scholarly journals Kinetic, Thermodynamic and Equilibrium Studies on Uptake of Rhodamine B onto ZnCl2Activated Low Cost Carbon

2012 ◽  
Vol 9 (1) ◽  
pp. 137-144 ◽  
Author(s):  
N. Bhadusha ◽  
T. Ananthabaskaran
Keyword(s):  
Rhodamine B ◽  
Low Cost ◽  
Order Kinetic ◽  
Biomass Waste ◽  
Equilibrium Studies ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Limonia Acidissima ◽  
Carbonaceous Adsorbent

A carbonaceous adsorbent prepared from biomass waste like wood apple outer shell (Limonia acidissima) by ZnCl2treatment was investigated for its efficiency in removing Rhodamine B (RDB). Influence of agitation time, adsorbent dose, dye concentration, pH and temperature were explored. Two theoretical adsorption isotherms namely Langmuir and Freundlich were used to describe the experimental results. The Langmuir adsorption capacity (Qo) was found to be 46.7 mg/g and the equilibrium parameter (RL) values indicate favourable adsorption. The experimental data were well fitted with Langmuir isotherm model and pseudo second order kinetic model. Desorption studies showed that ion exchange mechanism might be involved in the adsorption process.

scholarly journals Adsorptive Removal of Methylene Blue onto ZnCl2Activated Carbon from Wood Apple Outer Shell: Kinetics and Equilibrium Studies

2011 ◽  
Vol 8 (4) ◽  
pp. 1696-1707 ◽  
Author(s):  
N. Bhadusha ◽  
T. Ananthabaskaran
Keyword(s):  
Methylene Blue ◽  
Outer Shell ◽  
Blue Dye ◽  
Order Kinetic ◽  
Biomass Waste ◽  
Equilibrium Studies ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Limonia Acidissima

Methylene blue dye removal from aqueous solution was investigated using ZnCl2activated carbon prepared from wood apple outer shell (Limonia acidissima, biomass waste). Influence of agitation time, adsorbent dose, dye concentration, pH and temperature were explored. Two theoretical adsorption isotherms namely Langmuir and Freundlich were used to describe the experimental results. The Langmuir adsorption capacity (Qo) was found to be 35.1 mg/g and the equilibrium parameter (RL) values indicate favourable adsorption. The experimental data were well fitted with Langmuir isotherm model and pseudo second order kinetic model. Desorption studies showed that ion exchange mechanism might be involved in the adsorption process.

Removal of Rhodamine B from Wastewater by Rectorite and Sepiolite-Kinetic Study and Equilibrium Isotherm Analyses

2011 ◽  
Vol 183-185 ◽  
pp. 362-366 ◽  
Author(s):  
Jun Li ◽  
Ming Zhen Hu
Keyword(s):  
Rhodamine B ◽  
Low Cost ◽  
Freundlich Isotherm ◽  
Second Order ◽  
Order Kinetic ◽  
Isotherm Equation ◽  
Adsorption Removal ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order

Adsorption removal of a cationic dye, rhodamine B (RhB) from water onto rectorite and sepiolite was investigated. The rectorite and sepiolite were characterized by Fourier transform infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM). Attempts were made to fit the isothermal data using Langmuir and Freundlich equations. The experimental results have demonstrated that the equilibrium data are fitted well by a Freundlich isotherm equation. Pseudo-first-order and pseudo-second-order models were considered to evaluate the rate parameters. The experimental data were well described by the pseudo-second-order kinetic model. The results indicate that the rectorite exhibited higher adsorption capacity for the removal of RhB than sepiolite and could be employed as a low-cost alternative in wastewater treatment for the removal of cationic dyes.

scholarly journals Utilization of Sawdust Waste Biomass as an Eco-Friendly Biosorbent for Bioremediation of Manganese Pollution in Aqueous Environment

2019 ◽  
Vol 2 (3) ◽  
pp. 823-830
Author(s):  
Fatih Deniz
Keyword(s):  
Operating Conditions ◽  
Aqueous Environment ◽  
Order Kinetic ◽  
Waste Biomass ◽  
Equilibrium Studies ◽  
Manganese Removal ◽  
Removal Capacity ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

In this study, the sawdust waste biomass was used as an eco-friendly biosorbent material for the bioremediation of manganese pollution in aqueous environment. The effects of various environmental variables such as pH, biosorbent amount, metal concentration and contact time on the manganese biosorption were studied in batch operating conditions. The kinetic and equilibrium studies were performed to elucidate the biosorption behavior of biosorbent material. The biosorption capacity of biosorbent was strongly influenced by the operating parameters. The experimental data were more successfully modeled by the pseudo-second-order kinetic model and Langmuir isotherm model compared to other models applied in the study. The maximum manganese removal capacity of biosorbent was found to be 25.655 mg g-1. These findings showed that the sawdust waste biomass can be used as an eco-friendly biosorbent material for the bioremediation of manganese pollution in aqueous environment.

scholarly journals Granules of brick waste (GBW) as low-cost sorbent for removal of Pb+2 ions from aqueous solutions

2020 ◽  
Vol 27 (3) ◽  
pp. 1-8
Author(s):  
Teba H. Mhawesh ◽  
Ziad T. Abd Ali
Keyword(s):  
Aqueous Solutions ◽  
Low Cost ◽  
Isotherm Models ◽  
Order Kinetic ◽  
Sorption Data ◽  
X Ray ◽  
Batch Tests ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

The potential application of granules of Granular brick waste as a low-cost sorbent for removal of Pb+2 ions from aqueous solutions has been studied. The properties of Granular brick waste were determined through several tests such as X-Ray diffraction , Energy dispersive X-ray, Scanning electron microscopy , and surface area. In batch tests, the influence of several operating parameters including contact time, initial concentration, agitation speed, and the dose of GBW was investigated. The best values of these parameters that provided maximum removal efficiency of lead (89.5 %) were 2.5 hr, 50 mg/L, 250 rpm, and 1.8 g/100mL, respectively. The sorption data obtained by batch experiments subjected to the three isotherm models called Langmuir, Freundlich and   Elovich. The results showed that the Langmuir isotherm model described well the sorption data (R2= 0.9866) in comparison with other models. The kinetic data were analyzed using two kinetic models called pseudo_first_order and pseudo_second_order. The pseudo-second-order kinetic model was found to agree well with the experimental data.

Equilibrium and Kinetic Studies of Copper Metal Ion Biosorption by Flavobacterium sp. as a Low-Cost Natural Biosorbent

2011 ◽  
Vol 322 ◽  
pp. 436-439 ◽  
Author(s):  
Xi Chan Zhang ◽  
Xing Guang Li
Keyword(s):  
Metal Ion ◽  
Binding Capacity ◽  
Low Cost ◽  
Kinetic Studies ◽  
Ion Concentration ◽  
Order Kinetic ◽  
Equilibrium Studies ◽  
Initial Ph ◽  
Order Kinetic Model ◽  
Pseudo Second Order

Present study deals with the evaluation of biosorptive removal of copper byFlavobacterium sp.Experiments have been carried out to find the effect of various parameters such as initial pH, contact time and initial metal ion concentration. Adsorption equilibrium studies showed that Cu(II) adsorption data followed the Langmuir model, the maximum binding capacity ofwas 55.20 mg/g at pH 6.0. Kinetics of copper biosorption by Flavobacterium sp. biomass is better described by pseudo second order kinetic model. It was also clearly observed that The present study indicated thatFlavobacterium sp.biomass may be used as a cost and effective biosorbent for the removal of Cu(II) ions from wastewater.

scholarly journals Preparation of Cotton Fibers Modified With Aromatic Heterocyclic Compounds and Study of Cr(VI) Adsorption Performance

2021 ◽  
Author(s):  
Zhiyu Huang ◽  
Peng Wu ◽  
Yankun Yin ◽  
Xiang Zhou ◽  
Lu Fu ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Metal Ion ◽  
Low Cost ◽  
Order Kinetic ◽  
Adsorption Mechanisms ◽  
Adsorption Capacities ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

Abstract In order to prepare low-cost and environmentally friendly adsorbent materials for adsorption of heavy metal ion, two kinds of novel modified cottons (C-4-APD and C-2-APZ) were obtained by introducing 4-aminopyridin and 2-aminopyrazine into the surface of degreasing cotton, respectively, and used for the removal of Cr(VI) ions from aqueous solution. The two modified cottons were characterized by Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS), which confirmed the amino groups, pyridine groups and pyrazine groups grafted onto the surface of modified cottons. The maximum adsorption capacities of C-4-APD and C-2-APZ were 73.78 mg/g and 61.34 mg/g, respectively, at the optimum pH of 6 and an initial concentration of 200 mg/g. Kinetic and isotherm studies were carried out to investigate the adsorption behavior of the modified cottons on Cr(VI) ions. The results showed that the adsorption of Cr(VI) ions by modified cottons followed a pseudo-second-order kinetic model, the equilibrium data were in good agreement with the Langmuir isotherm model, and electrostatic and chemisorption may be the main adsorption mechanisms. The recovery and reuse of modified cotton were achieved by washing with 2 wt% thiourea-hydrochloric acid solution (0.5 mol/L concentration of HCl), and the adsorption capacities of C-4-APD and C-2-APZ were maintained above 90% and 80%, respectively, after six cycles.

scholarly journals Kinetic and equilibrium studies of adsorption of Pb(II) on low cost agri-waste adsorbent Jute Stick Powder

2019 ◽  
Vol 10 (4) ◽  
pp. 295-304
Author(s):  
Jahangir Alam ◽  
Mohammad Nasir Uddin
Keyword(s):  
Experimental Data ◽  
Metal Ion ◽  
Adsorption Mechanism ◽  
Low Cost ◽  
Ion Concentration ◽  
Order Kinetic ◽  
Equilibrium Studies ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Adsorption Desorption

A lingo-cellulosic material Jute Stick Powder was used as a biosorbent to remove Pb(II) ions from aqueous solution and the biosorption behavior was investigated as a function of pH, metal ion concentration, adsorbent dosages and agitation time. Sorption binding sites present in JSP was assessed by Infrared spectroscopy (IR) and Scanning Electron Micrograph (SEM). The determined experimental data were fitted to some common kinetic and equilibrium models. Langmuir isotherm and pseudo-second-order kinetic model gave better fit to experimental data. The study revealed that spontaneous ion-exchange and complexation process involved in the adsorption mechanism. When the repeated adsorption-desorption cycles were performed, JSP kept its adsorptive efficiency even after three cycles of reuse.

scholarly journals Heterogeneous Fenton-Like Oxidation of Methylene Blue Using Alternative Catalysts

2021 ◽  
Vol 29 (48) ◽  
pp. 91-97
Author(s):  
Juraj Michálek ◽  
Kseniya Domnina ◽  
Veronika Kvorková ◽  
Kristína Šefčovičová ◽  
Klaudia Mončeková ◽  
...  
Keyword(s):  
Hydrogen Peroxide ◽  
Methylene Blue ◽  
Low Cost ◽  
Hydrogen Peroxide Solution ◽  
Blue Dye ◽  
Order Kinetic ◽  
Heterogeneous Fenton ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Black Nickel

Abstract The usage of the low-cost catalysts for methylene blue removal from wastewater was investigated. Heterogeneous Fenton-like process consists of the use of a hydrogen peroxide solution, and an iron-rich catalyst, red mud and black nickel mud were used for that purpose. The factors such as the catalyst dose and the hydrogen peroxide solution volume were monitored. The results of experiments showed that the degradation of methylene blue dye in Fenton-like oxidation process using selected catalysts can be described by a pseudo-second-order kinetic model. The highest dye removal efficiency (87.15 %) was achieved using the black nickel mud catalyst after 30 minutes of reaction.

Fast Removal of Pb2+ from Aqueous Solution by Water Insoluble Konjac Glucomannan

2009 ◽  
Vol 610-613 ◽  
pp. 65-68 ◽  
Author(s):  
Xue Gang Luo ◽  
Feng Liu ◽  
Xiao Yan Lin
Keyword(s):  
Aqueous Solution ◽  
Correlation Coefficients ◽  
Konjac Glucomannan ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Equilibrium Process ◽  
Fast Removal

Konjac glucomannan (KGM) was converted into water insoluble konjac glucomannan (WIKGM) by treating with NaOH through completely deacetylated reaction. Adsorption study was carried out for the adsorption of Pb2+ from aqueous solution using water insoluble konjac glucomannan. The influences of pH, contact time, temperature and initial Pb2+ concentration on the absorbent were studied. Results of kinetic data showed that the Pb2+ adsorption rate was fast and good correlation coefficients were obtained for the pseudo second-order kinetic model. The equilibrium process was described well by the Langmuir isotherm model with maximum adsorption capacity of 9.18 mg/g on WIKGM at 25°C.

scholarly journals Adsorption of tricresyl phosphate onto graphene nanomaterials from aqueous solution

2017 ◽  
Vol 76 (6) ◽  
pp. 1565-1573 ◽  
Author(s):  
Jun Liu ◽  
Siying Xia ◽  
Xiaomeng Lü ◽  
Hongxiang Shen
Keyword(s):  
Experimental Data ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Tricresyl Phosphate ◽  
Batch Mode ◽  
Order Kinetic Model ◽  
Endothermic Process ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Increasing Temperature

Phosphorus flame retardant tricresyl phosphate (TCP) adsorption on graphene nanomaterials from aqueous solutions was explored using batch and column modes. Comparative studies were performed regarding the kinetics and equilibrium of TCP adsorption on graphene oxide (GO) and graphene (G) in batch mode. The adsorption kinetics exhibited a rapid TCP uptake, and experimental data were well described by the pseudo-second-order kinetic model. Adsorption isotherm data of TCP on the two adsorbents displayed an improved TCP removal performance with increasing temperature at pH 5, while experimental data were well described by the Langmuir isotherm model with a maximum adsorption capacity of 87.7 mg·g−1 for G, and 30.7 mg·g−1 for GO) at 303 K. The thermodynamic parameters show that the adsorption reaction is a spontaneous and endothermic process. In addition, dynamic adsorption of TCP in a fixed G column confirmed a faster approach to breakthrough at high flow rate, high influent TCP concentration, and low filling height of adsorbent. Breakthrough data were successfully described by the Thomas and Yoon-Nelson models.

Sign in / Sign up

Export Citation Format

Share Document