scholarly journals Mechanical Properties and Weathering Behavior of Polypropylene-Hemp Shives Composites

2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
Marcel Ionel Popa ◽  
Silvia Pernevan ◽  
Cecilia Sirghie ◽  
Iuliana Spiridon ◽  
Dorina Chambre ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Chemical Degradation ◽  
Accelerated Weathering ◽  
Ir And Raman Spectroscopies ◽  
Before And After ◽  
Ft Ir ◽  
Main Components ◽  
Poly Propylene ◽  
Ir And Raman

This paper presents the obtaining and the characterization of composites with polypropylene matrix and hemp shives as filler in different ratios and containing poly(propylene)-co maleic anhydride (MAH-PP) 3% wt as compatibility agent. The weathering behavior of the composite enclosing 60% hemp shives, performed after the exposure to UV radiations at different exposure times, was evaluated. The changes in the chemical and morphological structures were investigated by FT-IR and RAMAN spectroscopies and AFM microscopy. The mechanical characteristics of the composites were determined before and after an artificial aging process, and they are within the limits of the values reported for polyolefin-based composites and materials with natural fillers. During the accelerated weathering process, the correlation between the chemical degradation of the main components of the composite and the modification of the mechanical properties after the process of aging has been observed.

scholarly journals Tuning the Activity of a Hybrid Polymer–Oxocluster Catalyst: A Composition—Selectivity Correlation

Polymers ◽  
2021 ◽  
Vol 13 (19) ◽  
pp. 3268
Author(s):  
Giulia Bragaggia ◽  
Anna Beghetto ◽  
Ferdinando Bassato ◽  
Rudi Reichenbächer ◽  
Paolo Dolcet ◽  
...  
Keyword(s):  
Solid State Nmr ◽  
Hydrolytic Stability ◽  
Polymeric Materials ◽  
Acrylic Polymers ◽  
X Ray ◽  
Ir And Raman Spectroscopies ◽  
Before And After ◽  
Ft Ir ◽  
X Ray Absorption ◽  
Ir And Raman

Zr-based oxoclusters MxOy(OR)w(OOR’)z are promising catalysts for the activation of hydrogen peroxide. However, they need to be integrated into suitable matrices to increase their hydrolytic stability and allow for their recovery after use. Polymeric materials can be successfully employed for this aim, since they modify the properties of the resulting hybrid materials, in terms of polarity and chemical affinity for the substrates, improving the catalytic activity. Herein, we report the synthesis of different acrylic polymers based on various co-monomers (methyl methacrylate (MMA), 2,2,2-trifluoroethylmethacrylate (TFMA) and 3-methacryloxypropyltrimethoxylsilane (MAPTMS)) covalently cross-linked by a Zr4-based oxocluster, whose composition was tuned to optimise the catalytic oxidation of methyl p-tolyl sulphide. To assess their properties and stability, the materials were characterised via Fourier Transform Infrared (FT-IR) and Raman spectroscopies, Thermogravimetric Analysis (TGA), Solid-State NMR (SS-NMR) and X-Ray Absorption Spectroscopies XAS, before and after catalytic turnover.

scholarly journals Fast Preparation of High-Performance Wood Materials Assisted by Ultrasonic and Vacuum Impregnation

Forests ◽  
2021 ◽  
Vol 12 (5) ◽  
pp. 567
Author(s):  
Hong Yang ◽  
Mingyu Gao ◽  
Jinxin Wang ◽  
Hongbo Mu ◽  
Dawei Qi
Keyword(s):  
Mechanical Properties ◽  
High Performance ◽  
Mechanical Tests ◽  
Vacuum Impregnation ◽  
Natural Forests ◽  
Ultrasonic Pretreatment ◽  
Fast Growing ◽  
Before And After ◽  
New Material ◽  
Ft Ir

In the absence of high-quality hardwood timber resources, we have gradually turned our attention from natural forests to planted fast-growing forests. However, fast-growing tree timber in general has defects such as low wood density, loose texture, and poor mechanical properties. Therefore, improving the performance of wood through efficient and rapid technological processes and increasing the utilization of inferior wood is a good way to extend the use of wood. Densification of wood increases the strength of low-density wood and extends the range of applications for wood and wood-derived products. In this paper, the effects of ultrasonic and vacuum pretreatment on the properties of high-performance wood were explored by combining sonication, vacuum impregnation, chemical softening, and thermomechanical treatments to densify the wood; then, the changes in the chemical composition, microstructure, and mechanical properties of poplar wood before and after treatment were analyzed comparatively by FT-IR, XRD, SEM, and mechanical tests. The results showed that with ultrasonic pretreatment and vacuum impregnation, the compression ratio of high-performance wood reached its highest level and the MOR and MOE reached their maximums. With the help of this method, fast-growing softwoods can be easily prepared into dense wood materials, and it is hoped that this new material can be applied in the fields of construction, aviation, and automobile manufacturing.

scholarly journals Porcelain enamel coatings, from the past to the future: solved and unsolved issues for the improvement of their mechanical properties.

2020 ◽  
Author(s):  
Stefano Rossi ◽  
Francesca Russo
Keyword(s):  
Mechanical Properties ◽  
Industrial Revolution ◽  
Chemical Degradation ◽  
Protective Properties ◽  
The Past ◽  
Enhanced Resistance ◽  
Mechanical Study ◽  
The Future ◽  
Ancient Times

Porcelain enamel coatings have their origins in ancient times when they were mainly used for decorative and ornamental purposes. From the industrial revolution onwards, these coatings have started to be used also as functional layers, ranging from home applications up to the use in high-technological fields, such as in chemical reactors. The excellent properties of enamel coatings, such as fire resistance, protection of the substrate from corrosion, resistance to atmospheric and chemical degradation, mainly depend and originate from the glassy nature of the enamel matrix itself. On the other side, the vitreous nature of enamel coatings limits their application in many fields, where mechanical stress and heavy abrasion phenomena could lead to nucleation and propagation of cracks inside the material, thus negatively affecting the protective properties of this coating. Many efforts have been made to improve the abrasion resistance of enamelled materials. On this regard, researchers showed encouraging results and proposed many different improvement approaches. Now it is possible to obtain enamels with enhanced resistance to abrasion. Differently, the investigation of the mechanical properties of enamel coatings remains a poorly studied topic. In the literature, there are interesting methodological ideas, which could be successfully applied to the mechanical study of enamelled materials and could allow to have further insights on their behaviour. Thus, the path that should be followed in the future includes the mechanical characterization of these coatings and the search for new solutions to address their brittle behaviour.

scholarly journals Sonochemical-assisted magnesium borate synthesis from different boron sources

2017 ◽  
Vol 19 (1) ◽  
pp. 81-88 ◽  
Author(s):  
Meral Yildirim ◽  
Azmi Seyhun Kipcak ◽  
Emek Moroydor Derun
Keyword(s):  
High Efficiency ◽  
Synthesis Method ◽  
Spectroscopic Studies ◽  
X Ray Diffraction ◽  
Magnesium Borate ◽  
Ir And Raman Spectroscopies ◽  
Ft Ir ◽  
Surface Morphologies ◽  
Ir And Raman ◽  
Good Agreement

Abstract In this study, sonochemical-assisted magnesium borate synthesis is studied from different boron sources. Various reaction parameters are successfully applied by a simple and green method. X-ray diffraction (XRD), Fourier transform infrared (FT-IR) and Raman spectroscopies are used to characterize the synthesized magnesium borates on the other hand surface morphologies are investigated by using scanning electron microscope (SEM). The XRD analyses showed that the products were admontite [MgO(B2O3)3 · 7(H2O)] with JCPDS (Joint Committee on Powder Diffraction Standards) no. of 01-076-0540 and mcallisterite [Mg2(B6O7(OH)6)2 · 9(H2O)] with JCPDS no. of 01-070-1902. The results that found in the spectroscopic studies were in a good agreement with characteristic magnesium borate bands in both regions of infra-red and visible. According to SEM results, obtained borates were in micro and sub-micro scales. By the use of ultrasonication, reaction yields were found between 84.2 and 97.9%. As a result, it is concluded that the sonochemical approach is a practicable synthesis method to get high efficiency and high crystallinity in the synthesis magnesium borate compounds.

scholarly journals Effects of Graphene Oxide on the Structure and Properties of Regenerated Wool Keratin Films

Polymers ◽  
2018 ◽  
Vol 10 (12) ◽  
pp. 1318 ◽  
Author(s):  
Bo Li ◽  
Jinbo Yao ◽  
Jiarong Niu ◽  
Jianyong Liu ◽  
Le Wang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Graphene Oxide ◽  
Polyacrylamide Gel Electrophoresis ◽  
Sodium Dodecyl ◽  
Test Results ◽  
Chemical Methods ◽  
Sds Page ◽  
Mechanism Of Interaction ◽  
Ft Ir ◽  
Ir And Raman

Much research has focused on improvement of the structural and mechanical properties of regenerated keratin materials by physical or chemical methods in recent years. In this research, regenerated keratin materials were modified with graphene oxide (GO). The properties of modified keratin films and the mechanism of interaction between GO and keratin macromolecules were studied. The SEM and XRD test results showed that the orientation of keratin macromolecules could be effectively improved by GO, which favored improvement of the keratin material’s crystallinity and made the films more uniform and compact. The thermal stability and mechanical properties of GO-modified keratin films were also improved significantly. At the same time, the reaction mechanism between keratin and GO materials was analyzed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE), FT-IR, and Raman spectroscopy. It was shown that there was no chemical reaction between GO and keratin molecules, and the interaction between them was mainly via hydrogen bonding and van der Waals forces.

scholarly journals Synthesis and Characterization of PLA-Micro-structured Hydroxyapatite Composite Films

Materials ◽  
2020 ◽  
Vol 13 (2) ◽  
pp. 274 ◽  
Author(s):  
Andreea Madalina Pandele ◽  
Andreea Constantinescu ◽  
Ionut Cristian Radu ◽  
Florin Miculescu ◽  
Stefan Ioan Voicu ◽  
...  
Keyword(s):  
Composite Films ◽  
Synthesis Method ◽  
Polymer Chains ◽  
Force Microscopy ◽  
Degradation Temperature ◽  
Atomic Force ◽  
Hydroxyapatite Composite ◽  
Ft Ir ◽  
Ir And Raman

This article presents a facile synthesis method used to obtain new composite films based on polylactic acid and micro-structured hydroxyapatite particles. The composite films were synthesized starting from a polymeric solution in chloroform (12 wt.%) in which various concentrations of hydroxyapatite (1, 2, and 4 wt.% related to polymer) were homogenously dispersed using ultrasonication followed by solvent evaporation. The synthesized composite films were morphologically (through SEM and atomic force microscopy (AFM)) and structurally (through FT-IR and Raman spectroscopy) characterized. The thermal behavior of the composite films was also determined. The SEM and AFM analyses showed the presence of micro-structured hydroxyapatite particles in the film’s structure, as well as changes in the surface morphology. There was a significant decrease in the crystallinity of the composite films compared to the pure polymer, this being explained by a decrease in the arrangement of the polymer chains and a concurrent increase in the degree of their clutter. The presence of hydroxyapatite crystals did not have a significant influence on the degradation temperature of the composite film.

Investigation of a Collagen-Chitosan-Hydroxyapatite System for Novel Bone Substitutes

2007 ◽  
Vol 330-332 ◽  
pp. 415-418 ◽  
Author(s):  
Xiao Liang Wang ◽  
Xu Dong Li ◽  
Xiao Min Wang ◽  
Jian Lu ◽  
Hui Chuan Zhao ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Bone Substitutes ◽  
Nano Materials ◽  
Natural Polymers ◽  
Uniform Dispersion ◽  
Obvious Phase Separation ◽  
Ft Ir ◽  
Main Components

Collagen (Col) and chitosan (Chi) are both natural polymers and have received extensive investigation in recent years in the field of tissue engineering, but there are few reports on the introduction of hydroxyapatite (HA) into the Col-Ch system. In this study, based on the miscibility of these two polymers under proper condition, hydroxyapatite (HA) was synthesis in the Col-Chi system by in-situ co-precipitate method to give rise to a novel nanocomposite. The structural characterization of such Col-Ch-HA nano-materials was carried out by using FT-IR, XRD, SEM and TGA analyses with main components and Col-Chi samples used for comparison. It was found that there exist interactions between Col and Chi molecules. The nucleation and growth of inorganic phase occurs in the Col-Chi system and final products are uniform dispersion of nano-sized HA in the Col-Chi network without obvious phase separation. This novel nanocomposite would be a promising material for bone tissue engineering.

Synthesis and Characterization of Li(Li0.05Ni0.6Fe0.1Mn0.25)O2 Cathode Material for Lithim Ion Batteries

2018 ◽  
Vol 21 (1) ◽  
pp. 051-056
Author(s):  
A. Nichelson ◽  
S. Thanikaikarasan ◽  
K. Karuppasamy ◽  
S. Karthickprabhu ◽  
T. Mahalingam ◽  
...  
Keyword(s):  
Cathode Material ◽  
Sol Gel ◽  
Lithium Ion ◽  
Chelating Agent ◽  
X Ray Diffraction ◽  
Morphological Studies ◽  
New Type ◽  
Ft Ir ◽  
Ir And Raman

A new type of lithium enriched cathode material Li (Li0.05Ni0.6Fe0.1Mn0.25)O2 was synthesized by sol-gel method with citric acid as a chelating agent. The structural and morphological studies were systematically investigated through X-ray diffraction, SEM with EDS, FT-IR and Raman analyses. The crystallite size of the Li (Li0.05Ni0.6Fe0.1Mn0.25)O2 cathode material was found to be 45 nm thereby leads to the feasible movement of lithium ion all through the material. FT-IR spectroscopy was used to confirm the metal-oxygen interaction in the prepared cathode material. The electrical properties of the Li (Li0.05Ni0.6Fe0.1Mn0.25)O2 cathode material were studied by impedance and dielectric spectral analyzes. Li (Li0.05Ni0.6Fe0.1Mn0.25)O2 showed a maximum ionic conductivity of 10-6 S/cm at ambient temperature.

Sign in / Sign up

Export Citation Format

Share Document