scholarly journals Propose a Wall Shear Stress Divergence to Estimate the Risks of Intracranial Aneurysm Rupture

2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
Y. Zhang ◽  
H. Takao ◽  
Y. Murayama ◽  
Y. Qian
Keyword(s):  
Shear Stress ◽  
Wall Shear Stress ◽  
Intracranial Aneurysm ◽  
Risk Estimation ◽  
Aneurysm Rupture ◽  
Patient Specific ◽  
Luminal Surface ◽  
Risk Of Rupture ◽  
Computational Fluid Dynamics Cfd ◽  
Wall Shear

Although wall shear stress (WSS) has long been considered a critical indicator of intracranial aneurysm rupture, there is still no definite conclusion as to whether a high or a low WSS results in aneurysm rupture. The reason may be that the effect of WSS direction has not been fully considered. The objectives of this study are to investigate the magnitude of WSS (WSS) and its divergence on the aneurysm surface and to test the significance of both in relation to the aneurysm rupture. Patient-specific computational fluid dynamics (CFD) was used to compute WSS and wall shear stress divergence (WSSD) on the aneurysm surface for nineteen patients. Our results revealed that if highWSSis stretching aneurysm luminal surface, and the stretching region is concentrated, the aneurysm is under a high risk of rupture. It seems that, by considering both direction and magnitude of WSS, WSSD may be a better indicator for the risk estimation of aneurysm rupture (154).

Clinical, morphological, and hemodynamic independent characteristic factors for rupture of posterior communicating artery aneurysms

2015 ◽  
Vol 8 (8) ◽  
pp. 808-812 ◽  
Author(s):  
Ying Zhang ◽  
Linkai Jing ◽  
Jian Liu ◽  
Chuanhui Li ◽  
Jixing Fan ◽  
...  
Keyword(s):  
Shear Stress ◽  
Wall Shear Stress ◽  
Univariate Analysis ◽  
Multivariate Logistic Regression Analysis ◽  
Aneurysm Rupture ◽  
Irregular Shape ◽  
Posterior Communicating Artery ◽  
Patient Specific ◽  
Younger Age ◽  
Wall Shear

ObjectiveTo identify clinical, morphological, and hemodynamic independent characteristic factors that discriminate posterior communicating artery (PCoA) aneurysm rupture status.Methods173 patients with single PCoA aneurysms (108 ruptured, 65 unruptured) between January 2012 and June 2014 were retrospectively collected. Patient-specific models based on their three-dimensional digital subtraction angiography images were constructed and analyzed by a computational fluid dynamic method. All variables were analyzed by univariate analysis and multivariate logistic regression analysis.ResultsTwo clinical factors (younger age and atherosclerosis), three morphological factors (higher aspect ratio, bifurcation type, and irregular shape), and six hemodynamic factors (lower mean and minimum wall shear stress, higher oscillatory shear index, a greater portion of area under low wall shear stress, unstable and complex flow pattern) were significantly associated with PCoA aneurysm rupture. Independent factors characterizing the rupture status were identified as age (OR 0.956, p=0.015), irregular shape (OR 6.709, p<0.001), and minimum wall shear stress (OR 0.001, p=0.038).ConclusionsWe combined clinical, morphological, and hemodynamic characteristics analysis and found the three strongest independent factors for PCoA aneurysm rupture were younger age, irregular shape, and low minimum wall shear stress. This may be useful for guiding risk assessments and subsequent treatment decisions for PCoA aneurysms.

The Relationship Between the Arterial Geometry and Wall Shear Stress in the Vertebrobasilar System

2019 ◽  
Author(s):  
Fangjia Pan ◽  
Hitomi Anzai ◽  
Shunji Mugikura ◽  
Ko Kitamura ◽  
Makoto Ohta
Keyword(s):  
Risk Factors ◽  
Shear Stress ◽  
Wall Shear Stress ◽  
Fluid Shear Stress ◽  
Arterial Disease ◽  
Patient Specific ◽  
Vertebrobasilar System ◽  
Basilar Arteries ◽  
Computational Fluid Dynamics Cfd ◽  
Wall Shear

Abstract Vertebrobasilar atherosclerosis is an arterial disease; without successful treatment, it has a mortality rate approximately 80%–95%. Thus, predicting risk factors of vertebrobasilar atherosclerosis is of utmost importance. Previous studies have demonstrated that wall shear stress (WSS) contributes to atherosclerosis. In addition, geometry and WSS are correlated. The present study focuses on the description of equation using detailed relationship between arterial geometry and WSS in the vertebrobasilar system (VBS); magnetic resonance (MR) imaging with computational fluid dynamics (CFD) was used for the analysis. Using constructed patient-specific models, WSS of basilar arteries (BAs) was calculated and then analyzed with morphological parameters. According to the statistical results, both the area and curvature of BAs are associated with WSS. Based on the relations, a liner fitted equation can be proposed. As this study is underway, more precise evaluation of the correlation between morphology and fluid shear stress could help predict risk factors and select treatment methods for this arterial disease.

scholarly journals Wall shear stress gradient is independently associated with middle cerebral artery aneurysm development: a case-control CFD patient-specific study based on 77 patients

BMC Neurology ◽  
2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Mikołaj Zimny ◽  
Edyta Kawlewska ◽  
Anna Hebda ◽  
Wojciech Wolański ◽  
Piotr Ładziński ◽  
...  
Keyword(s):  
Shear Stress ◽  
Wall Shear Stress ◽  
Middle Cerebral Artery ◽  
Cerebral Artery ◽  
Case Control ◽  
Independent Effect ◽  
Patient Specific ◽  
Aneurysm Formation ◽  
Wall Shear ◽  
Mca Aneurysm

Abstract Background Previously published computational fluid dynamics (CFD) studies regarding intracranial aneurysm (IA) formation present conflicting results. Our study analysed the involvement of the combination of high wall shear stress (WSS) and a positive WSS gradient (WSSG) in IA formation. Methods We designed a case-control study with a selection of 38 patients with an unruptured middle cerebral artery (MCA) aneurysm and 39 non-aneurysmal controls to determine the involvement of WSS, oscillatory shear index (OSI), the WSSG and its absolute value (absWSSG) in aneurysm formation based on patient-specific CFD simulations using velocity profiles obtained from transcranial colour-coded sonography. Results Among the analysed parameters, only the WSSG had significantly higher values compared to the controls (11.05 vs − 14.76 [Pa/mm], P = 0.020). The WSS, absWSSG and OSI values were not significantly different between the analysed groups. Logistic regression analysis identified WSS and WSSG as significant co-predictors for MCA aneurysm formation, but only the WSSG turned out to be a significant independent prognosticator (OR: 1.009; 95% CI: 1.001–1.017; P = 0.025). Significantly more patients (23/38) in the case group had haemodynamic regions of high WSS combined with a positive WSSG near the bifurcation apex, while in the control group, high WSS was usually accompanied by a negative WSSG (14/39). From the analysis of the ROC curve for WSSG, the area under the curve (AUC) was 0.654, with the optimal cut-off value −0.37 Pa/mm. The largest AUC was recognised for combined WSS and WSSG (AUC = 0.671). Our data confirmed that aneurysms tend to form near the bifurcation apices in regions of high WSS values accompanied by positive WSSG. Conclusions The development of IAs is determined by an independent effect of haemodynamic factors. High WSS impacts MCA aneurysm formation, while a positive WSSG mainly promotes this process.

scholarly journals Genetic correlates of wall shear stress in a patient-specific 3D-printed cerebral aneurysm model

2019 ◽  
Vol 11 (10) ◽  
pp. 999-1003 ◽  
Author(s):  
Michael R Levitt ◽  
Christian Mandrycky ◽  
Ashley Abel ◽  
Cory M Kelly ◽  
Samuel Levy ◽  
...  
Keyword(s):  
Endothelial Cells ◽  
Shear Stress ◽  
Wall Shear Stress ◽  
Cerebral Aneurysm ◽  
Cell Morphology ◽  
Patient Specific ◽  
Parent Vessel ◽  
3D Printed ◽  
Wall Shear ◽  
Dynamics Simulations

ObjectivesTo study the correlation between wall shear stress and endothelial cell expression in a patient-specific, three-dimensional (3D)-printed model of a cerebral aneurysm.Materials and methodsA 3D-printed model of a cerebral aneurysm was created from a patient’s angiogram. After populating the model with human endothelial cells, it was exposed to media under flow for 24 hours. Endothelial cell morphology was characterized in five regions of the 3D-printed model using confocal microscopy. Endothelial cells were then harvested from distinct regions of the 3D-printed model for mRNA collection and gene analysis via quantitative polymerase chain reaction (qPCR.) Cell morphology and mRNA measurement were correlated with computational fluid dynamics simulations.ResultsThe model was successfully populated with endothelial cells, which survived under flow for 24 hours. Endothelial morphology showed alignment with flow in the proximal and distal parent vessel and aneurysm neck, but disorganization in the aneurysm dome. Genetic analysis of endothelial mRNA expression in the aneurysm dome and distal parent vessel was compared with the proximal parent vessels. ADAMTS-1 and NOS3 were downregulated in the aneurysm dome, while GJA4 was upregulated in the distal parent vessel. Disorganized morphology and decreased ADAMTS-1 and NOS3 expression correlated with areas of substantially lower wall shear stress and wall shear stress gradient in computational fluid dynamics simulations.ConclusionsCreating 3D-printed models of patient-specific cerebral aneurysms populated with human endothelial cells is feasible. Analysis of these cells after exposure to flow demonstrates differences in both cell morphology and genetic expression, which correlate with areas of differential hemodynamic stress.

scholarly journals Effects of a Short-Term Left Ventricular Assist Device on Hemodynamics in a Heart Failure Patient-Specific Aorta Model: A CFD Study

2021 ◽  
Vol 12 ◽  
Author(s):  
Yu Wang ◽  
Junwei Wang ◽  
Jing Peng ◽  
Mingming Huo ◽  
Zhiqiang Yang ◽  
...  
Keyword(s):  
Shear Stress ◽  
Wall Shear Stress ◽  
Pressure Difference ◽  
Left Ventricular ◽  
Patient Specific ◽  
Short Term ◽  
Ventricular Assist ◽  
Left Ventricular Assist ◽  
Wall Shear ◽  
Hemodynamic Performance

Patients with heart failure (HF) or undergoing cardiogenic shock and percutaneous coronary intervention require short-term cardiac support. Short-term cardiac support using a left ventricular assist device (LVAD) alters the pressure and flows of the vasculature by enhancing perfusion and improving the hemodynamic performance for the HF patients. However, due to the position of the inflow and outflow of the LVAD, the local hemodynamics within the aorta is altered with the LVAD support. Specifically, blood velocity, wall shear stress, and pressure difference are altered within the aorta. In this study, computational fluid dynamics (CFD) was used to elucidate the effects of a short-term LVAD for hemodynamic performance in a patient-specific aorta model. The three-dimensional (3D) geometric models of a patient-specific aorta and a short-term LVAD, Impella CP, were created. Velocity, wall shear stress, and pressure difference in the patient-specific aorta model with the Impella CP assistance were calculated and compared with the baseline values of the aorta without Impella CP support. Impella CP support augmented cardiac output, blood velocity, wall shear stress, and pressure difference in the aorta. The proposed CFD study could analyze the quantitative changes in the important hemodynamic parameters while considering the effects of Impella CP, and provide a scientific basis for further predicting and assessing the effects of these hemodynamic signals on the aorta.

scholarly journals Assessing Bioinspired Topographies for their Antifouling Potential Control Using Computational Fluid Dynamics (CFD)

2018 ◽  
Vol 152 ◽  
pp. 02004 ◽  
Author(s):  
Jacky Ling ◽  
Felicia Wong Yen Myan
Keyword(s):  
Shear Stress ◽  
Wall Shear Stress ◽  
Extended Period ◽  
Slip Boundary Condition ◽  
Shear Stresses ◽  
Cfd Simulations ◽  
Potential Control ◽  
Slip Boundary ◽  
Computational Fluid Dynamics Cfd ◽  
Wall Shear

Biofouling is the accumulation of unwanted material on surfaces submerged or semi submerged over an extended period. This study investigates the antifouling performance of a new bioinspired topography design. A shark riblets inspired topography was designed with Solidworks and CFD simulations were antifouling performance. The study focuses on the fluid flow velocity, the wall shear stress and the appearance of vortices are to be noted to determine the possible locations biofouling would most probably occur. The inlet mass flow rate is 0.01 kgs-1 and a no-slip boundary condition was applied to the walls of the fluid domain. Simulations indicate that Velocity around the topography averaged at 7.213 x 10-3 ms-1. However, vortices were observed between the gaps. High wall shear stress is observed at the peak of each topography. In contrast, wall shear stress is significantly low at the bed of the topography. This suggests the potential location for the accumulation of biofouling. Results show that bioinspired antifouling topography can be improved by reducing the frequency of gaps between features. Linear surfaces on the topography should also be minimized. This increases the avenues of flow for the fluid, thus potentially increasing shear stresses with surrounding fluid leading to better antifouling performance.

Sign in / Sign up

Export Citation Format

Share Document