scholarly journals Connecting Turbulence and Meandering Parameterization to Describe Passive Scalars Dispersion in Low Wind Speed Conditions

2013 ◽  
Vol 2013 ◽  
pp. 1-8
Author(s):  
V. S. Moreira ◽  
G. Degrazia ◽  
A. U. Timm ◽  
D. R. Roberti ◽  
S. Maldaner
Keyword(s):  
Boundary Layer ◽  
Wind Speed ◽  
Planetary Boundary Layer ◽  
Mathematical Formulation ◽  
Field Measurements ◽  
Horizontal Wind ◽  
Passive Scalars ◽  
Turbulence Parameterization ◽  
Low Wind Speed ◽  
Mean Time

The following study deals with meandering of the horizontal mean wind. The main motivation for such investigation came from the difficulty in describing contaminant dispersion in meandering conditions. Observational field measurements point out that the autocorrelation function of the horizontal wind components, obtained for the meandering cases, displays an oscillating behavior with the presence of large negative lobes. Such negative lobes are described by an equation containing functions that represent patterns of movement associated to meandering and turbulence. As a consequence, this mathematical formulation connects the turbulence and meandering phenomenon establishing the employment of hybrid parameters in models that describe the meandering dispersion. Therefore, considering this dualistic aspect between meandering and turbulence manifestations, a new set of relations for the turbulence parameterization joined with the meandering of the wind have been developed and are available. This new turbulence parameterization for a stable shear forcing planetary boundary layer, united with a meandering mean time scale is able to describe contaminant meandering enhanced spread in a low wind speed stable planetary boundary layer.

scholarly journals Impact of physical parameterizations and initial conditions on simulated atmospheric transport and CO<sub>2</sub> mole fractions in the US Midwest

2018 ◽  
Vol 18 (20) ◽  
pp. 14813-14835 ◽  
Author(s):  
Liza I. Díaz-Isaac ◽  
Thomas Lauvaux ◽  
Kenneth J. Davis
Keyword(s):  
Boundary Layer ◽  
Wind Speed ◽  
Boundary Conditions ◽  
Planetary Boundary Layer ◽  
Initial Conditions ◽  
Atmospheric Transport ◽  
Atmospheric Co2 ◽  
The Us ◽  
Physics Parameterizations ◽  
Physical Parameterizations

Abstract. Atmospheric transport model errors are one of the main contributors to the uncertainty affecting CO2 inverse flux estimates. In this study, we determine the leading causes of transport errors over the US upper Midwest with a large set of simulations generated with the Weather Research and Forecasting (WRF) mesoscale model. The various WRF simulations are performed using different meteorological driver datasets and physical parameterizations including planetary boundary layer (PBL) schemes, land surface models (LSMs), cumulus parameterizations and microphysics parameterizations. All the different model configurations were coupled to CO2 fluxes and lateral boundary conditions from the CarbonTracker inversion system to simulate atmospheric CO2 mole fractions. PBL height, wind speed, wind direction, and atmospheric CO2 mole fractions are compared to observations during a month in the summer of 2008, and statistical analyses were performed to evaluate the impact of both physics parameterizations and meteorological datasets on these variables. All of the physical parameterizations and the meteorological initial and boundary conditions contribute 3 to 4 ppm to the model-to-model variability in daytime PBL CO2 except for the microphysics parameterization which has a smaller contribution. PBL height varies across ensemble members by 300 to 400 m, and this variability is controlled by the same physics parameterizations. Daily PBL CO2 mole fraction errors are correlated with errors in the PBL height. We show that specific model configurations systematically overestimate or underestimate the PBL height averaged across the region with biases closely correlated with the choice of LSM, PBL scheme, and cumulus parameterization (CP). Domain average PBL wind speed is overestimated in nearly every model configuration. Both planetary boundary layer height (PBLH) and PBL wind speed biases show coherent spatial variations across the Midwest, with PBLH overestimated averaged across configurations by 300–400 m in the west, and PBL winds overestimated by about 1 m s−1 on average in the east. We find model configurations with lower biases averaged across the domain, but no single configuration is optimal across the entire region and for all meteorological variables. We conclude that model ensembles that include multiple physics parameterizations and meteorological initial conditions are likely to be necessary to encompass the atmospheric conditions most important to the transport of CO2 in the PBL, but that construction of such an ensemble will be challenging due to ensemble biases that vary across the region.

scholarly journals An investigation of ozone and planetary boundary layer dynamics over the complex topography of Grenoble combining measurements and modeling

2003 ◽  
Vol 3 (1) ◽  
pp. 797-825 ◽  
Author(s):  
O. Couach ◽  
I Balin ◽  
R. Jiménez ◽  
P. Ristori ◽  
S. Perego ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Planetary Boundary Layer ◽  
Land Surface ◽  
Mesoscale Model ◽  
Ozone Production ◽  
Horizontal Wind ◽  
Maximum Height ◽  
Complex Topography ◽  
Atmospheric Measurements ◽  
Model Calculations

Abstract. This paper concerns an evaluation of ozone (O3) and planetary boundary layer (PBL) dynamics over the complex topography of the Grenoble region through a combination of measurements and mesoscale model (METPHOMOD) predictions for three days, during July 1999. The measurements of O3 and PBL structure were obtained with a Differential Absorption Lidar (DIAL) system, situated 20 km south of Grenoble at Vif (310 m a.s.l.). The combined lidar observations and model calculations are in good agreement with atmospheric measurements obtained with an instrumented aircraft (METAIR). Ozone fluxes were calculated using lidar measurements of ozone vertical profiles concentrations and the horizontal wind speeds measured with a Radar Doppler wind profiler (DEGREANE). The ozone flux patterns indicate that the diurnal cycle of ozone production is controlled by local thermal winds. The convective PBL maximum height was some 2700 m above the land surface while the nighttime residual ozone layer was generally found between 1200 and 2200 m. Finally we evaluate the magnitude of the ozone processes at different altitudes in order to estimate the photochemical ozone production due to the primary pollutants emissions of Grenoble city and the regional network of automobile traffic.

scholarly journals Comparison of Large Eddy Simulations of a convective boundary layer with wind LIDAR measurements

2012 ◽  
Vol 8 (1) ◽  
pp. 83-86 ◽  
Author(s):  
J. G. Pedersen ◽  
M. Kelly ◽  
S.-E. Gryning ◽  
R. Floors ◽  
E. Batchvarova ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Wind Speed ◽  
Geostrophic Wind ◽  
Large Eddy Simulations ◽  
Horizontal Wind ◽  
Convective Boundary ◽  
Horizontal Wind Speed ◽  
Large Eddy ◽  
Lidar Measurements ◽  
Wind Lidar

Abstract. Vertical profiles of the horizontal wind speed and of the standard deviation of vertical wind speed from Large Eddy Simulations of a convective atmospheric boundary layer are compared to wind LIDAR measurements up to 1400 m. Fair agreement regarding both types of profiles is observed only when the simulated flow is driven by a both time- and height-dependent geostrophic wind and a time-dependent surface heat flux. This underlines the importance of mesoscale effects when the flow above the atmospheric surface layer is simulated with a computational fluid dynamics model.

scholarly journals Stable Atmospheric Boundary Layers and Diurnal Cycles: Challenges for Weather and Climate Models

2013 ◽  
Vol 94 (11) ◽  
pp. 1691-1706 ◽  
Author(s):  
A. A. M. Holtslag ◽  
G. Svensson ◽  
P. Baas ◽  
S. Basu ◽  
B. Beare ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Wind Speed ◽  
Atmospheric Boundary Layer ◽  
Climate Models ◽  
Model Performance ◽  
Weather Forecast ◽  
The Arctic ◽  
Diurnal Cycles ◽  
Low Wind Speed ◽  
Weather And Climate

The representation of the atmospheric boundary layer is an important part of weather and climate models and impacts many applications such as air quality and wind energy. Over the years, the performance in modeling 2-m temperature and 10-m wind speed has improved but errors are still significant. This is in particular the case under clear skies and low wind speed conditions at night as well as during winter in stably stratified conditions over land and ice. In this paper, the authors review these issues and provide an overview of the current understanding and model performance. Results from weather forecast and climate models are used to illustrate the state of the art as well as findings and recommendations from three intercomparison studies held within the Global Energy and Water Exchanges (GEWEX) Atmospheric Boundary Layer Study (GABLS). Within GABLS, the focus has been on the examination of the representation of the stable boundary layer and the diurnal cycle over land in clear-sky conditions. For this purpose, single-column versions of weather and climate models have been compared with observations, research models, and large-eddy simulations. The intercomparison cases are based on observations taken in the Arctic, Kansas, and Cabauw in the Netherlands. From these studies, we find that even for the noncloudy boundary layer important parameterization challenges remain.

scholarly journals Impacts of Modifications to a Local Planetary Boundary Layer Scheme on Forecasts of the Great Plains Low-Level Jet Environment

2018 ◽  
Vol 33 (5) ◽  
pp. 1109-1120 ◽  
Author(s):  
David E. Jahn ◽  
William A. Gallus
Keyword(s):  
Boundary Layer ◽  
Wind Speed ◽  
Planetary Boundary Layer ◽  
Great Plains ◽  
Potential Temperature ◽  
Specific Humidity ◽  
Low Level ◽  
Stable Conditions ◽  
Pbl Scheme ◽  
Low Level Jet

Abstract The Great Plains low-level jet (LLJ) is influential in the initiation and evolution of nocturnal convection through the northward advection of heat and moisture, as well as convergence in the region of the LLJ nose. However, accurate numerical model forecasts of LLJs remain a challenge, related to the performance of the planetary boundary layer (PBL) scheme in the stable boundary layer. Evaluated here using a series of LLJ cases from the Plains Elevated Convection at Night (PECAN) program are modifications to a commonly used local PBL scheme, Mellor–Yamada–Nakanishi–Niino (MYNN), available in the Weather Research and Forecasting (WRF) Model. WRF forecast mean absolute error (MAE) and bias are calculated relative to PECAN rawinsonde observations. The first MYNN modification invokes a new set of constants for the scheme closure equations that, in the vicinity of the LLJ, decreases forecast MAEs of wind speed, potential temperature, and specific humidity more than 19%. For comparison, the Yonsei University (YSU) scheme results in wind speed MAEs 22% lower but specific humidity MAEs 17% greater than in the original MYNN scheme. The second MYNN modification, which incorporates the effects of potential kinetic energy and uses a nonzero mixing length in stable conditions as dependent on bulk shear, reduces wind speed MAEs 66% for levels below the LLJ, but increases MAEs at higher levels. Finally, Rapid Refresh analyses, which are often used for forecast verification, are evaluated here and found to exhibit a relatively large average wind speed bias of 3 m s−1 in the region below the LLJ, but with relatively small potential temperature and specific humidity biases.

scholarly journals Set of Algorithms and Techniques for Accurate 3D, Single Beam – Single Pointing, Lidar Measurements for Slant Range Visibility, Planetary Boundary Layer Height and Wind Speed Retrieval, Atmospheric Layers Spatial Distribution and Categorization in Real Time

2020 ◽  
Vol 237 ◽  
pp. 02031
Author(s):  
Alexandros Pantazis ◽  
Alexandros Papayannis
Keyword(s):  
Boundary Layer ◽  
Spatial Distribution ◽  
Wind Speed ◽  
Real Time ◽  
Planetary Boundary Layer ◽  
Planetary Boundary Layer Height ◽  
Layer Height ◽  
Single Beam ◽  
Slant Range ◽  
Boundary Layer Height

In this work, a full set of recently developed algorithms and techniques is presented, for a single beam-single pointing lidar to be able to perform operational and independent accurate 3 Dimensional (3D) measurements, for slant range visibility, wind speed retrieval, atmospheric layers spatial distribution and categorization, as well as Planetary Boundary Layer Height (PBLH) retrieval, in real or Near Real Time (NRT).The idea behind this development was for any single lidar to be able to perform a set of accurately measured products, either mobile or stationary, with or without network connectivity with other sensors for data-information exchange. The products were determined by the needs of lidar remote scientific and commercial community, in order to be even more attractive and valuable to atmospheric scientists, meteorologists, aviation and shipping safety operators, as well as to the Space lidar community.

scholarly journals Field Measurements of Wind Characteristics Using LiDAR on a Wind Farm with Downwind Turbines Installed in a Complex Terrain Region

Energies ◽  
2020 ◽  
Vol 13 (19) ◽  
pp. 5135
Author(s):  
Tetsuya Kogaki ◽  
Kenichi Sakurai ◽  
Susumu Shimada ◽  
Hirokazu Kawabata ◽  
Yusuke Otake ◽  
...  
Keyword(s):  
Wind Speed ◽  
Wind Farm ◽  
Field Experiments ◽  
Wind Farms ◽  
Field Measurements ◽  
Horizontal Wind ◽  
Flow Distortion ◽  
Horizontal Wind Speed ◽  
Vertical Profiling ◽  
Wind Characteristics

Downwind turbines have favorable characteristics such as effective energy capture in up-flow wind conditions over complex terrains. They also have reduced risk of severe accidents in the event of disruptions to electrical networks during strong storms due to the free-yaw effect of downwind turbines. These favorable characteristics have been confirmed by wind-towing tank experiments and computational fluid dynamics (CFD) simulations. However, these advantages have not been fully demonstrated in field experiments on actual wind farms. In this study—although the final objective was to demonstrate the potential advantages of downwind turbines through field experiments—field measurements were performed using a vertical-profiling light detection and ranging (LiDAR) system on a wind farm with downwind turbines installed in complex terrains. To deduce the horizontal wind speed, vertical-profiling LiDARs assume that the flow of air is uniform in space and time. However, in complex terrains and/or in wind farms where terrain and/or wind turbines cause flow distortion or disturbances in time and space, this assumption is not valid, resulting in erroneous wind speed estimates. The magnitude of this error was evaluated by comparing LiDAR measurements with those obtained using a cup anemometer mounted on a meteorological mast and detailed analysis of line-of-sight wind speeds. A factor that expresses the nonuniformity of wind speed in the horizontal measurement plane of vertical-profiling LiDAR is proposed to estimate the errors in wind speed. The possibility of measuring and evaluating various wind characteristics such as flow inclination angles, turbulence intensities, wind shear and wind veer, which are important for wind turbine design and for wind farm operation is demonstrated. However, additional evidence of actual field measurements on wind farms in areas with complex terrains is required in order to obtain more universal and objective evaluations.

scholarly journals Distributed wind measurements with multiple quadrotor unmanned aerial vehicles in the atmospheric boundary layer

2021 ◽  
Vol 14 (5) ◽  
pp. 3795-3814
Author(s):  
Tamino Wetz ◽  
Norman Wildmann ◽  
Frank Beyrich
Keyword(s):  
Boundary Layer ◽  
Spatial Distribution ◽  
Wind Speed ◽  
Atmospheric Boundary Layer ◽  
Unmanned Aerial Vehicles ◽  
Horizontal Wind ◽  
Vertical Profiles ◽  
Aerial Vehicles ◽  
Wind Measurements ◽  
Quadrotor Unmanned Aerial Vehicles

Abstract. In this study, a fleet of quadrotor unmanned aerial vehicles (UAVs) is presented as a system to measure the spatial distribution of atmospheric boundary layer flow. The big advantage of this approach is that multiple and flexible measurement points in space can be sampled synchronously. The algorithm to obtain horizontal wind speed and direction is designed for hovering flight phases and is based on the principle of aerodynamic drag and the related quadrotor dynamics. During the FESST@MOL campaign at the boundary layer field site (Grenzschichtmessfeld, GM) Falkenberg of the Lindenberg Meteorological Observatory – Richard Assmann Observatory (MOL-RAO), 76 calibration and validation flights were performed. The 99 m tower equipped with cup and sonic anemometers at the site is used as the reference for the calibration of the wind measurements. The validation with an independent dataset against the tower anemometers reveals that an average accuracy of σrms<0.3 m s−1 for the wind speed and σrms,ψ<8∘ for the wind direction was achieved. Furthermore, we compare the spatial distribution of wind measurements with the fleet of quadrotors to the tower vertical profiles and Doppler wind lidar scans. We show that the observed shear in the vertical profiles matches well with the tower and the fluctuations on short timescales agree between the systems. Flow structures that appear in the time series of a line-of-sight measurement and a two-dimensional vertical scan of the lidar can be observed with the fleet of quadrotors and are even sampled with a higher resolution than the deployed lidar can provide.

Sign in / Sign up

Export Citation Format

Share Document