scholarly journals Synthesis of Catalysts and Its Application for Low-Temperature CO Oxidation

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
Der-Shing Lee ◽  
Yu-Wen Chen
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Co Oxidation ◽  
Fixed Bed ◽  
Fixed Bed Reactor ◽  
Narrow Particle Size Distribution ◽  
High Catalytic Activity ◽  
Incipient Wetness Impregnation ◽  
X Ray ◽  
Transmission Electron

A series of Au/-TiO2 with various Co/Ti ratios prepared. /TiO2 was prepared by incipient wetness impregnation with aqueous solution of cobalt nitrate. Au catalysts were prepared by deposition-precipitation (DP) method at pH 7 and 338 K. The catalysts were characterized by inductively coupled plasma-mass spectrometry, temperature programming reduction, X-ray diffraction, transmission electron microscopy, high-resolution transmission electron microscopy, and X-ray photoelectron spectroscopy. The reaction was carried out in a fixed bed reactor with a feed containing 1% CO in air at weight hourly space velocities of 120,000 mL/h g and 180,000 mL/h g. High gold dispersion and narrow particle size distribution were obtained by DP method. The addition of into Au/TiO2 enhanced the activity of CO oxidation significantly. Au/5%  -TiO2 had the highest catalyst among all the catalysts. was mainly in the form of nanosize Co3O4 which could stabilize the Au nanoparticles. donated partial electrons to Au. The interactions among Au, , and TiO2 account for the high catalytic activity for CO oxidation.

Synthesis and characterization of graphene oxide supported cobalt (II) tetrasulfophthalocyanine as an efficient heterogeneous nanocatalyst for mercaptans oxidation from gasoline

2017 ◽  
Vol 21 (07n08) ◽  
pp. 510-522 ◽  
Author(s):  
Kazem Motahari ◽  
Hojatollah Ahmadi
Keyword(s):  
Electron Microscopy ◽  
Graphene Oxide ◽  
Fixed Bed ◽  
Fixed Bed Reactor ◽  
Incipient Wetness Impregnation ◽  
X Ray ◽  
Fcc Gasoline ◽  
Ethyl Mercaptan ◽  
Vis Spectroscopy ◽  
Mercaptan Oxidation

In the present study, graphene oxide-supported cobalt (II) tetrasulfophthalocyanine (CoTsPc-GO) was synthesized using the incipient wetness impregnation assisted [Formula: see text]–[Formula: see text] assembling method. Applications for this material were investigated for ethyl mercaptan, [Formula: see text]-propyl mercaptan and [Formula: see text]-butyl mercaptan oxidation from fluid catalytic cracking (FCC) gasoline in a fixed bed reactor. The synthesized CoTsPc-GO catalysts were characterized using UV-vis spectroscopy, Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Raman spectroscopy analysis, field emission scanning electron microscopy (FESEM), energy dispersive X-ray (EDAX), thermogravimetric and differential thermal analysis (TGA-DTA), inductively coupled plasma optical emission spectroscopy (ICP-OES), and transmission electron microscopy (TEM). The effect of cobalt (II) tetrasulfophthalocyanine (CoTsPc) content (0–0.34 g), catalyst dosage (0.02–0.12 g) and temperature (30–40∘ C) on the performance of CoTsPc-GO catalysts were investigated during the Merox process. The stability and reusability of CoTsPc-GO catalyst for mercaptans oxidation were also tested. The obtained results revealed that the maximum mercaptan oxidation during the Merox process was obtained in CoTsPc-GO of 0.34 g, catalyst content of 0.1 g and a temperature of 40∘ C with ethyl mercaptan, [Formula: see text]-propyl mercaptan and [Formula: see text]-butyl mercaptan conversions of 99.9, 98.5 and 97.0%, respectively. The potential of CoTsPc-GO catalyst was investigated for further mercaptans oxidation. The results were compared to those obtained with an industrial impregnated active charcoal catalyst and a CoPc catalyst. The obtained results demonstrated the higher capability of CoTsPc-GO catalyst for mercaptans oxidation from FCC gasoline.

scholarly journals Catalytic Dry Reforming and Cracking of Ethylene for Carbon Nanofilaments and Hydrogen Production Using a Catalyst Derived from a Mining Residue

Catalysts ◽  
2019 ◽  
Vol 9 (12) ◽  
pp. 1069 ◽  
Author(s):  
Abir Azara ◽  
El-Hadi Benyoussef ◽  
Faroudja Mohellebi ◽  
Mostafa Chamoumi ◽  
François Gitzhofer ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Fixed Bed ◽  
Dry Reforming ◽  
Fixed Bed Reactor ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Spent Catalysts ◽  
Temperature Programmed

In this study, iron-rich mining residue (UGSO) was used as a support to prepare a new Ni-based catalyst via a solid-state reaction protocol. Ni-UGSO with different Ni weight percentages wt.% (5, 10, and 13) were tested for C2H4 dry reforming (DR) and catalytic cracking (CC) after activation with H2. The reactions were conducted in a differential fixed-bed reactor at 550–750 °C and standard atmospheric pressure, using 0.5 g of catalyst. Pure gases were fed at a molar ratio of C2H4/CO2 = 3 for the DR reaction and C2H4/Ar = 3 for the CC reaction. The flow rate is defined by a GHSV = 4800 mLSTP/h.gcat. The catalyst performance is evaluated by calculating the C2H4 conversion as well as carbon and H2 yields. All fresh, activated, and spent catalysts, as well as deposited carbon, were characterized by Brunauer–Emmett–Teller (BET), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectrometry (EDX), transmission electron microscopy (TEM), temperature programmed reduction (TPR), and thermogravimetric analysis (TGA). The results so far show that the highest carbon and H2 yields are obtained with Ni-UGSO 13% at 750 °C for the CC reaction and at 650 °C for the DR reaction. The deposited carbon was found to be filamentous and of various sizes (i.e., diameters and lengths). The analyses of the results show that iron is responsible for the growth of carbon nanofilaments (CNF) and nickel is responsible for the split of C–C bonds. In terms of conversion and yield efficiencies, the performance of the catalytic formulations tested is proven at least equivalent to other Ni-based catalyst performances described by the literature.

Phase Transformations in Ti-7w/oMo-3w/oMe Alloy

1974 ◽  
Vol 32 ◽  
pp. 514-515
Author(s):  
S. Fujishiro
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Transmission Electron Microscopy ◽  
Tensile Strength ◽  
Mechanical Processing ◽  
Ray Method ◽  
X Ray ◽  
Transmission Electron ◽  
Water Quench ◽  
Alpha Beta

The mechanical properties of three titanium alloys (Ti-7Mo-3Al, Ti-7Mo- 3Cu and Ti-7Mo-3Ta) were evaluated as function of: 1) Solutionizing in the beta field and aging, 2) Thermal Mechanical Processing in the beta field and aging, 3) Solutionizing in the alpha + beta field and aging. The samples were isothermally aged in the temperature range 300° to 700*C for 4 to 24 hours, followed by a water quench. Transmission electron microscopy and X-ray method were used to identify the phase formed. All three alloys solutionized at 1050°C (beta field) transformed to martensitic alpha (alpha prime) upon being water quenched. Despite this heavily strained alpha prime, which is characterized by microtwins the tensile strength of the as-quenched alloys is relatively low and the elongation is as high as 30%.

A High Resolution Study of G.P. Zones in Aluminum - 4.2 at % Silver

1982 ◽  
Vol 40 ◽  
pp. 722-723 ◽  
Author(s):  
R. Gronsky
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
High Resolution ◽  
Computer Simulations ◽  
Structural Characteristics ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Resolution Study

The phenomenon of clustering in Al-Ag alloys has been extensively studied since the early work of Guinierl, wherein the pre-precipitation state was characterized as an assembly of spherical, ordered, silver-rich G.P. zones. Subsequent x-ray and TEM investigations yielded results in general agreement with this model. However, serious discrepancies were later revealed by the detailed x-ray diffraction - based computer simulations of Gragg and Cohen, i.e., the silver-rich clusters were instead octahedral in shape and fully disordered, atleast below 170°C. The object of the present investigation is to examine directly the structural characteristics of G.P. zones in Al-Ag by high resolution transmission electron microscopy.

Magnesium and sulfur in mast cell and basophil granules of lower vertebrates in relation with histamine

1992 ◽  
Vol 50 (2) ◽  
pp. 1596-1597
Author(s):  
Kenichi Takaya
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Mast Cell ◽  
Mast Cells ◽  
Tree Frog ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Fresh Frozen ◽  
Ultrathin Sections

Mast cell and basophil granules of the vertebrate contain heparin or related sulfated proteoglycans. Histamine is also present in mammalian mast cells and basophils. However, no histamine is detected in mast cell granules of the amphibian or fish, while it is shown in those of reptiles and birds A quantitative x-ray microanalysis of mast cell granules of fresh frozen dried ultrathin sections of the tongue of Wistar rats and tree frogs disclosed high concentrations of sulfur in rat mast cell granules and those of sulfur and magnesium in the tree frog granules. Their concentrations in tree frog mast cell granules were closely correlated (r=0.94).Fresh frozen dried ultrathin sections and fresh air-dried prints of the tree frog tongue and spleen and young red-eared turtle (ca. 6 g) spleen and heart blood were examined by a quantitative energy-dispersive x-ray microanalysis (X-650, Kevex-7000) for the element constituents of the granules of mast cells and basophils. The specimens were observed by transmission electron microscopy (TEM) (80-200 kV) and followed by scanning transmission electron microscopy (STEM) under an analytical electron microscope (X-650) at an acceleration voltage of 40 kV and a specimen current of 0.2 nA. A spot analysis was performed in a STEM mode for 100 s at a specimen current of 2 nA on the mast cell and basophil granules and other areas of the cells. Histamine was examined by the o-phthalaldehyde method.

scholarly journals Quartz Crystallite Size and Moganite Content as Indicators of the Mineralogical Maturity of the Carboniferous Chert: The Case of Cherts from Eastern Asturias (Spain)

Minerals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 611
Author(s):  
Celia Marcos ◽  
María de Uribe-Zorita ◽  
Pedro Álvarez-Lloret ◽  
Alaa Adawy ◽  
Patricia Fernández ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Crystallite Size ◽  
Archaeological Sites ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Infrared And Raman Spectroscopy ◽  
First Time ◽  
Geological Formations

Chert samples from different coastal and inland outcrops in the Eastern Asturias (Spain) were mineralogically investigated for the first time for archaeological purposes. X-ray diffraction, X-ray fluorescence, transmission electron microscopy, infrared and Raman spectroscopy and total organic carbon techniques were used. The low content of moganite, since its detection by X-ray diffraction is practically imperceptible, and the crystallite size (over 1000 Å) of the quartz in these cherts would be indicative of its maturity and could potentially be used for dating chert-tools recovered from archaeological sites. Also, this information can constitute essential data to differentiate the cherts and compare them with those used in archaeological tools. However, neither composition nor crystallite size would allow distinguishing between coastal and inland chert outcrops belonging to the same geological formations.

scholarly journals Revisiting the Bøggild Intergrowth in Iridescent Labradorite Feldspars: Ordering, Kinetics, and Phase Equilibria

Minerals ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 727
Author(s):  
Shiyun Jin ◽  
Huifang Xu ◽  
Seungyeol Lee
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Atom Probe ◽  
Phase Region ◽  
Two Phase ◽  
Subsolidus Phase ◽  
Plagioclase Feldspar ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Transmission

The enigmatic Bøggild intergrowth in iridescent labradorite crystals was revisited in light of recent work on the incommensurately modulated structures in the intermediated plagioclase. Five igneous samples and one metamorphic labradorite sample with various compositions and lamellar thicknesses were studied in this paper. The lamellar textures were characterized with conventional transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM). The compositions of individual lamellae were analyzed with high-resolution energy-dispersive X-ray spectroscopy (EDS) mapping and atom probe tomography (APT). The average structure states of the studied samples were also compared with single-crystal X-ray diffraction data (SC-XRD). The Na-rich lamellae have a composition of An44–48, and the Ca-rich lamellae range from An56 to An63. Significant differences between the lamellar compositions of different samples were observed. The compositions of the Bøggild intergrowth do not only depend on the bulk compositions, but also on the thermal history of the host rock. The implications on the subsolidus phase relationships of the plagioclase feldspar solid solution are discussed. The results cannot be explained by a regular symmetrical solvus such as the Bøggild gap, but they support an inclined two-phase region that closes at low temperature.

Multi-scale Investigation of Heterogeneous Swift Heavy Ion Tracks in Stannate Pyrochlore

2021 ◽  
Author(s):  
Eric O'Quinn ◽  
Cameron Tracy ◽  
William F. Cureton ◽  
Ritesh Sachan ◽  
Joerg C. Neuefeind ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Heavy Ion ◽  
X Ray Diffraction ◽  
X Ray ◽  
Structural Modifications ◽  
Multi Scale ◽  
Ion Tracks ◽  
Swift Heavy Ion ◽  
Transmission Electron

Er2Sn2O7 pyrochlore was irradiated with swift heavy Au ions (2.2 GeV), and the induced structural modifications were systematically examined using complementary characterization techniques including transmission electron microscopy (TEM), X-ray diffraction...

scholarly journals Synchrotron Radiation Spectroscopy and Transmission Electron Microscopy Techniques to Evaluate TiO2 NPs Incorporation, Speciation, and Impact on Root Cells Ultrastructure of Pisum sativum L. Plants

Nanomaterials ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 921
Author(s):  
Simonetta Muccifora ◽  
Hiram Castillo-Michel ◽  
Francesco Barbieri ◽  
Lorenza Bellani ◽  
Monica Ruffini Castiglione ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Synchrotron Radiation ◽  
Pisum Sativum ◽  
Emission Spectrometry ◽  
Root Cells ◽  
Tio2 Nps ◽  
X Ray ◽  
Pisum Sativum L ◽  
Transmission Electron

Biosolids (Bs) for use in agriculture are an important way for introducing and transferring TiO2 nanoparticles (NPs) to plants and food chain. Roots of Pisum sativum L. plants grown in Bs-amended soils spiked with TiO2 800 mg/kg as rutile NPs, anatase NPs, mixture of both NPs and submicron particles (SMPs) were investigated by Transmission Electron Microscopy (TEM), synchrotron radiation based micro X-ray Fluorescence and micro X-ray Absorption Near-Edge Structure (µXRF/µXANES) and Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES). TEM analysis showed damages in cells ultrastructure of all treated samples, although a more evident effect was observed with single anatase or rutile NPs treatments. Micro-XRF and TEM evidenced the presence of nano and SMPs mainly in the cortex cells near the rhizodermis. Micro-XRF/micro-XANES analysis revealed anatase, rutile, and ilmenite as the main TiO2 polymorphs in the original soil and Bs, and the preferential anatase uptake by the roots. For all treatments Ti concentration in the roots increased by 38–56%, however plants translocation factor (TF) increased mostly with NPs treatment (261–315%) and less with SMPs (about 85%), with respect to control. In addition, all samples showed a limited transfer of TiO2 to the shoots (very low TF value). These findings evidenced a potential toxicity of TiO2 NPs present in Bs and accumulating in soil, suggesting the necessity of appropriate regulations for the occurrence of NPs in Bs used in agriculture.

Sign in / Sign up

Export Citation Format

Share Document