scholarly journals Interlayer Structure of Bioactive Molecule, 2-Aminoethanesulfonate, Intercalated into Calcium-Containing Layered Double Hydroxides

2012 ◽  
Vol 2012 ◽  
pp. 1-7 ◽  
Author(s):  
Tae-Hyun Kim ◽  
Hyoung Jun Kim ◽  
Jae-Min Oh
Keyword(s):  
Layered Double Hydroxides ◽  
Solid Phase ◽  
X Ray Diffraction ◽  
X Ray ◽  
Calcium Cation ◽  
Particle Size And Morphology ◽  
Interlayer Structure ◽  
Diffraction Patterns ◽  
Size And Morphology ◽  
Double Hydroxides

We have successfully intercalated 2-aminoethanesulfonate, a well-known biomolecule taurine, into calcium-containing layered double hydroxides via optimized solid phase intercalation. According to X-ray diffraction patterns and infrared spectroscopy, it was revealed that the intercalated taurine molecules were each directly coordinated to other calcium cation and arranged in a zig-zag pattern. Scanning electron microscopy showed that the particle size and morphology of the LDHs were not affected by the solid phase intercalation, and the surface of intercalates was covered by organic moieties. From ninhydrin amine detection tests, we confirmed that most of the taurine molecules were well stabilized between the calcium-containing LDH layers.

scholarly journals Dataset on infrared spectroscopy and X-ray diffraction patterns of Mg–Al layered double hydroxides by the electrocoagulation technique

Data in Brief ◽  
2019 ◽  
Vol 27 ◽  
pp. 104564
Author(s):  
Marena Molano-Mendoza ◽  
Dayana Donneys-Victoria ◽  
Nilson Marriaga-Cabrales ◽  
Miguel Angel Mueses ◽  
Gianluca Li Puma ◽  
...  
Keyword(s):  
Infrared Spectroscopy ◽  
Layered Double Hydroxides ◽  
X Ray Diffraction ◽  
X Ray ◽  
Diffraction Patterns ◽  
Double Hydroxides

Thermal evolution of Mg–Al and Ni–Al layered double hydroxides: the structure of the dehydrated phase

2016 ◽  
Vol 72 (6) ◽  
pp. 651-659 ◽  
Author(s):  
Svetlana Cherepanova ◽  
Natalya Leont'eva ◽  
Vladimir Drozdov ◽  
Vladimir Doronin
Keyword(s):  
Layered Double Hydroxides ◽  
Thermal Evolution ◽  
Water Molecules ◽  
Initial Structure ◽  
X Ray Diffraction ◽  
One Dimensional ◽  
X Ray ◽  
Turbostratic Disorder ◽  
Diffraction Patterns ◽  
Double Hydroxides

Simulation of X-ray diffraction patterns on the basis of the models of one-dimensional disordered crystals was used to investigate the structure of the dehydrated phase produced by dehydration of Mg–Al and Ni–Al layered double hydroxides at a temperature of ∼473–498 K. It was found that the removal of water molecules transforms the initial structure, which is a mixture of 3R1and 2H1polytypes, into a structure that comprises preferentially fragments of 3R2and 1Hpolytypes and has some turbostratic disorder.

scholarly journals Photocatalytic Degradation of 2,4,6-Trichlorophenol by MgO–MgFe2O4 Derived from Layered Double Hydroxide Structures

Catalysts ◽  
2019 ◽  
Vol 9 (5) ◽  
pp. 454 ◽  
Author(s):  
Esthela Ramos-Ramírez ◽  
Francisco Tzompantzi-Morales ◽  
Norma Gutiérrez-Ortega ◽  
Héctor G. Mojica-Calvillo ◽  
Julio Castillo-Rodríguez
Keyword(s):  
Photocatalytic Degradation ◽  
Layered Double Hydroxides ◽  
X Ray Diffraction ◽  
Application Study ◽  
Toxic Compounds ◽  
X Ray ◽  
Thermally Activated ◽  
Double Hydroxide ◽  
Double Hydroxides ◽  
Scanning Electron

In recent years, the search for solutions for the treatment of water pollution by toxic compounds such as phenols and chlorophenols has been increasing. Phenols and their derivatives are widely used in the manufacture of pesticides, insecticides, paper, and wood preservers, among other things. Chlorophenols are partially biodegradable but not directly photodegradable by sunlight and are extremely toxic—especially 2,4,6-trichlorophenol, which is considered to be potentially carcinogenic. As a viable proposal to be applied in the treatment of water contaminated with 2,4,6-trichlorophenol, this paper presents an application study of the thermally activated Mg/Fe layered double hydroxides as photocatalysts for the mineralization of this contaminant. Activated Mg/Fe layered double hydroxides were characterized by X-ray diffraction, thermal analysis, N2 physisorption, and scanning electron microscopy with X-ray dispersive energy. The results of the photocatalytic degradation of 2,4,6-trichlorophenol in aqueous solution showed good photocatalytic activity, with an efficiency of degradation of up to 93% and mineralization of 82%; degradation values which are higher than that of TiO2-P25, which only reached 18% degradation. The degradation capacity is attributed to the structure of the MgO–MgFe2O4 oxides derived from double laminate hydroxide Mg/Fe. A path of degradation based on a mechanism of superoxide and hollow radicals is proposed.

Synthesis and properties of double gadolinium tellurites

2021 ◽  
Vol 103 (3) ◽  
pp. 67-73
Author(s):  
A.A. Toibek ◽  
◽  
K.T. Rustembekov ◽  
D.A. Kaikenov ◽  
M. Stoev ◽  
...  
Keyword(s):  
Phase Analysis ◽  
Solid Phase ◽  
Heat Capacities ◽  
Ceramic Technology ◽  
Phase Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Cell Parameters ◽  
Temperature Range ◽  
Diffraction Patterns

For the first time, double gadolinium tellurites of the composition GdMIITeO4.5 (MII — Sr, Ba) were synthesized by the solid-phase method. The solid-phase synthesis of samples was carried out from decrepitated gadolinium (III) and tellurium (IV) oxides, strontium, and barium carbonates according to the standard ceramic technology. The synthesis was carried out in the temperature range of 800-1100 °C. The samples obtained were confirmed by X-ray phase analysis. X-ray phase analysis was carried out on an Empyrean instrument in the XRDML Pananalitical format. The intensity of the diffraction maxima was estimated on a 100-point scale. X-ray diffraction patterns indexing of the powder of gadolinium tellurites — alkaline earth metals studied were carried out by the homology method. The reliability and correctness of the results of indexing the X-ray diffraction patterns are confirmed by the good agreement between the experimental and calculated values of the interplanar distances (d) and the agreement between the values of the X-ray and pycnometric densities. It was found that compounds GdSrTeO4.5 and GdBaTeO4.5 crystallize in the monoclinic system and have the unit cell parameters, namely GdSrTeO4.5 — a = 12.7610, b = 10.4289, c = 8.6235 Å, V° = 1141.83 Å3, β = 95.77°, Z = 5, ρrent. = 3.22, ρpikn. = (3.10±0.09) g/cm3; GdBaTeO4.5 — a = 15.7272, b = 15.8351, c = 7.1393 Å, V° = 1769.72 Å3, β = 95.53°, Z = 8, ρrent = 3.71, ρpick = (3.61±0.10) g/cm3. Using the Landiya method, the standard heat capacities of the compounds were estimated from the calculated values of the standard entropies, and the temperature dependences of the heat capacities of the gadolinium tellurites synthesized were determined in the temperature range of 298–850 K.

scholarly journals High efficient photocatalytic activity of Zn-Al-Ti layered double hydroxides nanocomposite

2018 ◽  
Vol 149 ◽  
pp. 01087 ◽  
Author(s):  
F. Amor ◽  
A. Diouri ◽  
I. Ellouzi ◽  
F. Ouanji ◽  
M. Kacimi
Keyword(s):  
Methylene Blue ◽  
Photocatalytic Activity ◽  
Uv Irradiation ◽  
Layered Double Hydroxides ◽  
Removal Rate ◽  
X Ray Diffraction ◽  
Simple Method ◽  
X Ray ◽  
High Efficient ◽  
Double Hydroxides

This work establishes a simple method for synthesising layered double hydroxides (LDHs) powders with coprecipitation. The characteristics of the samples were investigated y X-ray diffraction (XRD), scanning electron microscopy (SEM) and spectrophotometer UV–Vis (DRS). Non-uniform distribution was shown for LDHs samples by SEM. Photocatalytic efficiencies were tested using methylene blue (MB) dye as a model contaminant under UV irradiation. In particular, Zn–Al-Ti LDH exhibited an excellent performance towards MB degradation compared with commercial TiO2 nanoparticles. Methylene blue removal percentage was reached at almost 100%, whereas commercial TiO2 reached a removal rate of only 66% under the same conditions within 20 min. The aim of the current work is to prepare Zn-Al-Ti layered double hydroxides nanocomposite and to evaluate their photocatalytic activity in the removal of methylene blue under UV irradiation.

scholarly journals Designing Magnetic Layered Double Hydroxides and Two-Dimensional Magnetic Nano-Nets of Cobalt Ferrite through a Novel Approach

2018 ◽  
Vol 8 (11) ◽  
pp. 2099 ◽  
Author(s):  
Osama Saber ◽  
Abdullah Aljaafari ◽  
Sarah Asiri ◽  
Khalid Batoo
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Layered Double Hydroxides ◽  
Cobalt Ferrite ◽  
High Coercivity ◽  
Two Dimensional ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Double Hydroxides

The present study has a dual aim of supporting magnetic nanoparticles over the nanolayers of LDHs and designing two-dimensional magnetic nano-nets of cobalt ferrite. In this trend, nanoparticles of CoFe2O4 were prepared and supported by Co-Fe LDH through urea hydrolysis. The nanolayered structures of Co-Fe LDH were confirmed by X-ray diffraction, energy-dispersive X-ray spectrometry, FT-IR spectra, thermal analyses, and transmission electron microscopy. In addition, they indicated that 13.2% CoFe2O4 were supported over Co-Fe LDH. Transformation of the nanolayered structures of Co-Fe LDH to nano-nets was achieved by the catalytic effect of the supported CoFe2O4 nanoparticles through solvent thermal technique. X-ray diffraction patterns and transmission electron microscopy images confirmed the transformation of the supported Co-Fe LDH to nano-nets of cobalt ferrite. In order to indicate the effect of the LDH for designing the nano-nets, nanoparticles of cobalt ferrite were prepared by the same technique without LDH. The magnetic behavior of the nano-nets and the supported Co-Fe LDH were measured and compared with the nanoparticles through vibrating sample magnetometer technique. The magnetic parameters indicated that the prepared nano-nets have ferromagnetic behavior and high coercivity. However, the prepared nanoparticles revealed a superparamagnetic state and low coercivity. The experimental results concluded that the incorporation of nanoparticles with nanowires into nano-net structures has been found to be an efficient way to improve their magnetic properties and prevent their agglomerations. Finally, layered double hydroxides are an important source for constructing magnetic nanolayered structures and nano-nets.

Probing the thermal decomposition process of layered double hydroxides through in situ 57Fe Mössbauer and in situ X-ray diffraction experiments

2006 ◽  
Vol 42 (2) ◽  
pp. 534-538 ◽  
Author(s):  
Daniel X. Gouveia ◽  
Odair P. Ferreira ◽  
Antonio G. Souza Filho ◽  
M. G. da Silva ◽  
J. A. C. de Paiva ◽  
...  
Keyword(s):  
Thermal Decomposition ◽  
Layered Double Hydroxides ◽  
Decomposition Process ◽  
X Ray Diffraction ◽  
Thermal Decomposition Process ◽  
X Ray ◽  
57Fe Mössbauer ◽  
Double Hydroxides

Preparation of Exfoliated Polyethylene/Clay Nanocomposites at High Clay Content

2010 ◽  
Vol 150-151 ◽  
pp. 561-564
Author(s):  
Hao Qun Hong ◽  
Hai Yan Zhang ◽  
Hui He ◽  
De Min Jia
Keyword(s):  
Solid Phase ◽  
Clay Content ◽  
Layered Silicates ◽  
Clay Nanocomposites ◽  
Melt Blending ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Diffraction Patterns ◽  
High Polarity

The polyethylene/montmorillonite (PE/MMT) nanocomposites were prepared by melt blending the organic MMT with the ternary-monomer graft copolymers of polyethylene (GPE) which were prepared by solid phase grafting maleic anhydride, methyl methacrylate and butyl acrylate onto PE. Fourier transform infrared spectroscopy was used to characterize the structure of GPE. X-ray diffraction patterns and transmission electron microscopy were used to characterize the morphology of GPE/MMT nanocomposites. Results showed that GPE was an outstanding polymeric material to prepare an exfoliated polymer/layered silicates nanocomposites due to the high polarity of GPE and high graft degree. Most layered silicates still maintain the exfoliated and well dispersed state even at 40 phr OMMT content. The exfoliation of layered silicates was attributed to the well intercalation and easy wetting of the grafted oligomers.

Solvothermal Synthesis and Characterization of Lithium Tantalate Nanoparticles

2014 ◽  
Vol 602-603 ◽  
pp. 19-22 ◽  
Author(s):  
Lin Qiang Gao ◽  
Hai Yan Chen ◽  
Zhen Wang ◽  
Xin Zou
Keyword(s):  
Electron Microscopy ◽  
Solvothermal Synthesis ◽  
Room Temperature ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Particle Size And Morphology ◽  
Size And Morphology

Nanoscale LiTaO3 powders with perovskite structure were synthesized using the solvothermal technique with glycol as solvent at 240°C for 12h. The powders were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM). XRD was used to elucidate room temperature structures using Rietveld refinement. The powders were pure single pervoskite phase with high crystallinity. FESEM and TEM were used to determine particle size and morphology. The average LiTaO3 grain size was estimated to be < 200nm, and TEM images indicated that LiTaO3 particles had a brick-like morphology. In addition, the effect of the temperature on the LiTaO3 power characterisitics was also detailed studied.

Sign in / Sign up

Export Citation Format

Share Document