scholarly journals Physicochemical Properties andIn VitroCytotoxicity Studies of Chitosan as a Potential Carrier for Dicer-Substrate siRNA

2013 ◽  
Vol 2013 ◽  
pp. 1-10 ◽  
Author(s):  
Maria Abdul Ghafoor Raja ◽  
Haliza Katas ◽  
Zariyantey Abd Hamid ◽  
Nur Atiqah Razali
Keyword(s):  
Particle Size ◽  
Cost Effectiveness ◽  
Zeta Potential ◽  
Small Interfering Rna ◽  
Ionic Gelation ◽  
Rapid Degradation ◽  
The Mean ◽  
Afm Micrographs ◽  
Interfering Rna

Recently, Dicer-substrate small interfering RNA (DsiRNA) has gained attention owing to its greater potency over small interfering RNA (siRNA). However, the use of DsiRNA is restricted by its rapid degradationin vitro. To address this issue, chitosan nanoparticulate deliver yplatform for the Dicer-substrate siRNA (DsiRNA) was developed and characterized. Nanoparticles were prepared by simple complexation and ionic gelation methods. The mean particle size of DsiRNA-adsorbed chitosan nanospheres (DsiRNA-CS NPs) prepared by the ionic gelation method ranged from 225 to 335 nm, while simple complexation yielded DsiRNA-chitosan complexes (DsiRNA-CS complexes) ranging from 270 to 730 nm. The zeta potential of both types of nanoparticles ranged from +40 to +65 mV. TEM and AFM micrographs revealed spherical and irregular morphology of DsiRNA-CS NPs and DsiRNA-CS complexes. ATR-FTIR spectroscopy confirmed the presence of DsiRNA in the CS NPs/complexes. Both types of nanoparticles exhibited sustained release and high binding and encapsulation (100%) efficiency of DsiRNA. DsiRNA-CS NPs/complexes showed low, concentration-dependent cytotoxicityin vitro. DsiRNA-CS NPs showed better stability than the complexes when stored at 4 and 25°C. Thus, it is anticipated that CS NPs are promising vectors for DsiRNA delivery due to their stability, safety, and cost-effectiveness.

scholarly journals Preparation and Optimization of Chitosan-hEGF Nanoparticle Using Ionic Gelation Method Stabilized by Polyethylene Glycol (PEG) for Wound Healing Therapy

2020 ◽  
Vol 11 (1) ◽  
pp. 1220-1230
Author(s):  
Sriwidodo ◽  
Toto Subroto ◽  
Iman Permana Maksum ◽  
Anas Subarnas ◽  
Bethary Kesumawardhany ◽  
...  
Keyword(s):  
Particle Size ◽  
Polyethylene Glycol ◽  
Zeta Potential ◽  
Sodium Tripolyphosphate ◽  
Size Analysis ◽  
Ionic Gelation ◽  
Polyethylene Glycol 400 ◽  
Diabetic Ulcer ◽  
Diabetic Ulcers

The administration of human Epidermal Growth Factor (hEGF) for diabetic ulcer treatment has been known to have high effectiveness because hEGF has mitogenic properties and has been proved to increase epithelial cell proliferation both in vitro and in vivo. However, hEGF in environmental conditions of diabetic ulcers is known to have low stability, so it is necessary to repeat the administration or protect the hEGF using suitable preparation. This study aims to produce a new drug delivery system in the form of chitosan nanoparticle as a therapy for diabetic ulcers. The nanoparticle formulation was carried out by varying hEGF concentrations using the ionic gelation method with sodium tripolyphosphate (Na-TPP) as a crosslinker and Polyethylene glycol (PEG) as a stabilizer. Chitosan-hEGF nanoparticle formed were characterized using particle size analysis, polydispersity index, zeta potential, SEM and TEM, pH, and FTIR to observe the functional groups. Chitosan-hEGF nanoparticle-containing 0.1% chitosan, 0.15% sodium tripolyphosphate (Na-TPP), 2% polyethylene glycol 400 (PEG 400), and 75 ng/mL hEGF has the smallest particle size with an average of 600.6 nm and D90 value of 135.7 nm. Nanoparticle formed were relatively stable with zeta potential reaching +41,29. The results of in vitro testing showed that hEGF 50 ng/mL had an optimal cell viability percentage with a value of 192%.

Novel Formulation Development and Evaluation of Nanoparticles Based in Situ Gelling System for The Ophthalmic Delivery of Ciprofloxacin Hydrochloride

2015 ◽  
Vol 5 (4) ◽  
Author(s):  
Kranti Singh ◽  
Surajpal Verma ◽  
Shyam Prasad ◽  
Indu Bala
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Drug Loading ◽  
In Vitro Release ◽  
Formulation Development ◽  
Ciprofloxacin Hydrochloride ◽  
Potential Value ◽  
The Mean ◽  
In Situ Gelling

Ciprofloxacin hydrochloride loaded Eudragit RS100 nanoparticles were prepared by using w/o/w emulsification (multiple emulsification) solvent evaporation followed by drying of nanoparticles at 50°C. The nanoparticles were further incorporated into the pH-triggered in situ gel forming system which was prepared using Carbopol 940 in combination with HPMC as viscosifying agent. The developed nanoparticles was evaluated for particle size, zeta potential value and loading efficiency; nanoparticle incorporated in situ gelling system was evaluated for pH, clarity, gelling strength, rheological studies, in-vitro release studies and ex-vivo precorneal permeation studies. The nanopaticle showed the mean particle size varying between 263.5nm - 325.9 nm with the mean zeta potential value of -5.91 mV to -8.13 mV and drug loading capacity varied individually between 72.50% to 98.70% w/w. The formulation was clear with no suspended particles, showed good gelling properties. The gelling was quick and remained for longer time period. The developed formulation was therapeutically efficacious, stable and non-irritant. It provided the sustained release of drug over a period of 8-10 hours.

Formulation and Evaluation of Nanosuspension of Simvastatin

2015 ◽  
Vol 8 (2) ◽  
pp. 2858-2873
Author(s):  
Rupali L. Shid ◽  
Shashikant N. Dhole ◽  
Nilesh Kulkarni ◽  
Santosh L Shid
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Factorial Design ◽  
Dissolution Rate ◽  
In Vitro Dissolution ◽  
Total Drug ◽  
23 Factorial Design ◽  
Rate Of Dissolution

Poor water solubility and slow dissolution rate are issues for the majority of upcoming and existing biologically active compounds. Simvastatin is poorly water-soluble drug and its bioavailability is very low from its crystalline form. The purpose of this study wasto increase the solubility and dissolution rate of simvastatin by the  preparation of nanosuspension by emulsification solvent diffusion method at laboratory scale. Prepared nanosus-pension was evaluated for its particle size and in vitro dissolution study and characterized by zeta potential,differential scanning calorimetry (DSC) and X-Ray diffractometry (XRD), motic digital microscopy, entrapment efficiency, total drug content, saturated solubility study and in vivo study. A 23 factorial design was employed to study the effect of independent variables, amount of SLS (X1), amount of PVPK-30 (X2) and poloxamer-188 (X3) and dependent variables are total drug content and polydispersity Index. The obtained results showed that particle size (nm) and rate of dissolution has been improved when nanosuspension prepared with the higherconcentration of PVPK-30 with the higher concentration of PVP K-30 and Poloxamer-188 and lower concentration of SLS. The particle size and zeta potential of optimized formulation was found to be 258.3 nm and 23.43. The rate of dissolution of the optimized nanosuspension was enhanced (90% in 60min), relative to plain simvastatin  (21% in 60 min), mainly due to the formation of nanosized particles. These results indicate the suitability of 23 factorial  design for preparation of simvastatin loaded nano-suspension significantly improved in vitro dissolution rate and thus possibly enhance fast onset of therapeutic drug effect. In vivo study shows increase in bioavailability in nanosuspension formulation than the plain simvastatin drug.

Optimization and Characterization of Aqueous Micellar Formulations for Ocular Delivery of an Antifungal Drug, Posaconazole

2020 ◽  
Vol 26 (14) ◽  
pp. 1543-1555 ◽  
Author(s):  
Meltem E. Durgun ◽  
Emine Kahraman ◽  
Sevgi Güngör ◽  
Yıldız Özsoy
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Size Distribution ◽  
Encapsulation Efficiency ◽  
Fungal Infections ◽  
In Vitro Release ◽  
Pluronic F127 ◽  
Glycol Succinate ◽  
Vitro Release

Background: Topical therapy is preferred for the management of ocular fungal infections due to its superiorities which include overcoming potential systemic side effects risk of drugs, and targeting of drugs to the site of disease. However, the optimization of effective ocular formulations has always been a major challenge due to restrictions of ocular barriers and physiological conditions. Posaconazole, an antifungal and highly lipophilic agent with broad-spectrum, has been used topically as off-label in the treatment of ocular fungal infections due to its highly lipophilic character. Micellar carriers have the potential to improve the solubility of lipophilic drugs and, overcome ocular barriers. Objective: In the current study, it was aimed optimization of posaconazole loaded micellar formulations to improve aqueous solubility of posaconazole and to characterize the formulations and to investigate the physical stability of these formulations at room temperature (25°C, 60% RH), and accelerated stability (40°C, 75% RH) conditions. Method: Micelles were prepared using a thin-film hydration method. Pre-formulation studies were firstly performed to optimize polymer/surfactant type and to determine their concentration in the formulations. Then, particle size, size distribution, and zeta potential of the micellar formulations were measured by ZetaSizer Nano-ZS. The drug encapsulation efficiency of the micelles was quantified by HPLC. The morphology of the micelles was depicted by AFM. The stability of optimized micelles was evaluated in terms of particle size, size distribution, zeta potential, drug amount and pH for 180 days. In vitro release studies were performed using Franz diffusion cells. Results: Pre-formulation studies indicated that single D-ɑ-tocopheryl polyethylene glycol succinate (TPGS), a combination of it and Pluronic F127/Pluronic F68 are capable of formation of posaconazole loaded micelles at specific concentrations. Optimized micelles with high encapsulation efficiency were less than 20 nm, approximately neutral, stable, and in aspherical shape. Additionally, in vitro release data showed that the release of posaconazole from the micelles was higher than that of suspension. Conclusion: The results revealed that the optimized micellar formulation of posaconazole offers a potential approach for topical ocular administration.

Moxifloxacin Hydrochloride-Loaded Eudragit® RL 100 and Kollidon® SR Based Nanoparticles: Formulation, In vitro Characterization and Cytotoxicity.

2020 ◽  
Vol 23 ◽  
Author(s):  
Gülsel Yurtdaş Kırımlıoğlu ◽  
Sinan Özer ◽  
Gülay Büyükköroğlu ◽  
Yasemin Yazan
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Spray Drying ◽  
Prolonged Release ◽  
Ocular Delivery ◽  
Corneal Permeability ◽  
Release Pattern ◽  
In Vitro Characterization ◽  
Ocular Bioavailability

Background: Considering the low ocular bioavailability of conventional formulations used for ocular bacterial infection treatment, there’s a need for designing efficient novel drug delivery systems that may enhance of precorneal retention time and corneal permeability. Aim and Objective: The current research focuses on developing nanosized and non-toxic Eudragit® RL 100 and Kollidon® SR nanoparticles loaded with moxifloxacin hydrochloride (MOX) for its prolonged release to be promising for effective ocular delivery. Methods: In this study, MOX was incorporation was carried out by spray drying method aiming ocular delivery. In vitro characteristics were evaluated in detail with different methods. Results: MOX was successfully incorporated into Eudragit® RL 100 and Kollidon® SR polymeric nanoparticles by spray-drying process. Particle size, zeta potential, entrapment efficiency, particle morphology, thermal, FTIR, XRD and NMR analyses and MOX quantification using HPLC method were carried out to evaluate the nanoparticles prepared. MOX loaded nanoparticles demonstrated nanosized and spherical shape while in vitro release studies demonstrated modified release pattern which followed Korsmeyer-Peppas kinetic model. Following successful incorporation of MOX into the nanoparticles, the formulation (MOX: Eudragit® RL 100, 1:5) (ERL-MOX 2) was selected for further studies by the reason of its better characteristics like cationic zeta potential, smaller particle size, narrow size distribution and more uniform prolonged release pattern. Moreover, ERL-MOX 2 formulation remained stable for 3 months and demonstrated higher cell viability values for MOX. Conclusion: In vitro characterization analyses showed that non-toxic, nano-sized and cationic ERLMOX 2 formulation has the potential of enhancing ocular bioavailability.

In Vitro Estimation of Photo-Protective Potential of Pomegranate Seed Oil and Development of a Nanoformulation

2019 ◽  
Vol 15 (1) ◽  
pp. 87-102 ◽  
Author(s):  
Surbhi Dhawan ◽  
Sanju Nanda
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Seed Oil ◽  
Topical Delivery ◽  
Inflammatory Activity ◽  
Pomegranate Seed Oil ◽  
Protective Potential ◽  
Release Studies ◽  
Pomegranate Seed

Background: Since ancient times, people have been using natural resources for photoprotection purposes. One such highly recognised natural agent is pomegranate seed oil, considered as wonder oil owing to the presence of several beneficial phytoconstituents. </P><P> Objective: The study aimed to establish the photoprotective potential of pomegranate seed oil through various in vitro and biochemical studies along with the formation of nanoemulsion, an efficient topical delivery system for the oil. </P><P> Method: Photo-protective potential of the oil was estimated by determining in vitro antioxidant and anti-inflammatory activity, total phenolic content, anti elastase, antihyaluronidase and anticollagenase activities of the oil. Ultrasonication method was used to formulate nanoemulsions. The optimisation was done following the central composite design. The characterisation was done by particle size analysis, zeta potential, polydispersity index, pH, viscosity, stability testing and transmission electron microscopy. The optimised nanoemulsion was loaded into a gel base for topical application and further release studies were carried out. </P><P> Results: The IC50 values of anti-elastase, anti-collagenase and anti-hyaluronidase were found to be 309 mg/ml, 4 mg/ml and 95 mg/ml respectively. The results of anti-oxidant and anti-inflammatory activity were also significant, which thereby established the photo-protective potential of the oil. The optimum batch 2 had particle size 83.90 nm, 0.237 PDI and -5.37 mV zeta potential. The morphology was confirmed by TEM. Batch 2 was incorporated into a gel base and release studies showed 74.12 % release within 7 hours. </P><P> Conclusion: Pomegranate seed oil possesses a potential photo-protective ability. Nanoemulsions proved to be a promising carrier for the topical delivery of the oil.

scholarly journals FORMULATION AND CHARACTERIZATION OF TIMOLOL MALEATE-LOADED NANOPARTICLES GEL BY IONIC GELATION METHOD USING CHITOSAN AND SODIUM ALGINATE

2019 ◽  
pp. 48-54 ◽  
Author(s):  
RISA AHDYANI ◽  
LARAS NOVITASARI ◽  
RONNY MARTIEN
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Sodium Alginate ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Polydispersity Index ◽  
Ionic Gelation ◽  
Timolol Maleate ◽  
Optimum Formula

Objective: The objectives of this study were to formulate and characterize nanoparticles gel of timolol maleate (TM) by ionic gelation method using chitosan (CS) and sodium alginate (SA). Methods: Optimization was carried out by factorial design using Design Expert®10.0.1 software to obtain the concentration of CS, SA, and calcium chloride (CaCl2) to produce the optimum formula of TM nanoparticles. The optimum formula was characterized for particle size, polydispersity index, entrapment efficiency, Zeta potential, and molecular structure. Hydroxy Propyl Methyl Cellulose (HPMC) K15 was incorporated into optimum formula to form nanoparticles gel of TM and carried out in vivo release study using the Franz Diffusion Cell. Results: TM nanoparticles was successfully prepared with concentration of CS, SA, and CaCl2 of 0.01 % (w/v), 0.1 % (w/v), and 0.25 % (w/v), respectively. The particle size, polydispersity index, entrapment efficiency, and Zeta potential were found to be 200.47±4.20 nm, 0.27±0.0154, 35.23±4.55 %, and-5.68±1.80 mV, respectively. The result of FTIR spectra indicated TM-loaded in the nanoparticles system. In vitro release profile of TM-loaded nanoparticles gel showed controlled release and the Korsmeyer-Peppas model was found to be the best fit for drug release kinetics. Conclusion: TM-loaded CS/SA nanoparticles gel was successfully prepared and could be considered as a promising candidate for controlled TM delivery of infantile hemangioma treatment.

scholarly journals Muscle-specific microRNA miR-206 promotes muscle differentiation

2006 ◽  
Vol 174 (5) ◽  
pp. 677-687 ◽  
Author(s):  
Hak Kyun Kim ◽  
Yong Sun Lee ◽  
Umasundari Sivaprasad ◽  
Ankit Malhotra ◽  
Anindya Dutta
Keyword(s):  
Antisense Oligonucleotide ◽  
Small Interfering Rna ◽  
Degradation Process ◽  
Microrna Target ◽  
C2c12 Myoblasts ◽  
Target Sites ◽  
The Many ◽  
Interfering Rna ◽  
In Vitro Transfection

Three muscle-specific microRNAs, miR-206, -1, and -133, are induced during differentiation of C2C12 myoblasts in vitro. Transfection of miR-206 promotes differentiation despite the presence of serum, whereas inhibition of the microRNA by antisense oligonucleotide inhibits cell cycle withdrawal and differentiation, which are normally induced by serum deprivation. Among the many mRNAs that are down-regulated by miR-206, the p180 subunit of DNA polymerase α and three other genes are shown to be direct targets. Down-regulation of the polymerase inhibits DNA synthesis, an important component of the differentiation program. The direct targets are decreased by mRNA cleavage that is dependent on predicted microRNA target sites. Unlike small interfering RNA–directed cleavage, however, the 5′ ends of the cleavage fragments are distributed and not confined to the target sites, suggesting involvement of exonucleases in the degradation process. In addition, inhibitors of myogenic transcription factors, Id1-3 and MyoR, are decreased upon miR-206 introduction, suggesting the presence of additional mechanisms by which microRNAs enforce the differentiation program.

PRAMIPEXOLE DIHYDROCHLORIDE LOADED MPEGPCL NANOSUSPENSION BY MODIFIED NANOPRECIPITATION: IN VITRO AND IN VIVO EVALUATION

2016 ◽  
Vol 9 (6) ◽  
pp. 161
Author(s):  
Soma Sundaram
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Cell Viability ◽  
Neuronal Damage ◽  
Antioxidant Potential ◽  
Enzymatic Antioxidants ◽  
In Vivo Evaluation ◽  
Neuroprotective Effects ◽  
Pramipexole Dihydrochloride

AbstractAim and Objectives The present study was carried out to show the potential neuroprotective effects in both invitro and invivo pramipexole dihydrochloride nanosuspension for the treatment in Parkinson’s disease.Materials and Methods: Nanosuspension of pramipexole dihydrochloride was prepared with MPEG-PCL and Pluronic F68 by the process of modified nanoprecipitation technique with different concentrations of MPEG-PCL. The particle size, zeta potential, SEM, TEM and invitro dug release where performed. The cell viability study was performed by using SH-SY5Y cells. Further the formulation is evaluated for its antioxidant potential against rotenone induced neuronal damage in Wister rats such as enzymatic, non enzymatic antioxidants and histopathological evaluation.Result and Discussion: The nanoformulation shows least particle size of 143 nm and maximum zeta potential value 33.4 mv with 88.53% entrapment efficiency were observed with PMPNP 2 formulation. The SEM, TEM and invitro dug release of PMPNP 2 were shows spherical shape with controlled release when compared to other formulations. Further the MTT assay were performed by using SH-SY5Y cells which shows more than 50 % cell viability with 50 µl of PPMNP 2 nanoformulation. Further the antioxidant potential done in rotenone induced neuronal damage in Wister rats. The results showed elevation in the levels of enzymatic and non enzymatic antioxidants compared with neuronal toxic group. Further nanoformulation group showed decrease in levels of LPO which correlates with histopathological architecture.Conclusion: Our study concluded that nanoformulation showed better protective potential in both invitro and invivo compare to free drug for the treatment in Parkinson’s disease.Keywords: Pramipexoledihydrochloride; MPEG-PCL; SH-SY5Y cells; Nanoprecipitation; Parkinson’s disease.

Sign in / Sign up

Export Citation Format

Share Document