scholarly journals Target and PADC Track Detectors for Rare Isotope Studies

2011 ◽  
Vol 2011 ◽  
pp. 1-7 ◽  
Author(s):  
J. Bermudez ◽  
L. Sajo-Bohus ◽  
L. Tecchio ◽  
J. K. Palfalvi ◽  
D. Palacios
Keyword(s):  
High Power ◽  
Theoretical Calculations ◽  
Ion Beam ◽  
Isotope Separation ◽  
Integral Form ◽  
Monte Carlo Code ◽  
Rare Isotope ◽  
Track Formation ◽  
Passive Detector ◽  
On Line

A higher yield of rare isotope production methods, for example, isotope separation on-line (ISOL), is expected to be developed for the EURISOL facility. In this paper as a part of the ongoing project, high power-target assembly and passive detector inclusion are given. Theoretical calculations of several configurations were done using Monte Carlo code FLUKA aimed to produce 1015 fiss/s on LEU-Cx target. The proposed radioactive ion beam (RIB) production relies on a high-power (4 MW) multibody target; a complete target design is given. Additionally we explore the possibility to employ PADC passive detector as a complementary system for RIB characterization, since these already demonstrated their importance in nuclear interactions phenomenology. In fact, information and recording rare and complex reaction product or short-lived isotope detection is obtained in an integral form through latent track formation. Some technical details on track formation and PADC detector etching conditions complete this study.

scholarly journals Early Evaluation of Copper Radioisotope Production at ISOLPHARM

Molecules ◽  
2018 ◽  
Vol 23 (10) ◽  
pp. 2437 ◽  
Author(s):  
Francesca Borgna ◽  
Michele Ballan ◽  
Chiara Favaretto ◽  
Marco Verona ◽  
Marianna Tosato ◽  
...  
Keyword(s):  
Nuclear Physics ◽  
Specific Activity ◽  
Isotope Separation ◽  
Pure Copper ◽  
Mass Separation ◽  
Monte Carlo Code ◽  
Early Evaluation ◽  
On Line ◽  
Isol Facility

The ISOLPHARM (ISOL technique for radioPHARMaceuticals) project is dedicated to the development of high purity radiopharmaceuticals exploiting the radionuclides producible with the future Selective Production of Exotic Species (SPES) Isotope Separation On-Line (ISOL) facility at the Legnaro National Laboratories of the Italian National Institute for Nuclear Physics (INFN-LNL). At SPES, a proton beam (up to 70 MeV) extracted from a cyclotron will directly impinge a primary target, where the produced isotopes are released thanks to the high working temperatures (2000 °C), ionized, extracted and accelerated, and finally, after mass separation, only the desired nuclei are collected on a secondary target, free from isotopic contaminants that decrease their specific activity. A case study for such project is the evaluation of the feasibility of the ISOL production of 64Cu and 67Cu using a zirconium germanide target, currently under development. The producible activities of 64Cu and 67Cu were calculated by means of the Monte Carlo code FLUKA, whereas dedicated off-line tests with stable beams were performed at LNL to evaluate the capability to ionize and recover isotopically pure copper.

Enhanced biological phosphorus removal process implemented in membrane bioreactors to improve phosphorous recovery and recycling

2003 ◽  
Vol 48 (1) ◽  
pp. 87-94 ◽  
Author(s):  
B. Lesjean ◽  
R. Gnirss ◽  
C. Adam ◽  
M. Kraume ◽  
F. Luck
Keyword(s):  
Phosphorus Removal ◽  
Theoretical Calculations ◽  
Enhanced Biological Phosphorus Removal ◽  
Biological Phosphorus Removal ◽  
P Limitation ◽  
Batch Tests ◽  
P Content ◽  
On Line ◽  
Biological Phosphorus ◽  
P Removal

The enhanced biological phosphorus removal (EBPR) process was adapted to membrane bioreactor (MBR) technology. One bench-scale plant (BSP, 200-250 L) and two pilot plants (PPs, 1,000-3,000 L each) were operated under several configurations, including pre-denitrification and post-denitrification without addition of carbon source, and two solid retention times (SRT) of 15 and 26 d. The trials showed that efficient Bio-P removal can be achieved with MBR systems, in both pre- and post-denitrification configurations. EBPR dynamics could be clearly demonstrated through batch-tests, on-line measurements, profile analyses, P-spiking trials, and mass balances. High P-removal performances were achieved even with high SRT of 26 d, as around 9 mgP/L could be reliably removed. After stabilisation, the sludge exhibited phosphorus contents of around 2.4%TS. When spiked with phosphorus (no P-limitation), P-content could increase up to 6%TS. The sludge is therefore well suited to agricultural reuse with important fertilising values. Theoretical calculations showed that increased sludge age should result in a greater P-content. This could not be clearly demonstrated by the trials. This effect should be all the more significant as the influent is low in suspended solids.

scholarly journals Yttrium Oxide Freeze-Casts: Target Materials for Radioactive Ion Beams

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2864
Author(s):  
Eva Kröll ◽  
Miriana Vadalà ◽  
Juliana Schell ◽  
Simon Stegemann ◽  
Jochen Ballof ◽  
...  
Keyword(s):  
Pore Structure ◽  
Yttrium Oxide ◽  
Ion Beam ◽  
Isotope Separation ◽  
Target Material ◽  
Ion Beams ◽  
Radioactive Isotopes ◽  
Solid Loading ◽  
Radioactive Ion Beams ◽  
Freeze Casting

Highly porous yttrium oxide is fabricated as ion beam target material in order to produce radioactive ion beams via the Isotope Separation On Line (ISOL) method. Freeze casting allows the formation of an aligned pore structure in these target materials to improve the isotope release. Aqueous suspensions containing a solid loading of 10, 15, and 20 vol% were solidified with a unidirectional freeze-casting setup. The pore size and pore structure of the yttrium oxide freeze-casts are highly affected by the amount of solid loading. The porosity ranges from 72 to 84% and the crosslinking between the aligned channels increases with increasing solid loading. Thermal aging of the final target materials shows that an operation temperature of 1400 °C for 96 h has no significant effect on the microstructure. Thermo-mechanical calculation results, based on a FLUKA simulation, are compared to measured compressive strength and forecast the mechanical integrity of the target materials during operation. Even though they were developed for the particular purpose of the production of short-lived radioactive isotopes, the yttria freeze-cast scaffolds can serve multiple other purposes, such as catalyst support frameworks or high-temperature fume filters.

High-Power Ion Beam Characteristics of a Magnetic Multi-Pole Line-Cusp Ion Source for the HL-2A Tokomak

2009 ◽  
Vol 26 (8) ◽  
pp. 082901 ◽  
Author(s):  
Zou Gui-Qing ◽  
Lei Guang-Jiu ◽  
Jiang Shao-Feng ◽  
Cao Jian-Yong ◽  
Yu Li-Ming ◽  
...  
Keyword(s):  
High Power ◽  
Ion Beam ◽  
Ion Source ◽  
Beam Characteristics

scholarly journals The ISOLPHARM project: A New ISOL production method of high specific activity beta-emitting radionuclides as radiopharmaceutical precursors

2018 ◽  
Vol 48 ◽  
pp. 1860103 ◽  
Author(s):  
A. Andrighetto ◽  
F. Borgna ◽  
M. Ballan ◽  
S. Corradetti ◽  
E. Vettorato ◽  
...  
Keyword(s):  
Nuclear Reactions ◽  
Specific Activity ◽  
Isotope Separation ◽  
High Specific Activity ◽  
Target Material ◽  
Mass Range ◽  
Production Method ◽  
Radioactive Isotopes ◽  
Innovative Technology ◽  
On Line

The ISOLPHARM project explores the feasibility of exploiting an innovative technology to produce extremely high specific activity beta-emitting radionuclides as radiopharmaceutical precursors. This technique is expected to produce radiopharmaceuticals that are virtually mainly impossible to obtain in standard production facilities, at lower cost and with less environmental impact than traditional techniques. The groundbreaking ISOLPHARM method investigated in this project has been granted an international patent (INFN). As a component of the SPES (Selective Production of Exotic Species) project at the Istituto Nazionale di Fisica Nucleare–Laboratori Nazionali di Legnaro (INFN–LNL), a new facility will produce radioactive ion beams of neutron-rich nuclei with high purity and a mass range of 80–160 amu. The radioactive isotopes will result from nuclear reactions induced by accelerating 40 MeV protons in a cyclotron to collide on a target of UC[Formula: see text]. The uranium in the target material will be [Formula: see text]U, yielding radioactive isotopes that belong to elements with an atomic number between 28 and 57. Isotope separation on line (ISOL) is adopted in the ISOLPHARM project to obtain pure isobaric beams for radiopharmaceutical applications, with no isotopic contaminations in the beam or subsequent trapping substrate. Isobaric contaminations may potentially affect radiochemical and radionuclide purity, but proper methods to separate chemically different elements can be developed.

Sign in / Sign up

Export Citation Format

Share Document