scholarly journals Low-Temperature Processing of Titanium Oxide Nanoparticles Photoanodes for Dye-Sensitized Solar Cells

2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
Naji Al Dahoudi ◽  
Qifeng Zhang ◽  
Guozhong Cao
Keyword(s):  
Solar Cells ◽  
Low Temperature ◽  
Dye Sensitized Solar Cells ◽  
Dye Adsorption ◽  
Photocurrent Density ◽  
Titanium Oxide Nanoparticles ◽  
Dye Sensitized ◽  
Low Temperature Processing ◽  
Sensitized Solar Cells ◽  
Better Than

Using the low-temperature processing of different organofunctional silanes like TEOS, GPTS, and MPTS to incorporate within TiO2network, dye-sensitized solar cells (DSCs) processed at low temperatures were obtained. The UV-cured MPTS-modified layer exhibited better performance over the TEOS and GPTS, where better mechanical stable layer is achieved in addition to better interconnection between the TiO2nanoparticles. TheJ-Vcharacteristics of the DSC composed of silane-based layer showed that the improved cell performance was due to the high photocurrent density accompanied with more dye adsorption and higher charge injection from TiO2to FTO substrate resulting from the formation of an ohmic contact with the substrate. The highest conversion efficiency attained for MPTS-TiO2layer cured with UV and followed by heating at 300∘C was3.75±0.07%, which is 2.8 times better than the GPTS-based layer.

Low temperature processing solid-state dye sensitized solar cells

2012 ◽  
Vol 100 (11) ◽  
pp. 113901 ◽  
Author(s):  
C. Y. Jiang ◽  
W. L. Koh ◽  
M. Y. Leung ◽  
S. Y. Chiam ◽  
J. S. Wu ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solid State ◽  
Low Temperature ◽  
Dye Sensitized Solar Cells ◽  
Dye Sensitized ◽  
Low Temperature Processing ◽  
Sensitized Solar Cells

scholarly journals Evaluation and Optimization to Recycle Used TiO2Photoelectrode for Dye-Sensitized Solar Cells

2014 ◽  
Vol 2014 ◽  
pp. 1-7
Author(s):  
Ruei-Tang Chen ◽  
Chien-Feng Liao
Keyword(s):  
Solar Cells ◽  
Dye Sensitized Solar Cells ◽  
Dye Adsorption ◽  
Term Operation ◽  
Dye Sensitized ◽  
Naoh Solution ◽  
Neutral Media ◽  
Sensitized Solar Cells ◽  
Better Than

This study proposes a method for recycling and activating the titanium oxide (TiO2)/fluorine-doped tin oxide (FTO) photoanode in dye-sensitized solar cells (DSCs) by repeated dye adsorption and desorption processes using various desorption agents. This simple and convenient method could be utilized to activate TiO2photoelectrodes for DSCs after the long-term operation. The devices are immersed in acidic, alkaline, and neutral media of various concentrations for desorption and then are soaked in the N719 solution again. The optimal device had an overall power conversion efficiency (AM 1.5 G, 100 mW/cm2) with 5 × 10−3 M NaOH solution as a desorption agent being 6.44% better than that of devices that had not undergone recycling and activation.

Photophysical properties of N719 and Z907 dyes, benchmark sensitizers for dye-sensitized solar cells, at room and low temperature

2021 ◽  
Vol 23 (10) ◽  
pp. 6182-6189
Author(s):  
Dariusz M. Niedzwiedzki
Keyword(s):  
Solar Cells ◽  
Low Temperature ◽  
Optical Spectroscopy ◽  
Room Temperature ◽  
Photophysical Properties ◽  
Dye Sensitized Solar Cells ◽  
Time Resolved ◽  
Dye Sensitized ◽  
Sensitized Solar Cells

Photophysical properties of N719 and Z907, benchmark Ru-dyes used as sensitizers in dye-sensitized solar cells, were studied by static and time-resolved optical spectroscopy at room temperature and 160 K.

scholarly journals Eco-Friendly Dye-Sensitized Solar Cells Based on Water-Electrolytes and Chlorophyll

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2150
Author(s):  
Ji-Hye Kim ◽  
Sung-Yoon Park ◽  
Dong-Hyuk Lim ◽  
So-Young Lim ◽  
Jonghoon Choi ◽  
...  
Keyword(s):  
Solar Cells ◽  
Plasma Treatment ◽  
Ruthenium Complex ◽  
Photovoltaic Performance ◽  
Dye Sensitized Solar Cells ◽  
Dye Adsorption ◽  
Synthesis Process ◽  
Dye Sensitized ◽  
Water Based ◽  
Sensitized Solar Cells

Organic solvents used for electrolytes of dye-sensitized solar cells (DSSCs) are generally not only toxic and explosive but also prone to leakage due to volatility and low surface tension. The representative dyes of DSSCs are ruthenium-complex molecules, which are expensive and require a complicated synthesis process. In this paper, the eco-friendly DSSCs were presented based on water-based electrolytes and a commercially available organic dye. The effect of aging time after the device fabrication and the electrolyte composition on the photovoltaic performance of the eco-friendly DSSCs were investigated. Plasma treatment of TiO2 was adopted to improve the dye adsorption as well as the wettability of the water-based electrolytes on TiO2. It turned out that the plasma treatment was an effective way of improving the photovoltaic performance of the eco-friendly DSSCs by increasing the efficiency by 3.4 times. For more eco-friendly DSSCs, the organic-synthetic dye was replaced by chlorophyll extracted from spinach. With the plasma treatment, the efficiency of the eco-friendly DSSCs based on water-electrolytes and chlorophyll was comparable to those of the previously reported chlorophyll-based DSSCs with non-aqueous electrolytes.

Thiocyanate Free Ruthenium(II) Complexes for Dye Sensitized Solar Cells (DSSCs)

2018 ◽  
Vol 382 ◽  
pp. 369-373
Author(s):  
Usana Mahanitipong ◽  
Preeyapat Prompan ◽  
Rukkiat Jitchati
Keyword(s):  
Solar Cells ◽  
Short Circuit ◽  
Dye Sensitized Solar Cells ◽  
Visible Region ◽  
Photocurrent Density ◽  
Open Circuit ◽  
Dye Sensitized ◽  
Ligand Charge Transfer ◽  
Sensitized Solar Cells ◽  
Open Circuit Photovoltage

The four thiocyanate free ruthenium(II) complexes; [Ru(N^N)2(C^N)]PF6were synthesized and characterized for dye sensitized solar cells (DSSCs). The results showed that the broad absorptions covered the visible region from metal to ligand charge transfer (MLCT) were obtained with the main peaks at 560, 490 and 400 nm. The materials were studied DSSC performance under standard AM 1.5. Compound PP1 showed the power conversion efficiency (PCE) at 3.10%, with a short-circuit photocurrent density (Jsc) of 7.99 mA cm-2, an open-circuit photovoltage (Voc) of 563 mV and a high fill factor (ff) of 0.690.

X-ray Characterization of Dye Adsorption in Coadsorbed Dye-Sensitized Solar Cells

2013 ◽  
Vol 117 (33) ◽  
pp. 17033-17038 ◽  
Author(s):  
Mitsunori Honda ◽  
Masatoshi Yanagida ◽  
Liyuan Han ◽  
Kenjiro Miyano
Keyword(s):  
Solar Cells ◽  
Dye Sensitized Solar Cells ◽  
Dye Adsorption ◽  
X Ray ◽  
Dye Sensitized ◽  
Sensitized Solar Cells

scholarly journals Improved Performance of Dye-Sensitized Solar Cells with TiO2 Nanoparticles/Zn-Doped TiO2 Hollow Fiber Photoanodes

Energies ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 2922 ◽  
Author(s):  
Zainal Arifin ◽  
Suyitno Suyitno ◽  
Syamsul Hadi ◽  
Bayu Sutanto
Keyword(s):  
Solar Cells ◽  
Tio2 Nanoparticles ◽  
Double Layer ◽  
Short Circuit ◽  
Dye Sensitized Solar Cells ◽  
Photocurrent Density ◽  
Light Transmittance ◽  
Doped Tio2 ◽  
Dye Sensitized ◽  
Sensitized Solar Cells

In this study, dye-sensitized solar cells (DSSCs) were fabricated using double-layer photoanodes consisting of TiO2 nanoparticles (NPs) and Zn-doped TiO2 hollow fibers (HFs). The TiO2 HFs were prepared by co-axial electrospinning and used as the light-scattering layer in the DSSC. The thickness variations of the TiO2 NP and Zn-doped TiO2 HF photoanode layers affect the performance of the DSSC, especially the short-circuit photocurrent density. The thickness of the TiO2 NP layer significantly affected the absorbance of photons and N719 dye molecules in the double-layer photoanode, while that of the Zn-doped TiO2 HF layer affected the scattering of light, as indicated by the low light transmittance in the photoanode. Conventional DSSCs consist of single-layer photoanodes, and exhibit relatively low efficiency, i.e., 1.293% and 0.89% for TiO2 NP and Zn-doped TiO2 HF, respectively. However, herein, the highest efficiency of the DSSC (3.122%) was achieved with a 15 μm NP-5 μm HF photoanode, for which the short-circuit photocurrent density, open-circuit photovoltage, and fill factor were 15.81 mA/cm2, 0.566 V, and 34.91%, respectively.

Sign in / Sign up

Export Citation Format

Share Document