scholarly journals Tailoring the Composition and Properties of Sprayed CuSbS2Thin Films by Using Polymeric Additives

2012 ◽  
Vol 2012 ◽  
pp. 1-6 ◽  
Author(s):  
Ionut Popovici ◽  
Anca Duta
Keyword(s):  
Thin Films ◽  
Contact Angle ◽  
Ir Spectroscopy ◽  
Surface Energy ◽  
Hydrophilic Polymers ◽  
Film Morphology ◽  
Angle Measurements ◽  
Polymeric Additives ◽  
Contact Angle Measurements ◽  
Spray Pyrolysis Deposition

CuSbS2thin films were obtained by spray pyrolysis deposition, using polymeric additives for controlling the surface properties and film’s composition. Ternary crystalline chalcostibite compounds have been obtained without any postdeposition treatments. XRD spectra and IR spectroscopy were used to characterize films composition and interactions between components. Films morphology and surface energy were investigated using AFM microscopy and contact angle measurements. Hydrophobic and hydrophilic polymers strongly influence the composition and film morphology.

Surface Wettability Enhances Osteoblast Adhesion on Silicon-Substituted Hydroxyapatite Thin Films

2007 ◽  
Vol 330-332 ◽  
pp. 877-880 ◽  
Author(s):  
E.S. Thian ◽  
J. Huang ◽  
Serena Best ◽  
Zoe H. Barber ◽  
William Bonfield
Keyword(s):  
Thin Films ◽  
Contact Angle ◽  
Actin Filaments ◽  
Culture Study ◽  
Cell Culture Study ◽  
Angle Measurements ◽  
Contact Angle Measurements ◽  
Osteoblast Adhesion ◽  
Lower Contact

Crystalline hydroxyapatite (HA) and 0.8 wt.% silicon-substituted HA (SiHA) thin films were produced using magnetron co-sputtering. These films were subjected to contact angle measurements and in vitro cell culture study using human osteoblast-like (HOB) cells. A wettability study showed that SiHA has a lower contact angle, and thus is more hydrophilic in nature, as compared to HA. Consequently, enhanced cell growth was observed on SiHA at all time-points. Furthermore, distinct and well-developed actin filaments could be seen within HOB cells on SiHA. Thus, this work demonstrated that the surface properties of the coating may be modified by the substitution of Si into the HA structure.

Effect of electron irradiation on the Crystallite size, Grain size and Contact angle of electrodeposited Cadmium Telluride thin films

2015 ◽  
Vol 8 (2) ◽  
Author(s):  
S. A. Gangawane ◽  
V. P. Malekar ◽  
V. J. Fulari
Keyword(s):  
Thin Films ◽  
Contact Angle ◽  
Grain Size ◽  
Electron Beam Irradiation ◽  
Crystal Size ◽  
X Ray Diffraction ◽  
X Ray ◽  
Angle Measurements ◽  
Contact Angle Measurements ◽  
Cdte Thin Films

In this paper, the effects of electron beam irradiation on the CdTe thin films are studied. The CdTe thin films are characterized by X-ray diffraction (XRD), scanning electron microscope (SEM) and contact angle measurements for different bath concentration. The thin film layers are subjected to irradiation of 6 MeV electrons. Finally the effect of irradiation is correlated to crystal size, grain size and contact angle measurements of the CdTe thin films

scholarly journals Cell Morphology on Poly(methyl methacrylate) Microstructures as Function of Surface Energy

2019 ◽  
Vol 2019 ◽  
pp. 1-12
Author(s):  
Matthias Katschnig ◽  
Boris Maroh ◽  
Natascha Andraschek ◽  
Sandra Schlögl ◽  
Ulrike Zefferer ◽  
...  
Keyword(s):  
Contact Angle ◽  
Cell Adhesion ◽  
Surface Energy ◽  
Methyl Methacrylate ◽  
Cell Elongation ◽  
Cell Phenotype ◽  
Critical Surface ◽  
Poly Methyl Methacrylate ◽  
Angle Measurements ◽  
Contact Angle Measurements

Whilst the significance of substrate topography as a regulator of cell function is well established, a systematic analysis of the principles underlying this is still unavailable. Here we evaluate the hypothesis that surface energy plays a decisive role in substrate-mediated modulation of cell phenotype by evaluation of cell behaviour on synthetic microstructures exhibiting pronounced differences in surface energy. These microstructures, specifically cubes and walls, were fabricated from a biocompatible base polymer, poly(methyl methacrylate), by variotherm injection molding. The dimensions of the cubes were 1 μm x 1 μm x 1 μm (height x width x length) with a periodicity of 1:1 and 1:5 and the dimensions of the walls 1 μm x 1 μm x 15 mm (height x width x length) with a periodicity of 1:1 and 1:5. Mold inserts were made by lithography and electroplating. The surface energy of the resultant microstructures was determined by static contact angle measurements. Light scanning microscopy of the morphology of NT2/D1 and MC3T3-E1 preosteoblast cells cultured on structured PMMA samples in both cases revealed a profound surface energy dependence. “Walls” appeared to promote significant cell elongation, whilst a lack of cell adhesion was observed on “cubes” with the lowest periodicity. Contact angle measurements on walls revealed enhanced surface energy anisotropy (55 mN/m max., 10 mN/m min.) causing a lengthwise spreading of the test liquid droplet, similar to cell elongation. Surface energy measurements for cubes revealed increased isotropic hydrophobicity (87° max., H2O). A critical water contact angle of ≤ 80° appears to be necessary for adequate cell adhesion. A “switch” for cell adhesion and subsequently cell growth could therefore be applied by, for example, adjusting the periodicity of hydrophobic structures. In summary cell elongation on walls and a critical surface energy level for cell adhesion could be produced for NT2/D1 and MC3T3-E1 cells by symmetrical and asymmetrical energy barrier levels. We, furthermore, propose a water-drop model providing a common physicochemical cause regarding similar cell/droplet geometries and cell adhesion on the investigated microstructures.

Sign in / Sign up

Export Citation Format

Share Document