scholarly journals Computational Study on Substituteds-Triazine Derivatives as Energetic Materials

2012 ◽  
Vol 9 (2) ◽  
pp. 583-592 ◽  
Author(s):  
Vikas D. Ghule ◽  
S. Radhakrishnan ◽  
Pandurang M. Jadhav ◽  
Surya P. Tewari
Keyword(s):  
Thermal Stability ◽  
Energetic Materials ◽  
Density Functional ◽  
Crystal Packing ◽  
Computational Study ◽  
Heats Of Formation ◽  
Dissociation Energies ◽  
The Density Functional Theory ◽  
Triazine Derivatives ◽  
Derivatives Of

s-Triazine is the essential candidate of many energetic compounds due to its high nitrogen content, enthalpy of formation and thermal stability. The present study explores s-triazine derivatives in which different -NO2, -NH2and -N3substituted azoles are attached to the triazine ring via C-N linkage. The density functional theory is used to predict geometries, heats of formation and other energetic properties. Among the designed compounds, -N3derivatives show very high heats of formation. The densities for designed compounds were predicted by using the crystal packing calculations. Introduction of -NO2group improves density as compared to -NH2and -N3, their order of increasing density can be given as NO2>N3>NH2. Analysis of the bond dissociation energies for C-NO2, C-NH2and C-N3bonds indicates that substitutions of the -N3and -NH2group are favorable for enhancing the thermal stability ofs-triazine derivatives. The nitro and azido derivatives of triazine are found to be promising candidates for the synthetic studies.

scholarly journals THEORETICAL INVESTIGATIONS ON DETONATION PERFORMANCE AND STABILITY OF THE DIFLUOROAMINO-PRISMANE DERIVATIVES

Química Nova ◽  
2020 ◽  
Author(s):  
Butong Li ◽  
Lulin LI ◽  
Ju Peng
Keyword(s):  
Energetic Materials ◽  
High Energy ◽  
High Energy Density ◽  
Heats Of Formation ◽  
Bond Dissociation Energies ◽  
Dissociation Energies ◽  
Theoretical Investigations ◽  
High Energy Density Compounds ◽  
Derivatives Of ◽  
Difluoroamino Group

The difluoroamino derivatives of prismane were designed and calculated at the B3LYP/6-311G** level. The detonation performances, as well as the band gap, were investigated to look for high energy density compounds. Our calculations showed that difluoroamino group is an effective substitute group for increasing density and heats of formation. All compounds have large heats of formation, and there is a linear relationship between the heats of formation (HOFs) and the substituent numbers. Bond dissociation energies of trigger bonds are all over 200kJ/mol, which indicated that these prismane derivatives have good stability. More than three substituted groups made the detonation performances meet the requirement of energetic materials. Our calculations provided basic information for the further syntheses of title molecules.

Theoretical Studies on Structures and Properties of Pentazine,1,2,4,5-Tetrazine and s-Triazine Derivatives with Nitrogen - Containing Substitutents

2013 ◽  
Vol 395-396 ◽  
pp. 104-115 ◽  
Author(s):  
Xiao Qin Liang ◽  
Yan Zheng ◽  
Bi Qin Wang ◽  
Xue Mei Pu
Keyword(s):  
Energetic Materials ◽  
Substituent Effects ◽  
High Energy ◽  
Heats Of Formation ◽  
Bond Dissociation Energies ◽  
Hydrogen Atoms ◽  
Dissociation Energies ◽  
Structures And Properties ◽  
Triazine Derivatives ◽  
Low Sensitivity

B3LYP /aug-cc-pvdz level of theory, combined with NBO and G3 methods, is applied to study substituent effects on the geometries, bond dissociation energies and high energetic density material properties of 27 kinds of derivatives designed by substituted hydrogen atoms of pentazine, 1,2,4,5-tetrazine and s-triazine, of which the hydrogen atoms are substituted by CN, -NO2, -NH2, -N3, -N2H, -NHNH2, -N4H and-N4H3groups. The relatively small heats of formation are observed for the derivatives substituted by-NH2, -H, -NO2and-NHNH2. The order of heats of formation for the derivatives containing the same substituent is: pentazine > 1,2,4,5-tetrazine >s-triazine. For the derivatives substituted by-CN, -N2H and-N4H3, heats of formation are 860~1124 kJ/mol,in which heats of formation of 1,2,4,5-tetrazine derivatives are larger. For derivatives substituted by-N3and-N4H, their heats of formation are 974 1735 kJ/mol, which are the highest in all derivatives. The order of heats of formation is: s-triazine derivative > 1,2,4,5-tetrazine derivative > pentazine derivative. The normalized heats of formation of these pentazine derivatives substituted by-CN-N3,- N2H and N4H and 1,2,4,5-tetrazine derivatives substituted by-CN-N3and N4H are 93 109 kJ, which is higher than that of triazido-s-triazine and diazido-s-tetrazine derived from Hiskey. Our observations indicate that the higher heats of formation of substituent molecules have, the higher ones the substitutive derivatives. By means of the data of dissociation energy, it can be found that the heats of formation of derivatives substituted by N3, -N2H and CN are greater, and they are also more stable. It is possile for them to become energetic materials with high-energy and low sensitivity.

scholarly journals Application of β-Phosphorylated Nitroethenes in [3+2] Cycloaddition Reactions Involving Benzonitrile N-Oxide in the Light of a DFT Computational Study

Organics ◽  
2021 ◽  
Vol 2 (1) ◽  
pp. 26-37
Author(s):  
Karolina Zawadzińska ◽  
Karolina Kula
Keyword(s):  
Density Functional ◽  
Reaction Path ◽  
Computational Study ◽  
Cyano Group ◽  
Cycloaddition Reactions ◽  
Functional Theory ◽  
The Density Functional Theory ◽  
Reaction Channels ◽  
One Step ◽  
Step Mechanism

The regiochemistry of [3+2] cycloaddition (32CA) processes between benzonitrile N-oxide 1 and β-phosphorylated analogues of nitroethenes 2a–c has been studied using the Density Functional Theory (DFT) at the M062X/6-31+G(d) theory level. The obtained results of reactivity indices show that benzonitrile N-oxide 1 can be classified both as a moderate electrophile and moderate nucleophile, while β-phosphorylated analogues of nitroethenes 2a–c can be classified as strong electrophiles and marginal nucleophiles. Moreover, the analysis of CDFT shows that for [3+2] cycloadditions with the participation of β-phosphorylatednitroethene 2a and β-phosphorylated α-cyanonitroethene 2b, the more favored reaction path forms 4-nitro-substituted Δ2-isoxazolines 3a–b, while for a reaction with β-phosphorylated β-cyanonitroethene 2c, the more favored path forms 5-nitro-substituted Δ2-isoxazoline 4c. This is due to the presence of a cyano group in the alkene. The CDFT study correlates well with the analysis of the kinetic description of the considered reaction channels. Moreover, DFT calculations have proven the clearly polar nature of all analyzed [3+2] cycloaddition reactions according to the polar one-step mechanism.

Structure, stability and intramolecular interaction of M(N5)2(M = Mg, Ca, Sr and Ba) : a theoretical study

RSC Advances ◽  
2015 ◽  
Vol 5 (28) ◽  
pp. 21823-21830 ◽  
Author(s):  
Xueli Zhang ◽  
Junqing Yang ◽  
Ming Lu ◽  
Xuedong Gong
Keyword(s):  
Energetic Materials ◽  
Density Functional ◽  
Alkaline Earth ◽  
Theoretical Study ◽  
Intramolecular Interaction ◽  
Earth Metal ◽  
Structure Stability ◽  
Alkaline Earth Metal ◽  
Functional Theory ◽  
The Density Functional Theory

The potential energetic materials, alkaline earth metal complexes of the pentazole anion (M(N5)2, M = Mg2+, Ca2+, Sr2+and Ba2+), were studied using the density functional theory.

Al-doped graphene as an effective adsorber for some toxic derivatives of aromatic hydrocarbons

2017 ◽  
Vol 16 (01) ◽  
pp. 1750004 ◽  
Author(s):  
Min Ji ◽  
Xinlu Cheng ◽  
Weidong Wu
Keyword(s):  
Charge Transfer ◽  
Aromatic Hydrocarbons ◽  
Adsorption Energy ◽  
Density Functional ◽  
Hydroxyl Group ◽  
The Density Functional Theory ◽  
Doped Graphene ◽  
Perfect Graphene ◽  
Hydrocarbons Adsorption ◽  
Derivatives Of

The density functional theory (DFT) was used to investigate some toxic derivatives of aromatic hydrocarbons adsorption on perfect graphene (pG) and graphene-doped with B/Al/Ga (BG/AlG/GaG). And the parallel and vertical adsorptions were considered for the position relation between the adsorbent and adsorbate. The adsorption energy, adsorption distance, charge transfer and density of states (DOS) were discussed in optimized structures. The greater adsorption energy, shorter adsorption distance and more charge transfer were found in AlG by studying the four kinds of molecules (phenol/m-cresol/PCP/p-NP) adsorption on pG/BG/AlG/GaG. Then, 10 derivatives adsorption on AlG were reported, and the adsorption energy increased in the order of pentachlorophenol [Formula: see text] 2,4,6-trichlorophenol [Formula: see text] 2,4-dichlorophenol [Formula: see text] p-cresol [Formula: see text] m-cresol [Formula: see text] phenol [Formula: see text] o-chlorophenol [Formula: see text] o-cresol [Formula: see text] 2,4,6-trintrotoluene [Formula: see text] para-nitrophenol. The interaction between these derivatives and the substrate was chemisorption for AlG and physisorption for pG. The oxygen atom in nitro group was more closer to the substrate than in hydroxyl group about optimized structures.

scholarly journals Synthesis, X-Ray Crystallography, Thermal Analysis, and DFT Studies of Ni(II) Complex with 1-Vinylimidazole Ligand

2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
Fatih Şen ◽  
Ramazan Şahin ◽  
Muharrem Dinçer ◽  
Ömer Andaç ◽  
Murat Taş
Keyword(s):  
Density Functional ◽  
Computational Study ◽  
Basis Sets ◽  
Mulliken Charge ◽  
Monoclinic Space Group ◽  
X Ray Diffraction ◽  
Dft Methods ◽  
X Ray ◽  
X Ray Crystallography ◽  
The Density Functional Theory

The paper presents a combined experimental and computational study of hexa(1-vinylimidazole)Ni(II) perchlorate complex. The complex was prepared in the laboratory and crystallized in the monoclinic space group P21/n with a=8.442(5), b=13.686(8), c=16.041(9) Å, α=γ=90, β=96.638(5), and Z=1. The complex has been characterized structurally (by single-crystal X-Ray diffraction) and its molecular structure in the ground state has been calculated using the density functional theory (DFT) methods with 6-31G(d) and LanL2DZ basis sets. Thermal behaviour and stability of the complex were studied by TGA/DTA analyses. Besides, the nonlinear optical effects (NLO), molecular electrostatic potential (MEP), frontier molecular orbitals (FMO), and the Mulliken charge distribution were investigated theoretically.

Density functional study of guanidine-azole salts as energetic materials

2018 ◽  
Vol 96 (10) ◽  
pp. 949-956 ◽  
Author(s):  
Si-Yu Xu ◽  
Zhou-Yu Meng ◽  
Feng-Qi Zhao ◽  
Xue-Hai Ju
Keyword(s):  
Energetic Materials ◽  
Density Functional ◽  
Dft Method ◽  
Impact Sensitivity ◽  
Detonation Performance ◽  
Functional Study ◽  
Detonation Properties ◽  
Geometrical Structures ◽  
Counter Ions ◽  
The Density Functional Theory

A series of guanidine cations and azole anions were designed for use as energetic salts. Their geometrical structures were optimized by the density functional theory (DFT) method. The counter ions were matched by the similar magnitude of the electron affinity (EA) of the cation and the ionization potential (IP) of the anion. The densities, heats of formation, detonation parameters, and impact sensitivity were predicted. The incorporation of guanidine cations and diazole anions are favorable to form thermal stable salts except cation A1. The diaminoguanidine cation has greater impact on the density and detonation properties of the salts than the triaminoguanidine cation. 2-Amino-3-nitroamino-4,5-nitro-dinitropyrazole is the best anion for advancing the detonation performance among all the anions. Incorporating the C=O bond into the guanidine cations enhances the density and detonation performance of the guanidine-azole salts. The salts containing III1–III4 anion have better detonation properties than HMX, indicating that these salts are potential energetic compounds. Compared with RDX or HMX, some salts with diaminoguanidine cation display lower impact sensitivity.

Mechanistic insight into the selective trans-1,4-polymerization of butadiene by terpyridine–iron(II) complexes — A computational study

2009 ◽  
Vol 87 (10) ◽  
pp. 1392-1405 ◽  
Author(s):  
Sven Tobisch
Keyword(s):  
Density Functional ◽  
Computational Study ◽  
Dft Method ◽  
Chain Growth ◽  
Functional Theory ◽  
The Density Functional Theory ◽  
Insertion Mechanism ◽  
Trans Regulation ◽  
Insight Into

The density functional theory (DFT) method has been employed to unravel mechanistic intricacies of the 1,4-polymerization of 1,3-butadiene mediated by the [(η3-RC3H4)FeII(C15H11N3)(η2-C4H6)]+ terpyridine–iron(II) active catalyst species. The π-allyl-insertion mechanism is operative for chain growth, whilst the alternative σ-allyl-insertion mechanism has been explicitly demonstrated as being inoperable. This study elucidates the mechanism of cis–trans regulation and unveils the factors that govern the observed high trans-1,4 stereoselectivity, in particular, the discriminative role of allylic isomerization. An atactic trans-1,4-polydiene is expected from polymerization of a terminally monosubstituted butadiene, the experimental results of which have not been reported thus far.

scholarly journals Protonated heterocyclic derivatives of cyclopropane and cyclopropanone: classical species, alternate sites, and ring fragmentation

2015 ◽  
Vol 93 (7) ◽  
pp. 708-714 ◽  
Author(s):  
Margarida S. Miranda ◽  
Darío J.R. Duarte ◽  
Joaquim C.G. Esteves da Silva ◽  
Joel F. Liebman
Keyword(s):  
Density Functional Theory ◽  
Gas Phase ◽  
Density Functional ◽  
Computational Study ◽  
Basis Set ◽  
Proton Affinities ◽  
Functional Theory ◽  
Heterocyclic Derivatives ◽  
Gas Phase Basicities ◽  
Derivatives Of

A computational study has been performed for protonated oxygen- or nitrogen-containing heterocyclic derivatives of cyclopropane and cyclopropanone. We have searched for the most stable conformations of the protonated species using density functional theory with the B3LYP functional and the 6-31G(2df,p) basis set. More accurate enthalpy values were obtained from G4 calculations. Proton affinities and gas-phase basicities were accordingly derived.

A complementary experimental and computational study of loxapine succinate and its monohydrate

2013 ◽  
Vol 69 (11) ◽  
pp. 1273-1278 ◽  
Author(s):  
Rajni M. Bhardwaj ◽  
Blair F. Johnston ◽  
Iain D. H. Oswald ◽  
Alastair J. Florence
Keyword(s):  
Succinic Acid ◽  
Powder Diffraction ◽  
Density Functional ◽  
Crystal Packing ◽  
Computational Study ◽  
Geometry Optimization ◽  
Global Optimum ◽  
X Ray Diffraction ◽  
X Ray ◽  
Fixed Cell

The crystal structures of loxapine succinate [systematic name: 4-(2-chlorodibenzo[b,f][1,4]oxazepin-11-yl)-1-methylpiperazin-1-ium 3-carboxypropanoate], C18H19ClN3O+·C4H5O4−, and loxapine succinate monohydrate {systematic name: bis[4-(2-chlorodibenzo[b,f][1,4]oxazepin-11-yl)-1-methylpiperazin-1-ium] succinate succinic acid dihydrate}, 2C18H19ClN3O+·C4H4O42−·C4H6O4·2H2O, have been determined using X-ray powder diffraction and single-crystal X-ray diffraction, respectively. Fixed cell geometry optimization calculations using density functional theory confirmed that the global optimum powder diffraction derived structure also matches an energy minimum structure. The energy calculations proved to be an effective tool in locating the positions of the H atoms reliably and verifying the salt configuration of the structure determined from powder data. Crystal packing analysis of these structures revealed that the loxapine succinate structure is based on chains of protonated loxapine molecules while the monohydrate contains dispersion stabilized centrosymmetric dimers. Incorporation of water molecules within the crystal lattice significantly alters the molecular packing and protonation state of the succinic acid.

Sign in / Sign up

Export Citation Format

Share Document