scholarly journals Realization of Colored Multicrystalline Silicon Solar Cells with SiO2/SiNx:H Double Layer Antireflection Coatings

2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
Minghua Li ◽  
Libin Zeng ◽  
Yifeng Chen ◽  
Lin Zhuang ◽  
Xuemeng Wang ◽  
...  
Keyword(s):  
Solar Cells ◽  
Double Layer ◽  
Short Circuit ◽  
Single Layer ◽  
Short Circuit Current ◽  
Industrial Applications ◽  
Short Circuit Current Density ◽  
Multicrystalline Silicon ◽  
Antireflection Coatings ◽  
Si Solar Cells

We presented a method to use SiO2/SiNx:H double layer antireflection coatings (DARC) on acid textures to fabricate colored multicrystalline silicon (mc-Si) solar cells. Firstly, we modeled the perceived colors and short-circuit current density (Jsc) as a function of SiNx:H thickness for single layer SiNx:H, and as a function of SiO2thickness for the case of SiO2/SiNx:H (DARC) with fixed SiNx:H (refractive indexn=2.1at 633 nm, and thickness = 80 nm). The simulation results show that it is possible to achieve various colors by adjusting the thickness of SiO2to avoid significant optical losses. Therefore, we carried out the experiments by using electron beam (e-beam) evaporation to deposit a layer of SiO2over the standard SiNx:H for156×156 mm2mc-Si solar cells which were fabricated by a conventional process. Semisphere reflectivity over 300 nm to 1100 nm andI-Vmeasurements were performed for grey yellow, purple, deep blue, and green cells. The efficiency of colored SiO2/SiNx:H DARC cells is comparable to that of standard SiNx:H light blue cells, which shows the potential of colored cells in industrial applications.

Investigation on AR Techniques of Silicon Solar Cells

2014 ◽  
Vol 521 ◽  
pp. 52-55
Author(s):  
Chun Rong Xue ◽  
Yu Qin Gu ◽  
Ming Liang Deng
Keyword(s):  
Solar Cells ◽  
Reflection Loss ◽  
Short Circuit ◽  
Surface Texturing ◽  
Single Layer ◽  
Short Circuit Current ◽  
Silicon Solar Cells ◽  
Textured Surface ◽  
Antireflection Coatings ◽  
Si Solar Cells

This work presents study of both the antireflection coatings on silicon solar cells and surface texture of silicon solar cell, with the aim to prepare high quality Si solar cells. Surface texturing, either in combination with an anti-reflection coating or by itself, can be used to minimize reflection, but the large reflection loss can be reduced significantly via a suitable anti-reflecting coatings. Significant improvement of the short circuit current after anti-reflecting coatings was observed. It is found that the currentvoltage characteristic with a double-layer anti-reflecting coatings is better than that with a single-layer anti-reflecting coatings. Depositing a multilayer on the textured surface reduces the large reflection loss significantly. The short circuit current of silicon solar cells has significant improvement after depositing anti-reflecting coatings on textured surface silicon, and it increases the efficiency of the Si solar cells.

Investigation on Antireflection Coatings for Silicon Solar Cells

2014 ◽  
Vol 521 ◽  
pp. 33-36 ◽  
Author(s):  
Chun Rong Xue ◽  
Yu Qin Gu ◽  
Ming Liang Deng
Keyword(s):  
Solar Cells ◽  
Short Circuit ◽  
Optical Loss ◽  
Single Layer ◽  
Short Circuit Current ◽  
Phase Changes ◽  
Silicon Solar Cells ◽  
Antireflection Coatings ◽  
Si Solar Cells ◽  
Average Reflectance

Thin-film anti-reflecting coatings can greatly reduce the optical loss by making use of phase changes, and the reflectivity depends on the refractive index of materials. TiO2ZnS and Si3N4coatings are suitable for using as single layer anti-reflecting coating on bare silicon surface, while the MgF2/ZnS and SiO2/TiO2double-layer anti-reflecting coating result in a minimum reflectance lower than 0.5% over broad spectral regions, with an average reflectance of approximately 2.25% between 400 and 1100 nm on the non-textured Si substrate. The short circuit current of silicon solar cells has significant improvement after depositing anti-reflecting coatings, and it increases the efficiency of the Si solar cells.

Improving Performance of Amorphous Silicon Solar Cells Using Tungsten Oxide as a Novel Buffer Layer between the SnO2/p-a-SiC Interface

2010 ◽  
Vol 1245 ◽  
Author(s):  
Liang Fang ◽  
Seung Jae Baik ◽  
Koseng Su Lim ◽  
Seung Hyup Yoo ◽  
Myung Soo Seo ◽  
...  
Keyword(s):  
Solar Cells ◽  
Amorphous Silicon ◽  
Tungsten Oxide ◽  
Buffer Layer ◽  
Layer Structure ◽  
Short Circuit ◽  
Short Circuit Current ◽  
Short Circuit Current Density ◽  
Si Solar Cells ◽  
Photovoltaic Characteristics

AbstractA thermally evaporated p-type amorphous tungsten oxide (p-a-WO3) film was introduced as a novel buffer layer between SnO2 and p-type amorphous silicon carbide (p-a-SiC) of pin-type amorphous silicon (a-Si) based solar cells. By using this film, a-Si solar cells with a p-a-WO3/p-a-SiC double p-layer structure were fabricated and the cell photovoltaic characteristics were investigated as a function of p-a-WO3 layer thickness. By inserting a 2 nm-thick p-a-WO3 layer between SnO2 and a 6 nm-thick p-a-SiC layer, the short circuit current density increased from 9.73 to 10.57 mA/cm2, and the conversion efficiency was enhanced from 5.17 % to 5.98 %.

a-Si/c-Si Solar Cells: Effect of Preparation and Processing Techniques on the Photovoltaic Properties

1996 ◽  
Vol 426 ◽  
Author(s):  
B. Jagannathan ◽  
W. A. Anderson
Keyword(s):  
Solar Cells ◽  
Carrier Transport ◽  
Crystalline Silicon ◽  
Spectral Response ◽  
Short Circuit ◽  
Short Circuit Current ◽  
Short Circuit Current Density ◽  
Photovoltaic Properties ◽  
Si Solar Cells ◽  
Processing Techniques

AbstractThe photovoltaic (PV) properties of undoped amorphous silicon (a-Si)/ p-type crystalline silicon (c-Si) solar cells were found to improve by a hydrofluoric acid treatment of c-Si just prior to glow discharge deposition of a-Si. The short circuit current density (Jsc) improved from 2.7 to 23.5 mA/cm2 for an 0.1 μm thick a-Si layer. This also resulted in an improved spectral response of the solar cell in the violet region of the spectrum. The enhanced properties have been attributed to the improved carrier transport across the interface, as seen in the current-voltage-temperature relationships, and also PC-1D simulation of the devices. Solar cells of a similar type were also fabricated by dc magnetron sputtering of the a-Si layer. HF passivated cells (area ∼ 0.24 cm2) yielded about 9.5 % efficiency with Jsc of 30 mA/cm2 and a FF of 0.6, without use of an A/R coating. The variation of the PV properties of these cells was investigated as a function of a-Si thickness and c-Si doping.

Determining the exciton diffusion length of copper phthalocyanine in operating planar-heterojunction organic solar cells

2020 ◽  
Vol 89 (3) ◽  
pp. 30201 ◽  
Author(s):  
Xi Guan ◽  
Shiyu Wang ◽  
Wenxing Liu ◽  
Dashan Qin ◽  
Dayan Ban
Keyword(s):  
Solar Cells ◽  
Organic Solar Cells ◽  
Diffusion Length ◽  
Copper Phthalocyanine ◽  
Short Circuit ◽  
Thick Layer ◽  
Short Circuit Current ◽  
Short Circuit Current Density ◽  
Exciton Diffusion ◽  
Exciton Diffusion Length

Organic solar cells based on planar copper phthalocyanine (CuPc)/C60 heterojunction have been characterized, in which a 2 nm-thick layer of bathocuproine (BCP) is inserted into the CuPc layer. The thin layer of BCP allows hole current to tunnel it through but blocks the exciton diffusion, thereby altering the steady-state exciton profile in the CuPc zone (zone 1) sandwiched between BCP and C60. The short-circuit current density (JSC) of device is limited by the hole-exciton scattering effect at the BCP/CuPc (zone 1) interface. Based on the variation of JSC with the width of zone 1, the exciton diffusion length of CuPc is deduced to be 12.5–15 nm. The current research provides an easy and helpful method to determine the exciton diffusion lengths of organic electron donors.

scholarly journals The Influence of the Thickness of Compact TiO2 Electron Transport Layer on the Performance of Planar CH3NH3PbI3 Perovskite Solar Cells

Materials ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3295
Author(s):  
Andrzej Sławek ◽  
Zbigniew Starowicz ◽  
Marek Lipiński
Keyword(s):  
Solar Cells ◽  
Electron Transport ◽  
Short Circuit ◽  
Photovoltaic Performance ◽  
Perovskite Solar Cells ◽  
Precursor Solution ◽  
Short Circuit Current ◽  
Short Circuit Current Density ◽  
Transport Layer ◽  
Electron Transport Layer

In recent years, lead halide perovskites have attracted considerable attention from the scientific community due to their exceptional properties and fast-growing enhancement for solar energy harvesting efficiency. One of the fundamental aspects of the architecture of perovskite-based solar cells (PSCs) is the electron transport layer (ETL), which also acts as a barrier for holes. In this work, the influence of compact TiO2 ETL on the performance of planar heterojunction solar cells based on CH3NH3PbI3 perovskite was investigated. ETLs were deposited on fluorine-doped tin oxide (FTO) substrates from a titanium diisopropoxide bis(acetylacetonate) precursor solution using the spin-coating method with changing precursor concentration and centrifugation speed. It was found that the thickness and continuity of ETLs, investigated between 0 and 124 nm, strongly affect the photovoltaic performance of PSCs, in particular short-circuit current density (JSC). Optical and topographic properties of the compact TiO2 layers were investigated as well.

scholarly journals CdTe-Based Thin Film Solar Cells: Past, Present and Future

Energies ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1684
Author(s):  
Alessandro Romeo ◽  
Elisa Artegiani
Keyword(s):  
Thin Film ◽  
Solar Cells ◽  
Solar Cell ◽  
Short Circuit ◽  
Short Circuit Current ◽  
Short Circuit Current Density ◽  
Open Circuit ◽  
Early Years ◽  
Solar Cell Efficiency ◽  
Cell Efficiency

CdTe is a very robust and chemically stable material and for this reason its related solar cell thin film photovoltaic technology is now the only thin film technology in the first 10 top producers in the world. CdTe has an optimum band gap for the Schockley-Queisser limit and could deliver very high efficiencies as single junction device of more than 32%, with an open circuit voltage of 1 V and a short circuit current density exceeding 30 mA/cm2. CdTe solar cells were introduced at the beginning of the 70s and they have been studied and implemented particularly in the last 30 years. The strong improvement in efficiency in the last 5 years was obtained by a new redesign of the CdTe solar cell device reaching a single solar cell efficiency of 22.1% and a module efficiency of 19%. In this paper we describe the fabrication process following the history of the solar cell as it was developed in the early years up to the latest development and changes. Moreover the paper also presents future possible alternative absorbers and discusses the only apparently controversial environmental impacts of this fantastic technology.

scholarly journals Ultrathin Cu(In,Ga)Se2 Solar Cells with Ag/AlOx Passivating Back Reflector

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4268
Author(s):  
Jessica de Wild ◽  
Gizem Birant ◽  
Guy Brammertz ◽  
Marc Meuris ◽  
Jef Poortmans ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Solar Cells ◽  
Short Circuit ◽  
Short Circuit Current ◽  
Short Circuit Current Density ◽  
Open Circuit ◽  
Electron Microscopic ◽  
Current Increase ◽  
Time Resolved ◽  
Cigs Solar Cells

Ultrathin Cu(In,Ga)Se2 (CIGS) absorber layers of 550 nm were grown on Ag/AlOx stacks. The addition of the stack resulted in solar cells with improved fill factor, open circuit voltage and short circuit current density. The efficiency was increased from 7% to almost 12%. Photoluminescence (PL) and time resolved PL were improved, which was attributed to the passivating properties of AlOx. A current increase of almost 2 mA/cm2 was measured, due to increased light scattering and surface roughness. With time of flight—secondary ion mass spectroscopy, the elemental profiles were measured. It was found that the Ag is incorporated through the whole CIGS layer. Secondary electron microscopic images of the Mo back revealed residuals of the Ag/AlOx stack, which was confirmed by energy dispersive X-ray spectroscopy measurements. It is assumed to induce the increased surface roughness and scattering properties. At the front, large stains are visible for the cells with the Ag/AlOx back contact. An ammonia sulfide etching step was therefore applied on the bare absorber improving the efficiency further to 11.7%. It shows the potential of utilizing an Ag/AlOx stack at the back to improve both electrical and optical properties of ultrathin CIGS solar cells.

scholarly journals Effects of Different Doping Ratio of Cu Doped CdS on QDSCs Performance

2015 ◽  
Vol 2015 ◽  
pp. 1-4
Author(s):  
Xiaojun Zhu ◽  
Xiaoping Zou ◽  
Hongquan Zhou
Keyword(s):  
Solar Cells ◽  
Quantum Dot ◽  
Short Circuit ◽  
Short Circuit Current ◽  
Short Circuit Current Density ◽  
Open Circuit ◽  
Photoelectric Conversion Efficiency ◽  
Photoelectric Conversion ◽  
Sensitized Solar Cells ◽  
Doping Ratio

We use the successive ionic layer adsorption and reaction (SILAR) method for the preparation of quantum dot sensitized solar cells, to improve the performance of solar cells by doping quantum dots. We tested the UV-Vis absorption spectrum of undoped CdS QDSCs and Cu doped CdS QDSCs with different doping ratios. The doping ratios of copper were 1 : 100, 1 : 500, and 1 : 1000, respectively. The experimental results show that, under the same SILAR cycle number, Cu doped CdS quantum dot sensitized solar cells have higher open circuit voltage, short circuit current density photoelectric conversion efficiency than undoped CdS quantum dots sensitized solar cells. Refinement of Cu doping ratio are 1 : 10, 1 : 100, 1 : 200, 1 : 500, and 1 : 1000. When the proportion of Cu and CdS is 1 : 10, all the parameters of the QDSCs reach the minimum value, and, with the decrease of the proportion, the short circuit current density, open circuit voltage, and the photoelectric conversion efficiency are all increased. When proportion is 1 : 500, all parameters reach the maximum values. While with further reduction of the doping ratio of Cu, the parameters of QDSCs have a decline tendency. The results showed that, in a certain range, the lower the doping ratio of Cu, the better the performance of quantum dot sensitized solar cell.

scholarly journals SCAPS Simulation on P3HT:Graphene Nanocomposites Based Bulk-Heterojunction Organic Solar Cells

2019 ◽  
Vol 9 (1) ◽  
pp. 28
Author(s):  
Nur Shakina Mohd Shariff ◽  
Puteri Sarah Mohamad Saad ◽  
Mohamad Rusop Mahmood
Keyword(s):  
Solar Cells ◽  
Organic Solar Cells ◽  
Fill Factor ◽  
Bulk Heterojunction ◽  
Short Circuit ◽  
Short Circuit Current ◽  
Short Circuit Current Density ◽  
Open Circuit ◽  
Simulation Software ◽  
Capacitance Voltage

There has been an increasing interest towards organic solar cells after the discovery of conjugated polymer and bulk-heterojunction concept. Eventhough organic solar cells are less expensive than inorganic solar cells but the power conversion energy is still considered low. The main objective of this research is to investigate the effect of the P3HT’s thickness and concentration towards the efficiency of the P3HT:Graphene solar cells. A simulation software that is specialize for photovoltaic called SCAPS is used in this research to simulate the effect on the solar cells. The solar cell’s structure will be drawn inside the simulation and the parameters for each layers is inserted. The result such as the open circuit voltage (Voc), short circuit current density (Jsc), fill factor (FF), efficiency (η), capacitance-voltage (C-V) and capacitance-frequency (C-f) characteristic will be calculated by the software and all the results will be put into one graph.

Sign in / Sign up

Export Citation Format

Share Document