scholarly journals Electrospinning Preparation and Photocatalytic Activity of Porous TiO2Nanofibers

2012 ◽  
Vol 2012 ◽  
pp. 1-5 ◽  
Author(s):  
Shanhu Liu ◽  
Baoshun Liu ◽  
Kazuya Nakata ◽  
Tsuyoshi Ochiai ◽  
Taketoshi Murakami ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Uv Light ◽  
Ethanol Solution ◽  
Titanium Tetraisopropoxide ◽  
X Ray Diffraction ◽  
Carbon Nanospheres ◽  
Transmission Electron ◽  
Electrospinning Method ◽  
Subsequent Calcination

Porous TiO2nanofibers were prepared via a facile electrospinning method. The carbon nanospheres were mixed with the ethanol solution containing both poly(vinylpyrrolidone) and titanium tetraisopropoxide for electrospinning; and subsequent calcination of as-spun nanofibers led to thermal decomposition of carbon nanospheres, leaving behind pores in the TiO2nanofibers. The morphology and phase structure of the products were investigated with scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray diffraction (XRD). Furthermore, the photocatalytic activity of porous TiO2nanofibers was evaluated by photodecomposition of methylene blue under UV light. Results showed that the porous TiO2nanofibers have higher surface area and enhanced photocatalysis activity, compared to nonporous TiO2nanofibers.

scholarly journals Oxide-Clay Mineral as Photoactive Material for Dye Discoloration

Minerals ◽  
2020 ◽  
Vol 10 (2) ◽  
pp. 132
Author(s):  
Maicon O. Miranda ◽  
Bartolomeu Cruz Viana ◽  
Luzia Maria Honório ◽  
Pollyana Trigueiro ◽  
Maria Gardênnia Fonseca ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Clay Mineral ◽  
Uv Light ◽  
High Photocatalytic Activity ◽  
X Ray Diffraction ◽  
Sem Images ◽  
Zirconium Oxides ◽  
Transmission Electron ◽  
Palygorskite Clay

Titanium and zirconium oxides (TiO2 and ZrO2, respectively) were obtained from alkoxides hydrolyses, and then deposited into palygorskite clay mineral (Pal) to obtain new materials for photocatalytic applications. The obtained materials were characterized by structural, morphological, and textural techniques. X-ray diffraction (XRD) results confirmed the characteristic peaks of oxides and clay transmission electron microscopy (TEM) and scanning electron microscopy (SEM) images of the modified palygorskite with both oxides showed that the clay was successfully modified by the proposed method. The increase in the specific surface area of the clay occurred when TiO2 and ZrO2 were deposited on the surface. The photocatalytic activity of these materials was investigated using the Remazol Blue anion dye under UV light. The evaluated systems presented high photocatalytic activity, reaching approximately 98% of dye discoloration under light. Thus, TiO2–Pal and ZrO2–TiO2–Pal are promising clay mineral-based photocatalysts.

Hydrothermal Synthesis and Photocatalytic Properties of Flower-Like CdS Nanostructures

2011 ◽  
Vol 335-336 ◽  
pp. 460-463 ◽  
Author(s):  
Hong Mei Wang ◽  
Da Peng Zhou ◽  
Yuan Lian ◽  
Ming Pang ◽  
Dan Liu
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Photoelectron Spectroscopy ◽  
Uv Light ◽  
Sulfur Source ◽  
X Ray Diffraction ◽  
Facile Hydrothermal Method ◽  
X Ray ◽  
Transmission Electron ◽  
Cds Nanostructures

Hexagonal flower-like CdS nanostructures were successfully synthesized through a facile hydrothermal method with thiourea as sulfur source. By combining the results of X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), the structural and morphological characterizations of the products were performed. The photocatalytic activity of CdS nanostructures had been tested by degradation of Rhodamine B (RB) under UV light compared to commercial CdS powders, which indicated that the as-syntherized CdS nanostructures exhibited enhanced photocatalytic activity for degradation of RB. The possible growth mechanism of CdS nanostructures was proposed in the end.

Preparation of Ultrafine TiO2 Nanofibers and their Application in Removal of NOx in Air

2008 ◽  
Vol 569 ◽  
pp. 25-28 ◽  
Author(s):  
Kannikar Juengsuwattananon ◽  
Pim On Rujitanaroj ◽  
Pitt Supaphol ◽  
Nuttaporn Pimpha ◽  
Sadao Matsuzawa
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Average Diameter ◽  
Ethanol Solution ◽  
Catalyst Loading ◽  
X Ray Diffraction ◽  
Electrospinning Technique ◽  
Tio2 Nanofiber ◽  
Transmission Electron ◽  
Titania Precursor

Titanium dioxide nanofibers were fabricated by electrospinning technique. The titania solutions were obtained from adding various types of Ti precursor (Ti(OBu)4, Ti(OiPr)4, and Ti(OPr)4) to an ethanol solution containing polyvinyl pyrrolidone (PVP). Acetic acid was used to stabilize the solution and to control the hydrolysis reaction. The porous and well-defined crystalline structure was obtained after calcined at 450oC for 1 h. The thermal behavior, phase composition including crystallite size, as well as the morphology of as-synthesized nanofibers was obtained from thermogravimetric analysis (TGA), X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM), respectively. The average diameter of these nanofibers was in the range from 100 to 400 nm depending on titania precursor. The photocatalytic activity of TiO2 fibers were evaluated for NOx degradation in a gaseous phase. The results demonstrated that at the same catalyst loading, the photocatalytic activity of TiO2 nanofiber was higher than the commercial Degussa P-25.

Few-Layered MoS2 Nanostructures for Highly Efficient Visible Light Photocatalysis

NANO ◽  
2016 ◽  
Vol 11 (10) ◽  
pp. 1650114 ◽  
Author(s):  
Dan Li ◽  
Jianwei Li ◽  
Caiqin Han ◽  
Xinsheng Zhao ◽  
Haipeng Chu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Visible Light ◽  
Electrochemical Impedance ◽  
X Ray Diffraction ◽  
Electron Hole ◽  
Electrochemical Impedance Spectra ◽  
X Ray ◽  
Transmission Electron ◽  
Electron Hole Pair

Few-layered MoS2 nanostructures were successfully synthesized by a simple hydrothermal method without the addition of any catalysts or surfactants. Their morphology, structure and photocatalytic activity were characterized by X-ray diffraction, scanning electron microscopy, energy dispersive X-ray spectroscopy, transmission electron microscopy, electrochemical impedance spectra and UV-Vis absorption spectroscopy, respectively. These results show that the MoS2 nanostructures synthesized at 180[Formula: see text]C exhibit an optimal visible light photocatalytic activity (99%) in the degradation of Rhodamine B owing to the relatively easier adsorption of pollutants, higher visible light absorption and lower electron–hole pair recombination.

Synthesis of La2NiO4+δ Nanofibers by Electrospinning Method and their Application

2018 ◽  
Vol 281 ◽  
pp. 859-864
Author(s):  
Yan Xing ◽  
Meng Fei Zhang ◽  
Tian Jun Li ◽  
Wei Pan
Keyword(s):  
Electron Microscopy ◽  
Solid Oxide Fuel Cells ◽  
Solid Oxide ◽  
Thermal Treatments ◽  
X Ray Diffraction ◽  
Mixed Conductivity ◽  
X Ray ◽  
Transmission Electron ◽  
Structure Morphology ◽  
Electrospinning Method

La2NiO4+σ nanofibers exhibiting typical Ruddlesden–Popper structure (K2NiO4) were fabricated by a facile electrospinning method. X-ray diffraction, scanning electron microscopy and transmission electron microscopy were used to analyze the structure, morphology and crystal process of the La2NiO4+σ nanofibers. For electrical properties measurement, uniaxially aligned nanofibers were directly collected and assembled into electrode. In our research, La2NiO4+σ phase forms above 873K with no impurity phase emerges during the thermal treatments. The nanofibers are smooth and uniform throughout the entire length and the grain is growing as calcination temperature increases. Furthmore, the La2NiO4+σ nanofibers own high mixed conductivity at 773K, laying good foundation for intermediate temperature solid oxide fuel cells application.

Fabrication of Microcrystalline Cellulose/CdS Nanocomposites and their Photocatalytic Properties

2013 ◽  
Vol 634-638 ◽  
pp. 2475-2480
Author(s):  
Ai Min Tang ◽  
Ting Ting Hu ◽  
Xia Su
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Microcrystalline Cellulose ◽  
Uv Light ◽  
Absorption Spectrometry ◽  
Cds Nanoparticles ◽  
Ultrasound Wave ◽  
Transmission Electron ◽  
Initial Ph ◽  
Cds Nanocomposites

Microcrystalline cellulose (MCC)/cadmium sulfide (CdS) nanocomposites were prepared by using ultrasound wave irradiation. The as-prepared samples were characterized using scanning electron microscopy with energy dispersive spectroscopy (SEM-EDS), atomic absorption spectrometry (AAS), transmission electron microscopy (TEM). The photocatalytic behavior of MCC/CdS nanocomposites was evaluated using the degradation of a methyl orange (MeO) aqueous solution under ultraviolet (UV) light irradiation. Results showed that CdS nanoparticles were evenly distributed on the surface of MCC with little aggregation; the amount of Cd attached to the MCC was 23.75 % (w/w, Cd/composites). The MeO degradation rate was much higher when the MCC/CdS nanocomposites were irradiated with UV light than when CdS powder alone was irradiated. In dark conditions, the MCC/CdS nanocomposites showed almost no photocatalytic activity. In addition, the amount of MCC/CdS nanocomposites added to MeO solution and the initial pH of the MeO solution were also important factors influencing the photocatalytic activity. The results show that MCC/CdS nanocomposites are promising materials with excellent performance in photocatalytic applications.

scholarly journals Hydrothermal synthesis of ZnO quantum dot/KNb3O8 nanosheet photocatalysts for reducing carbon dioxide to methanol

2017 ◽  
Vol 8 ◽  
pp. 2264-2270 ◽  
Author(s):  
Xiao Shao ◽  
Weiyue Xin ◽  
Xiaohong Yin
Keyword(s):  
Electron Microscopy ◽  
Quantum Dots ◽  
Uv Light ◽  
Formation Rate ◽  
X Ray Diffraction ◽  
Methanol Production ◽  
X Ray ◽  
Transmission Electron ◽  
Methanol Formation ◽  
Zno Quantum Dots

ZnO quantum dots and KNb3O8 nanosheets were synthesized by a two-step hydrothermal method for the photocatalytic reduction of CO2 to methanol where isopropanol is simultaneously oxidized to acetone . The as-prepared photocatalysts were characterized by X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDS), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM) and UV–vis absorption spectroscopy (UV–vis). The photocatalytic activity of the materials was evaluated by formation rate of methanol under UV light irradiation at ambient temperature and pressure. The methanol formation rate of pure KNb3O8 nanosheets was found to be 1257.21 μmol/g/h, and after deposition of 2 wt % ZnO quantum dots on the surface of KNb3O8 nanosheets, the methanol production rate was found to increase to 1539.77 μmol/g/h. Thus, the ZnO quantum dots obviously prompted separation of charge carriers, which was explained by a proposed mechanism for this photocatalytic reaction.

Preparation of Cellulose Acetate Ultra-Fine Fibers Containing Quasi-Spherical Gold Nanoparticles by Electrospinning Method

2011 ◽  
Vol 391-392 ◽  
pp. 400-403
Author(s):  
Dong Mei Zhao ◽  
Li Guo Sun ◽  
Li Li Lv ◽  
Jian Li
Keyword(s):  
Electron Microscopy ◽  
Gold Nanoparticles ◽  
Cellulose Acetate ◽  
Trisodium Citrate ◽  
X Ray Diffraction ◽  
Au Nps ◽  
Transmission Electron ◽  
Electrospinning Method ◽  
Before And After ◽  
Spherical Gold Nanoparticles

Quasi-spherical gold nanoparticles(Au NPs) prepared by trisodium citrate reduction of HAuCl4were dispersed into cellulose acetate(CA) ultra-fine fibers by electrospinning. The optical properties of Au NPs before and after electrospinning were measured by UV-vis spectrometer. The morphology and distribution of Au NPs in CA ultra-fine fibers were observed by transmission electron microscopy (TEM). The morphology and diameter of Au NPs/CA fibers were studied by scanning electron microscopy (SEM). The crystallinity change of CA fiber before and after adding Au NPs was characterized by X-ray diffraction (XRD).

Solvothermal Synthesis of Novel 3D Peony-Like TiO2 Microstructures and its Enhanced Photocatalytic Activity

NANO ◽  
2018 ◽  
Vol 13 (05) ◽  
pp. 1850056 ◽  
Author(s):  
Yugan He ◽  
Qi Yan ◽  
Xiaoyu Chang ◽  
Meiying Zhu ◽  
Weiwei Wang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Reaction Time ◽  
Uv Light ◽  
X Ray Diffraction ◽  
Reaction Parameters ◽  
X Ray ◽  
Uv Light Irradiation ◽  
Transmission Electron ◽  
Irradiation Power ◽  
Degussa P25

A TiO2 photocatalyst with peony-like microstructures and a large percentage of exposed {001} facets was synthesized using a facile solvethermal method. The peony-like TiO2 was obtained using HF as a capping agent, TiCl4 as the precursor and ethanol as the solvothermal agent. The parameters which influence the mophology and formation mechanism of the products including the HF concentration, the reaction time and temperature and the solvothermal solvent, were investigated. The samples were characterized using field emission scanning electron microscopy, transmission electron microscopy, X-ray diffraction and N2 adsorption and desorption analysis. As the reaction time or reaction temperature increased, the morphology TiO2 changed from hexagonally assembled microspheres to peony-like microflowers which were composed of stacks of ultrathin nanosheets. The other reaction parameters also play a crucial role in the formation of the TiO2 microstuctures. Photocatalytic experiments showed that the synthesized TiO2 outperformed Degussa P25 in the photodegradation of methelene blue under a very weak UV light irradiation (power: 8[Formula: see text]W, light intensity: 0.4[Formula: see text]mW[Formula: see text]cm[Formula: see text]).

Methanol Sensing Properties of Electrospun SnO2 -ZnO Nanofibers

2011 ◽  
Vol 356-360 ◽  
pp. 565-568
Author(s):  
Shao Hong Wei ◽  
Mei Hua Zhou ◽  
Wei Ping Du
Keyword(s):  
Electron Microscopy ◽  
X Ray Diffraction ◽  
Promoting Effect ◽  
Heterojunction Structure ◽  
X Ray ◽  
Sensing Properties ◽  
Transmission Electron ◽  
Electrospinning Method ◽  
Zno Nanofibers ◽  
Scanning Electron

Pure ZnO and SnO2-ZnO nanofibers were synthesized by electrospinning method and characterized via X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The structure and methanol sensing properties of these fibers were investigated. The results indicate that the 20 wt% SnO2-ZnO sensor exhibits considerable sensitivity, rapid response, and good selectivity against methanol at 200 °C due to the special 1D fibers properties and the promoting effect of SnO2/ZnO heterojunction structure. The methanol sensing mechanism of SnO2-ZnO nanofibers were also discussed.

Sign in / Sign up

Export Citation Format

Share Document