scholarly journals Cytotoxicity Property of Nano-TiO2Sol and Nano-TiO2Powder

2011 ◽  
Vol 2011 ◽  
pp. 1-8 ◽  
Author(s):  
Pingting He ◽  
Jie Tao ◽  
Jianjun Xue ◽  
Yulan Chen
Keyword(s):  
Electron Microscope ◽  
Average Length ◽  
Synthesis Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Structure And Morphology ◽  
Transmission Electron ◽  
Experimental Protocols ◽  
20 Nm

A homogeneous and transparent titania (TiO2) sol with nanosized anatase TiO2particles was prepared by hydrothermal synthesis method. The transmission electron microscope and X-ray diffraction were used to characterize the structure and morphology of particulates in the TiO2sol and purchased TiO2powder. The results show that the homogeneous anatase crystalline phase was formed and the size of the spindle-like particle in sol was about 20 nm in width and 150 nm in average length, and the particulates of the purchased powder were globular-like about 50 nm in diameter. In addition, a consistent set of in vitro experimental protocols was used to study the effects of nano-TiO2sol as prepared and nano-TiO2powder on mouse peritoneal macrophage. The cytotoxicity tests in vitro indicate that, with the increasing of TiO2sol concentration contaminated with the cells, the relative proliferation rate of macrophage cells was improved slightly after the cells contaminated for 24 h, but it reduced rapidly after contaminated for 48 h. The purchased nano-TiO2powder inhibited the growth of the cells obviously as cultivating with macrophage both for 24 h and 48 h.

Template Induced Synthesis of Nano-Hydroxyapatite by Co-Precipitation Method

2011 ◽  
Vol 311-313 ◽  
pp. 1713-1716 ◽  
Author(s):  
Yan Rong Sun ◽  
Tao Fan ◽  
Chang An Wang ◽  
Li Guo Ma ◽  
Feng Liu
Keyword(s):  
Electron Microscope ◽  
Chondroitin Sulfate ◽  
Aspartic Acid ◽  
Transmission Electron Microscope ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Structure And Morphology ◽  
Transmission Electron ◽  
Co Precipitation

Nano-hydroxyapatite with different morphology was synthesized by the co-precipitation method coupled with biomineralization using Ca(NO3)2•4H2O and (NH4)2HPO4 as reagents, adding chondroitin sulfate, agarose and aspartic acid as template. The structure and morphology of the prepared powders were characterized by X-ray diffraction (XRD) and transmission electron microscope (TEM).

Loading of siRNA on Magnetic PLL-Fe2O3@SiO2 Nanocomposites and their Transfection In Vitro

2014 ◽  
Vol 1053 ◽  
pp. 444-449
Author(s):  
Xue Wen Cui ◽  
Gang Cheng ◽  
Rui Jiang Liu ◽  
Li Wei Wang ◽  
Yan Shuai Wang
Keyword(s):  
Electron Microscope ◽  
Precipitation Method ◽  
Blue Staining ◽  
X Ray Diffraction ◽  
X Ray ◽  
Sd Rat ◽  
Gene Carriers ◽  
Transmission Electron ◽  
Co Precipitation

The magnetic Fe2O3 nanoparticles were prepared by co-precipitation method with FeCl3 and NaOH as starting reagents. The surface of Fe2O3 nanoparticles was modified with tetraethyl orthosilicate. Fe2O3@SiO2 nanocomposites were calcined at 600 °C. The nanocomposites were characterized by scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray diffraction (XRD) and energy dispersive X-ray spectroscopy (EDX). The PLL-Fe2O3@SiO2 (SMNP) was prepared by modifying with poly-L-lysine on the surface. The SMNP combined with plasmid siRNA by static electrical charges as one of gene carriers was transfected into SD rat neurons. The results of fluorescence microscope and Prussian blue staining show that SMNP can effectively enter cells. Therefore, SMNP are one kind of novel and effective gene carriers, it can transfect the plasmid which carries the siRNA into SD rats neurons in vitro.

Luminescent Properties of Gd2MoO6:Eu3+ Nanophosphor for WLEDs

2021 ◽  
Author(s):  
Yan Chen ◽  
Yuemei Lan ◽  
Dong Wang ◽  
Guoxing Zhang ◽  
Wenlong Peng ◽  
...  
Keyword(s):  
Electron Microscope ◽  
Transmission Electron Microscope ◽  
Fluorescence Spectra ◽  
Solvothermal Method ◽  
Luminescent Properties ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron

A series of Gd2-xMoO6:xEu3+(x=0.18-0.38) nanophosphors were synthesized by the solvothermal method. The properties of this nanophosphor were characterized by x-ray diffraction (XRD), transmission electron microscope (TEM), fluorescence spectra and diffuse...

scholarly journals Synthesis of Ce1−xPdxO2−δ Solid Solution in Molten Nitrate

Catalysts ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 640
Author(s):  
Hideaki Sasaki ◽  
Keisuke Sakamoto ◽  
Masami Mori ◽  
Tatsuaki Sakamoto
Keyword(s):  
Electron Microscopy ◽  
Solid Solution ◽  
Solid Solutions ◽  
Photoelectron Spectroscopy ◽  
Synthesis Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Co Precipitation ◽  
Ionic States

CeO2-based solid solutions in which Pd partially substitutes for Ce attract considerable attention, owing to their high catalytic performances. In this study, the solid solution (Ce1−xPdxO2−δ) with a high Pd content (x ~ 0.2) was synthesized through co-precipitation under oxidative conditions using molten nitrate, and its structure and thermal decomposition were examined. The characteristics of the solid solution, such as the change in a lattice constant, inhibition of sintering, and ionic states, were examined using X-ray diffraction (XRD), scanning electron microscopy–energy-dispersive X-ray spectroscopy (SEM−EDS), transmission electron microscopy (TEM)−EDS, and X-ray photoelectron spectroscopy (XPS). The synthesis method proposed in this study appears suitable for the easy preparation of CeO2 solid solutions with a high Pd content.

Formation of Graphite Encapsulated Nickel Nanoparticles by Ball Milling and Annealing of Expanded Graphite with Nickel

2011 ◽  
Vol 80-81 ◽  
pp. 217-220 ◽  
Author(s):  
Xue Qing Yue ◽  
Hai Jun Fu ◽  
Da Jun Li
Keyword(s):  
Electron Microscope ◽  
Ball Milling ◽  
Transmission Electron Microscope ◽  
Nickel Nanoparticles ◽  
Size Range ◽  
Expanded Graphite ◽  
X Ray Diffraction ◽  
X Ray ◽  
Nickel Powders ◽  
Transmission Electron

Graphite encapsulated nickel nanoparticles were prepared by ball milling andsubsequently annealing a mixture of expanded graphite with nickel powders. The products were characterized by transmission electron microscope and X-ray diffraction. The formation mechanism of the products was discussed. Results show that the products have a size range of 20-150 nm. The graphite and nickel in the products all exhibit a high crystallinity.

Solvothermal Synthesis of Bi2Se3 Hexagonal Nanosheet Crystals

2011 ◽  
Vol 236-238 ◽  
pp. 1712-1716 ◽  
Author(s):  
Hai Tao Liu ◽  
Jun Dai ◽  
Jia Jia Zhang ◽  
Wei Dong Xiang
Keyword(s):  
Electron Microscope ◽  
Solvothermal Synthesis ◽  
Solvothermal Method ◽  
Raw Materials ◽  
X Ray Diffraction ◽  
Uniform Size ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Scanning Electron

Bismuth selenide (Bi2Se3) hexagonal nanosheet crystals with uniform size were successfully prepared via a solvothermal method at 160°C for 22 h using bismuth trichloride(BiCl3) and selenium powder(Se) as raw materials, sodium bisulfite(NaHSO3) as a reducing agent, diethylene glycol(DEG) as solvent, and ammonia as pH regulator. Various techniques such as X-ray diffraction (XRD), field-emission scanning electron microscope (FESEM), high-resolution transmission electron microscope (HRTEM), and selected area electron diffraction (SAED) were used to characterize the obtained products. Results show that the as-synthesized samples are pure Bi2Se3 hexagonal nanosheet crystals. A possible growth mechanism for Bi2Se3 hexagonal nanosheet crystals is also discussed based on the experiment.

Optimization of Green Synthesis Approach of Silver Nanoparticles Using Indonesian Wild Honey

2021 ◽  
Vol 891 ◽  
pp. 111-115
Author(s):  
Maradhana Agung Marsudi ◽  
Farah Fitria Sari ◽  
Pandu Mauliddin Wicaksono ◽  
Adinda Asmoro ◽  
Arif Basuki ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Silver Nanoparticles ◽  
Green Synthesis ◽  
Synthesis Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Particle Count ◽  
Transmission Electron ◽  
Nitrate Precursor ◽  
Synthesis Approach

In this work, silver nanoparticles have been successfully synthesized using simple and environmentally friendly ‘green synthesis’ method using Indonesian wild honey as mediator. Particle count and size can be optimized by varying the silver nitrate precursor and honey concentration, with the help of sodium hydroxide as pH regulator. Based on X-ray diffraction (XRD) result, crystalline structure of Ag has been confirmed in sample with impurities from AgCl. Based on dynamic light scattering (DLS) and transmission electron microscopy (TEM) results, it was found that the smallest average particles size of AgNPs (117.5 nm from DLS and 11.1 nm from TEM) was obtained at sample with 5% w/v of honey and 0.5 mM of AgNO3.

scholarly journals Effect of Preheating Temperature on Synthesis of Pure BiFeO3 via Sol–Gel Method

Nanopages ◽  
2019 ◽  
pp. 1-11
Author(s):  
G. M. Taha ◽  
M. N. Rashed ◽  
M. S. El-Sadek ◽  
M. A. Moghazy
Keyword(s):  
Electron Microscope ◽  
Transmission Electron Microscope ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
Pure Bifeo3 ◽  
Gel Method ◽  
X Ray ◽  
Sol Gel Method ◽  
Transmission Electron ◽  
Preheating Temperature

Abstract BiFeO3 (BFO) nanopowder was synthesized in a pure form via a sol- gel method based on glycol gel reaction. Effect of drying and preheating temperature on preventing other phases was studied. Many parameters were studied as calcination temperature and time & stirring temperature as well. The prepared powder was characterized by X-Ray Diffraction of powder (XRD) and Transmission Electron Microscope (TEM). High pure BiFeO3 was obtained by preheated process at 400 °C for 0.5 h and calcination at 600 °C for 0.5 h without any impurities compared to dry at110 °C.

PHYSICAL PROPERTIES AND MICROSTRUCTURE PERFORMANCE OF LASER ALLOYING Zn MODIFIED AMORPHOUS-NANOCRYSTALS REINFORCED COATING

NANO ◽  
2013 ◽  
Vol 08 (04) ◽  
pp. 1350038 ◽  
Author(s):  
JIANQUAN LI ◽  
HUASHI LIU ◽  
JIANING LI ◽  
GUOZHONG LI
Keyword(s):  
Wear Resistance ◽  
Titanium Alloy ◽  
Electron Microscope ◽  
Crystallization Process ◽  
Laser Alloying ◽  
X Ray Diffraction ◽  
X Ray ◽  
Amorphous Phases ◽  
Transmission Electron ◽  
Improve Wear Resistance

Zn was firstly used to improve wear resistance of a TA7 (Ti–5Al–2.5Sn) titanium alloy surface by mean of a laser alloying (LA) technique. The synthesis of the hard coating on a TA7 titanium alloy by LA of Co–Ti–Cr–TiB2–Zn–CeO2 pre-placed powders was investigated by means of scanning electron microscope (SEM), X-ray diffraction (XRD) and high resolution transmission electron microscope (HRTEM). Experimental results indicated lot of the nanocrystals, such as Ti–B/CoZn13 and the amorphous phases were produced in such LA coating. The nucleation and growth of the amorphous phases were retarded by the nanocrystals in a certain extent during the crystallization process of the amorphous phases. Compared with a TA7 alloy substrate, an improvement of the wear resistance was obtained for such LA composite coating.

A Novel Tungsten Trioxide Based Gas Sensor for Indoor Formaldehyde Detection

2021 ◽  
Vol 16 (3) ◽  
pp. 363-367
Author(s):  
Gaoqi Zhang ◽  
Fan Zhang ◽  
Kaifang Wang ◽  
Tao Tian ◽  
Shanyu Liu ◽  
...  
Keyword(s):  
Electron Microscope ◽  
Gas Sensor ◽  
Indoor Air ◽  
Gas Sensing ◽  
X Ray Diffraction ◽  
X Ray ◽  
Sensing Material ◽  
Transmission Electron ◽  
Gas Sensing Properties ◽  
Gas Response

Accurate and real-time detection of formaldehyde (HCHO) in indoor air is urgently needed for human health. In this work, a ceramic material (WO3·H2O) with unique structure was successfully prepared using an efficient hydrothermal method. The crystallinity, morphology and microstructure of the as-prepared sensing material were analyzed by X-ray diffraction (XRD), field emission scanning electron microscope (FESEM) as well as transmission electron microscope (TEM). The characterization results suggest that the as-prepared sample is composed of square-like nanoplates with uneven surface. Formaldehyde vapor is utilized as the target gas to investigate gas sensing properties of the synthesized novel nanoplates. The testing results indicate that the as-fabricated gas sensor exhibit high gas response and excellent repeatability to HCHO gas. The response value (Ra/Rg) is 24.5 towards 70 ppm HCHO gas at 350 °C. Besides, the gas sensing mechanism was described.

Sign in / Sign up

Export Citation Format

Share Document