scholarly journals Endogenous Reactivity in a Dynamic Model of Consumer’s Choice

2012 ◽  
Vol 2012 ◽  
pp. 1-9
Author(s):  
Ahmad K. Naimzada ◽  
Fabio Tramontana
Keyword(s):  
Dynamic Model ◽  
Optimal Choice ◽  
Original Model ◽  
Rational Behavior ◽  
Learning Mechanisms ◽  
Learning Mechanism ◽  
The Stability ◽  
Consumer Model ◽  
Asymptotical Convergence ◽  
Stability Results

We move from a boundedly rational consumer model (Naimzada and Tramontana, 2008, 2010) characterized by a gradient-like decisional process in which, under particular parameters conditions, the asymptotical convergence to the optimal choice does not happen but it does under a least squared learning mechanism. In the present paper, we prove that even a less sophisticated learning mechanism leads to convergence to the rational choice and also prove that convergence is ensured when both learning mechanisms are available. The stability results that we obtain give more strength to the rational behavior assumption of the original model; in fact, the less demanding is the learning mechanism ensuring convergence to the rational behavior, the higher is the probability that even quite naive consumers will learn the composition of their optimum consumption bundles.

scholarly journals On the stability of differential-difference equations

1976 ◽  
Vol 19 (3) ◽  
pp. 358-370 ◽  
Author(s):  
R. D. Braddock ◽  
P. Van Den Driessche
Keyword(s):  
Time Delay ◽  
Linear System ◽  
Difference Equations ◽  
Local Stability ◽  
Original Model ◽  
Time Lags ◽  
Local Properties ◽  
Linear Differential ◽  
The Stability ◽  
Stability Results

AbstractThe local properties of non-linear differential-difference equations are investigated by considering the location of the roots of the eigen-equation derived from the lineraised approximation of the original model. A general linear system incorporating one time delay is considered and local stability results are obtained for cases in which the coefficient matrices satisfy certain assumptions. The results have applications to recent Biological and Economic models incorporating time lags.

Epitaxial Growth in Dislocation-Free Strained Alloy Films

2002 ◽  
Vol 715 ◽  
Author(s):  
Zhi-Feng Huang ◽  
Rashmi C. Desai
Keyword(s):  
Deposition Rate ◽  
Elastic Moduli ◽  
Composition Dependence ◽  
Critical Thickness ◽  
Lattice Misfit ◽  
Misfit Strain ◽  
Joint Stability ◽  
Alloy Films ◽  
The Stability ◽  
Stability Results

AbstractThe morphological and compositional instabilities in the heteroepitaxial strained alloy films have attracted intense interest from both experimentalists and theorists. To understand the mechanisms and properties for the generation of instabilities, we have developed a nonequilibrium, continuum model for the dislocation-free and coherent film systems. The early evolution processes of surface pro.les for both growing and postdeposition (non-growing) thin alloy films are studied through a linear stability analysis. We consider the coupling between top surface of the film and the underlying bulk, as well as the combination and interplay of different elastic effects. These e.ects are caused by filmsubstrate lattice misfit, composition dependence of film lattice constant (compositional stress), and composition dependence of both Young's and shear elastic moduli. The interplay of these factors as well as the growth temperature and deposition rate leads to rich and complicated stability results. For both the growing.lm and non-growing alloy free surface, we determine the stability conditions and diagrams for the system. These show the joint stability or instability for film morphology and compositional pro.les, as well as the asymmetry between tensile and compressive layers. The kinetic critical thickness for the onset of instability during.lm growth is also calculated, and its scaling behavior with respect to misfit strain and deposition rate determined. Our results have implications for real alloy growth systems such as SiGe and InGaAs, which agree with qualitative trends seen in recent experimental observations.

scholarly journals Analysis of dengue model with fractal-fractional Caputo–Fabrizio operator

2020 ◽  
Vol 2020 (1) ◽  
Author(s):  
Fatmawati ◽  
Muhammad Altaf Khan ◽  
Cicik Alfiniyah ◽  
Ebraheem Alzahrani
Keyword(s):  
Statistical Data ◽  
Dengue Infection ◽  
Fractional Operator ◽  
Novel Approach ◽  
Reduction Number ◽  
Best Fitting ◽  
The Stability ◽  
Parameter Values ◽  
Graphical Illustration ◽  
Stability Results

AbstractIn this work, we study the dengue dynamics with fractal-factional Caputo–Fabrizio operator. We employ real statistical data of dengue infection cases of East Java, Indonesia, from 2018 and parameterize the dengue model. The estimated basic reduction number for this dataset is $\mathcal{R}_{0}\approx2.2020$ R 0 ≈ 2.2020 . We briefly show the stability results of the model for the case when the basic reproduction number is $\mathcal{R}_{0} <1$ R 0 < 1 . We apply the fractal-fractional operator in the framework of Caputo–Fabrizio to the model and present its numerical solution by using a novel approach. The parameter values estimated for the model are used to compare with fractal-fractional operator, and we suggest that the fractal-fractional operator provides the best fitting for real cases of dengue infection when varying the values of both operators’ orders. We suggest some more graphical illustration for the model variables with various orders of fractal and fractional.

Reliable Analysis on Fast Valving of Ultra-Supercritical Unit Under Transient Fault Conditions

2017 ◽  
Author(s):  
Yu Cai ◽  
Wei Li ◽  
Bao Zhang ◽  
Wenjian Wu ◽  
Deren Sheng ◽  
...  
Keyword(s):  
Power System ◽  
Steam Turbine ◽  
Dynamic Model ◽  
Transient Stability ◽  
Power Grid ◽  
Load Shedding ◽  
Control Mode ◽  
Normal Operation ◽  
Transient Fault ◽  
The Stability

Fast valving of ultra-supercritical unit has great effects on over-speed prevention, load-shedding control, transient stability analysis of electrical system and other security problems. The purpose of fast valving is to maintain the stability of power system once fault or load shedding of unit occurs in the electric power system. Therefore, it is of great significance to study the reliability of fast valving for ultra-supercritical unit. In this paper, the KU ( short shedding) logic condition of SIEMENS T3000 system is analyzed as the research object of fast valving. The unit can be avoided over speed by monitoring the unit load and fast valving under faulty grid conditions based on the KU control. A series of measures will be taken after KU is triggered, for instance the governing valving will be closed quickly and the DEH (digital electro-hydraulic) control of the steam turbine will be switched to speeding control mode. On the other hand, the unit will return to normal operation if the transient fault of power grid disappears. The key contributions of this thesis include three parts: Firstly, based on the analysis of control characteristics of ultra-supercritical unit and protective logic and triggered conditions of KU function, a novel dynamic model by coupling the fast valving of steam turbine and the transient stability of generator is established by applying the PSCAD software. Then, the dynamic response process of ultra-supercritical unit is simulated and calculated by adopting the coupling dynamic model when KU function is triggered. Also the influence factors and reliability of fast valving are analyzed under transient fault conditions. Finally, two optimized measures by increasing the time delay and the speed of quantitative judgment are put forward to reduce risks and avoid the misoperation of signal distortion which may be caused by the power transmitter under transient fault conditions. The results of this study can not only help to evaluate the reliability of fast valving function scientifically in power grid transient fault, but also guide the technicians to analyze the stability of the power grid.

scholarly journals New time delay estimation-based virtual decomposition control for n-DoF robot manipulator

2021 ◽  
Vol 10 (3) ◽  
pp. 192
Author(s):  
Hachmia Faqihi ◽  
Khalid Benjelloun ◽  
Maarouf Saad ◽  
Mohammed Benbrahim ◽  
M. Nabil Kabbaj
Keyword(s):  
Time Delay ◽  
Dynamic Model ◽  
Control Strategy ◽  
Robot Manipulator ◽  
Time Delay Estimation ◽  
Lyapunov Theory ◽  
Degree Of Freedom ◽  
Delay Estimation ◽  
The Stability

<p>One of the most efficient approaches to control a multiple degree-of-freedom robot manipulator is the virtual decomposition control (VDC). However, the use of the re- gressor technique in the conventionnal VDC to estimate the unknown and uncertaities parameters present some limitations. In this paper, a new control strategy of n-DoF robot manipulator, refering to reorganizing the equation of the VDC using the time delay estimation (TDE) have been investigated. In the proposed controller, the VDC equations are rearranged using the TDE for unknown dynamic estimations. Hence, the decoupling dynamic model for the manipulator is established. The stability of the overall system is proved based on Lyapunov theory. The effectiveness of the proposed controller is proved via case study performed on 7-DoF robot manipulator and com- pared to the conventionnal Regressor-based VDC according to some evalution criteria. The results carry out the validity and efficiency of the proposed time delay estimation- based virtual decomposition controller (TD-VDC) approach.</p>

scholarly journals Boundary Stabilization of a Semilinear Wave Equation with Variable Coefficients under the Time-Varying and Nonlinear Feedback

2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
Bei Gong ◽  
Xiaopeng Zhao
Keyword(s):  
Wave Equation ◽  
Riemannian Geometry ◽  
Nonlinear Term ◽  
Variable Coefficients ◽  
Time Varying ◽  
Nonlinear Feedback ◽  
Boundary Stabilization ◽  
Semilinear Wave Equation ◽  
The Stability ◽  
Stability Results

We study the boundary stabilization of a semilinear wave equation with variable coefficients under the time-varying and nonlinear feedback. By the Riemannian geometry methods, we obtain the stability results of the system under suitable assumptions of the bound of the time-varying term and the nonlinearity of the nonlinear term.

scholarly journals On the probabilistic stability of some functional equations

2013 ◽  
Vol 29 (1) ◽  
pp. 125-132
Author(s):  
CLAUDIA ZAHARIA ◽  
◽  
DOREL MIHET ◽  
Keyword(s):  
Fixed Point ◽  
Functional Equations ◽  
Fixed Point Theory ◽  
Point Theory ◽  
Quadratic Functional ◽  
Normed Spaces ◽  
Stability Of Functional Equations ◽  
The Stability ◽  
Stability Results

We establish stability results concerning the additive and quadratic functional equations in complete Menger ϕ-normed spaces by using fixed point theory. As particular cases, some theorems regarding the stability of functional equations in β - normed and quasi-normed spaces are obtained.

A DARWINIAN DYNAMIC MODEL FOR THE EVOLUTION OF POST-REPRODUCTION SURVIVAL

2021 ◽  
pp. 1-18
Author(s):  
J. M. CUSHING ◽  
KATHRYN STEFANKO
Keyword(s):  
Natural Selection ◽  
Dynamic Model ◽  
Discrete Time ◽  
Population Model ◽  
Bifurcation Theory ◽  
Allee Effect ◽  
Phenotypic Trait ◽  
Trade Off ◽  
The Stability ◽  
Low Dimensional

We derive and study a Darwinian dynamic model based on a low-dimensional discrete- time population model focused on two features: density-dependent fertility and a trade-off between inherent (density free) fertility and post-reproduction survival. Both features are assumed to be dependent on a phenotypic trait subject to natural selection. The model tracks the dynamics of the population coupled with that of the population mean trait. We study the stability properties of equilibria by means of bifurcation theory. Whether post-reproduction survival at equilibrium is low or high is shown, in this model, to depend significantly on the nature of the trait dependence of the density effects. An Allee effect can also play a significant role.

Sign in / Sign up

Export Citation Format

Share Document