scholarly journals Long-Term Biostability of Pet Vascular Prostheses

2012 ◽  
Vol 2012 ◽  
pp. 1-14 ◽  
Author(s):  
Florence Dieval ◽  
Foued Khoffi ◽  
Riaz Mir ◽  
Walid Chaouch ◽  
Didier Le Nouen ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Manufacturing Process ◽  
Vascular Prosthesis ◽  
Chemical Degradation ◽  
Medical Complications ◽  
Human Metabolism ◽  
Vascular Prostheses ◽  
In Vivo Degradation

PET Vascular prostheses are susceptible to physical modification and chemical degradation leading sometimes to global deterioration and rupture of the product. To understand the mechanisms of degradation, we studied 6 vascular prostheses that were explanted due to medical complications. We characterized their level of degradation by comparing them with a virgin prosthesis and carried out physicochemical and mechanical analyses. Results showed an important reduction of the fabric’s mechanical properties in specific areas. Moreover, PET taken from these areas exhibited structural anomalies and was highly degraded even in virgin prostheses. These results suggest that vascular prostheses have weak areas prior to implantation and that these areas are much more prone to in vivo degradation by human metabolism. Manufacturing process could be responsible for these weaknesses as well as designing of the compound. Therefore, we suggest that a more controlled manufacturing process could lead to a vascular prosthesis with enhanced lifespan.

Mechanical Properties of Epoxy Adhesive Under Thermal Aging and Their Chemical Degradation Behavior

2021 ◽  
Vol 21 (8) ◽  
pp. 4444-4449
Author(s):  
Bongjin Chung ◽  
Shin Sungchul ◽  
Jaeho Shim ◽  
Seongwoo Ryu
Keyword(s):  
Mechanical Properties ◽  
Thermal Aging ◽  
Photoelectron Spectroscopy ◽  
Thermal Exposure ◽  
Chain Scission ◽  
Epoxy Adhesive ◽  
Chemical Degradation ◽  
Adhesive Properties ◽  
Noticeable Reduction

Epoxy adhesive was analyzed under long term thermal aging and mechanical properties and chemical degradation were observed by X-ray photoelectron spectroscopy (XPS). Long term thermal exposure of epoxy causes a noticeable reduction in adhesive properties. We developed a predictive model of temperature and time dependent aging. The temperature dependent aging behavior of epoxy adhesive shows good agreement with conventional Arrhenius equations. Using XPS analysis, we also discovered a correlation between chemical degradation and the adhesive properties. Decay of C–C bonding ratio induced chain-scission of epoxy adhesive; increase of total numbers of C–O and C═O induced oxidation of epoxy adhesive during thermal exposure.

In Vitro and In Vivo Degradation, Mechanical Properties, and Histocompatibility of Weft-Knitted Silk Mesh-Like Grafts

2022 ◽  
Vol 12 (2) ◽  
pp. 411-416
Author(s):  
Liang Tang ◽  
Si-Yu Zhao ◽  
Ya-Dong Yang ◽  
Geng Yang ◽  
Wen-Yuan Zhang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Simulated Body Fluid ◽  
Body Fluid ◽  
Degradation Rate ◽  
Maximum Load ◽  
Artificial Ligament ◽  
In Vivo Degradation

To investigate the degradation, mechanical properties, and histocompatibility of weft-knitted silk mesh-like grafts, we carried out the In Vitro and In Vivo silk grafts degradation assay. The In Vitro degradation experiment was performed by immersing the silk grafts in simulated body fluid for 1 year, and the results showed that the degradation rate of the silk mesh-like grafts was very slow, and there were few changes in the mechanical properties and quality of the silk mesh-like graft. In Vivo degradation assay was taken by implantation of the silk mesh-like grafts into the subcutaneous muscles of rabbits. At 3, 6, and 12 months postoperation, the rate of mass loss was 19.36%, 31.84%, and 58.77%, respectively, and the maximum load was 63.85%, 34.63%, and 10.76%, respectively of that prior to degradation. The results showed that the degradation rate of the silk graft and the loss of mechanical properties In Vivo were faster than the results obtained in the In Vitro experiments. In addition, there were no significant differences in secretion of serum IL-6 and TNF-α between the experimental and normal rabbits (P >0.05), suggesting no obvious inflammatory reaction. The findings suggest that the weft-knitted silk mesh-like grafts have good mechanical properties, histocompatibility, and In Vivo degradation rate, and therefore represent a candidate material for artificial ligament

In vivo degradation of poly(DTE carbonate) membranes. Analysis of the tissue reactions and mechanical properties

2007 ◽  
Vol 19 (1) ◽  
pp. 53-58 ◽  
Author(s):  
Antti J. Asikainen ◽  
Mika Pelto ◽  
Jukka Noponen ◽  
Minna Kellomäki ◽  
Harri Pihlajamäki ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tissue Reactions ◽  
In Vivo Degradation

scholarly journals Fabrication, Crystalline Behavior, Mechanical Property and In-Vivo Degradation of Poly(l–lactide) (PLLA)–Magnesium Oxide Whiskers (MgO) Nano Composites Prepared by In-Situ Polymerization

Polymers ◽  
2019 ◽  
Vol 11 (7) ◽  
pp. 1123 ◽  
Author(s):  
Hui Liang ◽  
Yun Zhao ◽  
Jinjun Yang ◽  
Xiao Li ◽  
Xiaoxian Yang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Magnesium Oxide ◽  
Bone Repair ◽  
In Situ Polymerization ◽  
Resonance Spectroscopy ◽  
Scanning Calorimetry ◽  
Biomedical Material ◽  
In Vivo Degradation

The present work focuses on the preparation of poly(l–lactide)–magnesium oxide whiskers (PLLA–MgO) composites by the in-situ polymerization method for bone repair and implant. PLLA–MgO composites were evaluated using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and solid-state 13C and 1H nuclear magnetic resonance spectroscopy (NMR). It was found that the whiskers were uniformly dispersed in the PLLA matrix through the interfacial interaction bonding between PLLA and MgO; thereby, the MgO whisker was found to be well-distributed in the PLLA matrix, and biocomposites with excellent interface bonding were produced. Notably, the MgO whisker has an effect on the crystallization behavior and mechanical properties; moreover, the in vivo degradation of PLLA–MgO composites could also be adjusted by MgO. These results show that the whisker content of 0.5 wt % and 1.0 wt % exhibited a prominent nucleation effect for the PLLA matrix, and specifically 1.0 wt % MgO was found to benefit the enhanced mechanical properties greatly. In addition, the improvement of the degrading process of the composite illustrated that the MgO whisker can effectively regulate the degradation of the PLLA matrix as well as raise its bioactivity. Hence, these results demonstrated the promising application of PLLA–MgO composite to serve as a biomedical material for bone-related repair.

Chronic effects of muscle and nerve-directed stretching on tissue mechanics

2020 ◽  
Vol 129 (5) ◽  
pp. 1011-1023 ◽  
Author(s):  
Ricardo J. Andrade ◽  
Sandro R. Freitas ◽  
François Hug ◽  
Guillaume Le Sant ◽  
Lilian Lacourpaille ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Sciatic Nerve ◽  
Peripheral Nerves ◽  
Tissue Mechanics ◽  
Plantar Flexor ◽  
Chronic Effects ◽  
Flexor Muscles ◽  
Plantar Flexor Muscles

This study demonstrates that the mechanical properties of plantar flexor muscles and sciatic nerve can adapt mechanically to long-term stretching programs. Although interventions targeting muscular or nonmuscular structures are both effective at increasing maximal range of motion, the changes in tissue mechanical properties (stiffness) are specific to the structure being preferentially stretched by each program. We provide the first in vivo evidence that stiffness of peripheral nerves adapts to long-term loading stimuli using appropriate nerve-directed stretching.

Surface Corrosion of Nanoscaled Hydroxyapatite During an In Vivo Experiment

2015 ◽  
Vol 15 (10) ◽  
pp. 7976-7979 ◽  
Author(s):  
Dong Seok Seo ◽  
Jong Kook Lee ◽  
Kyu Hong Hwang
Keyword(s):  
Mechanical Properties ◽  
Grain Boundary ◽  
Biological Properties ◽  
Implant Surface ◽  
Particle Generation ◽  
Surface Corrosion ◽  
Osteoclast Resorption ◽  
Hydroxyapatite Implant

Hydroxyapatite (HA) is widely used as a bioactive ceramics as it forms a chemical bond with bone. However, the drawback to using this material is its inferior mechanical properties. In this research, surface corrosion and disintegration of nanoscaled HA in a dog were studied, and the mechanism by which phase-pure HA dissolved In Vivo was investigated. Biological properties of HA In Vivo are affected by the grain-boundary dissolution followed by a surface corrosion and microstructural disintegration. This kind of dissolution process, apparently evidenced at the grain boundary, causes particle generation, which indicates that both long-term bone in-growth and mechanical properties can dramatically deteriorate. Implant dissolution by osteoclasts In Vivo is also observed on the surface of hydroxyapatite. Implant surface showed an aggressive corrosion by an osteoclast resorption. Severe and deeper dissolution underwent close to osteoclast resulting in formation of smaller and more round particle shape.

scholarly journals BIODEGRADABLE VASCULAR GRAFT REINFORCED WITH A BIODEGRADABLE SHEATH

2019 ◽  
Vol 8 (2) ◽  
pp. 87-97
Author(s):  
L. V. Antonova ◽  
E. O. Krivkina ◽  
M. A. Rezvova ◽  
V. V. Sevost'yanova ◽  
A. V. Mironov ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Growth Factor ◽  
Carotid Artery ◽  
Vascular Grafts ◽  
Small Diameter ◽  
Fold Increase ◽  
Layer By Layer ◽  
Layer Coating

Background. Tissue-engineered vascular grafts can be reinforced by a biostable or biodegradable polymer sheath. A combination of electrospinning, routinely used for fabrication of biodegradable tubular grafts, and the layer-by-layer coating allows forming a polymeric sheath ensuring long-term integrity and high biocompatibility of the vascular grafts after the implantation. Aim To evaluate mechanical properties and in vivo performance of biodegradable small-diameter vascular grafts with a reinforcing sheath.Methods. Tubular grafts (4 mm diameter) were fabricated from poly(3-hydroxybutyrate-co3-hydroxyvalerate) and poly(ε-caprolactone) by emulsion electrospinning with the incorporation of vascular endothelial growth factor (VEGF) into the inner third of the graft and basic fibroblast growth factor (bFGF) along with stromal cell-derived factor-1α (SDF-1α) into the outer two thirds of the graft wall. Poly(ε-caprolactone) sheath was formed by the layer-by-layer coating. Upon graft fabrication, scanning electron microscopy was performed to assess the grafts’ surface, tensile testing allowed evaluating mechanical properties. The samples were implanted into the ovine carotid artery (n = 5 animals) for 12 months with the subsequent histological examination.Results. Sintering temperature of 160°C during the extrusion allowed effective and delicate merging of poly(ε-caprolactone) coating with the outer surface of the poly(3hydroxybutyrate-co-3-hydroxyvalerate)/poly(ε-caprolactone) tubular graft. The thickness of poly(ε-caprolactone) fiber was 380–400 μm, the increment of the reinforcing filament was 1 mm. The reinforcing sheath led to a 3-fold increase in durability and elastic modulus of the vascular grafts. At the 12-months follow-up, the grafts reported retained integrity. No signs of inflammation or calcification were found.Conclusion. The poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and poly(ε-caprolactone) vascular grafts with hierarchically incorporated growth factors and the reinforced poly(ε-caprolactone) spiral sheath demonstrated improved mechanical properties while retaining integrity and high biocompatibility after the long-term implantation into the ovine carotid artery.

Manufacturing, oxidation, mechanical properties and clinical performance of highly cross-linked polyethylene in total hip arthroplasty

2018 ◽  
Vol 28 (6) ◽  
pp. 573-583 ◽  
Author(s):  
Gurpreet Singh ◽  
Robert Klassen ◽  
James Howard ◽  
Douglas Naudie ◽  
Matthew Teeter ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Total Hip Arthroplasty ◽  
Hip Arthroplasty ◽  
First Generation ◽  
Clinical Performance ◽  
Wear Rates ◽  
Total Hip ◽  
Uhmwpe Wear

Ultra-high molecular weight polyethylene (UHMWPE) continues to be the gold standard bearing surface in total hip arthroplasty (THA) for nearly 5 decades. Highly cross-linked UHMWPE (HXLPE) was adapted for routine use in the early 2000s to reduce the revision rates related to wear, osteolysis, and aseptic loosening resulting from conventional UHMWPE wear. Since its inception, consistent evidence showing reduced wear rates and osteolysis supports the use of HXLPE in THA. High quality studies demonstrating the advantage in long term survivorship of HXLPE over conventional UHMWPE are emerging. Though retrieval studies have demonstrated evidence of in vivo oxidation and fatigue related damage at the rim of the first generation HXLPE liners, clinical significance of this remains to be seen. Second-generation sequentially annealed and vitamin E containing HXLPE liners demonstrate improved mechanical properties, resistance to oxidation, and equivalent wear rates in comparison to their first-generation counterparts, but long term success remains to be seen.

scholarly journals Zircônia tetragonal estabilizada por ítria: comportamento mecânico, adesão e longevidade clínica

Cerâmica ◽  
2013 ◽  
Vol 59 (352) ◽  
pp. 633-639 ◽  
Author(s):  
Y. D. Belo ◽  
Q. N. Sonza ◽  
M. Borba ◽  
A. D. Bona
Keyword(s):  
Mechanical Properties ◽  
Clinical Trials ◽  
Transformation Toughening

A zircônia tetragonal policristalina estabilizada por ítria (Y-TZP) vem sendo amplamente empregada na Odontologia como material de infraestrutura (IE) de coroas e próteses parciais fixas devido às suas características mecânicas como alta resistência e tenacidade à fratura. O objetivo desta revisão de literatura é buscar evidências em estudos in vitro e in vivo a respeito do comportamento mecânico, adesão e longevidade clínica de próteses fixas confeccionadas com IE de Y-TZP. Foram obtidos artigos, na base de dados online Medline/Pubmed, seguindo a seguinte combinação de palavras-chaves: zircônia tetragonal estabilizada por ítria ("Y-TZP"), adesão ("adhesion"; "bonding"), propriedades mecânicas ("mechanical properties"), estudos clínicos ("long-term clinical trials"), longevidade ("longevity"). A busca abrangeu os anos de 1990 a 2012. De acordo com a literatura, a Y-TZP apresenta propriedades mecânicas superiores às demais cerâmicas odontológicas devido a um mecanismo de tenacificação associado à transformação de fase cristalina (transformation toughening). Ainda, a silicatização associada a silanização tem sido indicada como o tratamento de superfície mais adequado para cimentação adesiva de IE em Y-TZP, além do uso de um cimento resinoso contendo monômeros fosfatados (MDP). Nos estudos clínicos, a Y-TZP tem mostrado altas taxas de sucesso como IE de coroas unitárias e PPFs. Apesar do comportamento mecânico e de união da Y-TZP não estarem completamente esclarecidos, estudos apontam resultados promissores em relação à aplicação clínica deste material.

Sign in / Sign up

Export Citation Format

Share Document