scholarly journals Maximum Aerobic Capacity of Underground Coal Miners in India

2011 ◽  
Vol 2011 ◽  
pp. 1-6 ◽  
Author(s):  
Ratnadeep Saha ◽  
Netai Chandra Dey ◽  
Amalendu Samanta ◽  
Rajib Biswas
Keyword(s):  
Aerobic Capacity ◽  
Indirect Method ◽  
The Body ◽  
Step Test ◽  
Maximal Heart Rate ◽  
Coal Miners ◽  
Test Protocol ◽  
Working Groups ◽  
Maximum Aerobic Capacity

Miners fitness test was assessed in terms of determination of maximum aerobic capacity by an indirect method following a standard step test protocol before going down to mine by taking into consideration of heart rates (Telemetric recording) and oxygen consumption of the subjects (Oxylog-II) during exercise at different working rates. Maximal heart rate was derived as 220−age. Coal miners reported a maximum aerobic capacity within a range of 35–38.3 mL/kg/min. It also revealed that oldest miners (50–59 yrs) had a lowest maximal oxygen uptake (34.2±3.38 mL/kg/min) compared to (42.4±2.03 mL/kg/min) compared to (42.4±2.03 mL/kg/min) the youngest group (20–29 yrs). It was found to be negatively correlated with age (r=−0.55and −0.33 for younger and older groups respectively) and directly associated with the body weight of the subjects (r=0.57–0.68,P≤0.001). Carriers showed maximum cardio respiratory capacity compared to other miners. Indian minersVO2maxwas found to be lower both compared to their abroad mining counterparts and various other non-mining occupational working groups in India.

scholarly journals Maximal Heart Rate for Swimmers

Sports ◽  
2019 ◽  
Vol 7 (11) ◽  
pp. 235 ◽  
Author(s):  
Bjørn Harald Olstad ◽  
Veronica Bjørlykke ◽  
Daniela Schäfer Olstad
Keyword(s):  
Body Mass Index ◽  
Heart Rate ◽  
Step Test ◽  
Maximal Heart Rate ◽  
Test Protocol ◽  
Front Crawl ◽  
Running Training ◽  
Elite Swimmers ◽  
Rate Test ◽  
The Difference

The main purpose of this study was to identify whether a different protocol to achieve maximal heart rate should be used in sprinters when compared to middle-distance swimmers. As incorporating running training into swim training is gaining increased popularity, a secondary aim was to determine the difference in maximal heart rate between front crawl swimming and running among elite swimmers. Twelve elite swimmers (4 female and 8 male, 7 sprinters and 5 middle-distance, age 18.8 years and body mass index 22.9 kg/m2) swam three different maximal heart rate protocols using a 50 m, 100 m and 200 m step-test protocol followed by a maximal heart rate test in running. There were no differences in maximal heart rate between sprinters and middle-distance swimmers in each of the swimming protocols or between land and water (all p ≥ 0.05). There were no significant differences in maximal heart rate beats-per-minute (bpm) between the 200 m (mean ± SD; 192.0 ± 6.9 bpm), 100 m (190.8 ± 8.3 bpm) or 50 m protocol (191.9 ± 8.4 bpm). Maximal heart rate was 6.7 ± 5.3 bpm lower for swimming compared to running (199.9 ± 8.9 bpm for running; p = 0.015). We conclude that all reported step-test protocols were suitable for achieving maximal heart rate during front crawl swimming and suggest that no separate protocol is needed for swimmers specialized on sprint or middle-distance. Further, we suggest conducting sport-specific maximal heart rate tests for different sports that are targeted to improve the aerobic capacity among the elite swimmers of today.

scholarly journals Estimation of the aerobic capacity by step test in the workers of a tile factory in Yazd in 2017

2020 ◽  
Author(s):  
M Bahrami ◽  
F Qanai ◽  
J Mirmohammadi ◽  
M Askarishahi ◽  
A Barkhordari ◽  
...  
Keyword(s):  
Aerobic Capacity ◽  
Significant Relationship ◽  
Work Capacity ◽  
Cross Sectional Study ◽  
Step Test ◽  
Physical Work ◽  
Physical Work Capacity ◽  
Cross Sectional ◽  
Maximum Aerobic Capacity ◽  
Ceramic Workers

Introduction: Estimation of the maximum aerobic capacity to find a physiological fitness between worker and the work is of great importance. The purpose of this study was to estimate the highest aerobic capacity and physical work capacity of tile and ceramic workers. Materials and methods: In this cross-sectional study, 90 workers were randomly selected from tile and ceramic workers in Yazd. A questionnaire consisting of two parts was used as data collection tool. The first part of the questionnaire included demographic characteristics completed by the interview. In the second part, parameters including height, weight, BMI and heart rate were inserted in the questionnaire. The Queen step test was used to measure the maximum aerobic capacity. The data were analyzed by SPSS software using Mann-Whitney and Kruskal-Wallis tests and Spearman,s test. Results: The maximum aerobic capacity in tile and ceramic workers was estimated to be 3.60±.0.03 L/m. The results showed that aerobic capacity was significantly correlated with weight and body mass index. Also, there was no significant relationship between aerobic capacity, smoking and exercise, and education, but there was a significant relationship between gob title and aerobic capacity. Conclusion: Weight, BMI and type of occupation affect the aerobic capacity of workers.

scholarly journals Estimating the Maximum Aerobic Capacity of Fire Fighters Using The Step Test; A Case Study With Height Adjustable Steps

2016 ◽  
Vol 4 (2) ◽  
pp. 60-66 ◽  
Author(s):  
sajjad farhadi ◽  
ghasem hesam ◽  
zahra moradpour ◽  
malek abazari ◽  
yousef babayi mesdaraghi ◽  
...  
Keyword(s):  
Aerobic Capacity ◽  
Step Test ◽  
Fire Fighters ◽  
Maximum Aerobic Capacity

scholarly journals Comparison of Blood Cholesterol Profiles Before and After The Measurements of Maximum Aerobic Capacity (VO2max)

2016 ◽  
Vol 1 (1) ◽  
Author(s):  
AR SHADIQIN
Keyword(s):  
Total Cholesterol ◽  
Aerobic Capacity ◽  
Low Density Lipoprotein ◽  
Density Lipoprotein ◽  
Work Capacity ◽  
The Body ◽  
Blood Cholesterol ◽  
Oxygen Capacity ◽  
Before And After ◽  
Maximum Aerobic Capacity

This study is aimed to compare the blood cholesterol profile, before and after the measurement of maximum aerobic capacity (VO2max) in the students of Jurusan Pendidikan Olahraga dan Kesehatan (JPOK) pada Fakultas Keguruan dan Ilmu Pendidikan (FKIP) Universitas Lambung Mangkurat Banjarmasin.Variables in this study consist of lipid profiles, including total cholesterol, high density lipoprotein (HDL), low density lipoprotein (LDL), triglyceride (TG) and Maximum Aerobic Capacity (VO2max). The concept of VO2max according to Kent(1994:268): “maximum oxygen volume consumed per minute to show total work capacity, or volume per minute relative to body weight (ml/kg.min)”. Operationally, VO2max referred in this study is the maximum volume of oxygen that can be consumed per minute, as measured at progressive run (Bleep Test).<br />The method used in this study is pre-experimental with one group pretest-posttest design. This design implies that a group of subjects are treated for a specific period and the measurements are taken both pre and post. The results: There are changes in blood cholesterol profile after the measurement of maximum oxygen capacity (VO2max), shown by significant decrease of total cholesterol variable, increased HDL, and decreased LDL. Changes in triglyceridevariable showed no significant decrease despite the statistic differences. Specific HDL sub-class increasing after exercise is a constructive lipoprotein sub-class whereas LDL is destructive lipoproteins sub-class that might damage the body. Therefore, an increase in HDL and decrease in LDL found in this study appears to be advantageous and consequently might alter the risk of coronary heart disease.

Gender determination of caucasoid hair using image analysis

1993 ◽  
Vol 51 ◽  
pp. 216-217
Author(s):  
T.B. Ball ◽  
W.M. Hess
Keyword(s):  
Image Analysis ◽  
Cross Sections ◽  
Scalp Hair ◽  
The Body ◽  
Equivalent Diameter ◽  
Cross Sectional ◽  
Hair Samples ◽  
Length Width ◽  
Morphological Differences

It has been demonstrated that cross sections of bundles of hair can be effectively studied using image analysis. These studies can help to elucidate morphological differences of hair from one region of the body to another. The purpose of the present investigation was to use image analysis to determine whether morphological differences could be demonstrated between male and female human Caucasian terminal scalp hair.Hair samples were taken from the back of the head from 18 caucasoid males and 13 caucasoid females (Figs. 1-2). Bundles of 50 hairs were processed for cross-sectional examination and then analyzed using Prism Image Analysis software on a Macintosh llci computer. Twenty morphological parameters of size and shape were evaluated for each hair cross-section. The size parameters evaluated were area, convex area, perimeter, convex perimeter, length, breadth, fiber length, width, equivalent diameter, and inscribed radius. The shape parameters considered were formfactor, roundness, convexity, solidity, compactness, aspect ratio, elongation, curl, and fractal dimension.

Experience in the use of double broncholytic therapy in occupational practice

2019 ◽  
pp. 303-307
Author(s):  
Elena A. Beigel ◽  
Natalya G. Kuptsova ◽  
Elena V. Katamanova ◽  
Oksana V. Ushakova ◽  
Oleg L. Lakhman
Keyword(s):  
Quality Of Life ◽  
Personal Data ◽  
The Body ◽  
Step Test ◽  
Aluminum Production ◽  
Chronic Obstructive ◽  
Body Plethysmography ◽  
Occupational Copd ◽  
The Impact

Introduction. Occupational chronic obstructive pulmonary disease (COPD) is one of the leading nosological forms of occupational respiratory disease. Numerous studies have shown high effectiveness of the combination of indacaterol/glycopyrronium (Ultibro®breezhaler®) on the impact on clinical and functional indicators in the treatment of COPD in General practice.The aim of the investigation the case of occupational COPD with the analysis of the dynamics of functional indicators, tolerance to physical load and evaluation of the quality of life of workers engaged in aluminum production by using combination of indacaterol/glycopyrronium.Materials and methods. The random sampling method included 20 men, workers of aluminum production, with the established diagnosis of professional COPD at the age of 40 to 60 years. The survey was conducted (Borg scale, medical Research Council scale (mMRC) and COPD Assessment Test (CAT). Functional methods of studies were conducted: spirometry, body plethysmography, electrocardiography (ECG) and the six-minute stepper test (6-MST).Results. Against the background of 8 weeks of therapy, the volume of forced exhalation for 1 minute (FEV1) increased by 14.7% and amounted to 67.90% of the due values, the forced vital capacity of the lungs (FVC) increased by 11.3% and amounted to 76.95% of the due. According to the body plethysmography (BPG) is set to decrease in residual lung volume on average by 13.4% and static hyperinflation, confirmed by the decrease in functional residual volume (FRV) of 18.8%. During the study period increased physical activity of patients. The average difference between the distance traveled in the six-minute step test before and after treatment was 58.8 m. The analysis of personal data showed that the quality of life of patients improved, the total score in the questionnaire CAT at the beginning of the study was 16.9 points, and after 8 weeks decreased by 63% and amounted to 10.7 points.Conclusions: The Results indicate a positive effect of combination therapy with indacaterol/glycopyrronium on the course and progression of occupational COPD.

Determination of Lead Content in Red Colored Lipsticks from Mandalay Market by Flame Atomic Absorption Spectrophotometer

2018 ◽  
Vol 30 (3) ◽  
pp. 167-173
Keyword(s):  
Sampling Procedure ◽  
The Body ◽  
Lead Content ◽  
Social Psychological ◽  
Allowable Limit ◽  
Flame Atomic Absorption ◽  
Therapeutic Benefits ◽  
Flame Atomic Absorption Spectrophotometer ◽  
Exposure Levels

Red colored lipstick is the most widely used cosmetic product. Although lipstick gives a lot of social, psychological and therapeutic benefits, it may harm the consumers. Because some lipsticks contain a considerable amount of heavy metal especially lead. Lead is being used in lipstick mainly for the pigments required to obtain needed colors. Lead accumulates in the body over time and lead-containing lipstick applied several times a day, every day, combined with lead in water and other sources, could add up to significant exposure levels. Therefore, this study was aimed to determine lead content in red colored lipsticks from market. This study was laboratorybased, analytical study by using 25 lipstick samples. Red colored lipsticks were bought from Mandalay Market by random sampling procedure and they were completely coded to avoid the bias. Then, lead content in coded samples was determined by Flame AAS according to International Conference on Harmonization (ICH) guideline. Lead contents of 88% of the lipsticks samples were more than specified limit (20 ppm) of Food and Drug Administration, United States. All of them, lead content was highest in counterfeit lipsticks group. Among the tested lipstick samples, lipstick with lowest lead content was LE-RL 01 (15.74 ppm) and the lipstick with highest lead content was CF-RL 01(60.09 ppm). In conclusion, lead contents of red colored lipsticks (22 out of 25) from market samples were higher than allowable limit (20 ppm).

Fast Method for the Determination of Residual Solvents in Radiopharmaceutical Products

2017 ◽  
Vol 68 (4) ◽  
pp. 666-670 ◽  
Author(s):  
Mirela Mihon ◽  
Catalin Stelian Tuta ◽  
Alina Catrinel Ion ◽  
Dana Niculae ◽  
Vasile Lavric
Keyword(s):  
Gas Chromatography ◽  
Control Method ◽  
Limit Of Detection ◽  
The Body ◽  
Biologically Active ◽  
Injection Technique ◽  
Fast Method ◽  
Residual Solvent ◽  
Residual Solvents

The aim of this work was the development and validation of a fast analytical method to determine the residual solvents content in radiopharmaceuticals such as: 18F-Fluorodeoxyglucose (18F-FDG), 18F-Fluoroestradiol (18F-FES), 18F-Fluorothymidine (18F-FLT),18F-Fluoromisonidazole (18F-FMISO). Radiopharmaceuticals are radioactive preparations for medical purposes used in nuclear medicine as tracers in diagnostic imaging and treatment of certain diseases. Positron Emission Tomography (PET) is a medical imaging technique that consists in introducing into the body of a small amount of a biologically active chemical compound labelled with a short lived positron-emitting radioisotope (18F, 11C, 68Ga). Residual solvents are critical impurities in radiopharmaceuticals that can affect labelling, stability and physicochemical properties of drugs. Therefore, the determination of these solvents is essential for quality control of radiopharmaceuticals. Validation of the control method for residual solvents by gas chromatography is referred by the European Pharmacopoeia using a special injection technique (head space). The parameters of the method, which comply with International Conference on Harmonization guidelines, are: accuracy, precision, linearity, limit of detection, limit of quantification and robustness. The proposed method (direct gas chromatography injection) proved to be linear, precise, accurate and robust. Good linearity was achieved for all the solvents and correlation coefficients (R2) for each residual solvent were found more than 0.99.

Sign in / Sign up

Export Citation Format

Share Document