scholarly journals Fabrication of Aligned Side-by-Side TiO2/SnO2Nanofibers via Dual-Opposite-Spinneret Electrospinning

2012 ◽  
Vol 2012 ◽  
pp. 1-5 ◽  
Author(s):  
Fu Xu ◽  
Luming Li ◽  
Xiaojie Cui
Keyword(s):  
Crystal Structure ◽  
Thermal Analysis ◽  
Differential Thermal Analysis ◽  
Thermal Degradation ◽  
Anatase Phase ◽  
Electrospun Fibers ◽  
X Ray Diffraction ◽  
X Ray ◽  
Bicomponent Fibers ◽  
Photocatalytic Materials

Well-aligned and uniform side-by-side bicomponent fibers have been produced via dual-opposite-spinneret electrospinning. Side-by-side TiO2/SnO2nanofibers were obtained after calcining as-spun fibers. The thermal degradation of the electrospun fibers was evaluated using combined thermogravimetry and differential thermal analysis (TG-DTA), and the crystal structure of calcined nanofibers was investigated by X-ray diffraction (XRD). The fabricated TiO2/SnO2nanofibers expose both TiO2mainly consisting of anatase phase and rutile-type SnO2to the surface, which is appropriate for photocatalytic materials.

Crystal growth and structure analysis of Sm2−xCexCuO4

2000 ◽  
Vol 15 (9) ◽  
pp. 1905-1910 ◽  
Author(s):  
H. Takeda ◽  
M. Okuno ◽  
M. Ohgaki ◽  
K. Yamashita ◽  
T. Matsumoto
Keyword(s):  
Crystal Structure ◽  
Thermal Analysis ◽  
Phase Diagram ◽  
Differential Thermal Analysis ◽  
Floating Zone ◽  
X Ray Diffraction ◽  
Zone Method ◽  
Floating Zone Method ◽  
X Ray ◽  
Quench Method

The phase diagram of the Sm2O3–CuO system was investigated by the combination of the differential thermal analysis and the quench method. The results showed that Sm2CuO4 incongruently melts at about 1220 °C, and that the solid Sm2CuO4 exists in equilibrium with the liquid consisting of 81–95 mol% CuO in the range of 1060–1220 °C. On the basis of the phase diagram, Sm2−xCexCuO4 single crystals were grown by the traveling solvent floating zone method. The crystal structure [space group I4/mmm, a = 3.917(1), c 4 11.899(2) Å] has been refined using single-crystal x-ray diffraction data with a precision corresponding to an R index of 0.02.

A tetranuclear copper (II) complex with pyrazole-3,5-dicarboxylate ligands: synthesis, characterization and electrochemical properties

2016 ◽  
Vol 71 (4) ◽  
pp. 305-310 ◽  
Author(s):  
Selçuk Demir ◽  
Hamide Merve Çepni ◽  
Małgorzata Hołyńska ◽  
Muammer Kavanoz
Keyword(s):  
Crystal Structure ◽  
Thermal Analysis ◽  
Differential Thermal Analysis ◽  
Hydrogen Bonds ◽  
Room Temperature ◽  
Magnetic Measurements ◽  
Metal Oxidation ◽  
X Ray Diffraction ◽  
X Ray ◽  
Complex Anions

AbstractA tetranuclear copper (II) complex with pyrazole-3,5-dicarboxylate ligands (pdc3−), [Me2NH2]4[Cu4(pdc)4], was synthesized using solvothermal and metal oxidation routes and characterized by elemental analysis, infrared, thermogravimetry/differential thermal analysis, and room-temperature magnetic measurements. The structure of the complex was determined by single-crystal X-ray diffraction. It comprises dimethylammonium cations and complex anions containing four Cu2+ cations. The crystal structure is stabilized by N–H···O hydrogen bonds. In addition, the electrochemical behavior was studied.

PENINGKATAN LAJU DISOLUSI ACYCLOVIR DENGAN METODE SISTEM DISPERSI PADAT MENGGUNAKAN POLOXAMER 188

2016 ◽  
Vol 5 (1) ◽  
pp. 6
Author(s):  
Budi Setiawan ◽  
Erizal Zaini ◽  
Salman Umar
Keyword(s):  
Electron Microscopy ◽  
Thermal Analysis ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Differential Thermal Analysis ◽  
Fourier Transform Infrared ◽  
X Ray Diffraction ◽  
Poloxamer 188 ◽  
X Ray ◽  
Scanning Electron

Sebuah penelitian tentang sistem dispersi padat dari asiklovir dengan poloxamer 188 telah dilakukan formulasi dengan pencampuran secara fisika dengan rasio 1 : 1, 1 : 3, 1 : 5 dan dispersi padat 1 : 1, 1 : 3, 1 : 5 dan penggilingan 1:1 sebagai pembanding. Dispersi padat dibuat menggunakan metode pencairan (fusi), yang digabung dengan poloxamer 188 pada hotplate kemudian asiklovir dimasukkan ke dalam hasil poloxamer 188 lalu di kocok hingga membentuk masa homogen. Semua formula yang terbentuk termasuk asiklovir poloxamer 188 murni dianalisis karakterisasinya dengan Differential Thermal Analysis (DTA), X-ray Diffraction, Scanning Electron Microscopy (SEM), dan Fourier Transform Infrared (FTIR), kemudian pengambilan dilakukan  (penentuan kadar) mengunakan spektrofotometer UV pada panjang gelombang 257,08 nm dan uji laju disolusi dengan aquadest bebas CO2 menggunakan metode dayung. Hasil pengambilan  (penentuan kadar) menunjukkan bahwa semua formula memenuhi persyaratan farmakope Amerika edisi 30 dan farmakope Indonesia edisi 4 yaitu 95-110%. Sedangkan hasil uji laju disolusi untuk campuran fisik 1: 1, dan dispersi padat 1: 1, dan penggilingan 1: 1 menunjukkan peningkatan yang nyata dibandingkan asiklovir murni. Hal ini juga dapat dilihat dari hasil perhitungan statistik  menggunakan analisis varian satu arah  SPSS 17.

Synthesis, crystal structure, luminescence, and photocatalytic properties of a 2D Cu(II) metal-organic frameworks based on 3,5-di(1H-benzimidazol-1-yl)pyridine and 4,4′-oxybis(benzoate) ligands

2020 ◽  
Vol 75 (8) ◽  
pp. 727-732
Author(s):  
Chen Zhang ◽  
Jian-Qing Tao
Keyword(s):  
Crystal Structure ◽  
Thermal Analysis ◽  
Uv Light ◽  
Metal Organic Framework ◽  
Metal Organic Frameworks ◽  
X Ray Diffraction ◽  
X Ray ◽  
Uv Light Irradiation ◽  
Photocatalytic Activities ◽  
Metal Organic

AbstractA new Cu(II) metal-organic framework, [Cu(L)(OBA)·H2O]n (1) [H2OBA = 4,4′-oxybis(benzoic acid), L = 3,5-di(1H-benzimidazol-1-yl)pyridine] was hydrothermally synthesized and characterized through IR spectroscopy, elemental and thermal analysis and single-crystal X-ray diffraction. Complex 1 is a four-connected uni-nodal 2D net with a (44·62) topology which shows an emission centered at λ ∼393 nm upon excitation at λ = 245 nm. Moreover, complex 1 possesses high photocatalytic activities for the decomposition of Rhodamine B (RhB) under UV light irradiation.

scholarly journals The Potential for Natural Stones from Northeastern Brazil to Be Used in Civil Construction

Minerals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 440
Author(s):  
Fabiana Pereira da Costa ◽  
Jucielle Veras Fernandes ◽  
Luiz Ronaldo Lisboa de Melo ◽  
Alisson Mendes Rodrigues ◽  
Romualdo Rodrigues Menezes ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Thermal Analysis ◽  
Differential Thermal Analysis ◽  
Chemical Resistance ◽  
Mechanical Analysis ◽  
Northeastern Brazil ◽  
X Ray Diffraction ◽  
X Ray ◽  
Chemical Agents ◽  
Natural Stones

Natural stones (limestones, granites, and marble) from mines located in northeastern Brazil were investigated to discover their potential for use in civil construction. The natural stones were characterized by chemical analysis, X-ray diffraction, differential thermal analysis, and optical microscopy. The physical-mechanical properties (apparent density, porosity, water absorption, compressive and flexural strength, impact, and abrasion) and chemical resistance properties were also evaluated. The results of the physical-mechanical analysis indicated that the natural stones investigated have the potential to be used in different environments (interior, exterior), taking into account factors such as people’s circulation and exposure to chemical agents.

On tungstates of divalent cations (III) – Pb5O2[WO6]

2020 ◽  
Vol 235 (8-9) ◽  
pp. 311-317
Author(s):  
Stephan G. Jantz ◽  
Florian Pielnhofer ◽  
Henning A. Höppe
Keyword(s):  
Crystal Structure ◽  
Thermal Analysis ◽  
Quantum Chemical ◽  
Density Functional ◽  
Divalent Cations ◽  
X Ray Diffraction ◽  
Functional Theory ◽  
X Ray ◽  
First Results ◽  
Electrostatic Calculations

Abstract${\text{Pb}}_{5}{\text{O}}_{2}\left[{\text{WO}}_{6}\right]$ was discovered as a frequently observed side phase during our investigation on lead tungstates. Its crystal structure was solved by single-crystal X-ray diffraction ($P{2}_{1}/n$, $a=7.4379\left(2\right)$ Å, $b=12.1115\left(4\right)$ Å, $c=10.6171\left(3\right)$ Å, $\beta =90.6847\left(8\right)$°, $Z=4$, ${R}_{\text{int}}=0.038$, ${R}_{1}=0.020$, $\omega {R}_{2}=0.029$, 4188 data, 128 param.) and is isotypic with ${\text{Pb}}_{5}{\text{O}}_{2}\left[{\text{Te}}_{6}\right]$. ${\text{Pb}}_{5}{\text{O}}_{2}\left[{\text{WO}}_{6}\right]$ comprises a layered structure built up by non-condensed [WO6]${}^{6-}$ octahedra and ${\left[{\text{O}}_{4}{\text{Pb}}_{10}\right]}^{12+}$ oligomers. The compound was characterised by spectroscopic measurements (Infrared (IR), Raman and Ultraviolet–visible (UV/Vis) spectra) as well as quantum chemical and electrostatic calculations (density functional theory (DFT), MAPLE) yielding a band gap of 2.9 eV fitting well with the optical one of 2.8 eV. An estimation of the refractive index based on the Gladstone-Dale relationship yielded $n\approx 2.31$. Furthermore first results of the thermal analysis are presented.

The Roman Ceramics of Salobrena (Granada-Spain) and their Raw Materials

1992 ◽  
Vol 267 ◽  
Author(s):  
Ana M De Andres ◽  
Isabel MuÑOZ
Keyword(s):  
Thermal Analysis ◽  
Differential Thermal Analysis ◽  
Raw Materials ◽  
Third Century ◽  
Western Coast ◽  
X Ray Diffraction ◽  
X Ray ◽  
The Third ◽  
Good Number ◽  
Scanning Electron

ABSTRACTNineteen roman ceramic sherds found near Salobreña (Granada, Spain), in the western coast of the Mediterranean Sea, as well as different ceramic clays from the surroundingsare studied. Both clays and ceramic sherds are characterizad by X-ray diffraction and spectrometry, differential thermal analysis, and scanning electron and optical microscopies. A good number of the ceramic pieces, among which some “Terrae Sigillatae”, have a composition similar to that of the local clays and, thus, have been probably manufactured at Salobreña. Only a few of them have a foreign origin. For most of them, the firing temperature was about 800-850 °C, although some have been produced at 900-1000 °C, and some others at 1000-1100 °C. It is concluded that Salobreña appearsto have been an important settlement just in the third century of the Christian era.

Synthesis, IR spectrum, thermal behaviour and crystal structure of a novel one-dimensional cyano-bridged zinc(II)/nickel(II) complex

2005 ◽  
Vol 220 (1) ◽  
Author(s):  
Ahmet Karadag ◽  
Hümeyra Pasaoglu ◽  
Gökhan Kastas ◽  
Orhan Büyükgüngör
Keyword(s):  
Crystal Structure ◽  
Thermal Analysis ◽  
Coordination Polymer ◽  
Single Crystal ◽  
Ir Spectrum ◽  
Polymeric Chain ◽  
X Ray Diffraction ◽  
Bimetallic Complex ◽  
One Dimensional ◽  
X Ray

AbstractThe cyano-bridged heteronuclear coordination polymer of zinc(II)/nickel(II) has been prepared by N-(2-hydroxyethyl)-ethylendiamine (hydet-en), alternatively named 2-(2-aminoethylamino)-ethanol and characterised by IR and thermal analysis. In the bimetallic complex, the decomposition of hydet-en ligands is seen to be endothermic whereas that of the cyano ligands is found to be exothermic. The crystal structure of the complex has been determined by single-crystal X-ray diffraction. The crystal structure of the zinc(II)-nickel(II) complex consists of a one-dimensional polymeric chain –Zn(hydet-en)

scholarly journals Silica-Kaolin Mix Effect on Evaporative Pattern Castings Surface Roughness

2016 ◽  
Vol 16 (3) ◽  
pp. 83-88 ◽  
Author(s):  
B.V. Omidiji ◽  
R.H. Khan ◽  
M.S. Abolarin
Keyword(s):  
Thermal Analysis ◽  
Surface Roughness ◽  
Differential Thermal Analysis ◽  
Ratio Method ◽  
Gating System ◽  
X Ray Diffraction ◽  
Pouring Temperature ◽  
Material Loss ◽  
Refractory Coating ◽  
X Ray

Abstract The influence of the refractory coating which is a mixture of silica flour and kaolin on the surface roughness of the plate castings produced using evaporative patterns had been considered in this work. The kaolin was used as a binder and ratio method was employed to form basis for the factorial design of experiment which led to nine runs of experiments. Methyl alcohol at 99% concentration was used as the carrier for the transfer of the coating to the surface of the patterns. Pouring temperature was observed as a process parameter alongside the mix ratios of the coating. Attempts were made to characterize the refractory coating by using two methods; differential thermal analysis (DTA) and X-ray diffraction. Attempt was also made to characterize the casting material. Gating system design was done for the plate casting to determine the correct proportions of the gating parameters in order to construct the gating system properly to avoid turbulence during pouring of liquid metal. A digital profilometer was used to take the measurements of the surface roughness. It was observed that the mix ratio 90% silica flour-10% kaolin produced the lowest value of the surface roughness of the plate castings and had the lowest material loss in the DTA test. The pouring temperature of 650°C produced best casting.

scholarly journals SOLUBILITY OF GERMANIUM DISELENIDE IN THE Cu3AsSe4

2021 ◽  
Vol 0 (4) ◽  
pp. 67-70
Author(s):  
Z.T. Hasanova ◽  
Keyword(s):  
Thermal Analysis ◽  
Differential Thermal Analysis ◽  
Phase Equilibria ◽  
Solid Solutions ◽  
X Ray Diffraction ◽  
X Ray

Differential thermal analysis and powder X-ray diffraction methods were used for phase equilibria studying in the Cu3AsSe4-GeSe2 system. It was established that wide (up to 30 mol.%) solid solutions based on Cu3AsSe4 are formed. GeSe2-rich alloys consist of various heterogeneous mixtures, including phases outside the T–x plane of this section

Sign in / Sign up

Export Citation Format

Share Document