scholarly journals Removal of Erichrome Black T from Synthetic Wastewater by Cotton Waste

2011 ◽  
Vol 8 (2) ◽  
pp. 803-808 ◽  
Author(s):  
U. V. Ladhe ◽  
S. K. Wankhede ◽  
V. T. Patil ◽  
P. R. Patil
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Chemical Kinetics ◽  
Contact Time ◽  
Ph Effect ◽  
Physicochemical Characterization ◽  
Synthetic Wastewater ◽  
Batch Adsorption ◽  
Experimental Parameters ◽  
Cotton Waste

Adsorptions of Erichrome Black T dye in aqueous solution on cotton stem activated carbon have been studied as a function of contact time, concentration and pH. Effect of various experimental parameters has been investigated at 39±1°C under batch adsorption technique. The result shows that cotton stem activated carbon adsorbs dye to a sufficient extent. The physicochemical characterization and chemical kinetics was also examined for the same dye. The overall result shows that it can be fruitfully used for the removal of dye from wastewaters.

scholarly journals Kinetic, Equilibrium and Thermodynamic Studies on Removal of Cu(II) and Pb(II) by Activated Carbon Prepared from Macro-Algae (Kappaphycus alvarezii)

2019 ◽  
Vol 31 (6) ◽  
pp. 1343-1348
Author(s):  
K.V. SATHASIVAM ◽  
N.K. FULORIA ◽  
S. FULORIA ◽  
P.J. DARSHENEE ◽  
R. XAVIER ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Contact Time ◽  
Kappaphycus Alvarezii ◽  
Chemical Activation ◽  
Freundlich Isotherm ◽  
Experimental Parameters ◽  
Equilibrium Data ◽  
Kinetic Equilibrium ◽  
Macro Algae

Present study was intended to explore the biosorption of Cu(II) and Pb(II) ions in aqueous solution using activated carbon biosynthesized from macro-algae Kappaphycus alvarezii under different experimental parameters. Activated carbon was produced via zinc chloride chemical activation method. The effect of parameters such as pH, temperature over biosorption, amount of adsorbents, initial Cu(II) and Pb(II) aqueous concentration, and contact time were studies. The pH 4.0 for adsorption of Cu(II) and Pb(II), and metal ions uptake contact time of 60 min were considered as optimum. Equilibrium data of biosorption were analyzed by models of Langmuir and Freundlich isotherm at different initial Cu(II) and Pb(II) aqueous solutions concentration. Fruendlich adsorption isotherm model fitted well into biosorption data with a regression value of 0.9986. Thermodynamic parameters such as change in change of enthalpy (ΔHº), change of entropy (ΔSº) and Gibbs free energy (ΔGº) were also determined.

scholarly journals Removal of crystal violate dye from aqueous solution by adsorption on mixture of activated carbon: A kinetic & equilibrium study

2015 ◽  
Vol 11 (9) ◽  
pp. 3876-3887
Author(s):  
Prakash Bhila Wagh ◽  
V.S Shrivastava ◽  
V.S Shrivastava
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Contact Time ◽  
Second Order ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Equilibrium Study ◽  
Pseudo Second Order ◽  
Percentage Removal ◽  
Adsorbent Dose

 The kinetics and equilibrium study of crystal violate dye adsorption on mixture of activated carbon (PWCAC) and (CSAC) was studied. The use of low cost ecofriendly adsorbent has been investigated as an ideal alternative to the current expensive methods of removing of dye from aqueous solution. This study was done by batch adsorption techniques. The quantitative adsorption kinetic and equilibrium parameter for crystal violate dye were studied using uv-visible adsorption spectroscopy. The effect of initial dye concentration, pH,adsorbent dose, temperature, particle size were determined to find the optimal condition for adsorption. The percentage removal of dye was found to be most effective at pH10and contact time 120 min and at an adsorbent dose 4 g/L of dye. The study indicates that’s, the percentage removal of dye increases with increasing initial dye concentration, adsorption dose and contact time and attains equilibrium at optimum conditions.The equilibrium study of adsorption of crystal violate dye on to mixture of activated carbon was investigated using pseudo first order and pseudo second order kinetic models. The adsorption kinetics was found to follow pseudo second order kinetic model. The equilibrium adsorption data of crystal violate dye on PWCAC and CSAC mixture was analyzed by Langmuir and Freundlich adsorption model. The results show that the Langmuir model provides the best correlation.

scholarly journals Experimental and computational studies on activated Bambara groundnut (Vigna subterranean) hulls for the adsorptive removal of herbicides from aqueous solution

2021 ◽  
Vol 45 (1) ◽  
Author(s):  
Thomas Aondofa Nyijime ◽  
Abdullahi Muhammad Ayuba ◽  
Habibat Faith Chahul
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Quantum Chemical ◽  
Contact Time ◽  
Adsorption Process ◽  
Bambara Groundnut ◽  
Batch Adsorption ◽  
Computational Studies ◽  
Initial Concentration ◽  
Equilibrium Data

Abstract Background The excessive usage of herbicides to control herbs by farmers has become an issue of interest to the environmentalist due to the threat posed by such act to the ecosystem, and therefore, there is the need to curb such practices. The efficiency of Bambara groundnut shell for the removal of pendimethalin (PE) and paraquat dichloride (PQ) herbicides from aqueous solution was established in this work. The activated carbon was prepared via chemical activation method using trioxonitrate (v) acid by determining its void volume, moisture content, bulk density and Fourier transform infrared (FTIR) and scanning electron microscopy (SEM) methods. Batch adsorption techniques were set to optimize the adsorption parameters such as solution pH, adsorbate concentration, contact time, adsorbent dosage and temperature in order to depict the best optimal conditions for the adsorption process. The adsorption process was examined in terms of its equilibrium data, kinetics, thermodynamics involved in the adsorption process as well as computational quantum chemical parameters evaluation. Results The batch adsorption experiments revealed that the amounts of PE and PQ adsorbed were found to vary with the contact time, adsorbent dosage, pH and initial concentration. The adsorption of PE and PQ decreased with increasing adsorbent dose but increases with increasing initial concentration of the PE and PQ solution. Isotherm studies revealed that the equilibrium data fitted to both Langmuir and Freundlich model with R-squared values of 0.976, 0.993 and 0.909, 0.978 for PE and PQ, respectively, which implied that Langmuir isotherm had a better fit. This was also found to be an indication that the uptake of PE and PQ by ACBGNS occurred through monolayer adsorption on identical homogenous sites. Also, kinetic modeling results obtained showed that the pseudo-second-order model explained the adsorption kinetics of PE and PQ by ACBGNS best, which meant that chemisorption was the slowest step and, thus, the rate determining step. The positive value of ΔH and the positive value of ΔG show the endothermic and spontaneous nature of adsorption of PE and PQ ACBGNS. Conclusion Batch adsorption experiment and characterization of the ACBGNS have indicated that Bambara ground nut shell can be used to produce activated carbon that can be applied effectively for adsorption of PE and PQ from an aqueous solution. Computational studies results obtained from quantum chemical analysis are consistent with the experimental results obtained from this study.

scholarly journals Removal of crystal violate dye from aqueous solution by adsorption on mixture of activated carbon: A kinetic & equilibrium study

2015 ◽  
Vol 11 (9) ◽  
pp. 3876-3887
Author(s):  
Prakash Bhila Wagh ◽  
V.S Shrivastava ◽  
V.S Shrivastava
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Contact Time ◽  
Second Order ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Equilibrium Study ◽  
Pseudo Second Order ◽  
Percentage Removal ◽  
Adsorbent Dose

 The kinetics and equilibrium study of crystal violate dye adsorption on mixture of activated carbon (PWCAC) and (CSAC) was studied. The use of low cost ecofriendly adsorbent has been investigated as an ideal alternative to the current expensive methods of removing of dye from aqueous solution. This study was done by batch adsorption techniques. The quantitative adsorption kinetic and equilibrium parameter for crystal violate dye were studied using uv-visible adsorption spectroscopy. The effect of initial dye concentration, pH,adsorbent dose, temperature, particle size were determined to find the optimal condition for adsorption. The percentage removal of dye was found to be most effective at pH10and contact time 120 min and at an adsorbent dose 4 g/L of dye. The study indicates that’s, the percentage removal of dye increases with increasing initial dye concentration, adsorption dose and contact time and attains equilibrium at optimum conditions.The equilibrium study of adsorption of crystal violate dye on to mixture of activated carbon was investigated using pseudo first order and pseudo second order kinetic models. The adsorption kinetics was found to follow pseudo second order kinetic model. The equilibrium adsorption data of crystal violate dye on PWCAC and CSAC mixture was analyzed by Langmuir and Freundlich adsorption model. The results show that the Langmuir model provides the best correlation.

scholarly journals Comparative studies on the removal of copper (II) by Ulva fasciata activated carbon and commercially activated carbon

2012 ◽  
Vol 14 (4) ◽  
pp. 88-94 ◽  
Author(s):  
R.P. Suresh Jeyakumar ◽  
V. Chandrasekaran
Keyword(s):  
Activated Carbon ◽  
Activated Carbons ◽  
Synthetic Wastewater ◽  
Batch Adsorption ◽  
First Order ◽  
Ulva Fasciata ◽  
Adsorption Data ◽  
Pseudo Second Order ◽  
Pseudo First Order ◽  
Adsorbent Dose

Abstract In this work, the efficiency of Ulva fasciata sp. activated carbons (CCUC, SCUC and SSUC) and commercially activated carbon (CAC) were studied for the removal of Cu (II) ions from synthetic wastewater. Batch adsorption experiments were carried out as a function of pH, contact time, initial copper concentration and adsorbent dose. The percentage adsorption of copper by CCUC, SSUC, SCUC and CAC are 88.47%, 97.53%, 95.78% and 77.42% respectively. Adsorption data were fitted with the Langmuir, Freundlich and Temkin models. Two kinetic models pseudo first order and the pseudo second order were selected to interpret the adsorption data.

Granular activated carbon (GAC) adsorption in tertiary wastewater treatment: experiments and models

2003 ◽  
Vol 47 (1) ◽  
pp. 113-120 ◽  
Author(s):  
D.S. Chaudhary ◽  
S. Vigneswaran ◽  
V. Jegatheesan ◽  
H.H. Ngo ◽  
H. Moon ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Activated Carbon ◽  
Fixed Bed ◽  
Granular Activated Carbon ◽  
Developed Countries ◽  
Synthetic Wastewater ◽  
Batch Adsorption ◽  
Model Parameters ◽  
Wide Range ◽  
Gac Adsorption

Wastewater treatment has always been a major concern in the developed countries. Over the last few decades, activated carbon adsorption has gained importance as an alternative tertiary wastewater treatment and purification process. In this study, granular activated carbon (GAC) adsorption was evaluated in terms of total organic carbon (TOC) removal from low strength synthetic wastewater. This paper provides details on adsorption experiments conducted on synthetic wastewater to develop suitable adsorption isotherms. Although the inorganics used in the synthetic wastewater solution had an overall unfavourable effect on adsorption of organics, the GAC adsorption system was found to be effective in removing TOC from the wastewater. This study showed that equation of state (EOS) theory was able to fit the adsorption isotherm results more precisely than the most commonly used Freundlich isotherm. Biodegradation of the organics with time was the most crucial and important aspect of the system and it was taken into account in determining the isotherm parameters. Initial organic concentration of the wastewater was the determining factor of the model parameters, and hence the isotherm parameters were determined covering a wide range of initial organic concentrations of the wastewater. As such, the isotherm parameters derived using the EOS theory could predict the batch adsorption and fixed bed adsorption results of the multi-component system successfully. The isotherm parameters showed a significant effect on the determination of the mass transfer coefficients in batch and fixed bed systems.

scholarly journals Adsorption of Phenol from Aqueous Solution Using Activated Carbon prepared from Coconut Shell

2017 ◽  
Vol 29 (1) ◽  
pp. 9-13
Author(s):  
Masuma Sultana Ripa ◽  
Rafat Mahmood ◽  
Sabrina Khan ◽  
Easir A Khan
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Adsorption Isotherm ◽  
Iodine Number ◽  
Chemical Engineering ◽  
Coconut Shell ◽  
Physical Activation ◽  
Batch Adsorption ◽  
Adsorption Model ◽  
Solution Ph

Adsorption separation of phenol from aqueous solution using activated carbon was investigated in this work. The adsorbent was prepared from coconut shell and activated by physical activation method. The coconut shell was first carbonized at 800°C under nitrogen atmosphere and activated by CO2 at the same temperature for one hour. The prepared activated carbon was characterized by Scanning Electron Microscope (SEM) and BET Surface Analyzer and by the determination of iodine number as well as Boehm titration. The iodine number indicates the degree of relative activation of the adsorbent. The equilibrium adsorption isotherm phenol from aqueous solution was performed using liquid phase batch adsorption experiments. The effect of experimental parameters including solution pH, agitation time, particle size, temperature and initial concentration was investigated. The equilibrium data was analyzed using Langmuir and Freundlich adsorption model to describe the adsorption isotherm and estimate the adsorption isotherm parameters. The results indicate the potential use of the adsorbent for removal of phenol from the aqueous solution.Journal of Chemical Engineering, Vol. 29, No. 1, 2017: 9-13

scholarly journals Ricinus CommunisPericarp Activated Carbon Used as an Adsorbent for the Removal of Ni(II) From Aqueous Solution

2008 ◽  
Vol 5 (4) ◽  
pp. 761-769 ◽  
Author(s):  
S. Madhavakrishnan ◽  
K. Manickavasagam ◽  
K. Rasappan ◽  
P. S. Syed Shabudeen ◽  
R. Venkatesh ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Particle Size ◽  
Activated Carbon ◽  
Contact Time ◽  
Metal Ion ◽  
Ricinus Communis ◽  
Ion Concentration ◽  
Batch Mode ◽  
Adsorption Data ◽  
Initial Ph

Activated carbon prepared from Ricinus communis Pericarp was used to remove Ni(II) from aqueous solution by adsorption. Batch mode adsorption experiments are carried out by varying contact time, metal-ion concentration, carbon concentration and pH to assess kinetic and equilibrium parameters. The adsorption data were modeled by using both Langmuir and Freundlich classical adsorption isotherms. The adsorption capacity (Qo) calculated from the Langmuir isotherm was 31.15 mg/g of activated carbon at initial pH of 5.0±0.2 for the particle size 125-250 µm.

Investigation of mercury cyanide adsorption from synthetic wastewater aqueous solution on granular activated carbon

2020 ◽  
Vol 34 ◽  
pp. 101154 ◽  
Author(s):  
Paula Aliprandini ◽  
Marcello M. Veiga ◽  
Bruce G. Marshall ◽  
Tatiana Scarazzato ◽  
Denise C.R. Espinosa
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Granular Activated Carbon ◽  
Synthetic Wastewater

scholarly journals Removal of cadmium from aqueous solutions using excised leaves of Quetta pine (Pinus halepensis Mill.)

2015 ◽  
Vol 43 (3) ◽  
pp. 277-281 ◽  
Author(s):  
M Rahman ◽  
S Gul ◽  
M Ajmal ◽  
A Iqbal ◽  
Akk Achakzai
Keyword(s):  
Aqueous Solution ◽  
Contact Time ◽  
Pinus Halepensis ◽  
Freundlich Isotherm ◽  
Batch Adsorption ◽  
Adsorption Efficiency ◽  
Cadmium Removal ◽  
Optimum Ph ◽  
Maximum Contact ◽  
Adsorbent Dose

Removal of cadmium from aqueous solution was studied by using Quetta pine (Pinus halepensis Mill.) leaves. Batch adsorption experiments were performed as a function of appropriate equilibrium time, pH, concentration of adsorbate and amount of adsorbent. The optimum pH required for maximum adsorption was found to be 7.0 and the maximum contact time for the equilibrium was 30 minutes at adsorbent dose of 10 g. The maximum adsorption efficiency of cadmium removal was 98.50%. The results were better fitted by Langmuir than Freundlich isotherm. The separation factor of equilibrium 0.12 and 0.67 showed that Quetta pine leaves are good adsorbent of cadmium from aqueous solution DOI: http://dx.doi.org/10.3329/bjb.v43i3.21598 Bangladesh J. Bot. 43(3): 277-281, 2014 (December)

Sign in / Sign up

Export Citation Format

Share Document