scholarly journals Flow and Heat Transfer in a Liquid Film over a Permeable Stretching Sheet

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
R. C. Aziz ◽  
I. Hashim ◽  
A. K. Alomari
Keyword(s):  
Heat Transfer ◽  
Liquid Film ◽  
Stretching Sheet ◽  
Temperature Fields ◽  
Temperature Profiles ◽  
Suction Parameter ◽  
Boundary Layer Equations ◽  
Similarity Transformations ◽  
Flow And Heat Transfer ◽  
Homotopy Analysis

An analysis has been carried out to study the flow and heat transfer in a liquid film over a permeable stretching sheet. Using similarity transformations, the time-dependent boundary layer equations are reduced to a set of nonlinear ordinary differential equations. The resulting parameter problem and velocity as well as temperature fields are solved using the homotopy analysis method (HAM). Analytic series solutions are given, and numerical results for velocity and the temperature profiles are presented through graphs of different values for pertinent parameter. The effects of unsteadiness parameter and permeability parameter on the velocity and temperature profiles are explored for different values of blowing or suction parameter.

scholarly journals Shape Effect of Nanosize Particles on Magnetohydrodynamic Nanofluid Flow and Heat Transfer over a Stretching Sheet with Entropy Generation

Entropy ◽  
2020 ◽  
Vol 22 (10) ◽  
pp. 1171
Author(s):  
Umair Rashid ◽  
Dumitru Baleanu ◽  
Azhar Iqbal ◽  
Muhammd Abbas
Keyword(s):  
Heat Transfer ◽  
Entropy Generation ◽  
Stretching Sheet ◽  
Graphical Form ◽  
Physical Parameters ◽  
Shape Effect ◽  
Analysis Method ◽  
Nanofluid Flow ◽  
Flow And Heat Transfer ◽  
Homotopy Analysis

Magnetohydrodynamic nanofluid technologies are emerging in several areas including pharmacology, medicine and lubrication (smart tribology). The present study discusses the heat transfer and entropy generation of magnetohydrodynamic (MHD) Ag-water nanofluid flow over a stretching sheet with the effect of nanoparticles shape. Three different geometries of nanoparticles—sphere, blade and lamina—are considered. The problem is modeled in the form of momentum, energy and entropy equations. The homotopy analysis method (HAM) is used to find the analytical solution of momentum, energy and entropy equations. The variations of velocity profile, temperature profile, Nusselt number and entropy generation with the influences of physical parameters are discussed in graphical form. The results show that the performance of lamina-shaped nanoparticles is better in temperature distribution, heat transfer and enhancement of the entropy generation.

Flow and Heat Transfer of Nanofluids Over a Rotating Porous Disk with Velocity Slip and Temperature Jump

2015 ◽  
Vol 70 (5) ◽  
pp. 351-358 ◽  
Author(s):  
Chenguang Yin ◽  
Liancun Zheng ◽  
Chaoli Zhang ◽  
Xinxin Zhang
Keyword(s):  
Heat Transfer ◽  
Temperature Jump ◽  
Velocity Slip ◽  
Temperature Fields ◽  
Analysis Method ◽  
Governing Equations ◽  
Porous Disk ◽  
Flow And Heat Transfer ◽  
Homotopy Analysis ◽  
Good Agreement

AbstractIn this article, we discuss the flow and heat transfer of nanofluids over a rotating porous disk with velocity slip and temperature jump. Three types of nanoparticles – Cu, Al2O3, and CuO – are considered with water as the base fluid. The nonlinear governing equations are reduced into ordinary differential equations by Von Karman transformations and solved using homotopy analysis method (HAM), which is verified in good agreement with numerical ones. The effects of involved parameters such as porous parameter, velocity slip, temperature jump, as well as the types of nanofluids on velocity and temperature fields are presented graphically and analysed.

scholarly journals MHD Flow and Heat Transfer in a Channel Bounded by a Shrinking Sheet and a Porous Medium Bed: Homotopy Analysis Method

2013 ◽  
Vol 2013 ◽  
pp. 1-10 ◽  
Author(s):  
Dileep Singh Chauhan ◽  
Rashmi Agrawal
Keyword(s):  
Porous Medium ◽  
Mhd Flow ◽  
Temperature Fields ◽  
Shrinking Sheet ◽  
Analysis Method ◽  
Governing Equations ◽  
Similarity Transformations ◽  
Flow And Heat Transfer ◽  
Homotopy Analysis ◽  
Surface Similarity

MHD flow of viscous conducting fluid is considered between a shrinking sheet and a porous medium bed. Suction is applied at the upper shrinking sheet and its surface temperature is always maintained higher than the temperature of the lower porous bed surface. Similarity transformations and HAM are used to solve the governing equations for velocity and temperature fields. The effects of various pertinent parameters on the results are discussed graphically.

scholarly journals Effects of Thermocapillarity and Thermal Radiation on Flow and Heat Transfer in a Thin Liquid Film on an Unsteady Stretching Sheet

2012 ◽  
Vol 2012 ◽  
pp. 1-14 ◽  
Author(s):  
R. C. Aziz ◽  
I. Hashim ◽  
S. Abbasbandy
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Thermal Radiation ◽  
Stretching Sheet ◽  
Thin Liquid Film ◽  
Unsteady Stretching Sheet ◽  
Flow And Heat Transfer ◽  
Homotopy Analysis ◽  
Dependent Parameter ◽  
Layer Flow

This paper examines the effects of thermocapillarity and thermal radiation on the boundary layer flow and heat transfer in a thin film on an unsteady stretching sheet with nonuniform heat source/sink. The governing partial differential equations are converted into ordinary differential equations by a similarity transformation and then are solved by using the homotopy analysis method (HAM). The effects of the radiation parameter, the thermocapillarity number, and the temperature-dependent parameter in this study are discussed and presented graphically via velocity and temperature profiles.

Unsteady Flow and Heat Transfer Characteristics of Fluid Flow Over a Shrinking Permeable Infinite Long Cylinder

2016 ◽  
Vol 138 (9) ◽  
Author(s):  
Emad J. Elnajjar ◽  
Qasem M. Al-Mdallal ◽  
Fathi M. Allan
Keyword(s):  
Heat Transfer ◽  
Prandtl Number ◽  
Navier Stokes ◽  
Suction Parameter ◽  
Similarity Transformations ◽  
Flow And Heat Transfer ◽  
Runge Kutta Method ◽  
Method Of Solution ◽  
Energy Equations ◽  
Long Cylinder

The present work studies the unsteady, viscous, and incompressible laminar flow and heat transfer over a shrinking permeable cylinder. The unsteady nonlinear Navier–Stokes and energy equations are reduced, using similarity transformations, to a system of nonlinear ordinary differential equations. The boundary conditions associated with the governing equations are the time dependent surface temperature and flow conditions. The method of solution is based on a combination of the implicit Runge–Kutta method and the shooting method. The present study predicts two solutions for both the flow and heat transfer fields, and a unique solution at a specific critical unsteadiness parameter. An analysis of the results, for a specific suction parameter, suggests that the corresponding unique unsteadiness parameter does not depend on the Prandtl number. However, the unique rate of heat transfer is increasing as the Prandtl number increases. In addition, our results confirm that the unique value of heat transfer rate increases as the suction parameter increases, regardless the value of the Prandtl number.

scholarly journals Bioconvection heat transfer of a nanofluid over a stretching sheet with velocity slip and temperature jump

2017 ◽  
Vol 21 (6 Part A) ◽  
pp. 2347-2356 ◽  
Author(s):  
Bingyu Shen ◽  
Liancun Zheng ◽  
Chaoli Zhang ◽  
Xinxin Zhang
Keyword(s):  
Heat Transfer ◽  
Stretching Sheet ◽  
Temperature Jump ◽  
Lewis Number ◽  
Velocity Slip ◽  
Analysis Method ◽  
Gyrotactic Microorganisms ◽  
Similarity Transformations ◽  
Homotopy Analysis ◽  
Effects Of Radiation

This paper presents an investigation for bioconvection heat transfer of a nanofluid containing gyrotactic microorganisms over a stretching sheet, in which the effects of radiation, velocity slip, and temperature jump are taken into account. The non-linear governing equations are reduced into four ordinary differential equations by similarity transformations and solved by homotopy analysis method, which is verified with numerical results in good agree. Results indicate that the density of motile microorganisms and gyrotactic microorganisms increase with bioconvection Rayleigh number, while decrease with increasing in bioconvection Peclet number and bioconvection Lewis number. It is also found that the Nusselt number, Sherwood number, and gyrotactic microorganisms density depend strongly on the buoyancy, nanofluids, and bioconvection parameters.

Sign in / Sign up

Export Citation Format

Share Document