scholarly journals Quantitative analysis of perindopril erbumine in pharmaceutical preparations by spectrophotometry via ternary complex formation with Zn(II) and eosin and charge transfer complexation with iodine

2011 ◽  
Vol 25 (2) ◽  
pp. 123-136 ◽  
Author(s):  
Nafisur Rahman ◽  
Habibur Rahman
Keyword(s):  
Charge Transfer ◽  
Ternary Complex ◽  
Pharmaceutical Preparations ◽  
Reference Method ◽  
Molar Absorptivity ◽  
Experimental Conditions ◽  
Spectrophotometric Methods ◽  
Significant Difference ◽  
Comparison Of The Results ◽  
Charge Transfer Complexation

Two simple, sensitive and accurate spectrophotometric methods have been developed for the analysis of perindopril in pharmaceutical preparations. Method A is based on the formation of ternary complex between zinc(II), eosin and the perindopril, which is extractable with chloroform. The absorption spectrum exhibits a band peaking at 510 nm. Method B is based on the interaction of drug with iodine in dichloromethane resulting in the formation of charge transfer complex which absorbs maximally at 365 nm. Beer's law is obeyed in the concentration range 10–200 μg/ml and 10–180 μg/ml with molar absorptivity of 2.25×103and 3.71×103l/mol·cm for methods A and B, respectively. The detection limits for methods A and B are 0.49 and 0.90 μg/ml, respectively. The optimum experimental conditions for the proposed procedures are investigated. Statistical comparison of the results with the reference method shows excellent agreement and indicates no significant difference between the methods compared in terms of accuracy and precision.

scholarly journals Indirect spectrophotometric determination of diltiazem hydrochloride in pure form and pharmaceutical formulations

2005 ◽  
Vol 3 (3) ◽  
pp. 520-536 ◽  
Author(s):  
Akram El-Didamony
Keyword(s):  
Reference Method ◽  
Pharmaceutical Formulations ◽  
Molar Absorptivity ◽  
Pure Form ◽  
Diltiazem Hydrochloride ◽  
Spectrophotometric Methods ◽  
Chromotrope 2R ◽  
Significant Difference ◽  
Comparison Of The Results

AbstractThree simple, accurate, and sensitive spectrophotometric methods (A, B and C) have been described for the indirect assay of diltiazem hydrochloride (DIL.HCl), either in pure form or in pharmaceutical formulations. The first method (A) is based on the oxidation of DIL.HCl by N-bromosuccinimide (NBS) and determination of unconsumed NBS by measuring the decrease in absorbance of amaranth dye (AM) at a suitable λmax=521 nm. Other methods (B) and (C) involve the addition of excess cerric ammonium sulfate (CAS) and subsequent determination of the unconsumed oxidant by a decrease in the red color of chromotrope 2R (C2R) at a suitable λmax=528 nm or a decrease in the orange-pink color of rhodamine 6G (Rh6G) at λmax=525 nm, respectively. Regression analysis of Beer-Lambert plots showed good correlation in the concentration ranges 3.0–9.0, 3.5–7.0 and 3.5–6.3 μg ml−1 for methods A, B and C, respectively. The apparent molar absorptivity, Sandell's sensitivity, detection and quantification limits were calculated. The proposed methods have been applied successfully for the analysis of the drug in its pure form and its dosage form. No interference was observed from a common pharmaceutical adjuvant. Statistical comparison of the results with the reference method shows excellent agreement and indicates no significant difference in accuracy and precision.

scholarly journals Titrimetric and Spectrophotometric Assay of Oxcarbazepine in Pharmaceuticals Using N-Bromosuccinimide and Bromopyrogallol Red

2011 ◽  
Vol 2011 ◽  
pp. 1-8
Author(s):  
Nagaraju Rajendraprasad ◽  
Kanakapura Basavaiah ◽  
Kanakapura B. Vinay
Keyword(s):  
Spectrophotometric Method ◽  
Reference Method ◽  
Standard Addition ◽  
Molar Absorptivity ◽  
Spectrophotometric Methods ◽  
Bromopyrogallol Red ◽  
Accuracy And Precision ◽  
Significant Difference ◽  
Comparison Of The Results

Titrimetric and spectrophotometric methods are described for the determination of oxcarbazepine (OXC) in bulk drug and in tablets. The methods use N-bromosuccinimide (NBS) and bromopyrogallol red (BPR) as reagents. In titrimetry (method A), an acidified solution of OXC is titrated directly with NBS using methyl orange as indicator. Spectrophotometry (method B) involves the addition of known excess of NBS to an acidified solution of OXC followed by the determination of the unreacted NBS by reacting with BPR and measuring the absorbance of the unreacted dye at 460 nm. Titrimetry allows the determination of 6–18 mg of OXC and follows a reaction stoichiometry of 1 : 1 (OXC : NBS), whereas spectrophotometry is applicable over the concentration range of 0.8–8.0 μg mL-1. Method B with a calculated molar absorptivity of2.52×104 L mol-1 cm-1is the most sensitive spectrophotometric method ever developed for OXC. The optical characteristics such as limits of detection (LOD), quantification (LOQ), and Sandell's sensitivity values are also reported for the spectrophotometric method. The accuracy and precision of the methods were studied on intraday and interday basis. The methods described could usefully be applied to routine quality control of tablets containing OXC. No interference was observed from common pharmaceutical adjuvants. Statistical comparison of the results with a reference method shows an excellent agreement and indicates no significant difference in accuracy and precision. The reliability of the methods was further ascertained by recovery studies in standard addition procedure.

scholarly journals Spectrophotometric Determination of Zidovudine in Pharmaceuticals Based on Charge-Transfer Complexation Involving N-Bromosuccinimide, Metol and Sulphanilic Acid as Reagents

2007 ◽  
Vol 4 (2) ◽  
pp. 173-179 ◽  
Author(s):  
K. Basavaiah ◽  
U. R. Anil Kumar
Keyword(s):  
Limit Of Detection ◽  
Pharmaceutical Preparations ◽  
Reference Method ◽  
Standard Addition ◽  
Molar Absorptivity ◽  
Sulphanilic Acid ◽  
Bulk Drug ◽  
Student’S T ◽  
Charge Transfer Complexation

A simple spectrophotometric method is proposed for the determination of zidovudine(ZDV) in bulk drug and in pharmaceutical preparations. The method is based on the oxidation of ZDV by a known excess of oxidant N-bromosuccinimide (NBS), in buffer medium of pH 1.5, followed by the estimation of unreacted amount of oxidant with metol and sulphanilic acid. The reacted oxidant corresponds to the amount ZDV. The purple-red reaction product absorbs maximally at 530 nm and Beer’s law is obeyed over a range 5 to 75 μg mL-1. The apparent molar absorptivity is calculated to be 5.1×103L mol-1cm-1, and the corresponding Sandell sensitivity value is 0.052 μg cm-2. The limit of detection and quantification are found to be 0.90 and 2.72, respectively. Intra-day and inter-day precision and accuracy of the developed methods were evaluated as per the current ICH guidelines. The method was successfully applied to the assay of ZDV in tablet/capsule preparations and the results were statistically compared with those of the reference method by applying the Student’s t-test and F-test. No interference was observed from the common tablet/capsule excipients. The accuracy of the method was further ascertained by performing recovery studies via standard-addition method.

scholarly journals Cerimetric determination of simvastatin in pharmaceuticals based on redox and complex formation reactions

2018 ◽  
Vol 33 (2) ◽  
pp. 21
Author(s):  
Kanakapura Basavaiah ◽  
Okram Zenita Devi
Keyword(s):  
Limit Of Detection ◽  
Reference Method ◽  
Standard Addition ◽  
Molar Absorptivity ◽  
Experimental Conditions ◽  
Spectrophotometric Methods ◽  
Fixed Quantity ◽  
Bulk Drug ◽  
Student’S T

Two sensitive spectrophotometric methods are described for the determination of simvastatin (SMT) in bulk drug and in tablets. The methods are based on the oxidation of SMT by a measured excess of cerium (IV) in acid medium followed by determination of unreacted oxidant by two different reaction schemes. In one procedure (method A), the residual cerium (IV) is reacted with a fixed concentration of ferroin and the increase in absorbance is measured at 510 nm. The second approach (method B) involves thereduction of the unreacted cerium (IV) with a fixed quantity of iron (II), and the resulting iron (III) is complexed with thiocyanate and the absorbance measured at 470 nm. In both methods, the amount of cerium (IV) reacted corresponds to SMT concentration. The experimental conditions for both methods were optimized. In method A, the absorbance is found to increase linearly with SMT concentration (r = 0.9995) whereas in method B, the same decreased (r = -0.9943). The systems obey Beer’s law for 0.6-7.5 and 0.5-5.0 μg mL-1 for method A and method B, respectively. The calculated molar absorptivity values are 2.7 X 104 and 1.06 X 105 Lmol-1 cm-1, respectively; and the corresponding sandel sensitivity values are 0.0153 and 0.0039μg cm-2, respectively. The limit of detection (LOD) and quantification (LOQ) are reported for both methods. Intra-day and inter-day precision, and accuracy of the methods were established as per the current ICH guidelines. The methods were successfully applied to the determination of SMT in tablets and the results were statistically compared with those of the reference method by applying the Student’s t-test and F-test. No interference was observed from the common excipients added to tablets. The accuracy and validity of the methods were further ascertained by performing recovery experiments via standard addition procedure.

scholarly journals SPECTROPHOTOMETRIC METHODS FOR DETERMINATION OF SOFOSBUVIR AND DACLATASVIR IN PURE AND DOSAGE FORMS

2021 ◽  
pp. 112-119
Author(s):  
MONIR Z. SAAD ◽  
ATEF AMER ◽  
KHALED ELGENDY ◽  
BASEM ELGENDY
Keyword(s):  
Indigo Carmine ◽  
Reference Method ◽  
Standard Addition ◽  
Pharmaceutical Formulations ◽  
Molar Absorptivity ◽  
Experimental Conditions ◽  
Fixed Amount ◽  
Alizarin Red ◽  
Spectrophotometric Methods

Objective: Two simple, sensitive and accurate spectrophotometric methods have been developed for the determination of sofosbuvir (SOF) and daclatasvir (DAC) in pure forms and pharmaceutical formulations. Methods: The proposed methods are based on the oxidation of SOF and DAC by a known excess of cerium(IV) ammonium nitrate in sulphuric acid medium followed by determination of unreacted cerium(IV) by adding a fixed amount of indigo carmine (IC) and alizarin red S (ARS) dyes followed by measuring the absorbance at 610 and 360 nm, respectively. The experimental conditions affecting the reaction were studied and optimized. Results: The beer’s law was obeyed in the concentration ranges of 0.2-3.0, 0.2-4.0 for SOF and 0.5-4.5 and 0.5-5.0 μg/ml for DAC using IC and ARS methods, respectively with a correlation coefficient ≥ 0.9991. The calculated molar absorptivity values are 2.354 × 104, 1.933 × 104 for SOF and 1.786 × 104 and 2.015 × 104 L/mol. cm for DAC using IC and ARS methods, respectively u. The limits of detection and quantification are also reported. Intra-day and inter-day precision and accuracy of the methods have been evaluated. Conclusion: The methods were successfully applied to the assay of SOF and DAC in tablets and the results were statistically compared with those of the reference method by applying Student’s t-test and F-test. No interference was observed from the common tablet excipients. The accuracy and reliability of the methods were further ascertained by performing recovery studies using the standard addition method.

scholarly journals Spectrophotometric Methods for the Assay of Pyrilamine Maleate Using Chromogenic Reagents

2010 ◽  
Vol 7 (4) ◽  
pp. 1507-1513 ◽  
Author(s):  
V. Annapurna ◽  
G. Jyothi ◽  
V. Nagalakshmi ◽  
B. B. V. Sailaja
Keyword(s):  
Charge Transfer ◽  
Oxidative Coupling ◽  
Coupling Reaction ◽  
Pharmaceutical Formulations ◽  
Molar Absorptivity ◽  
Method Of Least Squares ◽  
Spectrophotometric Methods ◽  
Oxidative Coupling Reaction ◽  
Charge Transfer Complexation

Simple, accurate and reproducible UV spectrophotometric methods were established for the assay of pyrilamine maleate (PYRA) based on the formation of oxidative coupling and precipitation, charge transfer complexation products. Method A includes the oxidative coupling reaction of PYRA with 3-methyl-2-benzathiazolinone hydrazone (MBTH) in presence of Ce(IV). The formation of oxidative coupling product with 4-amino phenazone (4-AP) in presence of K3Fe(CN)6is incorporated in method B. Precipitation/charge transfer complex formation of the PYRA with tannic acid (TA)/Metol-Cr(VI) in method C were proposed. The optical characteristics such as Beers law limits, molar absorptivity and Sandell’s sensitivity for the methods (A-C) are given. Regression analysis using the method of least squares was made to evaluate the slope (b), intercept (a) and correlation coefficient (r) and standard error of estimation (Se) for each system. Determination of pyrilamine in bulk form and in pharmaceutical formulations were also incorporated.

scholarly journals Kinetic Spectrophotometric Determination of Gemifloxacin Mesylate and Moxifloxacin Hydrochloride in Pharmaceutical Preparations Using 4-Chloro-7-nitrobenzo-2-oxa-1,3-diazole

2014 ◽  
Vol 2014 ◽  
pp. 1-12 ◽  
Author(s):  
Mohammed G. Abdel Wahed ◽  
Ragaa El Sheikh ◽  
Ayman A. Gouda ◽  
Sayed Abou Taleb
Keyword(s):  
Limit Of Detection ◽  
Kinetic Method ◽  
Pharmaceutical Preparations ◽  
Fixed Time ◽  
Spectrophotometric Methods ◽  
Relative Standard ◽  
Significant Difference ◽  
Kinetic Spectrophotometric ◽  
Comparison Of The Results

Simple, sensitive, and accurate kinetic spectrophotometric method was proposed for the determination of gemifloxacin mesylate (GMF) and moxifloxacin hydrochloride (MOX) in pure forms and pharmaceutical preparations (tablets). The method is based on coupling the studied drugs with 4-chloro-7-nitrobenzo-2-oxa-1,3-diazole (NBD-Cl) in the presence of alkaline borate buffer. Spectrophotometric measurement was achieved by recording the absorbance at 466 and 464 nm for GMF and MOX, respectively, after a fixed time of 20 and 15 min on a water bath adjusted at 70 ± 5°C for both drugs. The different experimental parameters affecting the development and stability of the color were carefully studied and optimized. The absorbance-concentration plots were linear over the ranges 0.5–8.0 and 2.0–12 μg mL−1for GMF and MOX, respectively. The limit of detection of the kinetic method was about 0.12 (2.47 × 10−7 M) and 0.36 (8.22 × 10−7 M) μg mL−1for GMF and MOX, respectively. The proposed methods have been applied and validated successfully with percentage relative standard deviation (RSD% ≤ 0.52) as precision and percentage relative error (RE% ≤ 1.33) as accuracy. The robustness of the proposed method was examined with recovery values that were 97.5–100.5 ± 1.3–1.9%. Statistical comparison of the results with the reference spectrophotometric methods shows excellent agreement and indicates no significant difference in accuracy or precision.

scholarly journals Simple Methods for the Spectrophotometric Determination of Carvedilol

2012 ◽  
Vol 2012 ◽  
pp. 1-6
Author(s):  
Divya N. Shetty ◽  
B. Narayana
Keyword(s):  
Charge Transfer ◽  
Complex Formation ◽  
Confidence Level ◽  
Charge Transfer Complex ◽  
Condensation Reaction ◽  
Pharmaceutical Preparations ◽  
Molar Absorptivity ◽  
Spectrophotometric Methods ◽  
Accuracy And Precision

Two simple spectrophotometric methods are described for the determination of carvedilol (CAR). Method A is the condensation reaction of CAR with p-dimethylaminobenzaldehyde (PDAB), and the reaction mixture exhibits maximum absorbance at 601 nm. Method B is based on the charge transfer complex formation of CAR with p-chloranil; the color developed is measured at 662 nm. The calibration graphs are found to be linear over 50.00–250.00 and 20.00–100.0 μg mL−1 with molar absorptivity values of 0.92×103 and 0.257×104 L mol−1cm−1 for CAR-PDAB and CAR-p-chloranil, respectively. Statistical comparisons of the results are performed with regard to accuracy and precision using Student’s t-test and F-test at 95% confidence level. The methods are successfully employed for the determination of CAR in pharmaceutical preparations, and the results agree favorably with the reference and proposed methods.

scholarly journals Use of Charge Transfer Complexation Reactions for the Spectrophotometric Determination of Sumatriptan in Pharmaceuticals

2012 ◽  
Vol 2012 ◽  
pp. 1-10
Author(s):  
Kudige N. Prashanth ◽  
Basavaiah Kanakapura ◽  
Madihalli S. Raghu ◽  
Kanakapura B. Vinay
Keyword(s):  
Charge Transfer ◽  
Correlation Coefficients ◽  
Molar Absorptivity ◽  
Spectrophotometric Methods ◽  
Ct Complex ◽  
Reaction Stoichiometry ◽  
Complexation Reactions ◽  
Charge Transfer Complexation ◽  
Job's Method

Studies were carried out to use the charge-transfer reactions of sumatriptan (SMT), extracted from neutralized sumatriptan succinate (STS), as n-electron donor with the π-acceptor, 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) and σ-acceptor, and iodine (I2). The formation of the colored complexes was utilized for the development of simple, rapid, and accurate spectrophotometric methods for the determination of SMT in pure form as well as in its tablets. The quantification of colored products was made spectrophotometrically at 585 nm for the CT complex formed between SMT and DDQ (DDQ method) and at 375 nm for the CT complex formed between SMT and I2 (I2 method). Beer’s law is obeyed over the concentration ranges of 4.0–56.0 μg mL−1 and 2.0–28.0 for DDQ and I2, respectively, with correlation coefficients () of 0.9997 and 0.9998. The analytical parameters such as apparent molar absorptivity, Sandell’s sensitivities, and limits of detection (LOD) and quantification (LOQ) are also reported for both methods. The described methods were successfully applied to the determination of SMT in tablets. No interference was observed from the common excipients present in tablets. The reaction stoichiometry in both methods was evaluated by Job’s method of continuous variations and was found to be 1 : 1 (donor : acceptor).

scholarly journals Of bromination reaction for the spectrophotometric assay of domperidone in pharmaceuticals

2011 ◽  
Vol 17 (1) ◽  
pp. 81-89 ◽  
Author(s):  
Zenita Devi ◽  
K. Basavaiah ◽  
K.B. Vinay
Keyword(s):  
Limit Of Detection ◽  
Pharmaceutical Preparations ◽  
Reference Method ◽  
Standard Addition ◽  
Limit Of Quantification ◽  
Fixed Amount ◽  
Spectrophotometric Methods ◽  
Significant Difference ◽  
Bulk Drug

Three simple and sensitive spectrophotometric methods are described for the determination of domperidone (DOM) in bulk drug and in dosage forms using bromate-bromide mixture as brominating agent in acid medium and three dyes, meta-cresol purple (MCP), amaranth (AMR) and erioglaucine (EGC). The methods involve the addition of a known excess of bromate-bromide mixture to an acidified solution of DOM followed by the determination of the residual bromine by reacting with a fixed amount of either MCP dye and measuring the absorbance at 530 nm (method A) or AMR dye and measuring the absorbance at 520 nm (method B) or EGC dye and measuring the absorbance at 630 nm (method C). Beer?s law is obeyed over the concentration ranges, 0.63 - 10.0, 0.25-4.0 and 0.13-2.0 ?g mL-1 for method A, method B and method C, respectively. The apparent molar absorptivities are calculated to be 3.751 ? 104, 6.604 ? 104 and 1.987 ? 105 L mol-1cm-1 for method A, method B and method C, respectively and the corresponding sandell sensitivity values are 0.011, 0.006 and 0.002 ?g cm-2. The limit of detection and the limit of quantification are also reported for all the three methods. No interference was observed from common additives found in pharmaceutical preparations. Statistical comparisons of the results with those of the reference method showed an excellent agreement, and indicated no significant difference in accuracy and precision. The accuracy and reliability of the methods were further ascertained by performing recovery tests via standard-addition technique.

Sign in / Sign up

Export Citation Format

Share Document