scholarly journals Impact of Preparative pH on the Morphology and Photocatalytic Activity of BiVO4

2012 ◽  
Vol 2012 ◽  
pp. 1-7 ◽  
Author(s):  
Yongbiao Wan ◽  
Sihong Wang ◽  
Wenhao Luo ◽  
Lianhua Zhao
Keyword(s):  
Photocatalytic Activity ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
Ammonia Solution ◽  
Synthesis Process ◽  
X Ray Diffraction ◽  
X Ray ◽  
Blue Solution ◽  
Absorption Performance ◽  
The Impact

Adjusting pH with an ammonia solution during the synthesis, single-crystalline BiVO4has been prepared using Bi(NO3)3·5H2O and NH4VO3as starting materials through aqueous-phase precipitation at room temperature. The prepared samples are characterized by X-ray diffraction (XRD), diffuse reflectance spectroscopy (DRS), X-ray photoelectron spectroscopy (XPS), and scanning electron microscope (SEM). The impact of pH on structure, surface morphology, visible-light photocatalytic activity, and light absorption performance of BiVO4is explored and discussed. During the synthesis process, neither extremely acidic (low pH) nor basic (high pH) conditions are desirable for the formation of BiVO4in monoclinic phase. The highest photocatalytic performance on the degradation of a methylene blue solution is observed under pH=7.0for BiVO4in monoclinic scheelite, which is attributed to its small grain size and marked surface oxygen evolution ability.

Preparation of Visible-Light-Responsive TiO2-xNx Photocatalyst by a Very Simple Method

2011 ◽  
Vol 383-390 ◽  
pp. 3188-3191
Author(s):  
Han Jie Huang ◽  
Wen Long She ◽  
Ling Wen Yang ◽  
Hai Peng Huang
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflection ◽  
Ammonia Solution ◽  
Reflection Spectra ◽  
X Ray Diffraction ◽  
Simple Method ◽  
X Ray ◽  
Light Excitation

A visible-light-responsive TiO2-xNx photocatalyst was prepared by a very simple method. Ammonia solution was used as nitrogen resource in this paper. The TiO2-xNx photocatalyst was characterized by X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), UV-Vis diffuse reflection spectra (DRS), and X-ray photoelectron spectroscopy (XPS). The ethylene was selected as a target pollutant under visible light excitation to evaluate the activity of this photocatalyst. The new prepared TiO2-xNx photocatalyst with strong photocatalytic activity under visible light irradiation was demonstrated in the experiment.

scholarly journals Hydrothermal Synthesis of Iodine-Doped Nanoplates with Enhanced Visible and Ultraviolet-Induced Photocatalytic Activities

2012 ◽  
Vol 2012 ◽  
pp. 1-12 ◽  
Author(s):  
Jiang Zhang ◽  
Zheng-Hong Huang ◽  
Yong Xu ◽  
Feiyu Kang
Keyword(s):  
Photocatalytic Activity ◽  
Photoelectron Spectroscopy ◽  
Oxygen Vacancies ◽  
Diffuse Reflectance Spectroscopy ◽  
Synergetic Effect ◽  
X Ray Diffraction ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Photocatalytic Activities

The iodine-doped Bi2WO6(I-BWO) photocatalyst was prepared via a hydrothermal method using potassium iodide as the source of iodine. The samples were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscopy (TEM) and selected area electron diffraction (SAED), X-ray photoelectron spectroscopy (XPS), UV-vis diffuse reflectance spectroscopy (DRS), and photoluminescence (PL) spectroscopy. The photocatalytic activity of I-BWO for the degradation of rhodamine B (RhB) was higher than that of pure BWO and I2-BWO regardless of visible light (>420 nm) or ultraviolet light (<400 nm) irradiation. The results of DRS analysis showed that the I-BWO and I2-BWO catalysts had narrower band gaps. XPS analysis proved that the multivalent iodine species including I0and were coadsorbed on the defect surface of Bi2WO6in I-BWO. The enhanced PL intensity revealed that a large number of defects of oxygen vacancies were formed by the doping of iodine. The enhanced photocatalytic activity of I-BWO for degradation of RhB was caused by the synergetic effect of a small crystalline size, a narrow band gap, and plenty of oxygen vacancies.

scholarly journals Improved Visible Light Photocatalytic Activity for TiO2Nanomaterials by Codoping with Zinc and Sulfur

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Qianzhi Xu ◽  
Xiuying Wang ◽  
Xiaoli Dong ◽  
Chun Ma ◽  
Xiufang Zhang ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
Sunlight Irradiation ◽  
X Ray ◽  
Transmission Electron ◽  
Photoinduced Charge

S/Zn codoped TiO2nanomaterials were synthesized by a sol-gel method. X-ray diffraction, UV-vis diffuse reflectance spectroscopy, transmission electron microscopy, photoluminescence spectroscopy, and X-ray photoelectron spectroscopy were used to characterize the morphology, structure, and optical properties of the prepared samples. The introduction of Zn and S resulted in significant red shift of absorption edge for TiO2-based nanomaterials. The photocatalytic activity was evaluated by degrading reactive brilliant red X-3B solution under simulated sunlight irradiation. The results showed S/Zn codoped TiO2exhibited higher photocatalytic activity than pure TiO2and commercial P25, due to the photosynergistic effect of obvious visible light absorption, efficient separation of photoinduced charge carriers, and large surface area. Moreover, the content of Zn and S in the composites played important roles in photocatalytic activity of TiO2-based nanomaterials.

Dye-Sensitized-Assisted, Enhanced Photocatalytic Activity of TiO2/Bi4V2O11

NANO ◽  
2018 ◽  
Vol 13 (03) ◽  
pp. 1850028 ◽  
Author(s):  
Mengjun Liang ◽  
Zhiyuan Yang ◽  
Ying Mei ◽  
Haoran Zhou ◽  
Shuijin Yang
Keyword(s):  
Photocatalytic Activity ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Dye Sensitized ◽  
Transmission Electron ◽  
Efficient Charge ◽  
Degradation Activity ◽  
Adsorption Desorption

In this study, the TiO2/Bi4V2O[Formula: see text] nanocomposite photocatalysts were prepared by loading different amount of TiO2 nanoparticles onto the surface of Bi4V2O[Formula: see text] nanospheres via a facile hydrothermal method. Afterwards, the as-synthesized samples were characterized by high-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), N2 adsorption–desorption isotherms, X-ray photoelectron spectroscopy (XPS), UV-Vis diffuse reflectance spectroscopy (DRS) and photocurrent techniques. The optimal TiO2/Bi4V2O[Formula: see text] composite with 20[Formula: see text]wt.% TiO2 loading (TB2) exhibited the best photocatalytic activity, which could degrade almost RhB completely within 30[Formula: see text]min under visible light irradiation. The enhanced photocatalytic activity of TiO2/Bi4V2O[Formula: see text] composites for RhB degradation could be mainly ascribed to the efficient charge separation over dye-induced sensitized and the increased specific surface area. Also, the photocatalytic activities of TiO2/Bi4V2O[Formula: see text] for CIP degradation were tested. After five consecutive recycling experiments, the photocatalytic degradation activity of TB2 could still reach 99% which indicated that the catalysts had superior stability. Based on the experimental and bandgap calculations, a possible photocatalytic mechanism of TiO2/Bi4V2O[Formula: see text] for RhB degradation was proposed.

scholarly journals A Facile Synthesis of Graphene-WO3Nanowire Clusters with High Photocatalytic Activity for O2Evolution

2014 ◽  
Vol 2014 ◽  
pp. 1-6
Author(s):  
M.-J. Zhou ◽  
N. Zhang ◽  
Z. H. Hou
Keyword(s):  
Photocatalytic Activity ◽  
Water Splitting ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
High Photocatalytic Activity ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Charge Transfer Rate ◽  
Ft Ir

In the present work, graphene-WO3nanowire clusters were synthesizedviaa facile hydrothermal method. The obtained graphene-WO3nanowire clusters were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy, and ultraviolet-visible diffuse reflectance spectroscopy (DRS) techniques. The photocatalytic oxygen (O2) evolution properties of the as-synthesized samples were investigated by measuring the amount of evolved O2from water splitting. The graphene-WO3nanowire clusters exhibited enhanced performance compared to pure WO3nanowire clusters for O2evolution. The amount of evolved O2from water splitting after 8 h for the graphene-WO3nanowire clusters isca.0.345 mmol/L, which is more than 1.9 times as much as that of the pure WO3nanowire clusters (ca.0.175 mmol/L). The high photocatalytic activity of the graphene-WO3nanowire clusters was attributed to a high charge transfer rate in the presence of graphene.

scholarly journals Synthesis, Characterization, and Photocatalytic Activity of Microspheres Functionalized with Porphyrin

2012 ◽  
Vol 2012 ◽  
pp. 1-10 ◽  
Author(s):  
Jin-Hua Cai ◽  
Jin-Wang Huang ◽  
Han-Cheng Yu ◽  
Liang-Nian Ji
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance ◽  
Diffuse Reflectance Spectroscopy ◽  
Reflectance Spectroscopy ◽  
Model Reaction ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ft Ir

In order to utilize visible light more efficiently in the photocatalytic reaction, microspheres sensitized by 5-(4-allyloxy)phenyl-10,15,20-tri(4-methylphenyl)porphyrin (APTMPP) were prepared and characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), nitrogen physisorption, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR) and UV-vis diffuse reflectance spectroscopy, and so forth, The characterization results indicated that APTMPP-MPS- was composed of the anatase crystal phase. The morphology of the composite materials was spheriform with size of 0.3–0.7 μm and the porphyrin was chemisorbed on the surface of through a Si–O–Ti bond. The photooxidation ofα-terpinene was employed as the model reaction to evaluate the photocatalytic activity of APTMPP-MPS- microspheres under visible light. The results indicated that the photodegradation ofα-terpinene was significantly enhanced in the presence of the APTMPP-MPS- compared with the nonmodified under visible light.

Fabrication and Photocatalytic Performance of Ag/ZnO

2011 ◽  
Vol 396-398 ◽  
pp. 854-857 ◽  
Author(s):  
Zheng Hua Xiao ◽  
Jun Bo Zhong ◽  
Jian Zhang Li ◽  
Wei Hu
Keyword(s):  
Photocatalytic Activity ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance ◽  
Photocatalytic Performance ◽  
Diffuse Reflectance Spectroscopy ◽  
Methyl Orange Solution ◽  
Reflectance Spectroscopy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Orange Solution

It has been found that the photocatalytic activity of ZnO toward the decolorization of Methyl Orange solution can be greatly improved by loading Ag on the surface of ZnO using a photodeposition method. The photocatalysts were characterized by X-ray diffraction(XRD), UV-Vis diffuse reflectance spectroscopy and X-ray photoelectron spectroscopy(XPS), respectively. 0.5%Ag/ZnO demonstrates 2.13 times the photocatalytic activity of pure ZnO.

scholarly journals Enhanced Photocatalytic Activity of CuWO4 Doped TiO2 Photocatalyst Towards Carbamazepine Removal under UV Irradiation

Separations ◽  
2021 ◽  
Vol 8 (3) ◽  
pp. 25
Author(s):  
Chukwuka Bethel Anucha ◽  
Ilknur Altin ◽  
Emin Bacaksız ◽  
Tayfur Kucukomeroglu ◽  
Masho Hilawie Belay ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
Sol Gel ◽  
Pure Tio2 ◽  
Component Part ◽  
Energy Yield ◽  
Mechanical Agitation ◽  
X Ray

Abatement of contaminants of emerging concerns (CECs) in water sources has been widely studied employing TiO2 based heterogeneous photocatalysis. However, low quantum energy yield among other limitations of titania has led to its modification with other semiconductor materials for improved photocatalytic activity. In this work, a 0.05 wt.% CuWO4 over TiO2 was prepared as a powder composite. Each component part synthesized via the sol-gel method for TiO2, and CuWO4 by co-precipitation assisted hydrothermal method from precursor salts, underwent gentle mechanical agitation. Homogenization of the nanopowder precursors was performed by zirconia ball milling for 2 h. The final material was obtained after annealing at 500 °C for 3.5 h. Structural and morphological characterization of the synthesized material has been achieved employing X-ray diffraction (XRD), Fourier transform infra-red (FTIR) spectroscopy, Brunauer–Emmett–Teller (BET) N2 adsorption–desorption analysis, Scanning electron microscopy-coupled Energy dispersive X-ray spectroscopy (SEM-EDS), Transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and UV-Vis diffuse reflectance spectroscopy (UV-vis DRS) for optical characterization. The 0.05 wt.% CuWO4-TiO2 catalyst was investigated for its photocatalytic activity over carbamazepine (CBZ), achieving a degradation of almost 100% after 2 h irradiation. A comparison with pure TiO2 prepared under those same conditions was made. The effect of pH, chemical scavengers, H2O2 as well as contaminant ion effects (anions, cations), and humic acid (HA) was investigated, and their related influences on the photocatalyst efficiency towards CBZ degradation highlighted accordingly.

scholarly journals Study of the Effect of TiO2 Layer on the Adsorption and Photocatalytic Activity of TiO2-MoS2 Heterostructures under Visible-Infrared Light

2020 ◽  
Vol 2020 ◽  
pp. 1-9 ◽  
Author(s):  
N. Cruz-González ◽  
O. Calzadilla ◽  
J. Roque ◽  
F. Chalé-Lara ◽  
J. K. Olarte ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
Nitrogen Adsorption ◽  
High Photocatalytic Activity ◽  
Infrared Light ◽  
Polluted Water ◽  
Light Spectrum ◽  
X Ray

In the last decade, the urgent need to environmental protection has promoted the development of new materials with potential applications to remediate air and polluted water. In this work, the effect of the TiO2 thin layer over MoS2 material in photocatalytic activity is reported. We prepared different heterostructures, using a combination of electrospinning, solvothermal, and spin-coating techniques. The properties of the samples were analyzed by scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM), X-ray diffraction (XRD), nitrogen adsorption-desorption isotherms, UV-Vis diffuse reflectance spectroscopy (UV-Vis-DRS), and X-ray photoelectron spectroscopy (XPS). The adsorption and photocatalytic activity were evaluated by discoloration of rhodamine B solution. The TiO2-MoS2/TiO2 heterostructure presented three optical absorption edges at 1.3 eV, 2.28 eV, and 3.23 eV. The high adsorption capacity of MoS2 was eliminated with the addition of TiO2 thin film. The samples show high photocatalytic activity in the visible-IR light spectrum.

scholarly journals Study on Synthesis and Photocatalytic Activity of Porous Titania Nanotubes

2016 ◽  
Vol 2016 ◽  
pp. 1-10 ◽  
Author(s):  
Huang Liu ◽  
Yanhua Zhang ◽  
Hongtao Yang ◽  
Wei Xiao ◽  
Lanlan Sun
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Filter Paper ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
Cellulose Nanofibers ◽  
Titania Nanotubes ◽  
Tetrabutyl Titanate ◽  
X Ray ◽  
Porous Titania

Using the common natural cellulose substance (filter paper) and triblock copolymer (Pluronic P123) micelles as dual templates, porous titania nanotubes with enhanced photocatalytic activity have been successfully synthesized through sol-gel methods. Firstly, P123 micelles were adsorbed onto the surfaces of cellulose nanofibers of filter paper, followed by hydrolysis and condensation of tetrabutyl titanate around these micelles to form titania layer. After calcination to remove the organic templates, hierarchical titania nanotubes with pores in the walls were obtained. The sample was characterized by X-ray diffraction pattern (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen adsorption/desorption, Fourier Transform Infrared Spectroscopy (FT-IR), Ultraviolet-Visible Diffuse Reflectance Spectroscopy (UV-Vis DRS), and X-ray photoelectron spectroscopy (XPS). As compared with commercial P25 catalyst, the porous titania nanotubes prepared by this method displayed significantly enhanced photocatalytic activity for degrading methyl orange under UV irradiation. Within 10 minutes, the porous titania nanotubes are able to degrade over 70% of the original MO, while the value for the commercial Degussa P25 is only about 33%.

Sign in / Sign up

Export Citation Format

Share Document