scholarly journals Enhanced Photocatalytic Activity for Degradation of Methyl Orange over Silica-Titania

2011 ◽  
Vol 2011 ◽  
pp. 1-9 ◽  
Author(s):  
Yaping Guo ◽  
Shaogui Yang ◽  
Xuefei Zhou ◽  
Chunmian Lin ◽  
Yajun Wang ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Methyl Orange ◽  
Specific Surface ◽  
Surface Area ◽  
Calcination Temperature ◽  
Specific Surface Area ◽  
Photoelectron Spectroscopy ◽  
Anatase Phase ◽  
Solution Treatment ◽  
X Ray

Silica-modified titania (SMT) powders with different atomic ratios of silica to titanium (Rx) were successfully synthesized by a simple ultrasonic irradiation technique. The prepared samples were characterized by X-ray diffraction (XRD), FT-IR spectroscopy, transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and ultraviolet visible spectroscopy. The specific surface area was measured according to BET theory. Results indicate that the addition of silica to titania can suppress the crystalline size growth and the transformation of anatase phase to rutile phase of titania, enlarge specific surface area of the titania particles, and result in a blue shift of absorption edge compared to pure titania. The photocatalytic activity of the SMT samples was evaluated by decolorizing methyl orange aqueous solutions under UV-visible light irradiation. It was found in our study that this activity was affected by silica content, calcination temperature, H2SO4, and oxidants such as KIO4, (NH4)2S2O8and H2O2. The results reveal that the photocatalytic activity of 0.1-SMT catalyst is the best among all samples calcined at550°C for 1 h and it is 1.56 times higher than that of Degussa P-25 titania, which is a widely used commercial TiO2made by Germany Degussa company and has been most widely used in industry as photocatalyst, antiultraviolet product, and thermal stabilizer. The optimal calcination temperature for preparation was550°C. The photocatalytic activity of SMT samples is significantly enhanced by H2SO4solution treatment and oxidants.

scholarly journals Synthesis and Characterization of Uniform Spherical Nanoporous TiO2Aerogel Templated by Cellulose Alcohol-Gel with Enhanced Photocatalytic Activity

2016 ◽  
Vol 2016 ◽  
pp. 1-8 ◽  
Author(s):  
Zhiming Liu ◽  
Peng Wu ◽  
Shaoli Yang ◽  
Haiying Wang ◽  
Chunde Jin
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Methyl Orange ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Thermal Method ◽  
X Ray ◽  
Double Beam ◽  
Methyl Orange Dye

The spherical nanoporous TiO2aerogels were prepared by a simple ethanol-thermal method, using spherical cellulose alcohol-gel as the template. The morphology, crystalline structure, pore size, specific surface area, and the photocatalytic activity of obtained TiO2aerogel were separately characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), N2adsorption-desorption isotherms, and double beam UV-VIS spectrophotometer. The characteristics of TiO2aerogels presented uniform sphere shape, good internal structural morphology, high specific surface area (ranging from 111.88 to 149.95 m2/g), and good crystalline anatase phase. Moreover, methyl orange dye was used as the target pollutant to characterize the photocatalytic activities and the adsorption performance. The photocatalytic experiment shows that the obtained spherical TiO2aerogels had a higher degradation ratio of 92.9% on methyl orange dye compared with aspherical TiO2aerogels prepared from other concentrations of tetrabutyl orthotitanate (TBOT).

scholarly journals Structural, photocatalytic and surface analysis of Nb/Ag codoped TiO2 mesoporous nanoparticles

2020 ◽  
Vol 96 (3) ◽  
pp. 728-741
Author(s):  
Mahtab Gorgani ◽  
Behzad Koozegar Kaleji
Keyword(s):  
Photocatalytic Activity ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Band Gap Energy ◽  
Xenon Lamp ◽  
X Ray ◽  
Mesoporous Nanoparticles

Abstract In this study, several TiO2 mesoporous nanoparticles with different mol% of niobium and silver were synthesized using the sol–gel method. The crystalline phase, chemical state, photocatalytic and optical properties, specific surface area, and morphology of mesoporous nanoparticles were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), UV–Vis reflective spectroscopy (UV–Vis), Brunauer–Emmett–Teller-specific surface area (BET) and field emission scanning electron microscopy (FESEM). With increasing calcination temperature, the photocatalytic activity of the samples gradually increased due to the improvement of crystallization of the anatase and rutile phases. Nb/Ag codoping sample calcined at 550 °C has reduced the band gap energy (3.17 eV to 3.06 eV) and improved the photocatalytic properties of samples under visible light (xenon lamp, 200 W for 1 h and 2 h). Doped TiO2 mesoporous nanoparticles were shown to have the highest photocatalytic activity as compared with the pure TiO2 nanoparticles. The best photocatalytic efficiency of codoped TiO2 mesoporous nanoparticles was observed for the TNA3 sample calcined under 550 °C, containing molar contents of Nb (0.5 mol%) and Ag (1 mol%) dopant ions with 95.60% efficiency.

scholarly journals Photodegradation of Microcystin-LR Using Visible Light-Activated C/N-co-Modified Mesoporous TiO2 Photocatalyst

Materials ◽  
2019 ◽  
Vol 12 (7) ◽  
pp. 1027 ◽  
Author(s):  
Tamer Khedr ◽  
Said El-Sheikh ◽  
Adel Ismail ◽  
Ewa Kowalska ◽  
Detlef Bahnemann
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Photoelectron Spectroscopy ◽  
Ph Value ◽  
Hydrothermal Process ◽  
Tio2 Photocatalyst ◽  
X Ray

Microcystin-LR (MC-LR), a potent hepatotoxin produced by the cyanobacteria, is of increasing concern worldwide because of severe and persistent impacts on humans and animals by inhalation and consumption of contaminated waters and food. In this work, MC-LR was removed completely from aqueous solution using visible-light-active C/N-co-modified mesoporous anatase/brookite TiO2 photocatalyst. The co-modified TiO2 nanoparticles were synthesized by a one-pot hydrothermal process, and then calcined at different temperatures (300, 400, and 500 °C). All the obtained TiO2 powders were analyzed by X-ray diffraction (XRD), Raman spectroscopy, transmission electron microscope (TEM), specific surface area (SSA) measurements, ultraviolet-visible diffuse reflectance spectra (UV-vis DRS), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FTIR) spectroscopy, and photoluminescence (PL) analysis. It was found that all samples contained mixed-phase TiO2 (anatase and brookite), and the content of brookite decreased with an increase in calcination temperature, as well as the specific surface area and the content of non-metal elements. The effects of initial pH value, the TiO2 content, and MC-LR concentration on the photocatalytic activity were also studied. It was found that the photocatalytic activity of the obtained TiO2 photocatalysts declined with increasing temperature. The complete degradation (100%) of MC-LR (10 mg L−1) was observed within 3 h, using as-synthesized co-modified TiO2 (0.4 g L−1) at pH 4 under visible light. Based on the obtained results, the mechanism of MC-LR degradation has been proposed.

scholarly journals Synthesis of Ag3PO4 using Hydrophylic Polymer and Their Photocatalytic Activities under Visible Light Irradiation

2017 ◽  
Vol 12 (2) ◽  
pp. 206 ◽  
Author(s):  
Uyi Sulaeman ◽  
Bin Liu ◽  
Shu Yin ◽  
Tsugio Sato
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Visible Light Irradiation ◽  
Photoelectron Spectroscopy ◽  
Light Irradiation ◽  
X Ray ◽  
Photocatalytic Activities

The highly active Ag3PO4 photocatalysts were successfully synthesized using the hydrophylic polymer of PVA (polyvinyl alcohol), PEG (polyethylene glycol) and PVP (polyvinyl pyrrolidone). The products were characterized using X-ray diffraction (XRD), Diffuse reflection spectroscopy (DRS), Field emission scanning electron microscope (FE-SEM), Brunauer–Emmett–Teller (BET) specific surface area, and X-ray photoelectron spectroscopy (XPS). Photocatalytic activities were evaluated using decomposition of Rhodamine B (RhB) under visible light irradiation. The results showed that the PVA, PEG, and PVP increased the specific surface area and enhanced the photocatalytic activity of Ag3PO4. The highest photocatalytic activity could be observed in Ag3PO4 synthesized with PVA, mainly due to an increase in electron excitation induced by PVA chemically adsorbed on the surface. Copyright © 2017 BCREC Group. All rights reservedReceived: 13rd November 2016; Revised: 10th February 2017; Accepted: 10th February 2017How to Cite: Sulaeman, U., Liu, B., Yin, S., Sato, T. (2017). Synthesis of Ag3PO4 using Hydrophylic Polymer and Their Photocatalytic Activities under Visible Light Irradiation. Bulletin of Chemical Reaction Engineering & Catalysis, 12 (2): 206-211 (doi:10.9767/bcrec.12.2.767.206-211)Permalink/DOI: http://dx.doi.org/10.9767/bcrec.12.2.767.206-211 

Effect of Anatase/Rutile Phase Ratio on the Photodegradation of Methylene Blue under UV Irradiation

2020 ◽  
Vol 998 ◽  
pp. 78-83
Author(s):  
Yi Yi Zaw ◽  
Du Ang Dao Channei ◽  
Thotsaphon Threrujirapapong ◽  
Wilawan Khanitchaidecha ◽  
Auppatham Nakaruk
Keyword(s):  
Methylene Blue ◽  
Photocatalytic Activity ◽  
Specific Surface ◽  
Band Gap ◽  
Surface Area ◽  
Calcination Temperature ◽  
Organic Compounds ◽  
Specific Surface Area ◽  
Uv Irradiation ◽  
Rutile Phase

Titanium dioxide (TiO2) is known as one of the widely used catalysts in photocatalysis process. Recently, the photocatalysis of TiO2 has been implied in water purification and treatment, particularly dyes and organic compounds degradations. Naturally, the TiO2 can be found in three phases including anatase, rutile and brookite; each phase has its own specific properties such as grain size, stability and band gap energy. In this work, the effect of calcination temperature on the structure, morphology and photocatalytic activity were investigated. The data suggested that the anatase/rutile ratio of TiO2 can be controlled through the calcination process. The phase transformation data strongly indicated the liner function between percentage of rutile phase and calcination temperature. The BET analysis provided the consistent data with XRD patterns by showing that the specific surface area was decreased by increasing calcination temperature. The photodegradation of methylene blue under UV irradiation proved that the mixed phase of anatase/rutile ratio at 78.5/21.5 provided the highest photocatalytic activity. The phase composition ratio can influence the nanoparticles properties including band gap, specific surface area and energy band structure. Therefore, the control of anatase/rutile ratio was an alternative to enhance the photocatalytic activity of TiO2 nanoparticles for dyes and organic compounds degradations.

scholarly journals Preparation and photocatalytic activity of the layered titanates

2010 ◽  
Vol 4 (2) ◽  
pp. 69-73 ◽  
Author(s):  
Marija Milanovic ◽  
Ivan Stijepovic ◽  
Ljubica Nikolic
Keyword(s):  
Photocatalytic Activity ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
High Photocatalytic Activity ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Bet Method ◽  
Ft Ir

Titanate structures were synthesized in highly alkaline solution using hydrothermal procedure. As-prepared powders were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) and transmission electron microscopy (TEM). A specific surface area of the powders was measured by BET method. Results confirmed formation of layered trititanates, already after one hour of hydrothermal synthesis. To examine the photocatalytic activity of the as-prepared layered titanates, methylene blue (MB) was employed as a target compound in response to visible light at ambient temperature. It was observed that the specific surface area, size distribution and crystallinity are important factors to get high photocatalytic activity for the decomposition of MB. .

CO2 utilization by dry reforming of CH4 over mesoporous Ni/KIT-6 catalyst

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Congming Tang ◽  
Juan Huang ◽  
Dong Zhang ◽  
Qingqing Jiang ◽  
Guilin Zhou
Keyword(s):  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Photoelectron Spectroscopy ◽  
Pore Diameter ◽  
Co2 Utilization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Catalytic Performances

Abstract The mesoporous Ni/KIT-6 catalysts with different composition were prepared by altering reduction temperatures. In addition, their physicochemical properties were characterized by X-ray diffraction, in-situ X-ray photoelectron spectroscopy, and Brunauer–Emmett–Teller techniques. The results shown that the specific surface area, composition and metallic Ni crystallinity of the Ni/KIT-6 catalyst were significantly affected by reduction temperatures. The catalytic performances of the prepared Ni/KIT-6 catalysts were evaluated via the CO2 reforming of CH4 into syngas and followed the order: RT0 < RT250 < RT300 < RT350 < RT400 < RT450 ≈ RT500. The specific surface area, pore volume, pore diameter, and Ni0 content of the most representative RT450 catalyst among of them were 646.7 m2 g−1, 0.92 cm3 g−1, 6.5 nm, and 30.9%, respectively. The CH4 and CO2 conversions of RT450 catalyst reached to 69.0 and 39.4% under a reaction temperature of 600 °C, respectively. The CO selectivity was greater than 49% and the RT450 catalyst had good stability.

Preparation of Activated Alumina Admixture

2011 ◽  
Vol 84-85 ◽  
pp. 489-493
Author(s):  
Xiao Yan Wang ◽  
Hong Jian Wang ◽  
Gui Qin Hou ◽  
Zhao Xia Lv
Keyword(s):  
Specific Surface ◽  
Surface Area ◽  
Calcination Temperature ◽  
Specific Surface Area ◽  
Crystalline State ◽  
Activated Alumina ◽  
Calcination Process ◽  
X Ray ◽  
Active Alumina ◽  
Alkali Aggregate Reaction

Through calcining bauxite, the preparation of active alumina (Al2O3) admixture was investigated. The effect of calcination temperature and time on the activity of alumina was studied. Calcination production species and crystalline state were determined by X-ray diffractometer, and the specific surface area referred as an important parameter was also determined. The results showed that the best calcination process of acquiring activated alumina admixture was 500°C1.0h. Alkali-aggregate reaction was inhibited effectively by the active alumina admixture.

New Silica Supported Titanium Dioxide Catalysts: Characteristics and Photocatalytic Efficiency in Waste Water Depollution

2006 ◽  
Vol 61 (10) ◽  
pp. 1311-1318 ◽  
Author(s):  
Noureddine Kamil ◽  
Mohamed Khalid El Amrani ◽  
Najiba Benjelloun
Keyword(s):  
Titanium Dioxide ◽  
Photocatalytic Activity ◽  
Specific Surface ◽  
Surface Area ◽  
Calcination Temperature ◽  
Specific Surface Area ◽  
Inductively Coupled Plasma ◽  
Aqueous Suspension ◽  
Textile Dye ◽  
Photocatalytic Efficiency

Silica gel supported titanium dioxide photocatalysts were prepared by sintering TiO2/SiO2 mixtures under variations of TiO2 content, calcination temperature and calcination time. The method allowed to obtain catalyst samples, which can be used in aqueous suspension and which were found to be easily separated by decantation after the photocatalytic treatment. The photocatalytic efficiency of the catalysts was tested by carrying out the photooxidation of the textile dye Acid Red 88 (AR88) in aqueous solution, used as “model” water pollutant. The obtained photoefficiency results were correlated to catalyst physicochemical characteristics, as determined by Inductively Coupled Plasma (ICP) analysis, X-ray diffraction, specific surface area (BET) and scanning electron microscopy (SEM). No positive correlation has been observed between titanium dioxide content and photocatalytic efficiency. The decrease of photocatalytic activity at high calcination temperature (1000 °C) is attributed to the phase transition anatase/rutile as well as to the decreasing specific surface area. According to SEM analysis, no significant fixation of TiO2 on silica is observed for catalysts prepared at low temperature (400 °C). The observed photocatalytic activity is consequently due to free TiO2 particles. The best efficiency is observed for photocatalyst prepared at 800 °C and containing around fifty percent titanium dioxide.

scholarly journals Surface Structure Engineering of Nanosheet-Assembled NiFe2O4 Fluffy Flowers for Gas Sensing

Nanomaterials ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 297
Author(s):  
Xiaofeng Wang ◽  
Xu Li ◽  
Guozheng Zhang ◽  
Zihao Wang ◽  
Xue-Zhi Song ◽  
...  
Keyword(s):  
Specific Surface ◽  
Surface Structure ◽  
Surface Area ◽  
Specific Surface Area ◽  
Photoelectron Spectroscopy ◽  
Gas Sensing ◽  
Nitrogen Adsorption ◽  
X Ray ◽  
Adsorption Desorption ◽  
Sensing Performance

In this work, we present a strategy to improve the gas-sensing performance of NiFe2O4 via a controllable annealing Ni/Fe precursor to fluffy NiFe2O4 nanosheet flowers. X-ray diffraction (XRD), a scanning electron microscope (SEM), nitrogen adsorption–desorption measurements and X-ray photoelectron spectroscopy (XPS) were used to characterize the crystal structure, morphology, specific surface area and surface structure. The gas-sensing performance was tested and the results demonstrate that the response was strongly influenced by the specific surface area and surface structure. The resultant NiFe2O4 nanosheet flowers with a heating rate of 8 °C min−1, which have a fluffier morphology and more oxygen vacancies in the surface, exhibited enhanced response and shortened response time toward ethanol. The easy approach facilitates the mass production of gas sensors based on bimetallic ferrites with high sensing performance via controlling the morphology and surface structure.

Sign in / Sign up

Export Citation Format

Share Document