scholarly journals Potential of Ceria-Based Catalysts for the Oxidation of Landfill Leachate by Heterogeneous Fenton Process

2012 ◽  
Vol 2012 ◽  
pp. 1-8 ◽  
Author(s):  
E. Aneggi ◽  
V. Cabbai ◽  
A. Trovarelli ◽  
D. Goi
Keyword(s):  
Solid Solutions ◽  
Landfill Leachate ◽  
Oxygen Demand ◽  
Doped Ceria ◽  
Fenton Process ◽  
Heterogeneous Fenton ◽  
Batch System ◽  
Iron Doped ◽  
Before And After ◽  
Pure Ceria

In this study, ceria and ceria-zirconia solid solutions were tested as catalyst for the treatment of landfill leachate with a Fenton-like process. The catalysts considered in this work were pure ceria and ceria-zirconia solid solutions as well as iron-doped samples. All the catalysts were extensively characterized and applied in batch Fenton-like reactions by a close batch system, the COD (chemical oxygen demand) and TOC (total organic carbon) parameters were carried out before and after the treatments in order to assay oxidative abatement. Results show a measurable improvement of the TOC and COD abatement using ceria-based catalysts in Fenton-like process and the best result was achieved for iron-doped ceria-zirconia solid solution. Our outcomes point out that heterogeneous Fenton technique could be effectively used for the treatment of landfill leachate and it is worth to be the object of further investigations.

The use of steel slags in the heterogeneous Fenton process for decreasing the chemical oxygen demand of oil refinery wastewater

2018 ◽  
Vol 78 (5) ◽  
pp. 1159-1167 ◽  
Author(s):  
Behnam Heidari ◽  
Mohsen Soleimani ◽  
Nourollah Mirghaffari
Keyword(s):  
Microwave Irradiation ◽  
Chemical Oxygen Demand ◽  
Steel Slag ◽  
Oxygen Demand ◽  
Oil Refinery ◽  
Fenton Process ◽  
Refinery Wastewater ◽  
Optimum Conditions ◽  
Heterogeneous Fenton ◽  
Oil Refinery Wastewater

Abstract The Fenton process is a useful and inexpensive type of advanced oxidation process for industrial wastewater treatment. This study was performed with the aim of using the steel slag as a catalyst in the heterogeneous Fenton process in order to reduce the chemical oxygen demand (COD) of oil refinery wastewater. The effects of various parameters including the reaction time (0.5, 1.0, 2.0, 3.0 and 4.0 h), pH (2.0, 3.0, 4.0, 5.0, 6.0 and 7.0), the concentration of steel slag (12.5, 25.0 and 37.5 g/L), and H2O2 concentration (100, 250, 400 and 500 mg/L) on the Fenton process were investigated. Furthermore, the effect of microwave irradiation on the process efficiency was studied by considering the optimum conditions of the mentioned parameters. The results showed that using 25.0 g/L of steel slag and 250 mg/L H2O2, at pH = 3.0, could reduce COD by up to 64% after 2.0 h. Also, microwave irradiation decreased the time of the process from 120 min to 25 min in the optimum conditions, but it consumed a high amount of energy. It could be concluded that steel slags had a high potential in the treatment of oil refinery wastewater through the Fenton process.

Landfill leachate treatment using the sequencing batch biofilm reactor method integrated with the electro-Fenton process

2014 ◽  
Vol 68 (6) ◽  
Author(s):  
Dao-Bin Zhang ◽  
Xiao-Gang Wu ◽  
Yi-Si Wang ◽  
Hui Zhang
Keyword(s):  
Landfill Leachate ◽  
Oxygen Demand ◽  
Ammonia Nitrogen ◽  
Biological Oxygen Demand ◽  
Biofilm Reactor ◽  
Electrolysis Time ◽  
Fenton Process ◽  
Optimal Conditions ◽  
Leachate Treatment ◽  
Sequencing Batch Biofilm Reactor

AbstractA study was conducted on the treatment of landfill leachate by combining the sequencing batch biofilm reactor (SBBR) method with the electro-Fenton method. The reduction of chemical oxygen demand (COD), biological oxygen demand (BOD5), and ammonia nitrogen (NH4+-N) from the leachate by the SBBR method was investigated. For the electro-Fenton experiment, the changes in COD and total organic carbon (TOC) with the increase in H2O2 dosage and electrolysis time under optimal conditions were also analysed. The results showed that the average efficiencies of reduction of COD, BOD5, and NH4+ -N achieved using the SBBR method were 21.6 %, 54.7 %, and 56.1 %, respectively. The bio-effluent was degraded by the subsequent electro-Fenton process, which was rapid over the first 30 min then subsequently slowed. After 60 min of the electro-Fenton treatment, the efficiencies of reduction of TOC, COD, and BOD5 were 40.5 %, 71.6 %, and 61.0 %, respectively. There is a good correlation between the absorbance of leachate at 254 nm (UV254) and COD or TOC during the electro-Fenton treatment.

scholarly journals Removal of Refractory Organics from Biologically Treated Landfill Leachate by Microwave Discharge Electrodeless Lamp Assisted Fenton Process

2015 ◽  
Vol 2015 ◽  
pp. 1-9 ◽  
Author(s):  
Jiuyi Li ◽  
Lele Qin ◽  
Lei Zhao ◽  
Aimin Wang ◽  
Yong Chen ◽  
...  
Keyword(s):  
Landfill Leachate ◽  
Microwave Discharge ◽  
Oxygen Demand ◽  
Fenton Process ◽  
Molecular Weights ◽  
Polycyclic Aromatic ◽  
Electrodeless Lamp ◽  
Pollutants Removal ◽  
Trace Concentrations ◽  
Refractory Organics

Biologically treated leachate usually contains considerable amount of refractory organics and trace concentrations of xenobiotic pollutants. Removal of refractory organics from biologically treated landfill leachate by a novel microwave discharge electrodeless lamp (MDEL) assisted Fenton process was investigated in the present study in comparison to conventional Fenton and ultraviolet Fenton processes. Conventional Fenton and ultraviolet Fenton processes could substantially remove up to 70% of the refractory organics in a membrane bioreactor treated leachate. MDEL assisted Fenton process achieved excellent removal performance of the refractory components, and the effluent chemical oxygen demand concentration was lower than 100 mg L−1. Most organic matters were transformed into smaller compounds with molecular weights less than 1000 Da. Ten different polycyclic aromatic hydrocarbons were detected in the biologically treated leachate, most of which were effectively removed by MDEL-Fenton treatment. MDEL-Fenton process provides powerful capability in degradation of refractory and xenobiotic organic pollutants in landfill leachate and could be adopted as a single-stage polishing process for biologically treated landfill leachate to meet the stringent discharge limit.

Integration of US/Fe2+ and photo-Fenton in sequencing for degradation of landfill leachate

2015 ◽  
Vol 73 (2) ◽  
pp. 260-266 ◽  
Author(s):  
F. G. Zha ◽  
D. X. Yao ◽  
Y. B. Hu ◽  
L. M. Gao ◽  
X. M. Wang
Keyword(s):  
Removal Efficiency ◽  
Landfill Leachate ◽  
Oxygen Demand ◽  
Gas Chromatography Mass Spectrometry ◽  
Fenton Process ◽  
Optimal Conditions ◽  
Initial Concentration ◽  
Toc Removal ◽  
The Us ◽  
Initial Ph

The landfill leachate treated by sonication in presence of Fe2+ (US/Fe2+) and then by photo-Fenton achieved the highest total organic carbon (TOC) removal efficiency among the screened processes. The lower initial pH, dosage of Fe2+ and initial concentration of leachate were helpful in raising TOC removal efficiency of leachate by US/Fe2+. The optimal conditions for the US-photo-Fenton process were as follows: initial pH at 3.0, [H2O2]/[TOC0] at 2, [H2O2]/[Fe2+] at 5 and initial concentration of landfill leachate at 600 mg/L. The removal efficiency of TOC, chemical oxygen demand (COD) and 5-day biochemical oxygen demand (BOD5) were 68.3, 79.6 and 58.2%, while the BOD5/COD rose from 0.20 to 0.43 at optimum condition. Based on gas chromatography–mass spectrometry (GC-MS) results, 36 of a total of 56 pollutants were completely degraded by US-photo-Fenton treatment.

Treatment of a complex landfill leachate with peat

1978 ◽  
Vol 5 (1) ◽  
pp. 83-97 ◽  
Author(s):  
Robert D. Cameron
Keyword(s):  
Chemical Oxygen Demand ◽  
Ferric Chloride ◽  
Landfill Leachate ◽  
Metal Removal ◽  
Oxygen Demand ◽  
Treatment Method ◽  
Manganese Concentration ◽  
Chemical Pretreatment ◽  
Iron Manganese

The use of cheap, locally available peat as a treatment method for landfill leachate was investigated by passing leachate through plexiglass columns filled with an amorphous-granular peat. Preliminary adjustment of pH showed that reducing pH to 4.8 dramatically reduced adsorption. Increasing the pH to 8.4, metal removal was increased owing to filtration of precipitated metals. The best adsorption of metals occurred at the 'natural' pH of 7.1. Manganese was found to be the limiting pollutant. At the 0.05 mg/ℓ maximum acceptable manganese concentration 94% of the total metals were removed, requiring 159 kg of peat per 1000 ℓ of leachate.Resting the peat for 1 month did significantly increase removal capacity.Desorption of some contaminants occurred when water was percolated through the peat. The desorption test effluent was not toxic to fish although iron, lead and COD (chemical oxygen demand) exceeded acceptable values.Chemical pretreatment using lime and ferric chloride achieved significant iron, manganese and calcium removals. Chemical pretreatment followed by peat adsorption offered no advantage other than reducing toxicity to fish.Peat treatment alone was effective in reducing concentrations to a level that was non-toxic to fish.

Chemical safety assessment of transformation products of landfill leachate formed during the Fenton process

2021 ◽  
pp. 126438
Author(s):  
Luana de Morais e Silva ◽  
Vinicius M. Alves ◽  
Edilma R.B. Dantas ◽  
Luciana Scotti ◽  
Wilton Silva Lopes ◽  
...  
Keyword(s):  
Landfill Leachate ◽  
Safety Assessment ◽  
Transformation Products ◽  
Fenton Process ◽  
Chemical Safety
Sign in / Sign up

Export Citation Format

Share Document