scholarly journals Retention Characteristics of CBTi144 Thin Films Explained by Means of X-Ray Photoemission Spectroscopy

2010 ◽  
Vol 2010 ◽  
pp. 1-7 ◽  
Author(s):  
G. Biasotto ◽  
A. Z. Simões ◽  
C. S. Riccardi ◽  
M. A. Zaghete ◽  
E. Longo ◽  
...  
Keyword(s):  
Thin Films ◽  
Polar Axis ◽  
Photoemission Spectroscopy ◽  
X Ray Diffraction ◽  
Axis Orientation ◽  
X Ray ◽  
Si Substrates ◽  
Transmission Electron ◽  
Coating Method ◽  
Retention Characteristics

CaBi4Ti4O15(CBTi144) thin films were grown on Pt/Ti/SiO2/Si substrates using a soft chemical solution and spin-coating method. Structure and morphology of the films were characterized by the X-ray Diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), Raman analysis, X-ray photoemission spectroscopy (XPS), and transmission electron microscopy (TEM). The films present a single phase of layered-structured perovskite with polar axis orient. Thea/b-axis orientation of the ferroelectric film is considered to be associated with the preferred orientation of the Pt bottom electrode. XPS measurements were employed to understand the nature of defects on the retention behavior of CBTi144 films. We have observed that the main source of retention-free characteristic of the capacitors is the oxygen environment in the CBTi144 lattice.

FERROMAGNETISM IN Fe-DOPED ZnO THIN FILMS

2009 ◽  
Vol 23 (06) ◽  
pp. 815-824 ◽  
Author(s):  
R. B. ZHAO ◽  
D. L. HOU ◽  
Y. Y. WEI ◽  
Z. Z. ZHOU ◽  
C. F. PAN ◽  
...  
Keyword(s):  
Thin Films ◽  
Photoelectron Spectroscopy ◽  
Exchange Coupling ◽  
Room Temperature ◽  
Room Temperature Ferromagnetism ◽  
X Ray Diffraction ◽  
Axis Orientation ◽  
X Ray ◽  
Si Substrates ◽  
Fe Ions

Zn 1-x Fe x O (x = 0.04, 0.06, 0.08, 0.10, 0.12) thin films were grown on Si substrates using reactive magnetron sputtering. X-ray diffraction analyses show that the samples have wurtzite structures with the c-axis orientation. X-ray photoelectron spectroscopy results indicate that the Fe ions are in a +2 charge state in the films. Magnetization measurements indicate that room temperature ferromagnetism is present in films annealed in vacuum while films annealed in air were non-magnetic. The presence of oxygen vacancies in these films may mediate exchange coupling of the dopant ions, resulting in room temperature ferromagnetism.

Characterization of Pb(ScTa)1−xTixO3 (x<0.3) Thin Films Grown on LaNiO3 Coated Si by MOCVD

1998 ◽  
Vol 541 ◽  
Author(s):  
C. H. Lin ◽  
H. C. Kuo ◽  
G. E. Stillman ◽  
Haydn Chen
Keyword(s):  
Thin Films ◽  
Electron Microscope ◽  
Chemical Vapor ◽  
Organic Chemical ◽  
X Ray Diffraction ◽  
X Ray ◽  
Si Substrates ◽  
Transmission Electron ◽  
Metal Organic

AbstractHighly (100) textured pseudo-cubic Pb(ScTa)1−xTixO3 (x=0-0.3) (PSTT) thin films were grown by metal-organic chemical vapor deposition (MOCVD) on LaNiO3 (LNO) electrode buffered Si substrates at 650 °C. The microstructure and chemical uniformity were studied using X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM) and nanoprobe X-ray energy dispersive spectroscopy (EDS). The temperature dependence of dielectric properties and P-E behavior were measured. A shift of Curie temperature of these PST-based thin films due to Ti addition was demonstrated, Furthermore, the pyroelectric properties of these thin films were estimated.

Palladium Nanowire Thin Films via Template Growth

2003 ◽  
Vol 775 ◽  
Author(s):  
Donghai Wang ◽  
David T. Johnson ◽  
Byron F. McCaughey ◽  
J. Eric Hampsey ◽  
Jibao He ◽  
...  
Keyword(s):  
Thin Film ◽  
Electron Microscopy ◽  
Thin Films ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Conductive Substrate ◽  
Palladium Nanowires ◽  
Efficient Route ◽  
Silica Thin Film

AbstractPalladium nanowires have been electrodeposited into mesoporous silica thin film templates. Palladium continually grows and fills silica mesopores starting from a bottom conductive substrate, providing a ready and efficient route to fabricate a macroscopic palladium nanowire thin films for potentially use in fuel cells, electrodes, sensors, and other applications. X-ray diffraction (XRD) and transmission electron microscopy (TEM) indicate it is possible to create different nanowire morphology such as bundles and swirling mesostructure based on the template pore structure.

Limitations to the use of Sb as a Surfactant During SiGe MBE

1998 ◽  
Vol 533 ◽  
Author(s):  
Glenn G. Jernigan ◽  
Conrad L. Silvestre ◽  
Mohammad Fatemi ◽  
Mark E. Twigg ◽  
Phillip E. Thompson
Keyword(s):  
Electron Microscopy ◽  
Thin Films ◽  
Transmission Electron Microscopy ◽  
Quantum Well ◽  
Photoelectron Spectroscopy ◽  
Surface Coverage ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Alloy Concentration

AbstractThe use of Sb as a surfactant in suppressing Ge segregation during SiGe alloy growth was investigated as a function of Sb surface coverage, Ge alloy concentration, and alloy thickness using xray photoelectron spectroscopy, x-ray diffraction, and transmission electron microscopy. Unlike previous studies where Sb was found to completely quench Ge segregation into a Si capping layer, we find that Sb can not completely prevent Ge segregation while Si and Ge are being co-deposited. This results in the production of a non-square quantum well with missing Ge at the beginning and extra Ge at the end of the alloy. We also found that Sb does not relieve strain in thin films but does result in compositional or strain variations within thick alloy layers.

Epitaxial Growth of Aluminum Nitride on Sapphire and Silicon

1994 ◽  
Vol 358 ◽  
Author(s):  
K. Dovidenko ◽  
S. Oktyabrsky ◽  
J. Narayan ◽  
M. Razeghi
Keyword(s):  
Epitaxial Growth ◽  
Substrate Surface ◽  
Wide Band ◽  
X Ray Diffraction ◽  
Wide Band Gap ◽  
High Quality ◽  
Microstructural Characteristics ◽  
X Ray ◽  
Si Substrates ◽  
Transmission Electron

ABSTRACTThe microstructural characteristics of wide band gap semiconductor, hexagonal A1N thin films on Si(100), (111), and sapphire (0001) and (10ī2) were studied by transmission electron microscopy (TEM) and x-ray diffraction. The films were grown by MOCVD from TMA1 + NH3 + N2 gas mixtures. Different degrees of film crystallinity were observed for films grown on α-A12O3 and Si substrates in different orientations. The epitaxial growth of high quality single crystalline A1N film on (0001) α-Al2O3 was demonstrated with a dislocation density of about 2*10 10cm−2 . The films on Si(111) and Si(100) substrates were textured with the c-axis of A1N being perpendicular to the substrate surface.

Epitaxial BaTiO3 Thin Films on Different Substrates for Optical Waveguide Applications

1999 ◽  
Vol 597 ◽  
Author(s):  
M. Siegert ◽  
Judit G. Lisoni ◽  
C. H. Lei ◽  
A. Eckau ◽  
W. Zander ◽  
...  
Keyword(s):  
Thin Films ◽  
Optical Waveguides ◽  
Rutherford Backscattering Spectrometry ◽  
Optical Data ◽  
X Ray Diffraction ◽  
X Ray ◽  
Force Microscopy ◽  
Ion Channeling ◽  
Atomic Force ◽  
Transmission Electron

AbstractIn the process of developing thin film electro-optical waveguides we investigated the influence of different substrates on the optical and structural properties of epitaxial BaTiO3 thin films. These films are grown by on-axis pulsed laser deposition (PLD) on MgO(100), MgAl2O4(100), SrTiO3(100) and MgO buffered A12O3(1102) substrates. The waveguide losses and the refractive indices were measured with a prism coupling setup. The optical data are correlated to the results of Rutherford backscattering spectrometry/ion channeling (RBS/C). X-ray diffraction (XRD), atomic force microscopy (AFM) and transmission electron microscopy (TEM). BaTiO3 films on MgO(100) substrates show planar waveguide losses of 3 dB/cm and ridge waveguide losses of 5 dB/cm at a wavelength of 633 nm.

Structural and Electrical Properties of Colossal Magnetoresistive LSMO Thin Films Prepared by KrF Laser Ablation Method

2001 ◽  
Vol 666 ◽  
Author(s):  
Fumiaki Mitsugi ◽  
Tomoaki Ikegami ◽  
Kenji Ebihara ◽  
Jagdish Narayan ◽  
Alexander M. Grishin
Keyword(s):  
Thin Films ◽  
Laser Ablation ◽  
Electrical Properties ◽  
Lattice Mismatch ◽  
X Ray Diffraction ◽  
Axis Orientation ◽  
X Ray ◽  
Colossal Magnetoresistive ◽  
Laser Ablation Method ◽  
Structural And Electrical Properties

ABSTRACTWe prepared colossal magnetoresistive La0.8Sr0.2MnO3 thin films on the MgO, SrTiO3 and LaAlO3 single crystal substrates using KrF excimer pulsed laser ablation technique. The structural and electrical properties of the La0.8Sr0.2MnO3 thin films which were strained by the lattice mismatch are reported. The in-plane lattice mismatch between the La0.8Sr0.2MnO3 and MgO, SrTiO3 and LaAlO3 substrates are -7.8 %, -0.5 % and +2.3 %, respectively. The X-ray diffraction spectra of the films exhibited c-axis orientation. In the case of the La0.8Sr0.2MnO3 / LaAlO3 thin films with thickness over 100 nm, the divided (00l) peaks were observed. The surface morphology and transport property of the strongly stressed La0.8Sr0.2MnO3 / LaAlO3 were different from those of La0.8Sr0.2MnO3 / MgO and La0.8Sr0.2MnO3 / SrTiO3thin films.

TEM Study of FePt and FePt:C/FePt Composite Double-Layered Thin Films

2013 ◽  
Vol 275-277 ◽  
pp. 1952-1955
Author(s):  
Ling Fang Jin ◽  
Xing Zhong Li
Keyword(s):  
Electron Microscopy ◽  
Thin Films ◽  
Transmission Electron Microscopy ◽  
Grain Size ◽  
Magnetic Properties ◽  
Composite Layer ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron

New functional nanocomposite FePt:C thin films with FePt underlayers were synthesized by noneptaxial growth. The effect of the FePt layer on the ordering, orientation and magnetic properties of the composite layer has been investigated by adjusting FePt underlayer thickness from 2 nm to 14 nm. Transmission electron microscopy (TEM), together with x-ray diffraction (XRD), has been used to check the growth of the double-layered films and to study the microstructure, including the grain size, shape, orientation and distribution. XRD scans reveal that the orientation of the films was dependent on FePt underlayer thickness. In this paper, the TEM studies of both single-layered nonepitaxially grown FePt and FePt:C composite L10 phase and double-layered deposition FePt:C/FePt are presented.

Study on integration of aluminum-doped zinc oxide (AZO) thin films with graphene oxide (GO)

2018 ◽  
Vol 32 (19) ◽  
pp. 1840044
Author(s):  
Aditya Dalal ◽  
Animesh Mandal ◽  
Shubhada Adhi ◽  
Kiran Adhi
Keyword(s):  
Thin Films ◽  
Raman Spectroscopy ◽  
Graphene Oxide ◽  
X Ray Diffraction ◽  
Visible Spectroscopy ◽  
X Ray ◽  
Transmission Electron ◽  
Vis Spectroscopy ◽  
Aluminum Doped Zinc Oxide ◽  
Uv Visible

Aluminum (0.5 at.%)-doped ZnO (AZO) thin films were deposited by pulsed laser deposition technique (PLD) in oxygen ambient of 10[Formula: see text] Torr. The deposited thin films were characterized by x-ray diffraction (XRD), photoluminescence (PL), Raman spectroscopy and uv–visible spectroscopy (UV–vis). Next, graphene oxide (GO) was synthesized by Hummers method and was characterized by XRD, UV–vis spectroscopy, Raman spectroscopy and transmission electron microscopy (TEM). Thereafter, GO solution was drop-casted on AZO thin films. These films were then characterized by Raman Spectroscopy, UV–vis spectroscopy and PL. Attempt is being made to comprehend the modifications in properties brought about by integration.

Sign in / Sign up

Export Citation Format

Share Document