scholarly journals Custom Metal Occlusal Surface for Acrylic Resin Denture Teeth to Enhance Wear Resistance: A Case Report

2012 ◽  
Vol 2012 ◽  
pp. 1-4
Author(s):  
Rizwan Ali Shivji ◽  
Vaibhav D. Kamble ◽  
Mohd. Atif Khan
Keyword(s):  
Wear Resistance ◽  
Case Report ◽  
Occlusal Surface ◽  
Treatment Modalities ◽  
Wear Resistant ◽  
Masticatory Efficiency ◽  
Denture Teeth ◽  
Custom Made ◽  
Occlusal Wear ◽  
Enhance Wear Resistance

Wear of the occlusal surface of the denture is a known fact which leads to subsequent changes in jaw relation, vertical dimension, loss of aesthetics, aged looks, and decrease in masticatory efficiency. Treatment modalities includes, change of denture set after a regular interval of 4-5 years, use of wear resistant denture teeth that includes wear resistant resin or porcelain teeth, teeth with cast metal occlusal surface, and altering occlusal contact areas of denture teeth by use of silver amalgam fillings. A case report of a patient who had increased tendency of occlusal wear was treated with custom made metal occlusal surface of denture teeth to enhance wear resistance and to improve the masticatory efficiency.

Toward the Development of AHSS for Wear Resistant Applications

2018 ◽  
Vol 941 ◽  
pp. 568-573 ◽  
Author(s):  
Preston Wolfram ◽  
Christina Hensley ◽  
Ronald Youngblood ◽  
Rachael Stewart ◽  
Emmanuel de Moor ◽  
...  
Keyword(s):  
Wear Resistance ◽  
Retained Austenite ◽  
Process Development ◽  
High Strength ◽  
Advanced High Strength Steel ◽  
Wear Resistant ◽  
Transformation Induced Plasticity ◽  
Enhance Wear Resistance ◽  
Improve Wear Resistance ◽  
Strength And Ductility

Advanced High Strength Steel (AHSS) developments have largely focused on automotive applications using metallurgical approaches to develop retained austenite-containing microstructures in a variety of new steels, using the transformation-induced plasticity (TRIP) effect to achieve better combinations of strength and ductility. These efforts have been extended in recent studies to explore the potential to improve wear resistance, using metastable retained austenite to enhance wear resistance for earth-moving and other applications. This paper provides selected highlights of the authors’ efforts to develop wear resistant steels using AHSS processing approaches. Some attractive product/process development opportunities are identified, and it appears that martensite-austenite microstructures produced using “quenching and partitioning” exhibit increased wear resistance.

scholarly journals Enhancement of wear resistance of mulcher teeth with the help of electrochemical coats

2020 ◽  
Vol 193 ◽  
pp. 01019
Author(s):  
N. M. Belous ◽  
Yu. E. Kisel ◽  
G. V. Guryanov ◽  
L. M. Markaryants
Keyword(s):  
Wear Resistance ◽  
Service Life ◽  
Abrasive Wear ◽  
Adhesive Strength ◽  
Wear Resistant ◽  
Alloying Additives ◽  
Enhance Wear Resistance

Influence of alloying additives in electrolyte and conditions of electrolysis on microhardness, adhesive strength and wear resistance of iron and cobalt coats have been investigated. Conditions of creating coats which make it possible to considerably enhance wear resistance of the mulcher teeth under the conditions of abrasive wear have been established. The process of creating wear resistant coats have been approved and recommended to introduction after the service life of the mulcher teeth sets have been extended.

SWEBOR 400

Alloy Digest ◽  
2014 ◽  
Vol 63 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Tensile Properties ◽  
High Strength Steel ◽  
High Strength ◽  
Bend Strength ◽  
Great Strength ◽  
Wear Resistant

Abstract Swebor 400 (hardness 400 HBW) is a high-strength steel with good wear resistant qualities. This alloy is used to endure conditions of extra-heavy wear and when great strength and good weldability is required. This datasheet provides information on composition, hardness, tensile properties, and bend strength as well as fracture toughness. It also includes information on wear resistance as well as forming, machining, and joining. Filing Code: CS-181. Producer or source: Swebor Stål Svenska AB.

RUUKKI RAEX 300

Alloy Digest ◽  
2012 ◽  
Vol 61 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Shear Strength ◽  
Impact Toughness ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Structural Components ◽  
Wear Resistant

Abstract RUUKKI RAEX 300 (typical yield strength 900 MPa) is part of the Raex family of high-strength and wear-resistant steels with favorable hardness and impact toughness to extend life and decrease wear in structural components. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on wear resistance as well as forming, machining, and joining. Filing Code: SA-643. Producer or source: Rautaruukki Corporation.

XAR 400

Alloy Digest ◽  
2014 ◽  
Vol 63 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Structural Steel ◽  
Tensile Properties ◽  
Heat Treating ◽  
Rolled Plate ◽  
Wear Resistant ◽  
Heavy Plate ◽  
Key Factor

Abstract XAR 400 (No. 1.8714) is a wear-resistant structural steel as heavy plate that is normalized or normalized rolled plate. XAR (extra abrasion resistant) steels are solutions for applications where wear is a key factor. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on wear resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-704. Producer or source: ThyssenKrupp Steel Europe AG.

Improving the efficiency of hardening of tillage machine working bodies by arc surfacing using wear-resistant rollers

2020 ◽  
pp. 176-185
Author(s):  
Dmitriy B. Slinko ◽  
Vyacheslav A. Denisov ◽  
Dmitriy A. Dobrin ◽  
Andrey V. Afanas’yev ◽  
Pavel M. Kislov
Keyword(s):  
Wear Resistance ◽  
Operating Time ◽  
Field Tests ◽  
Electric Arc ◽  
Cutting Edge ◽  
Linear Size ◽  
Research Purpose ◽  
Cored Wire ◽  
Wear Resistant ◽  
Working Bodies

Reducing operating costs during soil processing and increasing the wear resistance of parts and components is an important condition for reducing the cost of agricultural products, increasing its efficiency and competitiveness. The development of materials with increased wear resistance and new effective technologies for strengthening working bodies in their manufacture is now becoming an urgent task. (Research purpose) The research purpose is increasing the wear resistance of the working bodies of soil-processing machines by electric arc surfacing. (Materials and methods) During the experimental study, it has been performed testing of modes and surfacing of a pilot batch of working bodies from Kverneland for field tests in VIM on an automated installation for electric arc surfacing. Authors used eutectic CastolinEnDotec DO*30 powder wire with a diameter of 1.2 millimeters and a boron content of up to 4 percent for surfacing wear-resistant rollers, which allows to obtain wear-resistant rollers with a hardness of up to 65 HRC without pores and cracks. (Results and discussion) It has been revealed that hardened ploughshares that have passed field tests are subject to lower wear rates compared to non-hardened ones. It was found that when operating time is 24.785 hectares per ploughshare, the wear of the linear size of the cutting edge along the width of hardened ploughshares is on average up to 10-11 millimeters less than that of non-hardened ones. It was found that when processing 228 hectares, the wear of the linear size of the cutting edge along the width of hardened bits is on average up to 9-10 millimeters less than that of non-hardened ones. (Conclusions) The technology of surfacing with intermittent wear-resistant rollers provides an increase in the efficiency of hardening of Kverneland working bodies according to the criterion of wear resistance by an average of 20-30 percent. The adjusted technological parameters of the surfacing process will reduce the wear rate and increase the service life of the blade part of the working bodies, as well as reduce the amount of surfaced material by an average of 60 percent. The continuation of work on strengthening the working bodies should be aimed at changing the surfacing scheme and choosing a cheaper domestic cored wire.

Investigating formation, structure and properties of coatings based on Cu–Ti alloys

2019 ◽  
pp. 175-181
Author(s):  
A. I. Kovtunov ◽  
T. V. Semistenova ◽  
A. M. Ostryanko
Keyword(s):  
Wear Resistance ◽  
Heat Resistance ◽  
Chemical Compound ◽  
Wear Resistant Coating ◽  
Titanium Coating ◽  
Structure And Properties ◽  
Properties Of Coatings ◽  
Wear Resistant ◽  
Ti Alloys ◽  
Titanium Wire

The paper offers technology of argon-arc surfacing with titanium wire in order to form heat and wear resistant coating based on the titanium cuprides. The influence of surfacing modes on the chemical compound and structure of formed coatings is determined. The wear resistance and heat resistance at 600°C and 800°C were researched for copper–titanium coating with 8–63% titanium.

Microstructure and Grain Abrasion Properties of Cr3C2-NiCr Coating Prepared by Laser Cladding Method

2012 ◽  
Vol 271-272 ◽  
pp. 3-7
Author(s):  
Long Wei ◽  
Zong De Liu ◽  
Xin Zhi Li ◽  
Ming Ming Yuan ◽  
Cheng Yuan Zhong
Keyword(s):  
Wear Resistance ◽  
Wear Rate ◽  
Laser Cladding ◽  
Micro Hardness ◽  
High Quality ◽  
Wear Resistant ◽  
Hardness Tester ◽  
Technology Analysis ◽  
Main Component

Cr3C2-NiCr has high quality of wear resistant properties and is widely used in abrasive environment. In this paper, Cr3C2-NiCr coating was prepared on 45 steel by laser cladding technology. Analysis and research of the coatings were achieved by SEM and XRD to determine the main component and the different region on coatings. The hardness and the element component were investigated by micro-hardness tester and EDS. Abrasion tests were performed to contrast the wear resistance of two materials. The results indicate that the hardness of the coatings is nearly 3 times as the substrate. The coatings are well combined with the substrate and the phase of Cr3C2 has a large proportion in the coatings. Abrasion tests show that the average of wear rate on substrate is 5.2 times as the coatings.

Analysis of Wear-Resistant Materials of Mixer - Pneumosuperchargers Blades Operating under Conditions of Abrasive Wear

2021 ◽  
Vol 316 ◽  
pp. 893-898
Author(s):  
Natalya Gabelchenko ◽  
Artem Belov ◽  
Artem Kravchenko ◽  
Oleg Kryuchkov
Keyword(s):  
Mechanical Properties ◽  
Weight Loss ◽  
Wear Resistance ◽  
Chemical Composition ◽  
Abrasive Wear ◽  
Abrasive Medium ◽  
Wear Resistant ◽  
Comparative Tests ◽  
Before And After ◽  
110G13l Steel

We conducted comparative tests of the wear resistance of metals operating under abrasive conditions. Samples were cut from the working parts of mixer-pneumosuperchargers. The chemical composition and mechanical properties were determined. To compare samples under abrasive wear conditions, we designed and assembled a carousel installation. The principle of its operation is based on mixing the abrasive medium by the samples being studied with a given speed. Wear resistance was evaluated by weight loss by samples after several test cycles. To determine changes in the structure of the metal during abrasive wear, metallographic studies of the samples were carried out before and after the tests. It is shown that the best complex of service and mechanical properties is possessed by 110G13L steel.

Sign in / Sign up

Export Citation Format

Share Document