scholarly journals Free Vibrations of a Reddy-Bickford Multi-Span Beam Carrying Multiple Spring-Mass Systems

2011 ◽  
Vol 18 (5) ◽  
pp. 709-726 ◽  
Author(s):  
Yusuf Yesilce
Keyword(s):  
Free Vibration ◽  
Vibration Analysis ◽  
Natural Frequencies ◽  
Free Vibration Analysis ◽  
Beam Theory ◽  
Free Vibrations ◽  
Mode Shapes ◽  
Structural Elements ◽  
Mass System ◽  
Assembly Technique

The structural elements supporting motors or engines are frequently seen in technological applications. The operation of machine may introduce additional dynamic stresses on the beam. It is important, then, to know the natural frequencies of the coupled beam-mass system, in order to obtain a proper design of the structural elements. The literature regarding the free vibration analysis of Bernoulli-Euler and Timoshenko single-span beams carrying a number of spring-mass system and multi-span beams carrying multiple spring-mass systems are plenty, but the free vibration analysis of Reddy-Bickford multi-span beams carrying multiple spring-mass systems has not been investigated by any of the studies in open literature so far. This paper aims at determining the exact solutions for the natural frequencies and mode shapes of Reddy-Bickford beams. The model allows analyzing the influence of the shear effect and spring-mass systems on the dynamic behavior of the beams by using Reddy-Bickford Beam Theory (RBT). The effects of attached spring-mass systems on the free vibration characteristics of the 1–4 span beams are studied. The natural frequencies of Reddy-Bickford single-span and multi-span beams calculated by using the numerical assembly technique and the secant method are compared with the natural frequencies of single-span and multi-span beams calculated by using Timoshenko Beam Theory (TBT); the mode shapes are presented in graphs.

Multistage Coupling of Eight Mistuned Bladed Disk on a Solid Shaft: Part 1—Free Vibration Analysis

2012 ◽  
Author(s):  
Romuald Rzadkowski ◽  
Artur Maurin
Keyword(s):  
Finite Element ◽  
Free Vibration ◽  
Vibration Analysis ◽  
Natural Frequencies ◽  
Free Vibration Analysis ◽  
Free Vibrations ◽  
Rotor Blades ◽  
Mode Shapes ◽  
Bladed Disk ◽  
Centrifugal Stiffening

Considered here was the effect of multistage coupling on the dynamics of a rotor consisting of eight mistuned bladed discs on a solid shaft. Each bladed disc had a different number of rotor blades. Free vibrations were examined using finite element representations of rotating single blades, bladed discs, and the entire rotor. In this study the global rotating mode shapes of eight flexible mistuned bladed discs on shaft assemblies were calculated, taking into account rotational effects such as centrifugal stiffening. The thus obtained natural frequencies of the blade, shaft, bladed disc and entire shaft with discs were carefully examined to discover resonance conditions and coupling effects. This study found that mistuned systems cause far more intensive multistage coupling than tuned ones. The greater the mistuning, the more intense the multistage coupling.

Free Vibration Analysis of an Inflated Toroidal Shell

2002 ◽  
Vol 124 (3) ◽  
pp. 387-396 ◽  
Author(s):  
Akhilesh K. Jha ◽  
Daniel J. Inman ◽  
Raymond H. Plaut
Keyword(s):  
Differential Equations ◽  
Free Vibration ◽  
Vibration Analysis ◽  
Natural Frequencies ◽  
Circular Cross Section ◽  
Free Vibration Analysis ◽  
Longitudinal Direction ◽  
Variable Coefficients ◽  
Mode Shapes ◽  
Toroidal Shell

Free vibration analysis of a free inflated torus of circular cross-section is presented. The shell theory of Sanders, including the effect of pressure, is used in formulating the governing equations. These partial differential equations are reduced to ordinary differential equations with variable coefficients using complete waves in the form of trigonometric functions in the longitudinal direction. The assumed mode shapes are divided into symmetric and antisymmetric groups, each given by a Fourier series in the meridional coordinate. The solutions (natural frequencies and mode shapes) are obtained using Galerkin’s method and verified with published results. The natural frequencies are also obtained for a circular cylinder with shear diaphragm boundary condition as a special case of the toroidal shell. Finally, the effects of aspect ratio, pressure, and thickness on the natural frequencies of the inflated torus are studied.

Free vibration analysis of a rectangular plate carrying multiple various concentrated elements

2003 ◽  
Vol 217 (2) ◽  
pp. 171-183 ◽  
Author(s):  
J-S Wu ◽  
H-M Chou ◽  
D-W Chen
Keyword(s):  
Finite Element ◽  
Free Vibration ◽  
Boundary Conditions ◽  
Rectangular Plate ◽  
Normal Mode ◽  
Vibration Analysis ◽  
Natural Frequencies ◽  
Free Vibration Analysis ◽  
Equation Of Motion ◽  
Mode Shapes

The dynamic characteristic of a uniform rectangular plate with four boundary conditions and carrying three kinds of multiple concentrated element (rigidly attached point masses, linear springs and elastically mounted point masses) was investigated. Firstly, the closed-form solutions for the natural frequencies and the corresponding normal mode shapes of a rectangular ‘bare’ (or ‘unconstrained’) plate (without any attachments) with the specified boundary conditions were determined analytically. Next, by using these natural frequencies and normal mode shapes incorporated with the expansion theory, the equation of motion of the ‘constrained’ plate (carrying the three kinds of multiple concentrated element) were derived. Finally, numerical methods were used to solve this equation of motion to give the natural frequencies and mode shapes of the ‘constrained’ plate. To confirm the reliability of previous free vibration analysis results, a finite element analysis was also conducted. It was found that the results obtained from the above-mentioned two approaches were in good agreement. Compared with the conventional finite element method (FEM), the approach employed in this paper has the advantages of saving computing time and achieving better accuracy, as can be seen from the existing literature.

Free vibration analysis of a single edge cracked symmetric functionally graded stepped beams

2020 ◽  
Vol 23 (16) ◽  
pp. 3415-3428
Author(s):  
Yusuf Cunedioglu ◽  
Shkelzen Shabani
Keyword(s):  
Free Vibration ◽  
Vibration Analysis ◽  
Natural Frequencies ◽  
Crack Depth ◽  
Free Vibration Analysis ◽  
Functionally Graded ◽  
Mode Shapes ◽  
Single Edge ◽  
Functionally Graded Beam ◽  
Cross Sectional

Free vibration analysis of a single edge cracked multi-layered symmetric sandwich stepped Timoshenko beams, made of functionally graded materials, is studied using finite element method and linear elastic fracture mechanic theory. The cantilever functionally graded beam consists of 50 layers, assumed that the second stage of the beam (step part) is created by machining. Thus, providing the material continuity between the two beam stages. It is assumed that material properties vary continuously, along the thickness direction according to the exponential and power laws. A developed MATLAB code is used to find the natural frequencies of three types of the stepped beam, concluding a good agreement with the known data from the literature, supported also by ANSYS software in data verification. In the study, the effects of the crack location, crack depth, power law gradient index, different material distributions, different stepped length, different cross-sectional geometries on natural frequencies and mode shapes are analysed in detail.

Free Vibration Analysis of Shafts on Resilient Bearings Using Timoshenko Beam Theory

1999 ◽  
Vol 121 (2) ◽  
pp. 256-258 ◽  
Author(s):  
S. Karunendiran ◽  
J. W. Zu
Keyword(s):  
Free Vibration ◽  
Timoshenko Beam ◽  
Vibration Analysis ◽  
Free Vibration Analysis ◽  
Beam Theory ◽  
Frequency Equation ◽  
Timoshenko Beam Theory ◽  
Mode Shapes ◽  
Complex Eigenvalues ◽  
First Time

This paper presents an analytical method adopted for the free vibration analysis of a shaft, both ends of which are supported by resilient bearings. The shaft is modeled by Timoshenko beam theory. Based on this model exact frequency equation to calculate complex eigenvalues is derived and presented in complex compact form for the first time. Explicit expressions to compute the corresponding mode shapes are also presented.

Free vibration analysis of nonsymmetrically laminated cross-ply L-shaped frames

2021 ◽  
pp. 146442072110168
Author(s):  
Richard Bachoo
Keyword(s):  
Free Vibration ◽  
Composite Laminates ◽  
Natural Frequencies ◽  
Free Vibration Analysis ◽  
Mode Shapes ◽  
Structural Elements ◽  
Fiber Reinforced ◽  
Reflection And Transmission ◽  
Reinforced Composite ◽  
Elastic Couplings

Fiber-reinforced composite laminates can be tailored to produce structural elastic couplings that optimize their response in dynamic environments. It is therefore essential that the free vibration characteristics of structural elements fabricated from fiber-reinforced composites be accurately modeled and investigated. In this work, an analytical wave-based approach is extended to study the in-plane vibrations of nonsymmetrically laminated cross-ply L-shaped frames. The proposed theory accounts for the effects of shear deformation, rotary inertia, and the elastic coupling between in-plane bending and longitudinal deformations. The reflection matrices at the boundaries, together with the reflection and transmission matrices at the corner joint of the L-shaped frame are derived. A traveling wave approach is then used to systematically assemble the small-order matrices into a single expression that can be used to efficiently calculate the exact natural frequencies. An expression for evaluating the mode shapes of the frame for general boundary conditions is also given. The application of the wave-based method is illustrated through several numerical examples and the results are validated using independent finite element models. As part of the numerical analysis, the influence of the number of cross-ply layers on the natural frequencies is investigated.

Free Vibration Analysis of a Beam Under Axial Load Carrying a Mass-Spring-Mass

2012 ◽  
Author(s):  
O. R. Barry ◽  
Y. Zhu ◽  
J. W. Zu ◽  
D. C. D. Oguamanam
Keyword(s):  
Free Vibration ◽  
Vibration Analysis ◽  
Axial Load ◽  
Equations Of Motion ◽  
Tensile Load ◽  
Free Vibration Analysis ◽  
Frequency Equation ◽  
Mode Shapes ◽  
Mass System ◽  
Mass Spring

This paper deals with the free vibration analysis of a beam subjected to an axial tensile load with an attached in-span mass-spring-mass system. The equations of motion are derived by means of the Hamilton principle and an explicit expression of the frequency equation is presented. The formulation is validated with results in the literature and the finite element method. Parametric studies are done to investigate the effect of the axial load, the magnitude and location of the mass-spring-mass system on the lowest five natural frequencies and mode shapes. The results indicate that the fundamental mode is independent of the tension and the in-span mass. However, a significant change in all modes is observed when the position of the mass-spring-mass is varied.

FINITE ELEMENT ANALYSIS OF CONTROLLED LOW STRENGTH MATERIAL PAVEMENT BASES: FREE VIBRATION ANALYSIS

2017 ◽  
Vol 4 (1) ◽  
Author(s):  
Li-Jeng Huang ◽  
Her-Yung Wang ◽  
Wen-Ling Huang ◽  
Ming-Chao Lin
Keyword(s):  
Finite Element ◽  
Free Vibration ◽  
Vibration Analysis ◽  
Natural Frequencies ◽  
Free Vibration Analysis ◽  
Crushed Stone ◽  
Mode Shapes ◽  
Strength Material ◽  
Low Strength ◽  
Controlled Low Strength Material

This paper presents free vibration analysis of pavement bases constructed using sustainable material, a controlled low-strength material (CLSM), using finite element (FE) method. The CLSM concrete is introduced as pavement bases for its special features of easy compaction, high workability and relatively low cost. Rut-resistant stone matrix asphalt is placed on top of CLSM as wearing surface layer. The Young's moduli of CLSM are obtained from laboratory tests for two different binder mixtures, marked as CLSM-B80/30% and CLSM-B130/30%. Two-dimensional planar strain assumption is employed in the FE formulation of steady-state elasto-dynamic analysis of four-layered flexible pavements in which four kinds of different base materials are considered: graded crushed stone, CLSM-B80/30%, CLSM-B130/30% and AC. Comparison study on computed natural frequencies and mode shapes of the flexible pavement using different bases materials will be conducted. Results show that CLSM pavement bases depict higher natural frequencies as compared with graded crushed stone bases and can be suitable sustainable materials employed for pavement design and construction in highway engineering.

scholarly journals Analytical Solution for the Free Vibration Analysis of Delaminated Timoshenko Beams

2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
Ramazan-Ali Jafari-Talookolaei ◽  
Maryam Abedi
Keyword(s):  
Analytical Solution ◽  
Free Vibration ◽  
Variational Problem ◽  
Lagrange Multipliers ◽  
Vibration Analysis ◽  
Natural Frequencies ◽  
Free Vibration Analysis ◽  
Mode Shapes ◽  
Timoshenko Beams ◽  
Method Of Lagrange Multipliers

This work presents a method to find the exact solutions for the free vibration analysis of a delaminated beam based on the Timoshenko type with different boundary conditions. The solutions are obtained by the method of Lagrange multipliers in which the free vibration problem is posed as a constrained variational problem. The Legendre orthogonal polynomials are used as the beam eigenfunctions. Natural frequencies and mode shapes of various Timoshenko beams are presented to demonstrate the efficiency of the methodology.

Free Vibration Analysis of Cracked Composite Beams Subjected to Coupled Bending-Torsion Loads Based on a First Order Beam Theory

2013 ◽  
Vol 325-326 ◽  
pp. 1318-1323 ◽  
Author(s):  
A.R. Daneshmehr ◽  
D.J. Inman ◽  
A.R. Nateghi
Keyword(s):  
Free Vibration ◽  
Boundary Conditions ◽  
Vibration Analysis ◽  
Natural Frequencies ◽  
Free Vibration Analysis ◽  
Beam Theory ◽  
Order Theory ◽  
Composite Beams ◽  
First Order ◽  
First Order Theory

In this paper free vibration analysis of cracked composite beams subjected to coupled bending-torsion loads are presented. The composite beam is assumed to have an open edge crack. A first order theory is applied to count for the effect of the shear deformations on natural frequencies as well as the effect of coupling in torsion and bending modes of vibration. Local flexibility matrix is used to obtain the additional boundary conditions of the beam in the crack area. After obtaining the governing equations and boundary conditions, GDQ method is applied to solve the obtained eigenvalue problem. Finally, some numerical results are given to show the efficacy of the method. In addition, to count for the effect of coupling on natural frequencies of the cracked beams, different fiber orientations are assumed and studied.

Sign in / Sign up

Export Citation Format

Share Document