scholarly journals Radial Basis Function Neural Network Application to Measurement and Control of Shunt Reactor Overvoltages Based on Analytical Rules

2012 ◽  
Vol 2012 ◽  
pp. 1-14 ◽  
Author(s):  
Iman Sadeghkhani ◽  
Abbas Ketabi ◽  
Rene Feuillet
Keyword(s):  
Neural Network ◽  
Power System ◽  
Radial Basis Function ◽  
Basis Function ◽  
Early Stage ◽  
Rbf Neural Network ◽  
Test System ◽  
Worst Case ◽  
Shunt Reactor ◽  
Radial Basis

This paper presents an artificial intelligence application to measure switching overvoltages caused by shunt reactor energization by applying analytical rules. In a small power system that appears in an early stage of a black start of a power system, an overvoltage could be caused by core saturation on the energization of a reactor with residual flux. A radial basis function (RBF) neural network has been used to estimate the overvoltages due to reactor energization. Equivalent circuit parameters of network have been used as artificial neural network (ANN) inputs; thus, RBF neural network is applicable to every studied system. The developed ANN is trained with the worst case of the switching angle and remanent flux and tested for typical cases. The simulated results for a partial of 39-bus New England test system show that the proposed technique can measure the peak values and duration of switching overvoltages with good accuracy.

scholarly journals Radial Basis Function Neural Network Application to Power System Restoration Studies

2012 ◽  
Vol 2012 ◽  
pp. 1-10 ◽  
Author(s):  
Iman Sadeghkhani ◽  
Abbas Ketabi ◽  
Rene Feuillet
Keyword(s):  
Neural Network ◽  
Power System ◽  
Radial Basis Function ◽  
Basis Function ◽  
Test System ◽  
Case Scenario ◽  
Worst Case ◽  
Power System Restoration ◽  
Radial Basis ◽  
System Restoration

One of the most important issues in power system restoration is overvoltages caused by transformer switching. These overvoltages might damage some equipment and delay power system restoration. This paper presents a radial basis function neural network (RBFNN) to study transformer switching overvoltages. To achieve good generalization capability for developed RBFNN, equivalent parameters of the network are added to RBFNN inputs. The developed RBFNN is trained with the worst-case scenario of switching angle and remanent flux and tested for typical cases. The simulated results for a partial of 39-bus New England test system show that the proposed technique can estimate the peak values and duration of switching overvoltages with good accuracy.

The Research Based on RBF Neural Network in the Power of Prediction of Grain Depot

2012 ◽  
Vol 182-183 ◽  
pp. 1358-1361
Author(s):  
Le Xiao ◽  
Min Peng Hu
Keyword(s):  
Neural Network ◽  
Time Series ◽  
Prediction Model ◽  
Radial Basis Function ◽  
Basis Function ◽  
Rbf Neural Network ◽  
Electricity Consumption ◽  
Nonlinear Time Series ◽  
Modeling And Prediction ◽  
Radial Basis

According to the fact that the use of electricity in grain depot is nonlinear time series, the article introduces the prediction model of electricity based on Radial Basis Function Neural Network, and conducts the modeling and prediction by adopting the historical electricity consumption of a typical grain depot. As the result of simulation shows, the model obtains better forecasting results in grain depot electricity.

scholarly journals A Novel Evaluation Model for Urban Smart Growth Based on Principal Component Regression and Radial Basis Function Neural Network

2019 ◽  
Vol 11 (21) ◽  
pp. 6125
Author(s):  
Lianyan Li ◽  
Xiaobin Ren
Keyword(s):  
Neural Network ◽  
Radial Basis Function ◽  
Basis Function ◽  
Rbf Neural Network ◽  
Evaluation Model ◽  
Smart Growth ◽  
Principal Component Regression ◽  
Principal Component ◽  
Self Organizing Map ◽  
Radial Basis

Smart growth is widely adopted by urban planners as an innovative approach, which can guide a city to develop into an environmentally friendly modern city. Therefore, determining the degree of smart growth is quite significant. In this paper, sustainable degree (SD) is proposed to evaluate the level of urban smart growth, which is established by principal component regression (PCR) and the radial basis function (RBF) neural network. In the case study of Yumen and Otago, the SD values of Yumen and Otago are 0.04482 and 0.04591, respectively, and both plans are moderately successful. Yumen should give more attention to environmental development while Otago should concentrate on economic development. In order to make a reliable future plan, a self-organizing map (SOM) is conducted to classify all indicators and the RBF neural network-trained indicators are separate under different classifications to output new plans. Finally, the reliability of the plan is confirmed by cellular automata (CA). Through simulation of the trend of urban development, it is found that the development speed of Yumen and Otago would increase slowly in the long term. This paper provides a powerful reference for cities pursuing smart growth.

scholarly journals Upset Prediction in Friction Welding Using Radial Basis Function Neural Network

2013 ◽  
Vol 2013 ◽  
pp. 1-9
Author(s):  
Wei Liu ◽  
Feifan Wang ◽  
Xiawei Yang ◽  
Wenya Li
Keyword(s):  
Neural Network ◽  
Finite Element ◽  
Radial Basis Function ◽  
Basis Function ◽  
Welded Joints ◽  
Friction Welding ◽  
Rbf Neural Network ◽  
Finite Element Simulations ◽  
Welding Parameters ◽  
Radial Basis

This paper addresses the upset prediction problem of friction welded joints. Based on finite element simulations of inertia friction welding (IFW), a radial basis function (RBF) neural network was developed initially to predict the final upset for a number of welding parameters. The predicted joint upset by the RBF neural network was compared to validated finite element simulations, producing an error of less than 8.16% which is reasonable. Furthermore, the effects of initial rotational speed and axial pressure on the upset were investigated in relation to energy conversion with the RBF neural network. The developed RBF neural network was also applied to linear friction welding (LFW) and continuous drive friction welding (CDFW). The correlation coefficients of RBF prediction for LFW and CDFW were 0.963 and 0.998, respectively, which further suggest that an RBF neural network is an effective method for upset prediction of friction welded joints.

scholarly journals Optimized Radial Basis Function Neural Network Based Intelligent Control Algorithm of Unmanned Surface Vehicles

2020 ◽  
Vol 8 (3) ◽  
pp. 210 ◽  
Author(s):  
Renqiang Wang ◽  
Donglou Li ◽  
Keyin Miao
Keyword(s):  
Neural Network ◽  
Sliding Mode Control ◽  
Radial Basis Function ◽  
Intelligent Control ◽  
Basis Function ◽  
Control Algorithm ◽  
Sliding Mode ◽  
Rbf Neural Network ◽  
Unmanned Surface Vehicles ◽  
Radial Basis

To improve the tracking stability control of unmanned surface vehicles (USVs), an intelligent control algorithm was proposed on the basis of an optimized radial basis function (RBF) neural network. The design process was as follows. First, the adaptation value and mutation probability were modified to improve the traditional optimization algorithm. Then, the improved genetic algorithms (GA) were used to optimize the network parameters online to improve their approximation performance. Additionally, the RBF neural network was used to approximate the function uncertainties of the USV motion system to eliminate the chattering caused by the uninterrupted switching of the sliding surface. Finally, an intelligent control law was introduced based on the sliding mode control with the Lyapunov stability theory. The simulation tests showed that the intelligent control algorithm can effectively guarantee the control accuracy of USVs. In addition, a comparative study with the sliding mode control algorithm based on an RBF network and fuzzy neural network showed that, under the same conditions, the stabilization time of the intelligent control system was 33.33% faster, the average overshoot was reduced by 20%, the control input was smoother, and less chattering occurred compared to the previous two attempts.

Performance Assessment of Hydraulic Servo System Based on Radial Basis Function Neural Network and Mahalanobis Distance

2015 ◽  
Vol 764-765 ◽  
pp. 613-618
Author(s):  
Zhen Ya Wang ◽  
Chen Lu ◽  
Hong Mei Liu ◽  
Zi Han Chen
Keyword(s):  
Neural Network ◽  
Radial Basis Function ◽  
Performance Assessment ◽  
Basis Function ◽  
Mahalanobis Distance ◽  
Rbf Neural Network ◽  
Residual Error ◽  
Servo Systems ◽  
Radial Basis ◽  
Hydraulic Servo

The performance assessment of hydraulic servo systems has attracted an increasing amount of attention in recent years. However, only a few studies have focused on practical approaches in this field. A performance assessment method based on radial basis function (RBF) neural network and Mahalanobis distance (MD) is proposed in this study; the method is quantized by the performance confidence value (CV). An observer model based on RBF neural network is designed to calculate the residual error between the actual and estimated outputs. The root mean square (RMS), peak value, and average absolute value are then extracted as the features of residual error, which serve as the coordinates of the feature points. Lastly, the MD between the most recent feature point and the constructed Mahalanobis space is calculated. The condition of the system is assessed by normalizing MD into a CV. The proposed method is proven to be effective by a simulation model in which leakage faults are injected. Experimental results show that the proposed method can assess the performance of hydraulic servo systems effectively.

Sign in / Sign up

Export Citation Format

Share Document