scholarly journals The Effect of Heat Transfer on MHD Marangoni Boundary Layer Flow Past a Flat Plate in Nanofluid

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
D. R. V. S. R. K. Sastry ◽  
A. S. N. Murti ◽  
T. Poorna Kantha
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Differential Equations ◽  
Boundary Layer Flow ◽  
Numerical Solutions ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Convection Boundary Layer ◽  
Similarity Transformations ◽  
Layer Flow

The problem of heat transfer on the Marangoni convection boundary layer flow in an electrically conducting nanofluid is studied. Similarity transformations are used to transform the set of governing partial differential equations of the flow into a set of nonlinear ordinary differential equations. Numerical solutions of the similarity equations are then solved through the MATLAB “bvp4c” function. Different nanoparticles like Cu, Al2O3, and TiO2 are taken into consideration with water as base fluid. The velocity and temperature profiles are shown in graphs. Also the effects of the Prandtl number and solid volume fraction on heat transfer are discussed.

scholarly journals Similarity Solution of Marangoni Convection Boundary Layer Flow over a Flat Surface in a Nanofluid

2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
Norihan Md. Arifin ◽  
Roslinda Nazar ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Differential Equations ◽  
Boundary Layer Flow ◽  
Numerical Solutions ◽  
Volume Fraction ◽  
Convection Boundary Layer ◽  
Flow And Heat Transfer ◽  
Different Types ◽  
Layer Flow

The problem of steady Marangoni boundary layer flow and heat transfer over a flat plate in a nanofluid is studied using different types of nanoparticles. The general governing partial differential equations are transformed into a set of two nonlinear ordinary differential equations using unique similarity transformation. Numerical solutions of the similarity equations are obtained using the Runge-Kutta-Fehlberg (RKF) method. Three different types of nanoparticles are considered, namely, Cu, Al2O3, and TiO2, by using water as a base fluid with Prandtl numberPr=6.2. The effects of the nanoparticle volume fractionϕand the constant exponentmon the flow and heat transfer characteristics are obtained and discussed.

scholarly journals Marangoni Mixed Convection Boundary Layer Flow in a Nanofluid

2014 ◽  
Vol 9 (2) ◽  
Author(s):  
Amirah Remeli ◽  
Norihan Md Arifin ◽  
Roslinda Nazar ◽  
Fudziah Ismail
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Mixed Convection ◽  
Boundary Layer Flow ◽  
Numerical Solutions ◽  
Volume Fraction ◽  
Immiscible Fluids ◽  
Convection Boundary Layer ◽  
Convection Boundary ◽  
Layer Flow

The problem of Marangoni mixed convection boundary layer flow and heat transfer that can be formed along the interface of two immiscible fluids in a nanofluid is studied using different types of nanoparticles. Numerical solutions of the similarity equations are obtained using the shooting method. Three types of metallic or nonmetallic nanoparticles, namely copper (Cu), alumina (23AlO) and titania (2TiO) are consideredby using a water-based fluid to investigate the effect of the solid volume fraction or nanoparticle volume fraction parameter ϕ of the nanofluid. The influences of the interest parameters on the reduced velocity along the interface, velocity profiles as well as the reduced heat transfer at the interface and temperature profiles were presented in tables and figures.

Forced Convection Boundary Layer Flow Past Nonisothermal Thin Needles in Nanofluids

2011 ◽  
Vol 133 (5) ◽  
Author(s):  
T. Grosan ◽  
I. Pop
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Boundary Layer Flow ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Convection Boundary Layer ◽  
Heat Transfer Characteristics ◽  
Flow And Heat Transfer ◽  
Convection Boundary ◽  
Layer Flow

The classical problem of forced convection boundary layer flow and heat transfer past a needle with variable wall temperature using nanofluids is theoretically studied. The similarity equations are solved numerically for two types of metallic or nonmetallic, such as copper (Cu) and alumina (Al2O3) nanoparticles in the based fluid of water with the Prandtl number Pr=7 to investigate the effect of the solid volume fraction parameter ϕ of the fluid and heat transfer characteristics. The skin friction coefficient, Nusselt number, and the velocity and temperature profiles are presented and discussed. It is found that the solid volume fraction affects the fluid flow and heat transfer characteristics.

scholarly journals Slip Effects on Boundary Layer Flow and Heat Transfer Along a Stretching Cylinder

2013 ◽  
Vol 18 (2) ◽  
pp. 447-459 ◽  
Author(s):  
S. Mukhopadhyay ◽  
R.S.R Gorla
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Differential Equations ◽  
Boundary Layer Flow ◽  
Numerical Solutions ◽  
Velocity Slip ◽  
Heat Equations ◽  
Stretching Cylinder ◽  
Linear Ordinary Differential Equations ◽  
Layer Flow

An axi-symmetric laminar boundary layer flow of a viscous incompressible fluid and heat transfer towards a stretching cylinder is presented. Velocity slip is considered instead of the no-slip condition at the boundary. Similarity transformations are used to convert the partial differential equations corresponding to the momentum and heat equations into non-linear ordinary differential equations. Numerical solutions of these equations are obtained by the shooting method. It is found that the velocity decreases with increasing the slip parameter. The skin friction as well as the heat transfer rate at the surface is larger for a cylinder compared to those for a flat plate.

scholarly journals Dual Solutions in the Boundary Layer Flow and Heat Transfer in the Presence of Thermal Radiation with Suction Effect

2018 ◽  
Vol 7 (4.33) ◽  
pp. 17
Author(s):  
Siti Nur Aisyah Azeman ◽  
. .
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Differential Equations ◽  
Thermal Radiation ◽  
Boundary Layer Flow ◽  
Numerical Solutions ◽  
Dual Solutions ◽  
Shooting Technique ◽  
Flow And Heat Transfer ◽  
Layer Flow

The dual solutions in the boundary layer flow and heat transfer in the presence of thermal radiation is quantitatively studied. The governing partial differential equations are derived into a system of ordinary differential equations using a similarity transformation, and afterward numerical solution obtained by a shooting technique. Dual solutions execute within a certain range of opposing and assisting flow which related to these numerical solutions. The similarity equations have two branches, upper or lower branch solutions, within a certain range of the mixed convection parameters. Further numerical results exist in our observations which enable to discuss the features of the respective solutions.  

scholarly journals Numerical investigation of mixed convection boundary layer flow for nanofluids under quasilinearization technique

2021 ◽  
Vol 3 (11) ◽  
Author(s):  
Srimanta Maji ◽  
Akshaya K. Sahu
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Differential Equations ◽  
Mixed Convection ◽  
Boundary Layer Flow ◽  
Dual Solutions ◽  
Nonlinear Pdes ◽  
Convection Boundary Layer ◽  
Physical Parameters ◽  
Layer Flow

AbstractThe study of boundary layer flow under mixed convection has been investigated numerically for various nanofluids over a semi-infinite flat plate which has been placed vertically upward for both buoyancy-induced assisting and buoyancy-induced opposing flow cases. To facilitate numerical calculations, a suitable transformation has been made for the governing partial differential equations (PDEs). Then, similarity method has been applied locally to approximate the nonlinear PDEs into a coupled nonlinear ordinary differential equations (ODEs). Then, quasilinearization method has been taken for linearizing the nonlinear terms which are present in the governing equations. Thereafter, implicit trapezoidal rule has been taken for integration numerically along with principle of superposition. The effect of physical parameters which are involved in the study are analyzed on the flow and heat transfer characteristics. This study reveals the presence of dual solutions in case of opposing flow. Further, this study shows that with increasing $$\phi$$ ϕ and Pr, the range of existence of dual solutions becomes wider. Also, it has been noted that nanofluids enhance the process of heat transfer for buoyancy assisting flow and it delays the separation point in case of opposing flow.

Mixed Convection in Viscoelastic Boundary Layer Flow and Heat Transfer Over a Stretching Sheet

2014 ◽  
Vol 6 (3) ◽  
pp. 359-375 ◽  
Author(s):  
Antonio Mastroberardino
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Differential Equations ◽  
Mixed Convection ◽  
Boundary Layer Flow ◽  
Skin Friction Coefficient ◽  
Convection Boundary Layer ◽  
Electrically Conducting ◽  
Homotopy Analysis ◽  
Layer Flow

AbstractAn investigation is carried out on mixed convection boundary layer flow of an incompressible and electrically conducting viscoelastic fluid over a linearly stretching surface in which the heat transfer includes the effects of viscous dissipation, elastic deformation, thermal radiation, and non-uniform heat source/sink for two general types of non-isothermal boundary conditions. The governing partial differential equations for the fluid flow and temperature are reduced to a nonlinear system of ordinary differential equations which are solved analytically using the homotopy analysis method (HAM). Graphical and numerical demonstrations of the convergence of the HAM solutions are provided, and the effects of various parameters on the skin friction coefficient and wall heat transfer are tabulated. In addition it is demonstrated that previously reported solutions of the thermal energy equation given in [1] do not converge at the boundary, and therefore, the boundary derivatives reported are not correct.

Mixed convection boundary layer flow along vertical thin needles in nanofluids

2014 ◽  
Vol 24 (3) ◽  
pp. 579-594 ◽  
Author(s):  
Radu Trimbitas ◽  
Teodor Grosan ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Convection Boundary Layer ◽  
Heat Transfer Characteristics ◽  
Content Type ◽  
Flow And Heat Transfer ◽  
Convection Boundary ◽  
Layer Flow

Purpose – The purpose of this paper is to theoretically study the problem of mixed convection boundary layer flow and heat transfer past a vertical needle with variable wall temperature using nanofluids. The similarity equations are solved numerically for copper nanoparticles in the based fluid of water to investigate the effect of the solid volume fraction parameter of the fluid and heat transfer characteristics. The skin friction coefficient, Nusselt number, and the velocity and temperature profiles and are graphically presented and discussed. Design/methodology/approach – The transformed system of ordinary differential equations was solved using the function bvp4c from Matlab. The relative tolerance was set to 1e-10. For the study of the stability the authors also used the bvp4c function in combination with chebfun package from Matlab. Findings – It is found that the solid volume fraction affects the fluid flow and heat transfer characteristics. The numerical results for a regular fluid and forced convection flow are compared with the corresponding results reported by Chen and Smith. The solutions exists up to a critical value of λ, beyond which the boundary layer separates from the surface and the solution based upon the boundary-layer approximations is not possible Originality/value – The paper describes how multiple (dual) solutions for the flow reversals are obtained. A stability analysis for this flow reversal has been also done showing that the lower solution branches are unstable, while the upper solution branches are stable.

scholarly journals Analysis of Boundary Layer Flow and Heat Transfer along a Stretching Cylinder in a Porous Medium

2012 ◽  
Vol 2012 ◽  
pp. 1-7 ◽  
Author(s):  
Swati Mukhopadhyay
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Porous Medium ◽  
Differential Equations ◽  
Boundary Layer Flow ◽  
Numerical Solutions ◽  
Heat Equations ◽  
Stretching Cylinder ◽  
Highly Nonlinear ◽  
Layer Flow

This paper presents an axi-symmetric laminar boundary layer flow of a viscous incompressible fluid and heat transfer towards a stretching cylinder embedded in a porous medium. The partial differential equations corresponding to the momentum and heat equations are converted into highly nonlinear ordinary differential equations with the help of similarity transformations. Numerical solutions of these equations are obtained by shooting method. It is found that the velocity decreases with increasing permeability parameter. The skin friction as well as the heat transfer rate at the surface is larger for a cylinder compared to a flat plate.

Linear Stability on the Local Thermal Nonequilibrium Model of Mixed Convection Boundary Layer Flow over a Moving Wedge in a Porous Medium: Viscous Dissipation and Radiation Effects

2021 ◽  
Vol 143 (4) ◽  
Author(s):  
Shashi Prabha Gogate S. ◽  
Bharathi M. C. ◽  
Ramesh B. Kudenatti
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Porous Medium ◽  
Differential Equations ◽  
Mixed Convection ◽  
Viscous Dissipation ◽  
Boundary Layer Flow ◽  
Convection Boundary Layer ◽  
Convection Boundary ◽  
Layer Flow

Abstract This paper studies the local thermal nonequilibrium (LTNE) model for two-dimensional mixed convection boundary-layer flow over a wedge, which is embedded in a porous medium in the presence of radiation and viscous dissipation. It is considered that the temperature of the fluid and solid phases is not identical; hence, we require two energy equations: one for each phase. The motion of the mainstream and wedge is approximated by the power of distance from the leading boundary layer. The flow and heat transfer in the LTNE phase is governed by the coupled partial differential equations, which are then reduced to nonlinear ordinary differential equations via suitable similarity transformations. Numerical simulations show that when the interphase rate of heat transfer is large, the system attains the local thermal equilibrium (LTE) state and so is for porosity scaled conductivity. When LTNE is strong, the fluid phase reacts faster to the mainstream temperature than the corresponding solid phase. The state of LTE rather depends on radiation and viscous dissipation of the model. Further, numerical solutions successfully predicted the upper and lower branch solutions when the velocity ratio is varied. To assess which of these solutions is practically realizable, an asymptotic analysis on unsteady perturbations for a large time leading to linear stability needs to be performed. This shows that the upper branch solutions are always stable and practically realizable. The physical dynamics behind these results are discussed in detail.

Sign in / Sign up

Export Citation Format

Share Document