scholarly journals Preparation, Physicochemical Characterization, and Bioactivity Evaluation of Strontium-Containing Glass Ionomer Cement

ISRN Ceramics ◽  
2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
Masomeh Khaghani ◽  
Ali Doostmohammadi ◽  
Zahra Golniya ◽  
Ahmad Monshi ◽  
Ahmad Reza Arefpour
Keyword(s):  
Electron Microscope ◽  
Body Fluid ◽  
Glass Ionomer Cement ◽  
Xrd Analysis ◽  
Glass Ionomer Cements ◽  
Glass Ionomer ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ionomer Cement ◽  
Scanning Electron

Background. Glass ionomer cements are one of the most important restorative materials in dentistry. One of the disadvantages of glass ionomer cements is their undesirable mechanical properties and bioactivity. Aim. The aim of this work was preparation and characterization of strontium-containing glass ionomer cement and evaluation of its bioactivity in the simulated body fluid. Materials and Methods. The ceramic component of glass ionomer cement was made by melting method. Scanning electron microscope (SEM) was used to study the size and the shape of glass particles. In order to determine the phase combination in the produced material, X-ray diffraction (XRD) analysis was carried out. The chemical composition of the glass was evaluated by X-ray florescence (XRF), and the surface area of the particles was determined using BET method. In order to investigate the biological properties of the glass, samples were immersed in simulated body fluid (SBF). Fourier transform infrared spectroscopy (FTIR) and scanning electron microscope (SEM) were used to recognize and confirm the apatite layer on the composite surface. Results and Conclusions. The result of X-ray diffraction (XRD) analysis confirmed the glassy structure of the produced ionomer cements. The result of XRF confirmed the presence of Sr in the chemical composition. Fourier transform infrared spectroscopy test and electron microscope confirmed the formation of apatite layer on the surface of material. The final result of this research was gaining glass ionomer cement containing Sr with improved bioactivity.

Glass Ionomer Cement – Development and Characterization Microstructural

2014 ◽  
Vol 805 ◽  
pp. 12-18
Author(s):  
Waldênia P. Freire ◽  
Marcus Vinícius Lia Fook ◽  
Emilly F. Barbosa ◽  
Camila S. Araújo ◽  
Rossemberg C. Barbosa ◽  
...  
Keyword(s):  
Glass Ionomer Cement ◽  
Homogeneous Distribution ◽  
Control Group ◽  
Bone Cements ◽  
Glass Ionomer ◽  
X Ray Diffraction ◽  
X Ray ◽  
Luting Agent ◽  
Diffraction Patterns ◽  
Ionomer Cement

The Glass Ionomers Cements (GICs) are materials widely used in dentistry, have advantages such as fluoride release and chemical adhesion to the dental substrate. They are recommended as a restorative material, luting agent in prosthetic dentistry and also in medicine. However, there is need for developing new bone cements as an alternative or replacement to the current polymethylmethacrylate cements, therefore, the objective of this research was to develop an experimental GIC and characterization regarding morphology, chemical composition and crystallinity. This composite was characterized by X-ray diffraction (XRD), Infrared Spectroscopy Fourier Transform (FTIR) and optical microscopy (OM). For comparative study, was used the GIC Vidrion R (SS White) in the control group. These cements are presented in semi-crystalline diffraction patterns, the FTIR spectra observed characteristic bands of these materials and microstructural study of the cements showed homogeneous distribution of filler in the polymer matrix, corroborating with the literature.

ENHANCED CALCIUM PHOSPHATE PRECIPITATION ON THE SURFACE OF Mg-ION-IMPLANTED ZrO2 BIOCERAMIC

2007 ◽  
Vol 14 (01) ◽  
pp. 71-77 ◽  
Author(s):  
H. LIANG ◽  
Y. HUANG ◽  
F. HE ◽  
H. F. DING ◽  
Y. Z. WAN
Keyword(s):  
Fourier Transform ◽  
Infrared Spectroscopy ◽  
Electron Microscope ◽  
Calcium Phosphate ◽  
Body Fluid ◽  
X Ray Diffraction ◽  
X Ray ◽  
Calcium Phosphate Precipitation ◽  
Scanning Electron ◽  
Ion Implanted

Modification of bioceramics by ion implantation of magnesium ( Mg ) is of interest as Mg is the fourth abundant cation in the human body. In this work, magnesium was ion-implanted into a ZrO 2 based bioceramic stabilized with Y 2 O 3 and Al 2 O 3. Both Mg -implanted and unimplanted samples were soaked in a simulated body fluid (SBF) for a period of time. The deposits on the surface of various samples were characterized with scanning electron microscope (SEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). We find that the Mg -implanted ZrO 2 shows better bioactivity than the plain bioceramic. These results indicate that Mg -implantation can improve the bioactivity of the ZrO 2 based bioceramic. Mechanisms governing the improvement are discussed in this paper.

The Effect of CaCO3 Addition on Physical Properties of ZnO-Based Crystal Glaze

2012 ◽  
Vol 620 ◽  
pp. 12-16 ◽  
Author(s):  
Abdul Rashid Jamaludin ◽  
Shah Rizal Kasim ◽  
Zainal Arifin Ahmad
Keyword(s):  
Electron Microscope ◽  
Calcium Carbonate ◽  
Scanning Electron Microscope ◽  
Physical Properties ◽  
Crystallization Temperature ◽  
Xrd Analysis ◽  
Sem Analysis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scanning Electron

The effects of calcium carbonate (CaCO3) addition on the physical properties of ZnO-based crystal glaze batches were investigated. Samples were fired at different gloss firing temperatures ranging from 1180-1220°C with 3 hours soaking at 1060°C crystallization temperature. X-ray diffraction (XRD) analysis identifiedthe crystal phase occurred as willemite (Zn2SiO4) and the scanning electron microscope (SEM) analysis indicated that willemite crystals are in the acicular needle like shape that formed spherulite. The intensities of willemite peaks decreased with CaCO3 addition and completely vanished at 5.0 wt% CaCO3. Varied formation of spherulites developed of the surface of crystal glaze as the flows of the glaze stretched further as the amount of CaCO3 increased.

Characterization of the Specificity in Three Commercial Dental Ceramic Powders

2017 ◽  
Vol 68 (4) ◽  
pp. 707-710
Author(s):  
Horia Manolea ◽  
Mirela Opri ◽  
Nicoleta Cioatera ◽  
Adriana Voinea ◽  
Radu Rica ◽  
...  
Keyword(s):  
Electron Microscope ◽  
High Resolution ◽  
Sintered Material ◽  
Xrd Analysis ◽  
Dental Ceramics ◽  
X Ray Diffraction ◽  
Ceramic Powders ◽  
X Ray ◽  
Scanning Electron

The aim of this study was to present and discuss the characteristics of three ceramic powders as well as the sintered material from the three commercial dental ceramics produced by Vita Zahnfabrik, Germany (VM13 and VMK Master, used for veneering metal frameworks, respectivelly VM9 used for veneering zirconia frameworks). An X-ray diffraction (XRD) analysis was performed, Raman spectra were recorded and the morphology of the samples was evidenced by using a high resolution scanning electron microscope, equipped with an EDXS detector. The results of this study corroborated with the presented literature data helps practitioners to better understand the interaction of these biomaterials with oral tissues, and, also helps researchers to modify the properties of ceramics for a better integration in the intraoral condition.

EFFECT OF EXCESS BISMUTH ON THE SYNTHESIS OF BISMUTH SILICATE (Bi4Si3O12) POLYCRYSTALS

2009 ◽  
Vol 23 (08) ◽  
pp. 2093-2099 ◽  
Author(s):  
J. KAEWKHAO ◽  
N. UDOMKAN ◽  
W. CHEWPRADITKUL ◽  
P. LIMSUWAN
Keyword(s):  
Crystal Structure ◽  
Grain Size ◽  
Electron Microscope ◽  
Xrd Analysis ◽  
X Ray Diffraction ◽  
Bismuth Silicate ◽  
X Ray ◽  
Structure And Morphology ◽  
Crystallization Morphology ◽  
Scanning Electron

In this study, the effect of bismuth content on the crystal structure and morphology of bismuth silicate ( BSO:Bi 4 Si 3 O 12) polycrystals were investigated with X-ray diffraction (XRD) analysis and scanning electron microscope (SEM). BSO materials have been successfully prepared by the solid-state reaction. The BSO phase was crystallized at 950°C for 12 h. In summary, 10% of excess bismuth was found to be the optimum composition with respect to crystallization, morphology, and grain size.

The Characteristic of Surface Layers on Austenitic Stainless Steel after Glow-Discharge Nitriding Process

2010 ◽  
Vol 165 ◽  
pp. 165-168 ◽  
Author(s):  
Artur Sitko ◽  
Marek Szkodo ◽  
Maria Gazda
Keyword(s):  
Stainless Steel ◽  
Electron Microscope ◽  
Austenitic Stainless Steel ◽  
Xrd Analysis ◽  
X Ray Diffraction ◽  
Surface Layers ◽  
X Ray ◽  
Diffusion Layers ◽  
Chemical Constitution ◽  
Scanning Electron

This paper presents investigation of surface layers. The diffusion layers were produced by using different parameters of reactive atmosphere (N2:H2). The research of the surface layers was performed using scanning electron microscope (SEM). The results of energy dispersive X-ray (EDX) analysis and X-ray diffraction (XRD) analysis are presented. Research reveals the influence of chemical constitution of reactive atmosphere on the change of properties of nitrided layers.

CuO Microspheres Synthesized via the Easy Hydrothermal Method

2012 ◽  
Vol 159 ◽  
pp. 84-87
Author(s):  
Xiao Ming Fu
Keyword(s):  
Electron Microscope ◽  
Reaction Time ◽  
Scanning Electron Microscope ◽  
Hydrothermal Method ◽  
Xrd Analysis ◽  
Sem Analysis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Cuo Microspheres ◽  
Scanning Electron

CuO microspheres are successfully synthesized with CuCl2 as copper source and Na2CO3 as auxiliary salt at 240 °C for 24 h via the easy hydrothermal method. The phase and the morphologies of the samples have been characterized and analyzed by XRD (X-ray diffraction) and SEM (Scanning electron microscope), respectively. XRD analysis shows that the phase of as obtained samples is CuO. SEM analysis confirms that the increase of the reaction time, the reaction temperature and the auxiliary salt is propitious to synthesize CuO microspheres.

Study of the mechanism for controlled crystallization of BaF2 under two kinds of monolayers

2001 ◽  
Vol 16 (8) ◽  
pp. 2415-2420 ◽  
Author(s):  
L. Lu ◽  
H. Cui ◽  
W. Li ◽  
H. Zhang ◽  
S. Xi
Keyword(s):  
Electron Microscope ◽  
Specific Interaction ◽  
Xrd Analysis ◽  
X Ray Diffraction ◽  
Degree Of Ionization ◽  
Detailed Mechanism ◽  
X Ray ◽  
Lattice Matching ◽  
Controlled Crystallization ◽  
Scanning Electron

Controlled crystallization of BaF2 under two different kinds of monolayers, octadecylamine [CH3(CH2)17NH2] and hexadecanol [CH3(CH2)14CH2OH], has been studied by using x-ray diffraction (XRD) and scanning electron microscope. It was found that the monolayer headgroup, the degree of ionization of the headgroup, etc., had a complicated effect on the selectivity of monolayers for crystal and on the morphology and orientation of crystals grown under the compressed monolayers. At pH = 7.0, XRD analysis showed that (100)-oriented BaF2 crystals were formed under the octadecylamine monolayer, while several kinds of crystals were found under the hexadecanol monolayer. In comparison, at pH = 8.5, both (100)-oriented BaF2 and (111)-oriented Ba(NO3)2 crystals were obtained under the monolayer of octadecylamine. However, crystals formed under hexadecanol monolayer consist of BaF2, Ba(NO3)2, etc. The detailed mechanism for crystallization was discussed in terms of the specific interaction and lattice matching between the monolayer headgroup and the nucleating species.

Sign in / Sign up

Export Citation Format

Share Document