scholarly journals A New Design Method of High-Order Modified Repetitive Control Systems for Reference Inputs with Uncertain Period-Time

2013 ◽  
Vol 2013 ◽  
pp. 1-10 ◽  
Author(s):  
Zhongxiang Chen ◽  
Kou Yamada ◽  
Tatsuya Sakanushi
Keyword(s):  
Control System ◽  
Control Systems ◽  
Closed Loop ◽  
Design Method ◽  
Repetitive Control ◽  
High Order ◽  
Stabilizing Controllers ◽  
Control Precision ◽  
Free Parameters ◽  
High Control

This paper considers the design of high-order modified repetitive control systems for periodic reference inputs with uncertain period-time. The objective of this work was to develop a new design method so that the closed-loop high-order modified repetitive control system is robustly stable with high control precision for periodic reference inputs with uncertain period-time. The parametrization of all stabilizing controllers containing three free parameters is proposed based on the Youla-Kucera parameterization. Moreover, to obtain the free parameters, the constraint conditions were converted into stability conditions in the form of Bilinear Matrix Inequalities that can be solved using the available software. In addition, the high control precision is guaranteed by designing the free parameters after the control characteristic of this control system. The validity and effectiveness of the proposed design method were verified by numerical examples.

A Design Method for Two-Degree-of-Freedom Multi-Period Repetitive Control Systems with the Specified Frequency Characteristic

2011 ◽  
Vol 497 ◽  
pp. 255-269
Author(s):  
Zhong Xiang Chen ◽  
Kou Yamada ◽  
Nobuaki Nakazawa ◽  
Iwanori Murakami ◽  
Yoshinori Ando ◽  
...  
Keyword(s):  
Control System ◽  
Control Systems ◽  
Frequency Characteristic ◽  
Design Method ◽  
Repetitive Control ◽  
Output Characteristic ◽  
Degree Of Freedom ◽  
Disturbance Attenuation ◽  
Input Output ◽  
Two Degree Of Freedom

Multi-period repetitive controllers improve the disturbance attenuation characteristic of themodified repetitive control system that follows the periodic reference input with small steady stateerror. Recently, the parameterization of all stabilizing multi-period repetitive controllers was studied.However, when the parameterization of all stabilizing multi-period repetitive controllers is used, theinput-output characteristic and the feedback characteristic cannot be specified separately. From thepractical point of view, it is desirable to specify the input-output characteristic and the feedback characteristicseparately. In addition, the parameterization is useful to design stabilizing controllers. Fromthis view-point, the parameterization of all stabilizing two-degree-of-freedom multi-period repetitivecontrollers those can specify the input-output characteristic and the disturbance attenuation characteristicseparately was solved by Yamada et al. However, when we design a stabilizing two-degree-offreedommulti-period repetitive controllers using the parameterization proposed by Yamada et al, thefrequency characteristic of the control system cannot be settled so easily. From the practical point ofview, the frequency characteristic of the control systems are required to be easily settled. This problemcan be solved by obtaining the parameterization of all stabilizing two-degree-of-freedom multi-periodrepetitive controllers with the specified frequency characteristic. In this paper, we propose the parameterizationof all stabilizing two-degree-of-freedom multi-period repetitive controllers with thespecified frequency characteristic.

Intelligent Information of TS Fuzzy PID Control System of BLDCM

2013 ◽  
Vol 846-847 ◽  
pp. 313-316 ◽  
Author(s):  
Xiao Yun Zhang
Keyword(s):  
Control System ◽  
Dynamic Model ◽  
Pid Control ◽  
Control Method ◽  
Design Method ◽  
Fuzzy Pid ◽  
Fuzzy Pid Control ◽  
Control Precision ◽  
Simulation Results ◽  
Intelligent Information

This paper presented a new method based on the Fuzzy self - adaptive PID for BLDCM. This method overcomes some defects of the traditional PID control. Such as lower control precision and worse anti - jamming performance. It dynamic model of BLDCM was built, and then design method for TS fuzzy PID model is given, At last, it compared simulation results of PID control method with TS Fuzzy PID control method. The results show that the TS Fuzzy PID control method has more excellent dynamic antistatic performances, as well as anti-jamming performance. The experiment shows that TS fuzzy PID control has the stronger adaptability robustness and transplant.

Digital DC Speed Control System in Mine Hoist Application

2011 ◽  
Vol 219-220 ◽  
pp. 1017-1021
Author(s):  
Rui He ◽  
Yun Ping Ge
Keyword(s):  
Control System ◽  
Closed Loop ◽  
Speed Control ◽  
Closed Loop System ◽  
Pi Regulator ◽  
Control Precision ◽  
Speed Control System ◽  
Digital Trigger ◽  
Mine Hoist ◽  
Work Stability

Mine hoist shoulder important transport tasks. Through the analysis of the main circuit of mine hoist, this paper studies out ASCS digital DC speed control system whose core is microprocessor and whose hardware part constitutes digital trigger and double closed loop system. The software part not only achieves the system's digital PI regulator, logic switching, digital trigger phase shift, pulse channel selection and pulse width setting, but also realizes the systematic detection, monitoring, fault diagnosis, which improves the control precision and work stability of the system.

Stability Robustness of Repetitive Control Systems With Zero Phase Compensation

1990 ◽  
Vol 112 (3) ◽  
pp. 320-324 ◽  
Author(s):  
C. C. H. Ma
Keyword(s):  
Control System ◽  
Large Class ◽  
Control Systems ◽  
Repetitive Control ◽  
Tracking Performance ◽  
Three Solutions ◽  
Phase Compensation ◽  
Saturation Nonlinearity ◽  
Stability Robustness ◽  
Zero Phase

It is shown that a special zero phase control (ZPC) system introduced by Tomizuka is L∞ stable against a large class of common nonlinearities. However, it still suffers from the generic nonrobustness problem associated with a linear repetitive control system when subjected to a saturation nonlinearity. For the special ZPC system, however, three solutions exist for the problem, two of which do not degrade the repetitive tracking performance.

Tangible Programming for Basic Control System New Frameworks to Engineering Education for Children

2014 ◽  
Vol 931-932 ◽  
pp. 1298-1302
Author(s):  
Thiang Meadthaisong ◽  
Siwaporn Meadthaisong ◽  
Sarawut Chaowaskoo
Keyword(s):  
Control System ◽  
Engineering Education ◽  
Control Systems ◽  
Primary Schools ◽  
Closed Loop ◽  
Open Loop ◽  
Closed Loop Control ◽  
College Level ◽  
Loop Control ◽  
Tangible Programming

Programming control in industrial design is by its nature expert upon an example being Programmable Logic Controller (PLC). Such programmes are unsuitable for children or novices as they cannot understand how to use the programme. This research seeks to present tangible programming for a basic control system in new frameworks in engineering education for children. Such programmes could be for use in kindergartens, primary schools or general teaching where knowledge about basic control is required. Normally open-loop and closed-loop control system programming is taught at university and college level. This may be late as far as acquiring knowledge of basic control systems is concerned. Using tangible programming without a computer but instructions and interface, relay and motor could result in children in kindergartens and primary schools being able to programme open-looped control systems which mix chemicals or closed-loop control systems which control conveyor belts. However, the children would not be able to undertake programming using programmable control in a similar scenario.

scholarly journals Lead and lag controller design in fractional-order control systems

2019 ◽  
Vol 52 (7-8) ◽  
pp. 1017-1028
Author(s):  
Tufan Dogruer ◽  
Nusret Tan
Keyword(s):  
Control System ◽  
Control Systems ◽  
Fractional Order ◽  
Fourth Order ◽  
Controller Design ◽  
Design Method ◽  
Performance Criteria ◽  
Order System ◽  
Fractional Order Control ◽  
Minimum Error

This paper presents a controller design method using lead and lag controllers for fractional-order control systems. In the presented method, it is aimed to minimize the error in the control system and to obtain controller parameters parametrically. The error occurring in the system can be minimized by integral performance criteria. The lead and lag controllers have three parameters that need to be calculated. These parameters can be determined by the simulation model created in the Matlab environment. In this study, the fractional-order system in the model was performed using Matsuda’s fourth-order integer approximation. In the optimization model, the error is minimized by using the integral performance criteria, and the controller parameters are obtained for the minimum error values. The results show that the presented method gives good step responses for lead and lag controllers.

Control System of Moving Target Simulator

2012 ◽  
Vol 442 ◽  
pp. 488-492 ◽  
Author(s):  
Rong Chun Sun ◽  
Xue Song
Keyword(s):  
Control System ◽  
Image Motion ◽  
Stepper Motor ◽  
Moving Target ◽  
The Core ◽  
Control Precision ◽  
Ground Target ◽  
Design Requirements ◽  
High Control ◽  
Rotation Motion

To test the accuracy of image motion compensation of space camera, the moving target simulator was developed according to the principle of relative motion. As the core controller, PIC microcontroller controls DC motor to drive photoetching turntable rotating to simulate the relative linear velocity between ground target and aircraft, and the rotation motion is divided into uniform velocity rotation and sinusoidal velocity rotation. Furthermore, the simulation of drift angle of aircraft was realized by controlling stepper motor to drive the photoetching turntable deflecting, and the deflection includes uniform deflection, sinusoidal velocity deflection and specified angle positioning. The design of the hardware and software of control system has been completed and tested, and the experiment results show that the control system has high control precision and meets the design requirements.

A Design Method for Two-Degree-of-Freedom Simple Multi-Period Repetitive Control Systems

2010 ◽  
Vol 36 ◽  
pp. 243-252 ◽  
Author(s):  
Yoshinori Ando ◽  
Tatsuya Sakanushi ◽  
Kou Yamada ◽  
Iwanori Murakami ◽  
Takaaki Hagiwara ◽  
...  
Keyword(s):  
Control System ◽  
Control Systems ◽  
Transfer Functions ◽  
Design Method ◽  
Output Characteristic ◽  
Degree Of Freedom ◽  
Disturbance Attenuation ◽  
Input Output ◽  
Attenuation Characteristic ◽  
Two Degree Of Freedom

The multi-period repetitive (MPR) control system is a type of servomechanism for periodic reference inputs. Using MPR controllers, transfer functions from the reference input to the output and from the disturbance to the output of the MPR control system have infinite numbers of poles. To specify the input-output characteristic and the disturbance attenuation characteristic easily, Yamada and Takenaga proposed MPR control systems, named simple multi-period repetitive (simple MPR) control systems, where these transfer functions have finite numbers of poles. In addition, Yamada and Takenaga clarified the parameterization of all stabilizing simple MPR controllers. However, using the simple MPR repetitive controller by Yamada and Takenaga, we cannot specify the input-output characteristic and the disturbance attenuation characteristic separately. From the practical point of view, it is desirable to specify the input-output characteristic and the disturbance attenuation characteristic separately. The purpose of this paper is to propose the parameterization of all stabilizing two-degree-of-freedom (TDOF) simple MPR controllers that can specify the input-output characteristic and the disturbance attenuation characteristic separately.

Sign in / Sign up

Export Citation Format

Share Document