scholarly journals A Rational Self-Sacrificing Template Route toLiMn2O4Nanotubes and Nanowires

2011 ◽  
Vol 2011 ◽  
pp. 1-5
Author(s):  
Baojun Yang ◽  
Xinsong Yuan ◽  
Duoli Chai
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
High Resolution ◽  
Spinel Phase ◽  
Synthesis Method ◽  
Molten Salt Synthesis ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

Single-crystallineLiMn2O4nanotubes and nanowires have been synthesized via a low-temperature molten salt synthesis method, using the preparedβ-MnO2nanotubes andα-MnO2nanowires as the precursors and self-sacrificing template. The materials were investigated by a variety of techniques, including X-ray powder diffraction (XRD), transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), and high-resolution transmission electron microscopy (HRTEM). The results indicate that the preparedLiMn2O4nanotube and nanowire samples are both spinel phase, have lengths up to several micrometers and diameters of hundreds and tens of nanometers, respectively.

Hydrothermal Synthesis and Characterization of BiFeO3 Polyhedral Crystallites

2012 ◽  
Vol 174-177 ◽  
pp. 508-511
Author(s):  
Lin Lin Yang ◽  
Yong Gang Wang ◽  
Yu Jiang Wang ◽  
Xiao Feng Wang
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

BiFeO3 polyhedrons had been successfully synthesized via a hydrothermal method. The as-prepared products were characterized by power X-ray diffraction (XRD) pattern, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The possible mechanisms for the formation of BiFeO3 polyhedrons were discussed. Though comparison experiments, it was found that the kind of precursor played a key role on the morphology control of BiFeO3 crystals.

Influence of Salt Aid on Combustion Synthesis of Nanocrystalline CeO2 Powders

2011 ◽  
Vol 412 ◽  
pp. 5-8 ◽  
Author(s):  
Ying Zhang ◽  
Ai Chen ◽  
Hai Rong Wang ◽  
Ze Song Li ◽  
Ying Ping Shen
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Combustion Process ◽  
X Ray Diffraction ◽  
X Ray ◽  
Particle Characteristics ◽  
Transmission Electron ◽  
Nanocrystalline Ceria ◽  
Scanning Electron

The present article reports the results of studies related to the synthesis of nanocrystalline ceria powder by combustion process using salt combustion aid. Cerium nitrate as oxidant and urea as fuel were used as reagents, Sodium Chloride was compared as combustion aid. The phase analysis and particle size were compared. The product was characterized by X-ray diffraction, Scanning electron microscopy and Transmission electron microscopy. The results showed that employment of starting fuel with combustion aid resulted in synthesizing nanocrystalline ceria powder with fine agglomerates. By using combustion aid, the energetics of the combustion reaction and particle characteristics have been changed.

Analyse des Stuckgipses der Abtei Villers / Analysis of Stucco from the Abbey of Villers

1997 ◽  
Vol 3 (4) ◽  
pp. 381-396
Author(s):  
S. Chandra ◽  
D. Van Gemert
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Chemical Analysis ◽  
Electron Spectroscopy ◽  
Natural Polymer ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

Abstract Interior plaster from the Abbot's Palace of the Abbey of Villers-la-Ville, Brabant Wallon province, Belgium has been investigated. It is done by using chemical analysis, x-ray diffraction analysis, scanning electron microscopy, energy dispersive electron spectroscopy, and transmission electron microscopy. It is found that the rendering was made with lime rich mortar and animal hairs. The sand used was very fine and the hairs were very short. The solid constituents and the hairs were uniformly dispersed, which could have been obtained by the addition of some other natural polymer, containing protein.

Radiation – induced preparation of polyaniline/poly vinyl alcohol nanocomposites and their properties

2019 ◽  
Vol 107 (8) ◽  
pp. 725-735
Author(s):  
Hoda H. Saleh ◽  
Rehab Sokary ◽  
Zakaria I. Ali
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
High Resolution ◽  
Vinyl Alcohol ◽  
Oxidative Polymerization ◽  
Nanocomposite Films ◽  
Poly Vinyl Alcohol ◽  
Transmission Electron ◽  
Scanning Electron

Abstract Polyaniline (PANI) nanoparticles and PANI/poly vinyl alcohol (PVA) nanocomposite films were synthesized by the oxidative polymerization of aniline and ammonium peroxodisulfate (APS), as an oxidizing agent in aqueous medium. The PANI/PVA nanocomposite films were exposed to γ-irradiation after oxidative polymerization. Synthesized polyaniline (PANI) nanoparticles and PANI/PVA nanocomposite films were characterized by attenuated total reflectance infrared spectroscopy (FTIR-ATR), X-ray diffraction, high resolution scanning electron microscopy, (HRSEM) high resolution transmission electron microscopy, (HRTEM) and UV-VIS absorption spectroscopy. Energy band gap of PANI nanofibers was determined from Tauc’s plots which equal 4.2 eV. Scanning electron microscopy images show that chemically synthesized of polyaniline has nanofibers structure and irradiated PANI/PVA nanocomposite have a mixture of nanorod and nanosphere structures. The transmission electron microscopy show that chemically synthesized of polyaniline has average length in the range 34 ± 10 nm with less wide distribution, where as the irradiated PANI/PVA nanocomposite has coreshell structure.

Controlled Synthesize of BaTiO3 Nanoparticles and BaCO3 Nanowires through the Reverse Micelle System

2009 ◽  
Vol 66 ◽  
pp. 171-174
Author(s):  
Zhao Deng ◽  
Ying Dai ◽  
Wen Chen
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Phase Composition ◽  
Reverse Micelle ◽  
X Ray ◽  
Transmission Electron ◽  
Batio3 Nanoparticles ◽  
Scanning Electron ◽  
Micelle System

Single-crystalline BaTiO3 nanoparticles and BaCO3 nanowires were synthesized respectively through the use of a reverse micelle as a medium in the same Oleic acid/n-octane/H2O system, by changing the H2O2 dosage. Both the phase composition and the morphology can be controled. The samples derived were characterized with X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and high-resolution transmission electron microscopy (HRTEM). The formation mechanism has been fully discussed.

Study of Hydrothermal Synthesis of Ce0.67Zr0.33O2 Nanorods and Catalytic Property to CO

2011 ◽  
Vol 347-353 ◽  
pp. 615-620
Author(s):  
Ying Jia ◽  
Tian Tian Liu ◽  
Cheng Luo
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Catalytic Oxidation ◽  
Zirconium Oxychloride ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Three Way Catalyst ◽  
Scanning Electron

Ce0.67Zr0.33O2 (CZ) nanorods are successfully synthesized by glycol-assisted hydrothermal method using zirconium oxychloride, cerium nitrate and urea, with the presence of sodium hypochlorite. The products are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Raman spectra. The catalytic oxidation characters about Pd/CZ three-way catalyst (TWC) prepared with different loads of Pd are also investigated. The results show that the as-prepared Pd/CZ has excellent catalytic oxidation character to CO.

Synthesis of ZnO with Different Morphology and its Photocatalytic Property

2011 ◽  
Vol 110-116 ◽  
pp. 547-552 ◽  
Author(s):  
Yu Xin Wang ◽  
Jing Xu ◽  
Xing Guo Cheng ◽  
Hong Fang Xu ◽  
Li Jun Liu
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Photocatalytic Property ◽  
Zno Nanostructures ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Zno Nanomaterials ◽  
Scanning Electron

ZnO nanostructures with different morphology have been successfully fabricated by a simple relative low temperature approach at 90 °C for 5 h without surfactant assistance. These structures can be easily tailed using varied concentrations of sodium hydroxide (NaOH) and different amounts of the hydrazine hydrate (N2H4·H2O). X-ray diffraction (XRD) result proves the formation of ZnO with wurtzite structure. Microstructure as revealed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) indicates that the rod-like and chrysanthemum-like ZnO nanostructures contain many radial nanorods, which grow along the [0001] direction. Furthermore, the as-prepared ZnO nanomaterials exhibit high activity on the photo-catalytic degradation of typical persistent organic pollutants (POPs), indicating that they are promising as semiconductor photo-catalysts.

HRTEM Investigation of Precipitates in Al-Zn-In-Mg-Ti-Ce Anode Alloy

2011 ◽  
Vol 189-193 ◽  
pp. 1036-1039
Author(s):  
Jing Ling Ma ◽  
Jiu Ba Wen ◽  
Yan Fu Yan
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
High Resolution ◽  
Electron Diffraction ◽  
Hexagonal Structure ◽  
Orientation Relation ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Scanning Electron

The precipitates of Al-5Zn-0.02In-1Mg-0.05Ti-0.5Ce (wt %) anode alloy were studied by scanning electron microscopy, X-ray microanalysis, high resolution transmission electron microscopy and selected area electron diffraction analyses in the present work. The results show that the alloy mainly contains hexagonal structure MgZn2 and tetragonal structure Al2CeZn2 precipitates. From high resolution transmission electron microscopy and selected area electron diffraction, aluminium, Al2CeZn2 and MgZn2 phases have [0 1 -1]Al|| [1 -10]Al2CeZn2|| [-1 1 0 1]MgZn2orientation relation, and Al2CeZn2 and MgZn2 phases have the [0 2 -1]Al2CeZn2|| [0 1 -10]MgZn2orientation relation.

scholarly journals Mitochondria of Human Adrenal Cortex Have Tubular Cristae with Bulbous Tips

2003 ◽  
Vol 88 (4) ◽  
pp. 1903-1906 ◽  
Author(s):  
Alessandro Riva ◽  
Felice Loffredo ◽  
Alessandro Uccheddu ◽  
Francesca Testa Riva ◽  
Bernard Tandler
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
High Resolution ◽  
Adrenal Cortex ◽  
Thin Sections ◽  
Transmission Electron ◽  
Soluble Material ◽  
Bulbous Tip ◽  
Scanning Electron

By taking advantage of a modified osmium maceration technique, we have been able to examine by high resolution scanning electron microscopy (HRSEM) the interior of human adrenocortical mitochondria from which all soluble material has been extracted. The so-called vesicles apparent in thin sections examined by transmission electron microscopy actually are finger-like cristae as determined by HRSEM. These digitiform cristae have a segmented appearance and a bulbous tip. The segmented form of the cristae may have important metabolic implications.

Sign in / Sign up

Export Citation Format

Share Document