scholarly journals The Conceptual Design of High Pressure Reversible Axial Tunnel Ventilation Fans

2012 ◽  
Vol 2012 ◽  
pp. 1-11 ◽  
Author(s):  
A. G. Sheard ◽  
K. Daneshkhah
Keyword(s):  
High Pressure ◽  
High Speed ◽  
Mechanical Design ◽  
Pressure Rise ◽  
Operating Mode ◽  
Motor Shaft ◽  
Two Stage ◽  
Tunnel Ventilation ◽  
Single Motor ◽  
Tunnel System

Tunnel ventilation fans, classically, must have the ability to both supply and extract air from a tunnel system, with the operator's choice dependent on the tunnel ventilation system's operating mode most appropriate at any given point in time. Consequently, tunnel ventilation fans must incorporate a reversible aerodynamic design which limits the maximum fan pressure rise. This paper presents three high pressure reversible fan concepts. These comprise a two-stage counter rotating fan, a single-stage high speed fan, and a two-stage fan with a single motor and impeller on each end of the motor shaft. The authors consider the relative merits of each concept. The third concept offers the most compact fan, transform, silencer, and damper package size. The authors discuss the mechanical design challenges that occur with a two-stage fan with a single motor and impeller on each end of the motor shaft. They present and consider a selected motor bearing arrangement and casing design for maintainability. Finally, the authors present both prototype fan and full-scale package aerodynamic and acoustic performance, before discussing the challenges presented by high temperature certification in accordance with the requirements of EN 12101-3: 2012.

Cyclone Bomb hits Southern Brazil in 2020

2020 ◽  
Vol 3 (3) ◽  
Author(s):  
Ricardo Gobato ◽  
Alireza Heidari
Keyword(s):  
High Pressure ◽  
Atmospheric Pressure ◽  
High Speed ◽  
Satellite Images ◽  
The State ◽  
Southern Brazil ◽  
Santa Catarina ◽  
High Area ◽  
South Of Brazil ◽  
Rapid Drop

An “explosive extratropical cyclone” is an atmospheric phenomenon that occurs when there is a very rapid drop in central atmospheric pressure. This phenomenon, with its characteristic of rapidly lowering the pressure in its interior, generates very intense winds and for this reason it is called explosive cyclone, bomb cyclone. With gusts recorded of 116 km/h, atmospheric phenomenon – “cyclone bomb” (CB) hit southern Brazil on June 30, the beginning of winter 2020, causing destruction in its influence over. One of the cities most affected was Chapecó, west of the state of Santa Catarina. The satellite images show that the CB generated a low pressure (976 mbar) inside it, generating two atmospheric currents that moved at high speed. In a northwest-southeast direction, Bolivia and Paraguay, crossing the states of Parana and Santa Catarina, and this draft that hit the south of Brazil, which caused the destruction of the affected states.  Another moving to Argentina, southwest-northeast direction, due to high area of high pressure (1022 mbar). Both enhanced the phenomenon.

YSS YXM4

Alloy Digest ◽  
2019 ◽  
Vol 68 (11) ◽  
Keyword(s):  
High Pressure ◽  
High Temperature ◽  
Physical Properties ◽  
Tool Steel ◽  
High Speed ◽  
Temperature Performance

Abstract YSS YXM4 is a cobalt-alloyed molybdenum high-speed tool steel with resistance to abrasion, seizure, and deformation under high pressure. This datasheet provides information on composition, physical properties, and hardness. It also includes information on high temperature performance. Filing Code: TS-780. Producer or source: Hitachi Metals America, Ltd.

scholarly journals High-Speed 3D Printing of High-Performance Thermosetting Polymers via Two-Stage Curing

2018 ◽  
Vol 39 (7) ◽  
pp. 1700809 ◽  
Author(s):  
Xiao Kuang ◽  
Zeang Zhao ◽  
Kaijuan Chen ◽  
Daining Fang ◽  
Guozheng Kang ◽  
...  
Keyword(s):  
3D Printing ◽  
High Speed ◽  
High Performance ◽  
Two Stage ◽  
Thermosetting Polymers

Experimental investigation of wall heat transfer due to spray combustion in a high-pressure/high-temperature vessel

2021 ◽  
pp. 146808742110072
Author(s):  
Karri Keskinen ◽  
Walter Vera-Tudela ◽  
Yuri M Wright ◽  
Konstantinos Boulouchos
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
High Pressure ◽  
High Temperature ◽  
High Speed ◽  
Transfer Problem ◽  
Wall Heat Transfer ◽  
Gas Temperature ◽  
Reference Case ◽  
High Pressure High Temperature

Combustion chamber wall heat transfer is a major contributor to efficiency losses in diesel engines. In this context, thermal swing materials (adapting to the surrounding gas temperature) have been pinpointed as a promising mitigative solution. In this study, experiments are carried out in a high-pressure/high-temperature vessel to (a) characterise the wall heat transfer process ensuing from wall impingement of a combusting fuel spray, and (b) evaluate insulative improvements provided by a coating that promotes thermal swing. The baseline experimental condition resembles that of Spray A from the Engine Combustion Network, while additional variations are generated by modifying the ambient temperature as well as the injection pressure and duration. Wall heat transfer and wall temperature measurements are time-resolved and accompanied by concurrent high-speed imaging of natural luminosity. An investigation with an uncoated wall is carried out with several sensor locations around the stagnation point, elucidating sensor-to-sensor variability and setup symmetry. Surface heat flux follows three phases: (i) an initial peak, (ii) a slightly lower plateau dependent on the injection duration, and (iii) a slow decline. In addition to the uncoated reference case, the investigation involves a coating made of porous zirconia, an established thermal swing material. With a coated setup, the projection of surface quantities (heat flux and temperature) from the immersed measurement location requires additional numerical analysis of conjugate heat transfer. Starting from the traces measured beneath the coating, the surface quantities are obtained by solving a one-dimensional inverse heat transfer problem. The present measurements are complemented by CFD simulations supplemented with recent rough-wall models. The surface roughness of the coated specimen is indicated to have a significant impact on the wall heat flux, offsetting the expected benefit from the thermal swing material.

scholarly journals Research on aerodynamic characteristics of two-stage axial micro air turbine spindle for small parts machining

2020 ◽  
Vol 12 (12) ◽  
pp. 168781402098437
Author(s):  
Liu Jiang ◽  
Guo Zhiping ◽  
Miao Shujing ◽  
He Xiangxin ◽  
Zhu Xinyu
Keyword(s):  
High Speed ◽  
Aerodynamic Characteristics ◽  
Maximum Efficiency ◽  
Two Stage ◽  
Output Torque ◽  
Air Turbine ◽  
Solid Foundation ◽  
Computational Fluid Dynamics Cfd ◽  
Micro Machine ◽  
Small Parts

In order to meet the requirements of output torque, efficiency and compact shape of micro-spindles for small parts machining, a two-stage axial micro air turbine spindle with an axial inlet and outlet is proposed. Based on the k-ω turbulence model of SST, the flow field and operation characteristics of the two-stage axial micro air turbine spindle were studied using computational fluid dynamics (CFD) combined with an experimental study. We obtained the air turbine spindle under different working conditions of the loss and torque characteristics. When the inlet pressure was 300 KPa, the output speed of the two-stage turbine was 100,000 rpm, 9% higher than that of a single-stage turbine output torque. The total torque reached 6.39 N·mm, and the maximum efficiency of the turbine and the spindle were 42.2% and 32.3%, respectively. Through the research on the innovative structure of the two-stage axial micro air turbine spindle, the overall performance of the principle prototype has been significantly improved and the problems of insufficient output torque and low working efficiency in high-speed micro-machining can be solved practically, which laid a solid foundation for improving the machining efficiency of small parts and reducing the size of micro machine tool.

scholarly journals Cavitation patterns in high-pressure homogenization nozzles with cylindrical orifices: Influence of mixing stream in Simultaneous Homogenization and Mixing

2021 ◽  
Author(s):  
V. Gall ◽  
E. Rütten ◽  
H. P. Karbstein
Keyword(s):  
High Pressure ◽  
Process Design ◽  
High Speed ◽  
State Of The Art ◽  
Back Pressure ◽  
High Pressure Homogenization ◽  
Unit Operation ◽  
Mixing Chamber ◽  
Cavitation Intensity ◽  
Droplet Sizes

AbstractHigh-pressure homogenization is the state of the art to produce high-quality emulsions with droplet sizes in the submicron range. In simultaneous homogenization and mixing (SHM), an additional mixing stream is inserted into a modified homogenization nozzle in order to create synergies between the unit operation homogenization and mixing. In this work, the influence of the mixing stream on cavitation patterns after a cylindrical orifice is investigated. Shadow-graphic images of the cavitation patterns were taken using a high-speed camera and an optically accessible mixing chamber. Results show that adding the mixing stream can contribute to coalescence of cavitation bubbles. Choked cavitation was observed at higher cavitation numbers σ with increasing mixing stream. The influence of the mixing stream became more significant at a higher orifice to outlet ratio, where a hydraulic flip was also observed at higher σ. The decrease of cavitation intensity with increasing back-pressure was found to be identical with conventional high-pressure homogenization. In the future, the results can be taken into account in the SHM process design to improve the efficiency of droplet break-up by preventing cavitation or at least hydraulic flip.

scholarly journals Cycloaddition of Thiourea- and Guanidine-Substituted Furans to Dienophiles: A Comparison of the Environmentally-Friendly Methods

2020 ◽  
Vol 3 (1) ◽  
pp. 57
Author(s):  
Luka Barešić ◽  
Davor Margetić ◽  
Zoran Glasovac
Keyword(s):  
High Pressure ◽  
Functional Groups ◽  
Organic Synthesis ◽  
High Speed ◽  
Environmentally Friendly ◽  
Microwave Assisted ◽  
Pressure Synthesis ◽  
Ultrasound Assisted ◽  
Substituted Furans ◽  
Guanidine Moiety

The cycloaddition strategy was employed in order to obtain a 7-oxanorbornene framework substituted with a guanidine moiety or its precursor functional groups: protected amine or thiourea. In order to optimize the conditions for the cycloaddition, several environmentally-friendly methods—microwave assisted organic synthesis, high pressure synthesis, high speed vibrational milling, and ultrasound assisted synthesis—were employed. The outcomes of the cycloaddition reactions were interpreted in terms of endo/exo selectivity, the conversion of the reactants to the product, and the isolated yields. In general, our results indicated the HP and HSVM approaches as the methods of choice to give good yields and conversions.

Roles of vanes in diffuser on stability of centrifugal compressor

2019 ◽  
Vol 233 (14) ◽  
pp. 5380-5392
Author(s):  
Wangzhi Zou ◽  
Xiao He ◽  
Wenchao Zhang ◽  
Zitian Niu ◽  
Xinqian Zheng
Keyword(s):  
High Pressure ◽  
Centrifugal Compressor ◽  
Dynamic Pressure ◽  
Pressure Ratio ◽  
Pressure Rise ◽  
Rotating Stall ◽  
Centrifugal Compressors ◽  
Compression System ◽  
The Stability ◽  
Rotating Instability

The stability considerations of centrifugal compressors become increasingly severe with the high pressure ratios, especially in aero-engines. Diffuser is the major subcomponent of centrifugal compressor, and its performance greatly influences the stability of compressor. This paper experimentally investigates the roles of vanes in diffuser on component instability and compression system instability. High pressure ratio centrifugal compressors with and without vanes in diffuser are tested and analyzed. Rig tests are carried out to obtain the compressor performance map. Dynamic pressure measurements and relevant Fourier analysis are performed to identify complex instability phenomena in the time domain and frequency domain, including rotating instability, stall, and surge. For component instability, vanes in diffuser are capable of suppressing the emergence of rotating stall in the diffuser at full speeds, but barely affect the characteristics of rotating instability in the impeller at low and middle speeds. For compression system instability, it is shown that the use of vanes in diffuser can effectively postpone the occurrence of compression system surge at full speeds. According to the experimental results and the one-dimensional flow theory, vanes in diffuser turn the diffuser pressure rise slope more negative and thus improve the stability of compressor stage, which means lower surge mass flow rate.

The Role of Porous Media in Homogenization of High Pressure Diesel Fuel Spray Combustion

2013 ◽  
Vol 136 (1) ◽  
Author(s):  
Navid Shahangian ◽  
Damon Honnery ◽  
Jamil Ghojel
Keyword(s):  
High Pressure ◽  
Porous Media ◽  
High Speed ◽  
Fuel Spray ◽  
Compression Ignition Engines ◽  
System Pressure ◽  
Novel Approach ◽  
Air Mixing ◽  
The Media

Interest is growing in the benefits of homogeneous charge compression ignition engines. In this paper, we investigate a novel approach to the development of a homogenous charge-like environment through the use of porous media. The primary purpose of the media is to enhance the spread as well as the evaporation process of the high pressure fuel spray to achieve charge homogenization. In this paper, we show through high speed visualizations of both cold and hot spray events, how porous media interactions can give rise to greater fuel air mixing and what role system pressure and temperature plays in further enhancing this process.

Sign in / Sign up

Export Citation Format

Share Document