pp. 240-244
Author(s):  
Nirmal Singh ◽  
Avinash Kumar Rai ◽  
Ritu Vyas ◽  
Rameshwar Ameta
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Degradation Rate ◽  
Dye Degradation ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
X Ray ◽  
Azure A ◽  
Transmission Electron ◽  
Working Parameters

Nanocrystalline cobalt(II) oxide doped with nickel was prepared using the sol-gel method and employed as a photocatalyst for azure A dye degradation under visible light. The prepared photocatalyst was analyzed using energy-dispersive X-ray (EDX) spectroscopy, field emission scanning electron microscopy (FESEM), Fourier-transform infrared (FTIR), X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HRTEM) techniques. The photocatalytic activity of Ni-doped CoO under different working parameters, like concentration, pH, dosage (Ni-doped and undoped CoO), light intensity for the degradation of azure A dye was also optimzed. It was observed that the dye degradation rate improved after doping. Approximately 76% and 85% of azure A dye was degraded within 90 min through undoped and Ni-doped CoO, respectively.

Sign in / Sign up

Export Citation Format

Share Document