scholarly journals Surface Characterization of Asymmetric Bi-Soft Segment Poly(ester urethane urea) Membranes for Blood-Oxygenation Medical Devices

2012 ◽  
Vol 2012 ◽  
pp. 1-9 ◽  
Author(s):  
Mónica Faria ◽  
Vítor Geraldes ◽  
Maria Norberta de Pinho
Keyword(s):  
Cross Sections ◽  
Surface Characterization ◽  
Soft Segment ◽  
Surface Characteristics ◽  
Contact Angles ◽  
Sem Analysis ◽  
Blood Oxygenation ◽  
Water Contact ◽  
Streaming Potentials ◽  
Zeta Potentials

Asymmetric bi-soft segment poly(ester urethane urea) (PEUU) membranes containing polycaprolactone (PCL) as a second soft segment are synthesized with PCL-diol ranging from 0% to 15% (w/w). Bulk and surface characteristics of the PEUU membranes were investigated by scanning electron microscopy (SEM), static water contact angles, and surface streaming potentials and were correlated to hemocompatibility properties, namely, hemolysis and thrombosis degrees. SEM analysis reveals PEUU membranes with asymmetric cross-sections and top dense surfaces with distinct morphologies. The increase in PCL-diol content yields PEUU membranes with blood-contacting surfaces that are smoother, more hydrophilic, and with higher maximum zeta potentials. The results obtained in this work give no evidence of a correlation between hydrophilicity/zeta potentials and the hemolysis/thrombosis degree of blood-contacting surfaces of the PEUU membranes. In contrast, other hemocompatibility aspects reveal that the more hydrophilic membranes are associated with lower platelet deposition and inhibition of extreme states of platelet activation.

scholarly journals Structural, thermal and surface characterization of thermoplastic polyurethanes based on poly(dimethylsiloxane)

2014 ◽  
Vol 79 (7) ◽  
pp. 843-866 ◽  
Author(s):  
Marija Pergal ◽  
Ivan Stefanovic ◽  
Dejan Godjevac ◽  
Vesna Antic ◽  
Vesna Milacic ◽  
...  
Keyword(s):  
Surface Properties ◽  
Surface Characterization ◽  
Soft Segment ◽  
Hydrophobic Surface ◽  
Sem Analysis ◽  
Degree Of Crystallinity ◽  
Water Contact ◽  
Thermoplastic Polyurethanes ◽  
Melting Temperatures ◽  
Soft Segments

In this study, the synthesis, structure and physical properties of two series of thermoplastic polyurethanes based on hydroxypropyl terminated poly(dimethylsiloxane) (HP-PDMS) or hydroxyethoxy propyl terminated poly(dimethylsiloxane) (EO-PDMS) as a soft segment, and 4,4?-methylenediphenyl diisocyanate and 1,4-butanediol as a hard segment were investigated. Each series is composed of samples prepared with a different soft segment. The polyurethanes were synthesized by two-step polyaddition in solution. The effects of the type and content of PDMS segments on the structure, thermal and surface properties of copolymers were studied by 1H NMR, 13C NMR and two-dimensional NMR (HMBC and ROESY) spectroscopy, GPC, DSC, TGA, WAXS, SEM, water contact angle and water absorption measurements. Thermal properties investigated by DSC indicated that the presence of soft PDMS segments lowers the glass transition and melting temperatures of the hard phase as well as the degree of crystallinity. SEM analysis of copolymers with a lower soft segment content confirmed the presence of spherulite superstructures, which arise from the crystallization of the hard segments. When compared with polyurethanes prepared from HP-PDMS, copolymers synthesized from EO-PDMS with the same content of the soft segments have higher degree of crystallinity, better thermal stability and less hydrophobic surface. Our results show that the synthesized polyurethanes have good thermal and surface properties, which could be further modified by changing the type or content of the soft segments.

Tailoring Surface Hydrophobicity of Commercial Polyimide by Laser-Induced Nanocarbon Texturing

2020 ◽  
Vol 8 (3) ◽  
Author(s):  
Moataz Abdulhafez ◽  
Angela J. McComb ◽  
Mostafa Bedewy
Keyword(s):  
Contact Angle ◽  
Surface Characterization ◽  
Surface Engineering ◽  
Processing Parameters ◽  
Surface Hydrophobicity ◽  
Spot Size ◽  
Contact Angles ◽  
Water Contact ◽  
Wide Range ◽  
Surface Nanostructure

Abstract The growth of laser-induced nanocarbons, referred to here as laser-induced nanocarbon (LINC) for short, directly on polymeric surfaces is a promising route toward surface engineering of commercial polymers. This paper aims to demonstrate how this new approach can enable achieving varied surface properties based on tuning the nanostructured morphology of the formed graphitic material on commercial polyimide (Kapton) films. We elucidate the effects of tuning laser processing parameters on the achieved nanoscale morphology and the resulting surface hydrophobicity or hydrophilicity. Our results show that by varying lasing power, rastering speed, laser spot size, and line-to-line gap sizes, a wide range of water contact angles are possible, i.e., from below 20 deg to above 110 deg. Combining water contact angle measurements from an optical tensiometer with LINC surface characterization using optical microscopy, electron microscopy, and Raman spectroscopy enables building the process–structur–property relationship. Our findings reveal that both the value of contact angle and the anisotropic wetting behavior of LINC on polyimide are dependent on their hierarchical surface nanostructure which ranges from isotropic nanoporous morphology to fibrous morphology. Results also show that increasing gap sizes lead to an increase in contact angles and thus an increase in the hydrophobicity of the surface. Hence, our work highlight the potential of this approach for manufacturing flexible devices with tailored surfaces.

scholarly journals Adhesion to Bile Drain Materials and Physicochemical Surface Properties of Enterococcus faecalis Strains Grown in the Presence of Bile

2002 ◽  
Vol 68 (8) ◽  
pp. 3855-3858 ◽  
Author(s):  
Karola Waar ◽  
Henny C. van der Mei ◽  
Hermie J. M. Harmsen ◽  
John E. Degener ◽  
Henk J. Busscher
Keyword(s):  
Surface Properties ◽  
Enterococcus Faecalis ◽  
Photoelectron Spectroscopy ◽  
Surface Protein ◽  
Lower Surface ◽  
Contact Angles ◽  
Surface Proteins ◽  
Water Contact ◽  
Zeta Potentials ◽  
Aggregation Substance

ABSTRACT The aim of this study is to determine whether growth in the presence of bile influences the surface properties and adhesion to hydrophobic bile drain materials of Enterococcus faecalis strains expressing aggregation substance (Agg) or enterococcal surface protein (Esp), two surface proteins that are associated with infections. After growth in the presence of bile, the strains were generally more hydrophobic by water contact angles and the zeta potentials were more negative than when the strains were grown in the absence of bile. Nitrogen was found in lower surface concentrations upon growth in the presence of bile, whereas higher surface concentrations of oxygen were measured by X-ray photoelectron spectroscopy. Moreover, an up to twofold-higher number of bacteria adhered after growth in bile for E. faecalis not expressing Agg or Esp and E. faecalis with Esp on its surface. E. faecalis expressing Agg did not adhere in higher numbers after growth in bile, possibly because they mainly adhere through positive cooperativity and less through direct interactions with a substratum surface. Since adhesion of bacteria is the first step in biomaterial-centered infection, it can be concluded that growth in bile increases the virulence of E. faecalis.

scholarly journals Environment-Friendly and Two-Component Method for Fabrication of Highly Hydrophobic Wood Using Poly(methylhydrogen)siloxane

Polymers ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 124
Author(s):  
Jie Gao ◽  
Wensheng Lin ◽  
Shumin Lin ◽  
Xinxiang Zhang ◽  
Wenbin Yang ◽  
...  
Keyword(s):  
Cross Sections ◽  
Contact Angles ◽  
Practical Application ◽  
Water Contact ◽  
Water Separation ◽  
Environment Friendly ◽  
Two Component ◽  
Oil Water Separation ◽  
Oil Water ◽  
Highly Hydrophobic

Practical application of wood remains a great challenge because of its highly hydrophilic property. In this work, highly hydrophobic wood was produced using an environment-friendly and two-component package method. Poly(methylhydrogen)siloxane (PMHS) and inhibitor played the key role in the hydrophobicity of wood and the assembly process. The two-component package mechanism was discussed in detail. As a result, the water contact angles of the modified wood surface for the radial and cross sections were 139.5° and 152.9°, respectively, which provided the resultant wood high hydrophobicity and dimensional stability. The two-component package method afforded the wood good anti-fouling property and UV-resistance. In addition, the two-component package method could also be applied in functionalization of filter paper for oil/water separation.

scholarly journals Functional Variation of the Antigen I/II Surface Protein in Streptococcus mutans and Streptococcus intermedius

2002 ◽  
Vol 70 (1) ◽  
pp. 249-256 ◽  
Author(s):  
F. C. Petersen ◽  
S. Assev ◽  
H. C. van der Mei ◽  
H. J. Busscher ◽  
A. A. Scheie
Keyword(s):  
Cell Surface ◽  
Streptococcus Mutans ◽  
Contact Angles ◽  
The Body ◽  
Type I ◽  
Functional Variation ◽  
Water Contact ◽  
Streptococcus Intermedius ◽  
Zeta Potentials ◽  
Isogenic Mutants

ABSTRACT Although Streptococcus intermedius and Streptococcus mutans are regarded as members of the commensal microflora of the body, S. intermedius is often associated with deep-seated purulent infections, whereas S. mutans is frequently associated with dental caries. In this study, we investigated the roles of the S. mutans and S. intermedius antigen I/II proteins in adhesion and modulation of cell surface characteristics. By using isogenic mutants, we show that the antigen I/II in S. mutans, but not in S. intermedius, was involved in adhesion to a salivary film under flowing conditions, as well as in binding to rat collagen type I. Binding to human fibronectin was a common function associated with the S. mutans and S. intermedius antigen I/II. Adhesion of S. mutans or S. intermedius to human collagen types I or IV was negligible. Hydrophobicity, as measured by water contact angles, and zeta potentials were unaltered in the S. intermedius mutant. The S. mutans isogenic mutants, on the other hand, exhibited more positive zeta potentials at physiological pH values than did the wild type. The results indicate common and species-specific roles for the antigen I/II in mediating the attachment of S. mutans and S. intermedius to host components and in determining cell surface properties.

Topography and Wettability of Waterborne Polyurethane Coatings with Varying Amounts of Hard Segments

2013 ◽  
Vol 634-638 ◽  
pp. 3033-3037
Author(s):  
Yu Hong Qi ◽  
Zhan Ping Zhang ◽  
Yan Zhang ◽  
Mei Miao
Keyword(s):  
Laser Scanning ◽  
Hard Segment ◽  
Soft Segment ◽  
Hydrophobic Surface ◽  
Waterborne Polyurethane ◽  
Contact Angles ◽  
Water Contact ◽  
Hard Segment Content ◽  
Fouling Release ◽  
Hard Segments

Topography and wettability plays an important role to fouling release performance of a coating. Surface morphology and water contact angles (WCA) depending on time of three waterborne polyurethane (WPU) coatings were studied by laser scanning microscope and optical contact angle meter. The results show that WPU coatings with low hard segment content are consisted of hard segment domains, soft segment domains and crack-like non-cohesive regions. With increasing hard segment content, nanostructured micro-phase separated topography is easier to forming, and crack-like non-cohesive regions is reduced. A stable hydrophobic surface in the WPU system can be obtained by drying coating at 60C as well as adding hard segment content to improve fouling release performance of the coatings.

Laser-Induced Nanocarbon Formation for Tuning Surface Properties of Commercial Polymers

2020 ◽  
Author(s):  
Moataz Abdulhafez ◽  
Angela J. McComb ◽  
Mostafa Bedewy
Keyword(s):  
Contact Angle ◽  
Surface Properties ◽  
Surface Characterization ◽  
Surface Engineering ◽  
Surface Hydrophobicity ◽  
Contact Angles ◽  
Structure Property ◽  
Water Contact ◽  
Wide Range ◽  
Commercial Polymers

Abstract The growth of laser-induced nanocarbons, referred to here are LINC for short, directly on polymeric surfaces is a promising route toward surface engineering of commercial polymers. This paper aims to demonstrate how this new approach can enable achieving varied surface properties based on tuning the nanostructured morphology of the formed graphitic material on commercial polyimide (Kapton) films. We elucidate the effects of tuning laser processing parameters on the achieved nanoscale morphology and the resulting surface hydrophobicity or hydrophilicity. Our results show that by varying lasing power, rastering speed, laser spot size, and line-to-line gap sizes, a wide range of water contact angles are possible, i.e. from below 20° to above 110°. Combining water contact angle measurements from an optical tensiometer with LINC surface characterization using optical microscopy, electron microscopy, and Raman spectroscopy enables building the process-structure-property relationship. Our findings reveal that both the value of contact angle and the anisotropic wetting behavior of LINC on polyimide are dependent on their hierarchical surface nanostructure which ranges for isotropic nanoporous morphology to fibrous morphology. Results also show that increasing gap sizes lead to an increase in contact angles and thus an increase in the hydrophobicity of the surface. Hence, our work highlight the potential of this approach for manufacturing flexible devices with tailored surfaces.

Superhydrophobic paper coating containing nonconventional clay

TAPPI Journal ◽  
2010 ◽  
Vol 9 (11) ◽  
pp. 33-40 ◽  
Author(s):  
BEHUDIN (BEKO) MESIC ◽  
CHRISTIAN KUGGE ◽  
LARS JÄRNSTRÖM
Keyword(s):  
Water Absorption ◽  
Cross Sections ◽  
Transmission Rate ◽  
High Water ◽  
Contact Angles ◽  
Water Contact ◽  
Barrier Performance ◽  
Superhydrophobic Paper ◽  
Hydrophobic Clay ◽  
Scanning Electron

Hydrophobic clay fillers have not been widely used in dispersion coatings for linerboard because of the difficulty of dispersing them in water. This work investigated whether hydrophobic clay can be used as filler in barrier dispersion coatings. Hydrophobic clay was compared with conventional clay in terms of coating consolidation, structure, wetting, and barrier performance. All coatings were applied to linerboard sheets made using a laboratory dynamic sheet former. The coated linerboards were examined using scanning electron microscopy and Raman spectroscopy, and were characterized with respect to water absorption, vapor transmission rate, and contact angles. The results show that a coating containing hydrophobic clay provides a superhydrophobic character to paper; i.e., a high water contact angle (150°) and relatively low water absorption. Raman mapping of cross-sections revealed that the latex distribution is uniform in the presence of either conventional clay or hydrophobic clay, and that the distribution of hydrophobic clay tends to be more uniform than conventional clay, which might reflect good mixing and consolidation of hydrophobic clay.

scholarly journals Effectiveness of Biofunctionalization of Titanium Surfaces with Phosphonic Acid

Biomedicines ◽  
2021 ◽  
Vol 9 (11) ◽  
pp. 1663
Author(s):  
Ainhoa Aresti ◽  
Javier Aragoneses ◽  
Nansi López-Valverde ◽  
Ana Suárez ◽  
Juan Manuel Aragoneses
Keyword(s):  
Phosphonic Acid ◽  
Test Group ◽  
Surface Characteristics ◽  
Contact Angles ◽  
Sem Analysis ◽  
Surface Wettability ◽  
Cellular Behavior ◽  
Assembled Monolayers ◽  
Vitro Analysis

Surface functionalization of dental implant surfaces has been a developing field in biomaterial research. This study aimed to obtain self-assembled monolayers (SAMs) using carboxyethylphosphonic acid on the surface of titanium (Ti) screws, and assessed the surface characteristics, biomechanical, and cellular behavior on the obtained specimens. This study had three groups, i.e., a control (untreated screws), a test group treated with phosphonic acid, and a third group with treated acid and bone morphogenetic protein (BMP-2) for in vitro analysis of cell lines. The assessed parameters included surface wettability, surface characteristics using scanning electron microscopy (SEM), protein immobilization, and cellular behavior of fibroblasts and mesenchymal stem cells of adipose tissue (MSCat cells). For surface wettability, a Welch test was performed to compare the contact angles between control (67 ± 1.83) and test (18.84 ± 0.72) groups, and a difference was observed in the mean measurements, but was not statistically significant. The SEM analysis showed significant surface roughness on the test screws and the cellular behavior of fibroblasts, and MSCat cells were significantly improved in this group, with fibroblasts having a polygonal shape with numerous vesicles and MSCat cells stable and uniformly coating the test Ti surface. Surface biofunctionalization of Ti surfaces with phosphonic acid showed promising results in this study, but remains to be clinically validated for its applications.

SURFACE CHARACTERIZATION AND HEMOCOMPATIBILITY OF HEPARINIZED 316L STAINLESS STEEL

2008 ◽  
Vol 20 (01) ◽  
pp. 1-8 ◽  
Author(s):  
Tzu-Wen Chuang ◽  
Feng-Huei Lin
Keyword(s):  
Stainless Steel ◽  
Surface Characterization ◽  
316L Stainless Steel ◽  
Sessile Drop ◽  
Contact Angles ◽  
Hexamethylene Diisocyanate ◽  
Water Contact ◽  
Arterial Restenosis ◽  
Conformational Freedom ◽  
Surface Coupling

Poor compatibility between blood and metallic coronary artery stents is one reason for arterial restenosis. Immobilization of heparin on stent's surface is feasible for improving compatibility. We examined possible surface-coupling agents for anticoagulant agent immobilization. Hexamethylene diisocyanate (HMDI) was examined as surface-coupling agent to activate 316L stainless steel (e.g. stent material). Afterwards, we grafted PEG on the HMDI activated surface to provide heparin with higher conformational freedom and a more hydrophilic environment. The effectiveness of HMDI activated and PEG grafted surface was confirmed by FTIR, XPS, and water contact angle test. Heparin was then immobilized onto the activated 316L stainless steel. The heparin surface density was 9.5 μg/cm2. Sessile drop water contact angles showed that the heparingrafted surface is even more hydrophilic than the PEG grafted one. The function of grafted heparin was evaluated by antithrombrin III (ATIII) adsorption testing and SEM. The surface with heparin grafting shows better ATIII binding ability and hemocompatibility than the native one.

Sign in / Sign up

Export Citation Format

Share Document