scholarly journals Pulsed Current Activated Consolidation of Nanostructured Fe3Al and Its Mechanical Property

2011 ◽  
Vol 2011 ◽  
pp. 1-5 ◽  
Author(s):  
Tae-Wan Kim ◽  
In-Yong Ko ◽  
Jung-Mann Doh ◽  
Jin-Kook Yoon ◽  
In-Jin Shon
Keyword(s):  
Mechanical Property ◽  
Grain Size ◽  
Ball Milling ◽  
High Energy ◽  
High Energy Ball Milling ◽  
Sintering Behavior ◽  
Pulsed Current ◽  
Activated Sintering ◽  
Energy Ball ◽  
Sintering Method

A nanopowder ofFe3Alwas synthesized from 3Fe and Al by high-energy ball milling. A dense nanostructuredFe3Alwas consolidated by pulsed current activated sintering method within 2 minutes from mechanically synthesized powders ofFe3Aland horizontally milled powders of 3Fe+Al. The grain size, sintering behavior, and hardness ofFe3Alsintered from horizontally milled 3Fe+Al powders and high-energy ball milledFe3Alpowder were compared.

Phase development during high-energy ball-milling of zinc oxide and iron – the impact of grain size on the source and the degree of contamination

2015 ◽  
Vol 44 (43) ◽  
pp. 18870-18881 ◽  
Author(s):  
G. Štefanić ◽  
S. Krehula ◽  
I. Štefanić
Keyword(s):  
Grain Size ◽  
Zinc Oxide ◽  
Ball Milling ◽  
High Energy ◽  
High Energy Ball Milling ◽  
Degree Of Contamination ◽  
Phase Development ◽  
Energy Ball ◽  
The Impact

The impact of grain size on the source and the degree of contamination.

Pb(ZrxTi1−x)O3 ceramics via reactive sintering of partially reacted mixture produced by a high-energy ball milling process

2001 ◽  
Vol 16 (6) ◽  
pp. 1636-1643 ◽  
Author(s):  
L. B. Kong ◽  
J. Ma ◽  
T. S. Zhang ◽  
W. Zhu ◽  
O. K. Tan
Keyword(s):  
Ball Milling ◽  
Ferroelectric Properties ◽  
High Energy ◽  
Milling Process ◽  
High Energy Ball Milling ◽  
Sintering Behavior ◽  
Reactive Sintering ◽  
Pzt Ceramics ◽  
Ball Milling Process ◽  
Energy Ball

Partially reacted mixtures of Pb(ZrxTi1−x)O3 and its corresponding starting oxide components were obtained by a high-energy ball milling process. The partially reacted powders were characterized by x-ray diffraction and scanning electron microscopy techniques. The sintering behavior of the milled mixtures has demonstrated a distinct volumetric expansion before the densification of the samples, which clearly shows the occurrence of a reactive sintering process of the partially reacted powders. Such process requires a lower densification temperature as compared with the PZT powders produced by the conventional solid-state reaction process. PZT ceramics were found to form directly from the partially reacted powders sintered at 900–1200 °C. The dielectric and ferroelectric properties of the PZT ceramics as a function of sintering temperature and milling time were also studied and discussed.

scholarly journals An Investigation of the Stability of Y2O3and Sintering Behavior of Fe-Based ODS Particles Prepared by High Energy Ball Milling

2013 ◽  
Vol 20 (4) ◽  
pp. 275-279 ◽  
Author(s):  
Eun-Kwang Park ◽  
Sung-Mo Hong ◽  
Jin-Ju Park ◽  
Min-Ku Lee ◽  
Chang-Kyu Rhee ◽  
...  
Keyword(s):  
Ball Milling ◽  
High Energy ◽  
High Energy Ball Milling ◽  
Sintering Behavior ◽  
Energy Ball ◽  
The Stability

Effects of high energy ball-milling on the sintering behavior and piezoelectric properties of PZT-based ceramics

2007 ◽  
Vol 33 (7) ◽  
pp. 1283-1286 ◽  
Author(s):  
Jae Shin Lee ◽  
Mun Seok Choi ◽  
Nguyen Viet Hung ◽  
Young Sun Kim ◽  
Ill Won Kim ◽  
...  
Keyword(s):  
Ball Milling ◽  
Piezoelectric Properties ◽  
High Energy ◽  
High Energy Ball Milling ◽  
Sintering Behavior ◽  
Energy Ball

Rapid Consolidation of Nanocrystalline Al2O3 Reinforced Cr Composite from Mechanically Alloyed Powders by Pulsed Current Activated Sintering

2010 ◽  
Vol 123-125 ◽  
pp. 197-200 ◽  
Author(s):  
In Jin Shon ◽  
Hyun Su Kang ◽  
Dong Mok Lee ◽  
Kwon Il Na ◽  
In Yong Ko
Keyword(s):  
Mechanical Properties ◽  
Grain Size ◽  
High Energy ◽  
Pulsed Current ◽  
Mechanically Alloyed ◽  
Activated Sintering ◽  
Simultaneous Application ◽  
Al2o3 Composite ◽  
Average Grain Size ◽  
Energy Ball

Nanopowders of Cr and Al2O3 was fabricated from CrO3 and 2Al by high energy ball milling. Dense nanocrystalline Cr-Al2O3 composite was consolidated by pulsed current activated sintering (PCAS) method within 1 min from mechanically alloyed powders. Highly dense Cr-Al2O3 with relative density of up to 99% was produced under simultaneous application of a 80 MPa pressure and the pulsed current. The average grain size and mechanical properties of the composite were investigated.

Effect of high energy ball milling on compressibility and sintering behavior of alumina nanoparticles

2012 ◽  
Vol 38 (4) ◽  
pp. 2627-2632 ◽  
Author(s):  
A. Eskandari ◽  
M. Aminzare ◽  
Z. Razavi hesabi ◽  
S.H. Aboutalebi ◽  
S.K. Sadrnezhaad
Keyword(s):  
Ball Milling ◽  
High Energy ◽  
High Energy Ball Milling ◽  
Alumina Nanoparticles ◽  
Sintering Behavior ◽  
Energy Ball
Sign in / Sign up

Export Citation Format

Share Document