scholarly journals Interdigitated Electrophotocatalytic Cell for Water Purification

2011 ◽  
Vol 2011 ◽  
pp. 1-7 ◽  
Author(s):  
Guy Shemer ◽  
Yaron Paz
Keyword(s):  
Water Purification ◽  
Short Distance ◽  
Rhodamine 6G ◽  
Low Cost ◽  
Oxygen Species ◽  
Positive Bias ◽  
Self Assembled Monolayer ◽  
Interdigitated Electrodes ◽  
Activated Oxygen ◽  
And Performance

The preparation, characterization, and performance of an electrophotocatalytic cell, made of low-cost, planar interdigitated electrodes is reported hereby. The operation of the cell under small positive bias was demonstrated by photocatalytically degrading the dye rhodamine 6G in solution as well as by monitoring the degradation of self-assembled monolayer chemisorbed on the TiO2electrode. Results point out to the importance of activated oxygen species formed in the process and suggest that the short distance between the two electrodes provides a way to utilize the activated oxygen species formed at the negatively biased electrode.

scholarly journals Characterization Techniques as Supporting Tools for the Interpretation of Biochar Adsorption Efficiency in Water Treatment: A Critical Review

Molecules ◽  
2021 ◽  
Vol 26 (16) ◽  
pp. 5063
Author(s):  
Michele Castiglioni ◽  
Luca Rivoira ◽  
Irene Ingrando ◽  
Massimo Del Bubba ◽  
Maria Concetta Bruzzoniti
Keyword(s):  
Water Treatment ◽  
Water Purification ◽  
Low Cost ◽  
Efficiency Index ◽  
Adsorption Efficiency ◽  
The Past ◽  
Physicochemical Features ◽  
And Performance ◽  
The Individual ◽  
Significant Attention

Over the past decade, biochar (BC) has received significant attention in many environmental applications, including water purification, since it is available as a low-cost by-product of the energetic valorisation of biomass. Biochar has many intrinsic characteristics, including its porous structure, which is similar to that of activated carbon (AC), which is the most widely used sorbent in water treatment. The physicochemical and performance characteristics of BCs are usually non-homogenously investigated, with several studies only evaluating limited parameters, depending on the individual perspective of the author. Within this review, we have taken an innovative approach to critically survey the methodologies that are generally used to characterize BCs and ACs to propose a comprehensive and ready-to-use database of protocols. Discussion about the parameters of chars that are usually correlated with adsorption performance in water purification is proposed, and we will also consider the physicochemical properties of pollutants (i.e., Kow). Uniquely, an adsorption efficiency index BC/AC is presented and discussed, which is accompanied by an economic perspective. According to our survey, non-homogeneous characterization approaches limit the understanding of the correlations between the pollutants to be removed and the physicochemical features of BCs. Moreover, the investigations of BC as an adsorption medium necessitate dedicated parallel studies to compare BC characteristics and performances with those of ACs.

Programmable Integrated Photonics

2020 ◽  
Author(s):  
José Capmany ◽  
Daniel Pérez
Keyword(s):  
Integrated Circuit ◽  
Performance Monitoring ◽  
Low Cost ◽  
Limiting Factors ◽  
External Control ◽  
Integrated Photonics ◽  
New Paradigm ◽  
Photonic Integrated Circuit ◽  
And Performance ◽  
Application Fields

Programmable Integrated Photonics (PIP) is a new paradigm that aims at designing common integrated optical hardware configurations, which by suitable programming can implement a variety of functionalities that, in turn, can be exploited as basic operations in many application fields. Programmability enables by means of external control signals both chip reconfiguration for multifunction operation as well as chip stabilization against non-ideal operation due to fluctuations in environmental conditions and fabrication errors. Programming also allows activating parts of the chip, which are not essential for the implementation of a given functionality but can be of help in reducing noise levels through the diversion of undesired reflections. After some years where the Application Specific Photonic Integrated Circuit (ASPIC) paradigm has completely dominated the field of integrated optics, there is an increasing interest in PIP justified by the surge of a number of emerging applications that are and will be calling for true flexibility, reconfigurability as well as low-cost, compact and low-power consuming devices. This book aims to provide a comprehensive introduction to this emergent field covering aspects that range from the basic aspects of technologies and building photonic component blocks to the design alternatives and principles of complex programmable photonics circuits, their limiting factors, techniques for characterization and performance monitoring/control and their salient applications both in the classical as well as in the quantum information fields. The book concentrates and focuses mainly on the distinctive features of programmable photonics as compared to more traditional ASPIC approaches.

The Use of Microcomputer Simulations in Undergraduate Neurophysiology Experiments

1987 ◽  
Vol 14 (3) ◽  
pp. 134-140 ◽  
Author(s):  
K.A. Clarke
Keyword(s):  
Low Cost ◽  
Animal Experiments ◽  
Theoretical Background ◽  
General Purpose ◽  
Microcomputer System ◽  
Laboratory Equipment ◽  
Teaching Objectives ◽  
Compound Action Potentials ◽  
Experimental Management ◽  
And Performance

Practical classes in neurophysiology reinforce and complement the theoretical background in a number of ways, including demonstration of concepts, practice in planning and performance of experiments, and the production and maintenance of viable neural preparations. The balance of teaching objectives will depend upon the particular group of students involved. A technique is described which allows the embedding of real compound action potentials from one of the most basic introductory neurophysiology experiments—frog sciatic nerve, into interactive programs for student use. These retain all the elements of the “real experiment” in terms of appearance, presentation, experimental management and measurement by the student. Laboratory reports by the students show that the experiments are carefully and enthusiastically performed and the material is well absorbed. Three groups of student derive most benefit from their use. First, students whose future careers will not involve animal experiments do not spend time developing dissecting skills they will not use, but more time fulfilling the other teaching objectives. Second, relatively inexperienced students, struggling to produce viable neural material and master complicated laboratory equipment, who are often left with little time or motivation to take accurate readings or ponder upon neurophysiological concepts. Third, students in institutions where neurophysiology is taught with difficulty because of the high cost of equipment and lack of specific expertise, may well have access to a low cost general purpose microcomputer system.

Sandwich hydrogel with confined plasmonic Cu/carbon cells for efficient solar water purification

2021 ◽  
Author(s):  
Cheng Tian ◽  
Chengcheng Li ◽  
Delun Chen ◽  
Yifan Li ◽  
LEI XING ◽  
...  
Keyword(s):  
Solar Energy ◽  
Water Purification ◽  
Low Cost ◽  
Energy Utilization ◽  
Solar Water ◽  
Solar Energy Utilization

Designing low-cost and efficient evaporation system to maximize solar energy utilization is of great importance for the emerging solar water purification technologies. Herein, we demonstrate a universal sandwich hydrogel by...

High‐Yield and Low‐Cost Solar Water Purification via Hydrogel‐Based Membrane Distillation

2021 ◽  
pp. 2101036
Author(s):  
Hengyi Lu ◽  
Wen Shi ◽  
Fei Zhao ◽  
Wenjing Zhang ◽  
Peixin Zhang ◽  
...  
Keyword(s):  
Water Purification ◽  
Low Cost ◽  
Membrane Distillation ◽  
High Yield ◽  
Solar Water

scholarly journals Experiments with Neural Networks in the Identification and Control of a Magnetic Levitation System Using a Low-Cost Platform

2021 ◽  
Vol 11 (6) ◽  
pp. 2535
Author(s):  
Bruno E. Silva ◽  
Ramiro S. Barbosa
Keyword(s):  
Neural Networks ◽  
Neural Control ◽  
Magnetic Levitation ◽  
Low Cost ◽  
Training Data ◽  
Neural Controllers ◽  
Levitation System ◽  
Internal Model Controller ◽  
Magnetic Levitation System ◽  
And Performance

In this article, we designed and implemented neural controllers to control a nonlinear and unstable magnetic levitation system composed of an electromagnet and a magnetic disk. The objective was to evaluate the implementation and performance of neural control algorithms in a low-cost hardware. In a first phase, we designed two classical controllers with the objective to provide the training data for the neural controllers. After, we identified several neural models of the levitation system using Nonlinear AutoRegressive eXogenous (NARX)-type neural networks that were used to emulate the forward dynamics of the system. Finally, we designed and implemented three neural control structures: the inverse controller, the internal model controller, and the model reference controller for the control of the levitation system. The neural controllers were tested on a low-cost Arduino control platform through MATLAB/Simulink. The experimental results proved the good performance of the neural controllers.

scholarly journals Shape Effects of Ceria Nanoparticles on the Water‒Gas Shift Performance of CuOx/CeO2 Catalysts

Catalysts ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 753
Author(s):  
Maria Lykaki ◽  
Sofia Stefa ◽  
Sónia A. C. Carabineiro ◽  
Miguel A. Soria ◽  
Luís M. Madeira ◽  
...  
Keyword(s):  
Low Cost ◽  
Catalytic Performance ◽  
Fine Tuning ◽  
Water Gas Shift ◽  
Oxygen Species ◽  
Ceria Nanoparticles ◽  
Ceo2 Sample ◽  
Equilibrium Conversion ◽  
Shape Effects ◽  
Water Gas

The copper–ceria (CuOx/CeO2) system has been extensively investigated in several catalytic processes, given its distinctive properties and considerable low cost compared to noble metal-based catalysts. The fine-tuning of key parameters, e.g., the particle size and shape of individual counterparts, can significantly affect the physicochemical properties and subsequently the catalytic performance of the binary oxide. To this end, the present work focuses on the morphology effects of ceria nanoparticles, i.e., nanopolyhedra (P), nanocubes (C), and nanorods (R), on the water–gas shift (WGS) performance of CuOx/CeO2 catalysts. Various characterization techniques were employed to unveil the effect of shape on the structural, redox and surface properties. According to the acquired results, the support morphology affects to a different extent the reducibility and mobility of oxygen species, following the trend: R > P > C. This consequently influences copper–ceria interactions and the stabilization of partially reduced copper species (Cu+) through the Cu2+/Cu+ and Ce4+/Ce3+ redox cycles. Regarding the WGS performance, bare ceria supports exhibit no activity, while the addition of copper to the different ceria nanostructures alters significantly this behaviour. The CuOx/CeO2 sample of rod-like morphology demonstrates the best catalytic activity and stability, approaching the thermodynamic equilibrium conversion at 350 °C. The greater abundance in loosely bound oxygen species, oxygen vacancies and highly dispersed Cu+ species can be mainly accounted for its superior catalytic performance.

Sign in / Sign up

Export Citation Format

Share Document