scholarly journals Development of a Novel Double-Ring Deployable Mesh Antenna

2012 ◽  
Vol 2012 ◽  
pp. 1-10 ◽  
Author(s):  
Yan Xu ◽  
Fuling Guan ◽  
Xian Xu ◽  
Hongjian Wang ◽  
Yao Zheng
Keyword(s):  
Low Frequency ◽  
Design Concept ◽  
Design Parameters ◽  
Accuracy Measurement ◽  
Double Ring ◽  
Reflective Surface ◽  
Final Design ◽  
Geometric Relationship ◽  
Relationship Of ◽  
Adjustment Test

This paper addresses a type of deployable mesh antenna consisting of the double-ring deployable truss edge frame and the cable net reflector. The structural design concept of the deployable antennas is presented. The deployable truss is designed and the geometric relationship of each strut length is formulated. Two types of radial truss elements are described and compared. The joint pattern and the active cables of the final design concept are determined. The pattern of the cable net is the three-orientation grid. Two connection schemes between the reflector and the deployable edge frame are investigated. The design parameters and the shape adjustment mechanism of this cable net are determined. The measurement test technologies of the antennas on the ground including test facilities, deployment test, and measurement and adjustment test are proposed. The antenna patterns are analyzed based on the real surfaces of the reflector obtained by the reflective surface accuracy measurement. The tests and analytic results indicated that the accuracy of the reflective surface is high and is suitable for low-frequency communication.

DIAGNOSING QUALITY OF FRICTION SYSTEMS OF MECHANISMS OF DEVICES

2019 ◽  
Vol 1 (7) ◽  
pp. 10-13
Author(s):  
D. Yu. Ershov ◽  
I. N. Lukyanenko ◽  
E. E. Aman
Keyword(s):  
Surface Defects ◽  
Diagnostic Methods ◽  
Design Parameters ◽  
Diagnostic Model ◽  
Mechanical Assemblies ◽  
Local Defects ◽  
Relationship Of ◽  
The Relationship ◽  
Production And Operation

The article shows the need to develop diagnostic methods for monitoring the quality of lubrication systems, which makes it possible to study the dynamic processes of contacting elements of the friction systems of instrument mechanisms, taking into account roughness parameters, the presence of local surface defects of elements and the bearing capacity of a lubricant. In the present article, a modern diagnostic model has been developed to control the quality of the processes of production and operation of friction systems of instrument assemblies. With the help of the developed model, it becomes possible to establish the relationship of diagnostic and design parameters of the mechanical system, as well as the appearance of possible local defects and lubricant state, which characterize the quality of friction systems used in many mechanical assemblies of the mechanisms of devices. The research results are shown in the form of nomograms to assess the defects of the elements of friction mechanisms of the mechanisms of the devices.

Optimization Analysis of the Wedge Block Surface of NYD Contact Backstop

2013 ◽  
Vol 433-435 ◽  
pp. 2277-2281
Author(s):  
Quan Wei Wang ◽  
Ming Hui Wang ◽  
Dong Li ◽  
Dian Mao Wan ◽  
Rong Meng
Keyword(s):  
Cross Section ◽  
Design Parameters ◽  
Optimization Analysis ◽  
Archimedes Spiral ◽  
The Cross ◽  
Section Curve ◽  
Relationship Of ◽  
The Relationship

By analyzing the relationship of the design parameters of NYD contact backstop, the cross-section curve of the wedge block has been discussed as Archimedes spiral, logarithm spiral and arc. Each curve is designed optimally using MATLAB optimization toolbox. The merits and drawbacks of each curve are discussed.

scholarly journals Dynamic Line Rating—An Effective Method to Increase the Safety of Power Lines

2021 ◽  
Vol 11 (2) ◽  
pp. 492
Author(s):  
Levente Rácz ◽  
Bálint Németh
Keyword(s):  
Expert System ◽  
Electric Field ◽  
High Voltage ◽  
Low Frequency ◽  
Power Line ◽  
Power Lines ◽  
Design Parameters ◽  
Monitoring Methods ◽  
Limit Value ◽  
Potential Applications

Exceeding the electric field’s limit value is not allowed in the vicinity of high-voltage power lines because of both legal and safety aspects. The design parameters of the line must be chosen so that such cases do not occur. However, analysis of several operating power lines in Europe found that the electric field strength in many cases exceeds the legally prescribed limit for the general public. To illustrate this issue and its importance, field measurement and finite element simulation results of the low-frequency electric field are presented for an active 400 kV power line. The purpose of this paper is to offer a new, economical expert system based on dynamic line rating (DLR) that utilizes the potential of real-time power line monitoring methods. The article describes the expert system’s strengths and benefits from both technical and financial points of view, highlighting DLR’s potential for application. With our proposed expert system, it is possible to increase a power line’s safety and security by ensuring that the electric field does not exceed its limit value. In this way, the authors demonstrate that DLR has other potential applications in addition to its capacity-increasing effect in the high voltage grid.

Near-maximal voluntary hyperpnea and ventilatory muscle function

1984 ◽  
Vol 57 (6) ◽  
pp. 1742-1748 ◽  
Author(s):  
T. R. Bai ◽  
B. J. Rabinovitch ◽  
R. L. Pardy
Keyword(s):  
Muscle Function ◽  
Low Frequency ◽  
Normal Subjects ◽  
Pressure Time ◽  
Before And After ◽  
Expiratory Muscles ◽  
Four Levels ◽  
Frequency Relationship ◽  
Low Frequency Power ◽  
Relationship Of

Because of its potential relevance to heavy exercise we studied the ventilatory muscle function of five normal subjects before, during, and after shortterm near-maximal voluntary normocapnic hyperpnea. Measurements of pleural and abdominal pressures and diaphragm electromyogram (EMG) during hyperpnea and of maximum respiratory pressures before and after hyperpnea were made at four levels of ventilation: 76, 79, and 86% maximal voluntary ventilation (MVV) and at MVV. Measurements of pleural and abdominal pressures and diaphragm electromyogram (EMG) during hyperpnea and of maximum respiratory pressures before and after hyperpnea were made. The pressure-stimulation frequency relationship of the diaphragm obtained by unilateral transcutaneous phrenic nerve stimulation was studied in two subjects before and after hyperpnea. Decreases in maximal inspiratory (PImax) and transdiaphragmatic (Pdimax) strength were recorded posthyperpnea at 76 and 79% MVV. Decreases in the pressure-frequency curves of the diaphragm and the ratio of high-to-low frequency power of the diaphragm EMG occurred in association with decreases in Pdimax. Analysis of the pressure-time product (P X dt) for the inspiratory and expiratory muscles individually indicated the increasing contribution of expiratory muscle force to the attainment of higher levels of ventilation. Demonstrable ventilatory muscle fatigue may limit endurance at high levels of ventilation.

scholarly journals Factor relationship of the parameters of the harmonic oscillatory system when cleaning the filtration surface of the plant for vegetable oil regeneration

2020 ◽  
pp. 100-102
Author(s):  
Phelix Yakovlevich Rudik ◽  
Natalya Lvovna Morgunova ◽  
Evgeniy Aleksandrovich Sundukov
Keyword(s):  
Shelf Life ◽  
Vegetable Oil ◽  
Vegetable Oils ◽  
Oscillatory System ◽  
Solid Particles ◽  
Design Parameters ◽  
Small Enterprises ◽  
Relationship Of ◽  
Filtration Surface

When processing oilseeds, technologies are needed to obtain valuable vegetable oils by pressing with a long shelf life. Existing technologies for cleaning vegetable oils in small enterprises do not allow cleaning the oil from all undesirable substances and therefore the oils have a short shelf life, quickly oxidize and lose their presentation. The article theoretically substantiates the design parameters of a directional ultrasonic and mechanical oscillatory system for cleaning the filtration surface of the installation from accumulated solid particles in the oil.

An Approach to Represent Imprecision in Interactive Design Using Fuzzy Set Theory

1992 ◽  
Author(s):  
Numan Iqbal ◽  
Gary L. Kinzel
Keyword(s):  
Set Theory ◽  
Fuzzy Set ◽  
Fuzzy Set Theory ◽  
Ohio State University ◽  
Design Parameters ◽  
State University ◽  
Design Variables ◽  
Final Design ◽  
The Ohio State University ◽  
Number Of Iterations

Abstract Imprecision in the values of design parameters is an inherent character of the analysis stage of engineering design when the ideas have not yet converted to precise values and some of the design parameters remain flexible. The goal of this paper is to illustrate the application of the concepts of fuzzy set theory to represent this imprecision in design after a basic analytical model of the part being evaluated is developed. The idea is to help the designer efficiently study the effect of changing the values of certain parameters so that the number of iterations required to reach a final design can be reduced. The concepts of fuzzy set theory are used to represent design variables and the vertex method is utilized to calculate the fuzzy outputs in an interactive manner through an existing constraint manager (Design Shell) developed at The Ohio State University.

LOFAR4SW – Space Weather Science and Operations with LOFAR

2021 ◽  
Author(s):  
Hanna Rothkaehl ◽  
Barbara Matyjasiak ◽  
Carla Baldovin ◽  
Mario Bisi ◽  
David Barnes ◽  
...  
Keyword(s):  
The Netherlands ◽  
Radio Telescope ◽  
Space Weather ◽  
Low Frequency ◽  
Point Of View ◽  
Current Status ◽  
Civic Society ◽  
Horizon 2020 ◽  
Final Design ◽  
Areas Of Interest

<p>Space Weather (SW) research is a very important topic from the scientific, operational and civic society point of view. Knowledge of interactions in the Sun-Earth system, the physics behind observed SW phenomena, and its direct impact on modern technologies were and will be key areas of interest.  The LOFAR for Space Weather (LOFAR4SW) project aim is to prepare a novel tool which can bring new capabilities into this domain. The project is realised in the frame of a Horizon 2020 INFRADEV call.  The base for the project is the Low Frequency Array (LOFAR) - the worlds largest low frequency radio telescope, with a dense core near Exloo in The Netherlands and many stations distributed both in the Netherlands and Europe wide with baselines up to 2000 km.  The final design of LOFAR4SW will provide a full conceptual and technical description of the LOFAR upgrade, to enable simultaneous operation as a radio telescope for astronomical research as well as an infrastructure working for Space Weather studies.  In this work we present the current status of the project, including examples of the capabilities of LOFAR4SW and the project timeline as we plan for the Critical Design Review later in 2021.</p>

scholarly journals Changes in the role of Pacific decadal oscillation on sea ice extent variability across the mid-1990s

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Hyerim Kim ◽  
Sang-Wook Yeh ◽  
Soon-Il An ◽  
Se-Yong Song
Keyword(s):  
Sea Ice ◽  
Pacific Decadal Oscillation ◽  
Far East ◽  
Low Frequency ◽  
Early Summer ◽  
Sea Ice Extent ◽  
The Pacific ◽  
Before And After ◽  
Relationship Of

Abstract Characteristics of sea ice extent (SIE) have been rapidly changing in the Pacific Arctic sector (PAS) in recent years. The SIE variability in PAS during the late spring and early summer (i.e., April–May–June, AMJ) plays a key role in determining the SIE during the following fall when SIE is at a minimum. We find that the Pacific Decadal Oscillation (PDO), which is the most dominant variability of sea surface temperature (SST) on the low-frequency timescales, differently influences the SIE in PAS during AMJ before and after the mid-1990s. While a positive phase of PDO during the previous winter acts to increases SIE during AMJ before the mid-1990s, it acts to decrease SIE during AMJ after the mid-1990s. Further analysis indicates that atmospheric circulation associated with PDO differently influences the variability of SIE in the PAS during AMJ by modulating poleward moisture transport across the Alaska or the Far East Asia peninsula. This results in the change in the relationship of PDO and SIE in the PAS before and after the mid-1990s.

Analysis of crab size structure and the fishing effort applied to a crab fishery in northwest Mexico

Crustaceana ◽  
2018 ◽  
Vol 91 (2) ◽  
pp. 225-237 ◽  
Author(s):  
César A. Heredia-Delgadillo ◽  
Guillermo Rodríguez-Domínguez ◽  
Raúl Pérez-González ◽  
Nicolás Castañeda-Lomas ◽  
Sergio G. Castillo-Vargasmachuca ◽  
...  
Keyword(s):  
Gulf Of California ◽  
Size Structure ◽  
Coastal Lagoons ◽  
Low Frequency ◽  
Fishing Effort ◽  
Double Ring ◽  
Northwest Mexico ◽  
Fishing Gears ◽  
Fishery Cooperatives ◽  
Ring Net

The fishing effort of a Sinaloa crab fishery in the Gulf of California in 2014 was analysed based on fishermen’s interviews, official catches and permits, and information from a sample of fishing logbooks from five fishery cooperatives operating in four coastal lagoons that contained the daily catch from individual fishing trips. Unauthorized gear, a double-ring net (DR), was used most frequently (>70% of the fishers) for crab fishing, although authorized single-ring nets and Chesapeake traps (CT) were also used with low frequency. The estimated fishing effort was 641 boats/day in the four coastal lagoons, which was 34% more than authorized, and 818 boats/day were employed in all of Sinaloa. A total of 57 479 fishing gears were estimated for the study area, which was 49.9% greater than the maximum authorized number, and 80 822 nominal fishing gears were estimated for the entire Sinaloa crab fishery, 14.15% more than the total gear limit (70 800). The size of the mesh used in the gear was smaller than the authorized limit of 76 mm, and >50% of the catches included crabs of unlawful size. It is argued that the effort must be regulated in terms of the number of vessels, per unit time, and not the number of gears. The information from this study demonstrates a failure to monitor compliance with current regulations and thus means that other strategies for the sustainable management of the fishery, such as co-management, should be tested.

Sign in / Sign up

Export Citation Format

Share Document