scholarly journals Adaptive Noise Reduction of Scintigrams with a Wavelet Transform

2012 ◽  
Vol 2012 ◽  
pp. 1-7 ◽  
Author(s):  
Koichi Ogawa ◽  
Masahiko Sakata ◽  
Yu Li
Keyword(s):  
Wavelet Transform ◽  
Noise Reduction ◽  
Signal To Noise Ratio ◽  
Poisson Noise ◽  
Denoising Method ◽  
Translation Invariant ◽  
Conventional Methods ◽  
Adaptive Noise ◽  
Better Than

The aim of this study was to eliminate the effect of Poisson noise in scintigrams with a wavelet thresholding method. We developed a new noise reduction method with a wavelet transform. The proposed method was a combination of the translation-invariant denoising method and our newly introduced denoising filter which was applicable for Poisson noise. To evaluate the validity of our proposed method, phantom images and scintigrams were used. The results with the phantom images showed that our method was better than conventional methods in terms of the peak signal-to-noise ratio by 3 dB. Quality of the scintigrams processed with our method was better than that with the conventional methods in terms of reducing Poisson noise while preserving edge components. The results demonstrated that the proposed method was effective for the reduction of Poisson noise in scintigrams.

scholarly journals Image Denoising Based on Wavelet Transform using Visu Thresholding Technique

2018 ◽  
Vol 3 (4) ◽  
pp. 444-449 ◽  
Author(s):  
Pushpa Koranga ◽  
Garima Singh ◽  
Dikendra Verma ◽  
Shshank Chaube ◽  
Anuj Kumar ◽  
...  
Keyword(s):  
Wavelet Transform ◽  
Root Mean Square Error ◽  
Image Denoising ◽  
Environmental Problem ◽  
Signal To Noise Ratio ◽  
Mean Square ◽  
Signal To Noise ◽  
Denoising Method ◽  
Degraded Image

The image often contains noises due to several factors such as a problem in devices or due to an environmental problem etc. Noise is mainly undesired information, which degrades the quality of the picture. Therefore, image denoising method is adopted to remove the noises from the degraded image which in turn improve the quality of the image. In this paper, image denoising has been done by wavelet transform using Visu thresholding techniques for different wavelet families. PSNR (Peak signal to noise ratio) and RMSE (Root Mean Square Error) value is also calculated for different wavelet families.

Singular Values Decomposition and Lifting Wavelet Transform for Speech Signal Embedding into Digital Image

2019 ◽  
Vol 12 (2) ◽  
pp. 138-151
Author(s):  
Mourad Talbi ◽  
Med Salim Bouhlel
Keyword(s):  
Wavelet Transform ◽  
Speech Signal ◽  
Signal To Noise Ratio ◽  
Perceptual Quality ◽  
Lifting Wavelet Transform ◽  
Signal To Noise ◽  
Perceptual Evaluation ◽  
Lifting Wavelet ◽  
Noise Ratio

Background: In this paper, we propose a secure image watermarking technique which is applied to grayscale and color images. It consists in applying the SVD (Singular Value Decomposition) in the Lifting Wavelet Transform domain for embedding a speech image (the watermark) into the host image. Methods: It also uses signature in the embedding and extraction steps. Its performance is justified by the computation of PSNR (Pick Signal to Noise Ratio), SSIM (Structural Similarity), SNR (Signal to Noise Ratio), SegSNR (Segmental SNR) and PESQ (Perceptual Evaluation Speech Quality). Results: The PSNR and SSIM are used for evaluating the perceptual quality of the watermarked image compared to the original image. The SNR, SegSNR and PESQ are used for evaluating the perceptual quality of the reconstructed or extracted speech signal compared to the original speech signal. Conclusion: The Results obtained from computation of PSNR, SSIM, SNR, SegSNR and PESQ show the performance of the proposed technique.

scholarly journals Deep Learning-Based Wavelet Threshold Function Optimization on Noise Reduction in Ultrasound Images

2021 ◽  
Vol 2021 ◽  
pp. 1-8
Author(s):  
Zhuxiang Shen ◽  
Wei Li ◽  
Hui Han
Keyword(s):  
Wavelet Transform ◽  
Image Denoising ◽  
Similarity Index ◽  
Speckle Noise ◽  
Disease Diagnosis ◽  
Function Optimization ◽  
Threshold Function ◽  
Ultrasound Images ◽  
Better Than

To explore the utilization of the convolutional neural network (CNN) and wavelet transform in ultrasonic image denoising and the influence of the optimized wavelet threshold function (WTF) algorithm on image denoising, in this exploration, first, the imaging principle of ultrasound images is studied. Due to the limitation of the principle of ultrasound imaging, the inherent speckle noise will seriously affect the quality of ultrasound images. The denoising principle of the WTF based on the wavelet transform is analyzed. Based on the traditional threshold function algorithm, the optimized WTF algorithm is proposed and applied to the simulation experiment of ultrasound images. By comparing quantitatively and qualitatively with the traditional threshold function algorithm, the advantages of the optimized WTF algorithm are analyzed. The results suggest that the image is denoised by the optimized WTF. The mean square error (MSE), peak signal-to-noise ratio (PSNR), and structural similarity index measurement (SSIM) of the images are 20.796 dB, 34.294 dB, and 0.672 dB, respectively. The denoising effect is better than the traditional threshold function. It can denoise the image to the maximum extent without losing the image information. In addition, in this exploration, the optimized function is applied to the actual medical image processing, and the ultrasound images of arteries and kidneys are denoised separately. It is found that the quality of the denoised image is better than that of the original image, and the extraction of effective information is more accurate. In summary, the optimized WTF algorithm can not only remove a lot of noise but also obtain better visual effect. It has important value in assisting doctors in disease diagnosis, so it can be widely applied in clinics.

scholarly journals Non-local mean filtering algorithm based on deep learning

2018 ◽  
Vol 232 ◽  
pp. 03025
Author(s):  
Baozhong Liu ◽  
Jianbin Liu
Keyword(s):  
Deep Learning ◽  
Noise Reduction ◽  
Image Denoising ◽  
Signal To Noise Ratio ◽  
Denoising Method ◽  
Filtering Algorithm ◽  
Local Mean ◽  
Non Local ◽  
Reduction Effect ◽  
Mean Filtering

Aimed at the problem that the traditional image denoising algorithm is not effective in noise reduction, a new image denoising method is proposed. The method combines deep learning and non-local mean filtering algorithms to denoise the noisy image to obtain better noise reduction effect. By comparing with Gaussian filtering algorithm, median filtering algorithm, bilateral filtering algorithm and early non-local mean filtering algorithm, the noise reduction effect of the new algorithm is better than the traditional method and the peak signal to noise ratio is compared with the early non-local mean algorithm. The performance is better.

scholarly journals A Denoising Method of Ship Radiated Noise Signal Based on Modified CEEMDAN, Dispersion Entropy, and Interval Thresholding

Electronics ◽  
2019 ◽  
Vol 8 (6) ◽  
pp. 597 ◽  
Author(s):  
Guohui Li ◽  
Zhichao Yang ◽  
Hong Yang
Keyword(s):  
Signal To Noise Ratio ◽  
Noise Signal ◽  
Ensemble Empirical Mode Decomposition ◽  
Measurement Technology ◽  
Signal Denoising ◽  
Frequency Noise ◽  
Denoising Method ◽  
Radiated Noise ◽  
Mode Decomposition ◽  
Adaptive Noise

Due to the non-linear and non-stationary characteristics of ship radiated noise (SR-N) signal, the traditional linear and frequency-domain denoising methods cannot be used for such signals. In this paper, an SR-N signal denoising method based on modified complete ensemble empirical mode decomposition (EMD) with adaptive noise (CEEMDAN), dispersion entropy (DE), and interval thresholding is proposed. The proposed denoising method has the following advantages: (1) as an improved version of CEEMDAN, modified CEEMDAN (MCEEMDAN) combines the advantages of EMD and CEEMDAN, and it is more reliable than CEEMDAN and has less consuming time; (2) as a fast complexity measurement technology, DE can effectively identify the type of intrinsic mode function (IMF); and (3) interval thresholding is used for SR-N signal denoising, which avoids loss of amplitude information compared with traditional denoising methods. Firstly, the original signal is decomposed into a series of IMFs using MCEEMDAN. According to the DE value of IMF, the modes are divided into three types: noise IMF, noise-dominated IMF and pure IMF. After noise IMFs are removed, the noise-dominated IMFs are denoised using interval thresholding. Finally, the pure IMF and the processed noise-dominated IMFs are reconstructed to obtain the final denoised signal. The denoising experiments with the Chen’s chaotic system show that the proposed method has a higher signal-to-noise ratio (SNR) than the other three methods. Applying the proposed method to denoise the real SR-N signal, the topological structure of chaotic attractor can be recovered clearly. It is proved that the proposed method can effectively suppress the high-frequency noise of SR-N signal.

scholarly journals ANALYSIS OF SPOT-6 DATA FUSION USING GRAM-SCHMIDT SPECTRAL SHARPENING ON RURAL AREAS

2014 ◽  
Vol 10 (2) ◽  
Author(s):  
Danang Surya Candra
Keyword(s):  
Data Fusion ◽  
Spatial Resolution ◽  
Rural Areas ◽  
Signal To Noise Ratio ◽  
Test Site ◽  
Multispectral Images ◽  
Fused Image ◽  
Pc Method ◽  
Better Than

Image fusion is a process to generate higher spatial resolution multispectral images by fusion of lower resolution multispectral images and higher resolution panchromatic images. It is used to generate not only visually appealing images but also provide detailed images to support applications in remote sensing field, including rural area. The aim of this study was to evaluate the performance of SPOT-6 data fusion using Gram-Schmidt Spectral Sharpening (GS) method on rural areas. GS method was compared with Principle Component Spectral Sharpening (PC) method to evaluate the reliability of GS method. In this study, the performance of GS was presented based on multispectral and panchromatic of SPOT-6 images. The spatial resolution of the multispectral (MS) image was enhanced by merging the high resolution Panchromatic (Pan) image in GS method. The fused image of GS and PC were assessed visually and statistically. Relative Mean Difference (RMD), Relative Variation Difference (RVD), and Peak Signal to Noise Ratio (PSNR) Index were used to assess the fused image statistically. The test sites of rural areas were devided into four main areas i.e., whole area, rice field area, forest area, and settlement. Based on the results, the visual quality of the fused image using GS method was better than using PC method. The color of the fused image using GS was better and more natural than using PC. In the statistical assessment, the RMD results of both methods were similar. In the RVD results, GS method was better then PC method especially in band 1 and band 3. GS method was better than PC method in PSNR result for each test site. It was observed that the Gram-Schmidt method provides the best performance for each band and test site. Thus, GS was a robust method for SPOT-6 data fusion especially on rural areas.

scholarly journals An evaluation of the accelerometer output as a motion artifact signal during photoplethysmograph signal processing control

2020 ◽  
Vol 20 (1) ◽  
pp. 125
Author(s):  
Muhideen Abbas Hasan ◽  
Munther Naif Thiyab ◽  
Settar S. Keream ◽  
Uzba H, Salaman ◽  
Kaleid W. Abid
Keyword(s):  
Adaptive Filters ◽  
Signal To Noise Ratio ◽  
Motion Artifact ◽  
Probe Design ◽  
Real Motion ◽  
Cardiovascular Assessment ◽  
Health Related ◽  
Processing Control ◽  
Adaptive Noise ◽  
Better Than

<span>Photoplethysmography (PPG) sensors are widely used in medical applications due to their attractive properties such as non-invasiveness, inexpensive, and easy setup. However, they are still inefficient in non-stationary states of important measurements related to cardiovascular assessment.  Adaptive noise cancellation (ANC) has existed as a kind of technique to address this issue. Unfortunately, the traditional 3-Axis Accelerometer (ACC) in ANC implementation has failed to provide the real motion artifact (MA) as the main factor for efficient adaptive filtering. In this work, the performance of ACC will be investigated and compared with a new twin photodiodes PPG probe design (TPs-PPD) that has been proven in previous work. The TPs-PPD contained an added covered photodiode (CPD) customized to obtain the MA instead of classic use of ACC. During different motions, PPG data were recorded and processed at the same time by the same two units of adaptive filters using ACC and CPD as noise references. The results indicated a clear failure of the ACC compared to the CPD in determining important features of PPG signal, in addition to the accuracy of signal to noise ratio (SNR) and mean square error (MSE). The CPD was better than ACC as it reduced the MSE by 14 times while the SNR was multiplied 10 times. Without any doubt, it has been proven with evidence that the ACC is not suitable for the processing of human health-related signals while PPG can be used for such purposes.</span>

scholarly journals Echocardiography image denoising using fractal wavelet transform

2018 ◽  
Vol 5 ◽  
pp. 23-33
Author(s):  
Reena Manandhar ◽  
Sanjeeb Prashad Pandey
Keyword(s):  
Image Processing ◽  
Wavelet Transform ◽  
Gaussian Noise ◽  
Medical Image ◽  
Signal To Noise Ratio ◽  
Wiener Filter ◽  
Hard Thresholding ◽  
Echocardiography Image ◽  
Different Types

One of the most important areas in image processing is medical image processing where the quality of the images has become an important issue. Most of the medical images are corrupted with the visual noise, and one of the such images is echocardiography image where this effect is more. So, this research aims to denoise the echocardiography image with fractal wavelet transform and to compare its performance with other wavelet based algorithm like hard thresholding, soft thresholding and wiener filter. Initially, the image is corrupted by the Gaussian noise with varying noise variances and is denoised using above mentioned different wavelet based denoising techniques. On comparison of the obtained results, it is observed that the fractal wavelet transform is well suited for highly degraded echocardiography images in terms of Mean Square Error (MSE) and Peak Signal To Noise Ratio (PSNR) than other wavelet based denoising methods. Further, the work could be enhanced to denoise the echocardiography image corrupted by other different types of noise. This research is limited to denoise the echocardiography image corrupted with Gaussian noise only.

scholarly journals Casting Blanks Cleanliness Evaluation Based on Ultrasonic Microscopy and Morphological Filtering

Metals ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 796
Author(s):  
Heng Ding ◽  
Qingting Qian ◽  
Xue Li ◽  
Zhu Wang ◽  
Min Li
Keyword(s):  
Signal To Noise Ratio ◽  
New Technology ◽  
Continuous Caster ◽  
Internal Quality ◽  
Ultrasound Images ◽  
Morphological Filtering ◽  
Ultrasound Technology ◽  
Metal Materials ◽  
Better Than

The cleanliness of the casting blanks could seriously affect the quality of downstream products. Recently, ultrasound technology has been introduced to detect the inclusions in metal materials. However, due to the anisotropy of the material crystal, the ultrasonic wave has the characteristics of multiple scattering and refraction in its propagation process. This makes it difficult to evaluate the casting blanks cleanliness effectively, for the inclusion echoes are submerged in the background noise. Therefore, the ultrasonic microscope is innovatively proposed to carry out efficient scanning on the casting blanks. In the meantime, the morphological filtering algorithm has the advantages of fewer parameters and faster calculation speed which can be used to increase the signal-to-noise ratio of ultrasound images and extract the defect features more efficiently. In order to verify the effectiveness of the proposed method, specimens were taken from three strands of continuous caster for detection and analysis. The experimental results show that the second strand has the best quality and the cleanliness is 2.2/mm3, which is obviously better than the other two strands. This method will provide a new technology for the quantitative evaluation of the internal quality of the casting blanks.

Sign in / Sign up

Export Citation Format

Share Document