scholarly journals Experiment and Simulation Investigation on the Tensile Behavior of Composite Laminate with Stitching Reinforcement

2011 ◽  
Vol 2011 ◽  
pp. 1-10
Author(s):  
Yi Wang ◽  
Nai Xian Hou ◽  
Zhu Feng Yue
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Significant Influence ◽  
Composite Structures ◽  
Composite Laminate ◽  
Tensile Load ◽  
Tensile Behavior ◽  
The Finite Element Method ◽  
Tensile Process ◽  
Simulation Results

The experiments and finite element simulations of composite laminate with stitching are carried out. Firstly, the monotonous tensile experiments with and without stitching are conducted to investigate the influence of stitch reinforcement on the composite laminate. Secondly, the finite element method (FEM) is employed to simulate the tensile process of specimens, and the link element is introduced to simulate the stitching. The experiment results shows that the stitching has little influence on the damage load under monotonous tensile load, while there is a significant influence on the changing of strain. The FEM results are consistent with the experiment results, which means that the link element can be used to study the stitching of the composite laminate. The simulation results also show that the distributions of strain are changed obviously due to the existence of the stitching. Research results have a significant role on the design of the composite structures with and without stitching.

Research on Mechanical Properties of FML

2011 ◽  
Vol 335-336 ◽  
pp. 281-284 ◽  
Author(s):  
Chang Hao Wang ◽  
Jing Tian ◽  
Xiang Lu
Keyword(s):  
Mechanical Properties ◽  
Finite Element Method ◽  
Finite Element ◽  
Composite Layer ◽  
Tensile Load ◽  
Element Model ◽  
Tensile Behavior ◽  
Aluminum Layer ◽  
The Finite Element Method ◽  
The Stability

According to the finite element method, this article has established the FML’s finite element model. By comparing to the test data and studying of the tensile behavior of FML, it has verified valid of the model. When the aluminum layer yields under the tensile load, the composite layer has the most tensile load. And the model has been developed to predict the stability influenced by the rib’s height.

scholarly journals Analyses of Composite Structures Behaviour with Embedded Bragg Grating Sensors

2006 ◽  
Vol 514-516 ◽  
pp. 614-618
Author(s):  
Carlos A. Ramos ◽  
José Luís Esteves ◽  
Rui A. Silva ◽  
António Torres Marques
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Numerical Analysis ◽  
Health Monitoring ◽  
Composite Structures ◽  
Composite Laminate ◽  
Carbon Composite ◽  
Bragg Grating ◽  
Fibre Bragg Grating ◽  
The Finite Element Method

Structural health monitoring of composite structures may be accomplished by measuring strains with embedded optical fibre sensors. In this paper, we present the performance of Bragg grating sensors, which are embedded into a carbon composite laminate and them bonded to the structure in analyse. The paper will briefly discuss the results and compare them with a free fibre Bragg grating bonded in the surface of the carbon composite laminate, with existing electrical strain gauge installation and with a numerical analysis by the finite element method.

Dynamic tensile process of blended fabric using finite element method

2020 ◽  
Vol 32 (5) ◽  
pp. 707-724
Author(s):  
Xuzhong Su ◽  
Xinjin Liu
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Experimental Testing ◽  
Woven Fabrics ◽  
Weft Yarn ◽  
Tensile Fracture ◽  
Content Type ◽  
Tensile Process ◽  
Simulation Results ◽  
Element Method

PurposeTensile property is one basic mechanics performance of the fabric. In general, not only the tensile values of the fabric are needed, but also the dynamic changing process under the tension is also needed. However, the dynamic tensile process cannot be included in the common testing methods by using the instruments after fabric weaving.Design/methodology/approachBy choosing the weft yarn and warp yarn in the fabric as the minimum modeling unit, 1:1 finite element model of the whole woven fabrics was built by using AutoCAD software according to the measured geometric parameters of the fabrics and mechanical parameters of yarns. Then, the fabric dynamic tensile process was simulated by using the ANSYS software. The stress–strain curve along the warp direction and shrinkage rate curve along the weft direction of the fabrics were simulated. Meanwhile, simulation results were verified by comparing to the testing results.FindingsIt is shown that there are four stages during the fabric tensile fracture process along the warp direction under the tension. The first stage is fabric elastic deformation. The second stage is fabric yield deformation, and the change rate of stress begins to slow down. The third stage is fiber breaking, and the change of stress fluctuates since the breaking time of the fibers is different. The fourth stage is fabric breaking.Originality/valueIn this paper, the dynamic tensile process of blended woven fabrics was studied by using finite element method. Although there are differences between the simulation results and experimental testing results, the overall tendency of simulation results is the same as the experimental testing results.

The Numerical Simulation of Effective Elastic Response for WC-Co Cemented Carbide

2015 ◽  
Vol 1096 ◽  
pp. 417-421
Author(s):  
Pei Luan Li ◽  
Zi Qian Huang
Keyword(s):  
Numerical Simulation ◽  
Finite Element Method ◽  
Finite Element ◽  
Theoretical Model ◽  
Material Properties ◽  
Cemented Carbide ◽  
Elastic Response ◽  
The Finite Element Method ◽  
Simulation Results ◽  
Element Method

By the use of finite element method, this paper predicts the effects of the shapes of reinforcements with different ductility (Co) on the effective elastic response for WC-Co cemented carbide. This paper conducts a comparative study on the material properties obtained through theoretical model, numerical simulation and experimental observations. Simulation results indicate that the finite element method is more sophisticated than the theoretical prediction.

Research and Simulation on Drawing Force of the Tripod Type Universal Coupling

2012 ◽  
Vol 482-484 ◽  
pp. 792-795
Author(s):  
Ye Qiang Lu ◽  
Wen Feng Wei ◽  
Yi Long Zhang
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Theoretical Analysis ◽  
Cross Section ◽  
The Finite Element Method ◽  
Drawing Force ◽  
Simulation Results ◽  
Universal Coupling ◽  
Castigliano’S Theorem ◽  
Static Simulation

Analyzing the strain expression referring to Castigliano’s Theorem after analysis of the tripod type universal coupling under drawing force comes to the simplified mode of tripod type universal coupling. And with the help of simplified mode, it concludes that the minimum strain occurs when the radius of cross-section of the circlip equals to the depth of groove. After setting material attributes, boundary conditions, contacts of the tripod type universal coupling, and static simulation with the finite element method in SolidWorks, the strain of the universal couplings is carried out. Theoretical analysis and simulation results show that when the radius of cross-section of the coupling equals to the depth of groove, the strain is minimum.

Simulation on Driving Performance of the Vehicle Based on Modeling Tire

2011 ◽  
Vol 66-68 ◽  
pp. 373-377
Author(s):  
Yue Ying Zhu ◽  
Gui Fan Zhao ◽  
You Shan Wang ◽  
Li Liang Yin
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Dynamic Simulation ◽  
Driving Performance ◽  
New Method ◽  
The Finite Element Method ◽  
Performance Simulation ◽  
Radial Tire ◽  
Simulation Results ◽  
Dynamics Models

The finite element method was used to establish model of radial tire and analysis the characteristics of tire in driving state to improve the accuracy of simulation on driving performance of off-road vehicle. The dynamics models of the vehicle and its subsystem are designed to provide an off-line dynamic simulation for vehicle driving performance. Simulation and analysis for the vehicle selected previously are made, and the simulation results are compared and analyzed in detail to prove the effectiveness of the new method.

Finite Element Method Application for the Determination of Hardness for Magnesium Alloys

2018 ◽  
Vol 69 (2) ◽  
pp. 324-327
Author(s):  
Agata Sliwa ◽  
Marek Sroka ◽  
Katarzyna Bloch ◽  
Ioan Gabriel Sandu ◽  
Mohd Mustafa Al Bakri Abdullah ◽  
...  
Keyword(s):  
Finite Element Method ◽  
Computer Simulation ◽  
Finite Element ◽  
Magnesium Alloys ◽  
Optimal Solution ◽  
The Finite Element Method ◽  
Simulation Results ◽  
Hardness Values ◽  
Element Method

A numerical model was made to establish the casting hardness for the magnesium alloys MCMgAl12Zn1, MCMgAl6Zn1, MCMgAl3Zn1 and MCMgAl9Zn1. Computer simulation of hardness was performed using the finite element method in ANSYS environment, and the hardness values were obtained by experiments based on the Rockwell method. The showed model fulfils the initial criteria, which provides with the basis for the assumption about its utility in establishing the casting hardness of the magnesium alloys MCMgAl12Zn1, MCMgAl6Zn1, MCMgAl3Zn1 and MCMgAl9Zn., using the finite element method within the framework of the ANSYS program. There is the correlation of the computer simulation results with the experimental outcomes. Nowadays the computer simulation is very well known, and it is based on the finite element method, what it makes possible to better comprehend the autonomy between the process parameters and selected optimal solution. The chance of applying faster and faster calculation machines and the formation of much software enables creating the more accurate models and more the adequate ones to reality.

Sign in / Sign up

Export Citation Format

Share Document