scholarly journals Facile Fabrication of Sodium Titanate Nanostructures Using Metatitanic Acid (TiO2⋅H2O) and Its Adsorption Property

2012 ◽  
Vol 2012 ◽  
pp. 1-5
Author(s):  
Gang Li ◽  
Lide Zhang ◽  
Ming Fang
Keyword(s):  
Adsorption Capacity ◽  
Surface Area ◽  
Adsorption Property ◽  
Sodium Titanate ◽  
Maximum Adsorption Capacity ◽  
High Adsorption ◽  
Metatitanic Acid ◽  
Titanate Nanostructures ◽  
Facile Fabrication ◽  
Application Potential

Fluffy sodium titanate nanostructures have been fabricated by a simple hydrothermal method with metatitanic acid as precursor. The obtained nanostructures exhibit as the aggregation of nanosheets, and the surface area of the nanostructure is about 110.59 m2/g. Such nanoarchitecture indicates high adsorption capacity to some metal ions, such as Cd2+, and the maximum adsorption capacity has been estimated to be 255.18 mg/g. The possible reasons that are responsible after its high adsorption ability, have been ascribed to the tiny structure, the ion-exchange ability and the large surface area of the sodium titanate nanostructures. And this may greatly enlarge its application potential as an adsorbent.

scholarly journals Effective Poly (Cyclotriphosphazene-Co-4,4′-Sulfonyldiphenol)@rGO Sheets for Tetracycline Adsorption: Fabrication, Characterization, Adsorption Kinetics and Thermodynamics

Nanomaterials ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1540
Author(s):  
Muhammad Ahmad ◽  
Tehseen Nawaz ◽  
Mohammad Mujahid Alam ◽  
Yasir Abbas ◽  
Shafqat Ali ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Surface Area ◽  
High Surface ◽  
High Surface Area ◽  
High Adsorption ◽  
Clean Environment ◽  
Equilibrium Data ◽  
Langmuir Isotherm Model ◽  
High Adsorption Capacity ◽  
Adsorption Equilibrium Data

The development of excellent drug adsorbents and clarifying the interaction mechanisms between adsorbents and adsorbates are greatly desired for a clean environment. Herein, we report that a reduced graphene oxide modified sheeted polyphosphazene (rGO/poly (cyclotriphosphazene-co-4,4′-sulfonyldiphenol)) defined as PZS on rGO was used to remove the tetracycline (TC) drug from an aqueous solution. Compared to PZS microspheres, the adsorption capacity of sheeted PZS@rGO exhibited a high adsorption capacity of 496 mg/g. The adsorption equilibrium data well obeyed the Langmuir isotherm model, and the kinetics isotherm was fitted to the pseudo-second-order model. Thermodynamic analysis showed that the adsorption of TC was an exothermic, spontaneous process. Furthermore, we highlighted the importance of the surface modification of PZS by the introduction of rGO, which tremendously increased the surface area necessary for high adsorption. Along with high surface area, electrostatic attractions, H-bonding, π-π stacking and Lewis acid-base interactions were involved in the high adsorption capacity of PZS@rGO. Furthermore, we also proposed the mechanism of TC adsorption via PZS@rGO.

scholarly journals STUDI ADSORPSI ZAT WARNA NAPHTHOL YELLOW S PADA LIMBAH CAIR MENGGUNAKAN KARBON AKTIF DARI AMPAS TEBU

Jurnal Kimia ◽  
2019 ◽  
Vol 13 (1) ◽  
pp. 104
Author(s):  
W. P. Utoo1 ◽  
E. Santoso ◽  
G. Yuhaneka ◽  
A. I. Triantini ◽  
M. R. Fatqi ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Adsorption Capacity ◽  
Surface Area ◽  
Contact Time ◽  
Adsorption Process ◽  
Activation Process ◽  
Adsorption Model ◽  
High Adsorption ◽  
Prolonged Contact ◽  
Test Result

The aim of this research is to get activated carbon from sugarcane bagasse with high adsorption capacity to Naphthol Yellow S and to know factors influencing the adsorption capacity. Activated carbon is prepared by incomplete combustion of sugracane bagasse. The resulting carbon is activated with H2SO4 with concentration variation of 0.5; 1.0; 1.5 and 2.0 M and is continued by calcination at 400 °C. The measurement of the surface area of ??activated carbon by the methylene blue method indicates that the activation process successfully extends the surface area of carbon from 31.87 m2/g before activation to 66-72 m2/g after activation. Activated carbon with concentration of 2.0 M H2SO4 showed the highest surface area of ??71.85 m2/g, however, the best adsorption was shown by activated carbon with a concentration of 0.5 M H2SO4 with the adsorption capacity of 83.93%. The adsorption test showed that the best amount of adsorbent was 0.2 g with contact time for 30 minutes. Prolonged contact time can decrease the amount of Naphthol Yellow S adsorbed. The best adsorption test result was shown by sample with activator concentration of 0,5 M, mass of 0,2 g and contact time of 30 min with adsorption capacity 95,81% or amount of dye adsorbed equal to 143,72 mg/g. The adsorption study also showed that the entire Naphthol Yellow S adsorption process followed the Langmuir isothemal adsorption model. Qualitative testing of real batik waste indicates that activated carbon can reduce the dyes waste containing Naphthol Yellow Sexhibited by the color of batik waste which is more faded.  

scholarly journals Preparation of phosphorus-doped boron nitride and its adsorption of heavy metals from flue gas

2020 ◽  
Vol 7 (8) ◽  
pp. 200079
Author(s):  
Yanlong Li ◽  
Hongxi Li ◽  
Rundong Li ◽  
Xin Su ◽  
Shengqiang Shen
Keyword(s):  
Heavy Metals ◽  
Boron Nitride ◽  
Specific Surface ◽  
Adsorption Capacity ◽  
Surface Area ◽  
Specific Surface Area ◽  
Flue Gas ◽  
Maximum Adsorption Capacity ◽  
Addition Rate ◽  
Phosphorus Doped

Boron nitride, also known as white graphene, has attracted extensive attention in the fields of adsorption, catalysis and hydrogen storage due to its excellent chemical properties. In this study, a phosphorus-doped boron nitride (P-BN) material was successfully prepared using red phosphorus as a dopant for the preparation of porous boron nitride precursors. The phosphorus content in the P-BN was adjusted based on the addition rate of phosphorus. The specific surface area of P-BN first increased and then decreased with increasing addition rate of phosphorus. The maximum specific surface area was 837.8 m 2 g −1 when the phosphorus addition rate was 0.50. The P-BN prepared in the experiments was used as an adsorbent, and its adsorption capacity for heavy metals from flue gas was investigated. In particular, P-BN presented a stronger adsorption selectivity for zinc compared with other heavy metals, and its adsorption capacity for zinc was 5–38 times higher than for other heavy metals. The maximum adsorption capacity of P-BN for zinc and copper in a single heavy metal atmosphere was 69.45 and 53.80 mg g −1 , respectively.

scholarly journals ADSORPSI ZAT WARNA METILEN BIRU DENGAN KARBON AKTIF DARI KULIT DURIAN MENGGUNAKAN KOH DAN NaOH SEBAGAI AKTIVATOR

2017 ◽  
Vol 6 (1) ◽  
pp. 49-55 ◽  
Author(s):  
Farida Hanum ◽  
Rikardo Jgst Gultom ◽  
Maradona Simanjuntak
Keyword(s):  
Activated Carbon ◽  
Adsorption Capacity ◽  
Surface Area ◽  
Contact Time ◽  
Wavelength Region ◽  
Second Order ◽  
Carbon Surface ◽  
Maximum Adsorption Capacity ◽  
Activation Process ◽  
Maximum Surface

Durian is a kind of tropical fruits which can grow well in Indonesia. Durian is containing 60-75% shell. Durian shell could be a potential alternative to activated carbon because it contains 57.42% carbon. The aim of this research is to know the effect of contact time and  stirring speed to activated carbon adsorption capacity from durian shell with KOH and NaOH as activators. FTIR (Fourier Transform Infra Red) analysis showed the activation process effects on  absorption intensity  wavelength region and resulted in formation of C = C aromatic tape, so that the nature of the charcoal becomes more polar compared with the initial condition. Analysis using spectrophotometer UV-Vis to determine  absorbance and  final concentration of each variation of contact time and stirring speed. The results showed that the maximum adsorption capacity obtained by activation of KOH and NaOH on stirring speed of 150 rpm and a contact time of 90 minutes is equal to 3.92 mg / g and 3.8 mg / g respectively. The maximum surface area obtained by activation of KOH and NaOH during the stirring speed 130 rpm and a contact time of 120 minutes is equal to 1785.263 m2 / g and 1730.332 m2 / g respectively. The maximum surface area obtained from this research has met the standards of commercial activated carbon surface area was between 800-1800 m2/ g. Modeling pseudo second order presents a more representative adsorption data, a second order equation is based on the assumption that adsorption step is chemosorption.

scholarly journals Investigation of kinetics and adsorption isotherm for fluoride removal from aqueous solutions using mesoporous cerium–aluminum binary oxide nanomaterials

RSC Advances ◽  
2021 ◽  
Vol 11 (46) ◽  
pp. 28744-28760
Author(s):  
Rumman Zaidi ◽  
Saif Ullah Khan ◽  
I. H. Farooqi ◽  
Ameer Azam
Keyword(s):  
Adsorption Isotherm ◽  
Aqueous Solutions ◽  
Adsorption Capacity ◽  
Surface Area ◽  
Removal Efficiency ◽  
Small Dose ◽  
Binary Oxide ◽  
Fluoride Removal ◽  
Maximum Adsorption Capacity

Mesoporous Ce–Al binary oxide nanomaterials prepared with a surface area of 110.32 m2 g−1 showed defluoridation capacity at pH 2.4, exhibited maximum adsorption capacity of 384.6 mg g−1 and a removal efficiency of 91.5% at a small dose of nanoadsorbent.

scholarly journals Sonicated Zeolitic Imidazolate Frameork-8 derived Nitrogen-doped hierarchical nanoporous carbon for efficient capture and reversible storage of radioiodine

2021 ◽  
Author(s):  
Elvis Miensah ◽  
Jiuyu Chen ◽  
Aotian Gu ◽  
Peng Wang ◽  
Ying Liu ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Surface Area ◽  
Nanoporous Carbon ◽  
Industrial Applications ◽  
Large Surface Area ◽  
Hydroxyl Groups ◽  
High Adsorption ◽  
Fast Kinetics ◽  
Nitrogen Doped ◽  
High Adsorption Capacity

Abstract Iodine plays a significant role in industry and in chemical processes within living organisms. However, radioiodine exposure possess threats such as thyroid cancer to humans, when they are released into the environment when using nuclear technology and through nuclear accidents. Its capture and storage is critical to safeguard industrial applications while preventing environmental leakages. Herein we report efficient radioiodine capture using a hierarchical nitrogen-doped, large surface area, nanoporous carbon derived from ultrasonication of ZIF-8. The carbon exhibited high adsorption capacity of 434 wt% gravimetrically and 1418 mgg− 1 in cyclohexane solution with fast kinetics and high recoverability. We deduced the high adsorption capacity to be due to the large surface area with micro and mesopores, presence of hydroxyl groups acting as electron donors and the presence of nitrogen, which interacts strongly with the electron-deficient iodine (I2). Moreover, the process best fits the pseudo-second-order and Freundlich models with multilinearity observed with Webber-Morris model. Because of its comparatively lower cost, large surface area, facile preparation, good regeneration and fast kinetics, the as-prepared porous carbon shows exceptional promise as radioiodine adsorbent.

scholarly journals Sheet-like Skeleton Carbon Derived from Shaddock Peels with Hierarchically Porous Structures for Ultra-Fast Removal of Methylene Blue

Water ◽  
2021 ◽  
Vol 13 (18) ◽  
pp. 2554
Author(s):  
Panlong Dong ◽  
Hailin Liu ◽  
Shengrui Xu ◽  
Changpo Chen ◽  
Suling Feng ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Adsorption Capacity ◽  
Surface Area ◽  
Adsorption Process ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Initial Concentration ◽  
Hierarchically Porous ◽  
Column Adsorption

To remove the pollutant methylene blue (MB) from water, a sheet-like skeleton carbon derived from shaddock peels (SPACs) was prepared by NaOH activation followed by a calcination procedure under nitrogen protection in this study. Characterization results demonstrated that the as-prepared SPACs displayed a hierarchically porous structure assembled with a thin sheet-like carbon layer, and the surface area of SPAC-8 (activated by 8 g NaOH) was up to 782.2 m2/g. The as-prepared carbon material presented an ultra-fast and efficient adsorption capacity towards MB due to its macro-mesoporous structure, high surface area, and abundant functional groups. SPAC-8 showed ultrafast and efficient removal capacity for MB dye. Adsorption equilibrium was reached within 1 min with a removal efficiency of 99.6% at an initial concentration of 100 mg/g under batch adsorption model conditions. The maximum adsorption capacity for MB was up to 432.5 mg/g. A pseudo-second-order kinetic model and a Langmuir isotherm model described the adsorption process well, which suggested that adsorption rate depended on chemisorption and the adsorption process was controlled by a monolayer adsorption, respectively. Furthermore, column adsorption experiments showed that 96.58% of MB was removed after passing through a SPAC-8 packed column with a flow rate of 20 mL/min, initial concentration of 50 mg/L, and adsorbent dosage of 5 mg. The as-prepared adsorbent displays potential value in practical applications for dye removal due to its ultrafast and efficient adsorption capacity.

scholarly journals Fabrication of porous composites based on alginate to improve the adsorption capacity of Ni(II)

2021 ◽  
Vol 63 (11) ◽  
pp. 80-84
Author(s):  
Xuan Minh Vu ◽  
◽  
Thi Lan Pham ◽  
Thi My Hanh Le ◽  
Tuan Dung Nguyen ◽  
...  
Keyword(s):  
Specific Surface ◽  
Adsorption Capacity ◽  
Surface Area ◽  
Specific Surface Area ◽  
Calcium Alginate ◽  
Alginate Bead ◽  
Maximum Adsorption Capacity ◽  
Porous Composite ◽  
Calcium Alginate Bead ◽  
Removal Of Heavy Metals

Calcium alginate bead (CAB) is a good adsorbent of heavy metal ions; however, CAB has a small specific surface area, limiting its applications in the removal of heavy metals in water treatment. In this study, alginate is denatured with activated carbon and surfactants to increase the porosity of the material and improve the adsorption capacity of the Ni(II) ion. Initial undenatured calcium alginate bead is almost no pores and a very small specific surface area (~0.04 m2/g). After modification, the porous composite made from alginate combined with active carbon and surfactant (P-CAB) has a large specific surface area ~160 m2/g, 4,000 times higher than CAB. The results of the Ni(II) ion adsorption study also showed that the maximum adsorption capacity of porous composite (qmax of 53.76 mg/g) significantly improved by 8.3 times than the adsorption capacity of CAB (6.48 mg/g).

scholarly journals CuAl LDH/Rice Husk Biochar Composite for Enhanced Adsorptive Removal of Cationic Dye from Aqueous Solution

2020 ◽  
Vol 15 (2) ◽  
pp. 525-537 ◽  
Author(s):  
Neza Rahayu Palapa ◽  
Tarmizi Taher ◽  
Bakri Rio Rahayu ◽  
Risfidian Mohadi ◽  
Addy Rachmat ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Surface Area ◽  
Malachite Green ◽  
Rice Husk ◽  
Low Cost ◽  
Bet Surface Area ◽  
Maximum Adsorption Capacity ◽  
Cationic Dye ◽  
X Ray ◽  
Adsorptive Removal

The preparation of CuAl LDH and biochar (BC) composite derived from rice husk and its application as a low-cost adsorbent for enhanced adsorptive removal of malachite green has been studied. The composite was prepared by a one-step coprecipitation method and characterized by X-ray Diffraction (XRD), Fourier Transform Infra Red (FTIR), Brunauer-Emmett-Teller (BET), and Scanning Electron Microscopy - Energy Dispersive X-ray (SEM−EDX). The result indicated that CuAl LDH was successfully incorporated with the biochar that evidenced by the broadening of XRD peak at 2θ = 24° and the appearance of a new peak at 1095 cm−1 on the FTIR spectra. The BET surface area analysis revealed that CuAl/BC composite exhibited a larger surface area (200.9 m2/g) that the original CuAl LDH (46.2 m2/g). Surface morphological changes also confirmed by SEM image, which showed more aggregated particles. The result of the adsorption study indicated the composite material was efficient in removing malachite green with Langmuir maximum adsorption capacity of CuAl/BC reaching 470.96 mg/g, which is higher than the original CuAl LDH 59.523 mg/g. The thermodynamic analysis suggested that the adsorption of malachite green occurs spontaneously (ΔG < 0 at all tested temperature) and endothermic nature. Moreover, the CuAl/BC composite showed strong potential as a low-cost adsorbent for cationic dye removal since it showed not only a high adsorption capacity but also good reusability. Copyright © 2020 BCREC Group. All rights reserved

scholarly journals Ce-doped UiO-67 nanocrystals with improved adsorption property for removal of organic dyes

RSC Advances ◽  
2019 ◽  
Vol 9 (47) ◽  
pp. 27674-27683 ◽  
Author(s):  
Xue Dong ◽  
Yongcen Lin ◽  
Yuqin Ma ◽  
Lang Zhao
Keyword(s):  
Adsorption Capacity ◽  
Hydrothermal Method ◽  
Negative Charge ◽  
Organic Dyes ◽  
Adsorption Property ◽  
Cationic Dyes ◽  
High Adsorption ◽  
One Step ◽  
High Adsorption Capacity

The Ce-doped UiO-67 nanocrystals were successfully synthesized via a one-step hydrothermal method. Ce doping increases the negative charge on the surface of the material, thus the adsorbent exhibits high adsorption capacity to cationic dyes.

Sign in / Sign up

Export Citation Format

Share Document